[PATCHv2 3/6] ARM: sun4i: dt: Add i2c muxing options

[Maxime Ripard]

The i2c controller found on the Allwinner A10 has only one muxing option
available for each controller. Add them to the dtsi

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 311dcd4..63f6716 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -199,6 +199,27 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			i2c0_pins_a: i2c0 at 0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			i2c1_pins_a: i2c1 at 0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			i2c2_pins_a: i2c2 at 0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
 		};
 
 		timer at 01c20c00 {
-- 
1.8.2.3