[PATCH 0/6] Samsung watchdog support clean-up

[Tomasz Figa]

This series is aiming at cleaning up a bit watchdog support on Samsung
SoCs. The patches tweak a bit all the watchdog handling code here and
there, with the goal of making it DT- and multiplatform-friendly.

See particular patches for more detailed descriptions.

On S3C6410-based Tiny6410 board (Mini6410-compatible):

Tested-by: Tomasz Figa <tomasz.figa at gmail.com>

Depends on:
 - [PATCH] ARM: s5p64x0: Use common uncompress.h part for plat-samsung

Tomasz Figa (6):
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: SAMSUNG: uncompress: Use local definitions of watchdog registers
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header

 arch/arm/Kconfig                                   |  3 +
 arch/arm/mach-s3c24xx/Kconfig                      |  2 +
 arch/arm/mach-s3c24xx/s3c2410.c                    |  3 +-
 arch/arm/mach-s3c24xx/s3c244x.c                    |  3 +-
 arch/arm/mach-s3c64xx/common.c                     |  8 +-
 arch/arm/mach-s5p64x0/common.c                     |  4 +-
 arch/arm/mach-s5pc100/common.c                     |  3 +-
 arch/arm/plat-samsung/Kconfig                      |  6 ++
 arch/arm/plat-samsung/Makefile                     |  1 +
 arch/arm/plat-samsung/include/plat/regs-watchdog.h | 41 ---------
 arch/arm/plat-samsung/include/plat/uncompress.h    | 15 +++-
 .../arm/plat-samsung/include/plat/watchdog-reset.h | 38 ++-------
 arch/arm/plat-samsung/watchdog-reset.c             | 97 ++++++++++++++++++++++
 drivers/watchdog/s3c2410_wdt.c                     | 17 +++-
 14 files changed, 156 insertions(+), 85 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/include/plat/regs-watchdog.h
 create mode 100644 arch/arm/plat-samsung/watchdog-reset.c

-- 
1.8.2.1