[PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead

[Gregory CLEMENT]

On 05/15/2013 03:41 PM, Will Deacon wrote:
> On Wed, May 15, 2013 at 02:18:53PM +0100, Gregory CLEMENT wrote:
>> Hi Will,
> 
> Hi Gregory,
> 
>> On 03/25/2013 07:19 PM, Will Deacon wrote:
>>> Many ARMv7 cores have hardware page table walkers that can read the L1
>>> cache. This is discoverable from the ID_MMFR3 register, although this
>>> can be expensive to access from the low-level set_pte functions and is a
>>> pain to cache, particularly with multi-cluster systems.
>>>
>>> A useful observation is that the multi-processing extensions for ARMv7
>>> require coherent table walks, meaning that we can make use of ALT_SMP
>>> patching in proc-v7-* to patch away the cache flush safely for these
>>> cores.
>>
>> I encountered a regression with 3.10-rc1 on the Armada 370 based boards.
>> With the 3.10-rc1 they hang during auto testy of the xor engine which are
>> mainly DMA transfers. If I revert this patch, it no more hang. I found this
>> by using bisect, it was not obvious at all for me that this patch may have
>> cause this regression.
> 
> Is this using dmatest.ko, or a different test program?

No they are self-test from the mv_xor driver

> 
>> The issue appear in SMP and in UP. However I think that  the PJ4B-v7 used in
>>  the Armada 370 are not MP capable.
> 
> Ok, so the ALT_UP case should be emitted after patching, correct?

Indeed it was I excepted but I didn't check (I don't know how to do)

> 
>> I made some investigation. And in UP if I remove the line:
>> 	ALT_UP(W(nop))
> 
> Did you remove the ALT_SMP case as well? You could also try making the
> ALT_SMP case use W(nop) too and see if it changes anything.

OK I will try it.

> 
>> at the begining of the cpu_v7_dcache_clean_are macro located in
>> arch/arm/mm/proc-v7.S
>>
>> Then the kernel boot again. It is not surprising because in this case
>> we found the same generated code that before this patch was applied.
>>
>> now I don't really understand why a W(nop) will cause this issue.
> 
> No, that sounds weird. Can you inspect the functions using JTAG after the smp
> patching code has executed?

No I can't: I don't have any JTAG :/

> 
>> In SMP mode even with this line removed the kernel hang, but in this case
>> I am not sure of what happen exactly and how the .alt.smp.init section is
>> used.
> 
> If you don't have both of the alternatives, things will go wrong.

For my own culture, how ALT_UP and ALT_SMP work in SMP case?
When I disassembled the proc-v7.o, I saw that the SMP variant of the code were
written. How the kernel switch to the UP version of the code?

> 
>> I hope you will find some explanation and solution to this bug, because currently
>> the only solution I have is to revert this patch.
> 
> Let's not jump to that just yet!

Sure I hope we will find a fix for that.
Thanks,

Gregory
-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com