[PATCH v7] arm: use built-in byte swap function
Kim Phillips
kim.phillips at freescale.com
Thu May 23 12:46:54 EDT 2013
Enable the compiler intrinsic for byte swapping on arch ARM. This
allows the compiler to detect and be able to optimize out byte
swappings, and has a very modest benefit on vmlinux size (Linaro gcc
4.8):
text data bss dec hex filename
2840310 123932 61960 3026202 2e2d1a vmlinux-lart #orig
2840152 123932 61960 3026044 2e2c7c vmlinux-lart #builtin-bswap
6473120 314840 5616016 12403976 bd4508 vmlinux-mxs #orig
6472586 314848 5616016 12403450 bd42fa vmlinux-mxs #builtin-bswap
7419872 318372 379556 8117800 7bde28 vmlinux-imx_v6_v7 #orig
7419170 318364 379556 8117090 7bdb62 vmlinux-imx_v6_v7 #builtin-bswap
Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
Reviewed-by: Nicolas Pitre <nico at linaro.org>
Acked-by: David Woodhouse <David.Woodhouse at intel.com>
---
resending as v6 appears to have fallen though the cracks. Russell?
v7: rebased onto next-20130521, re-ran above vmlinux sizes with
Linaro gcc 4.8, added Nicolas' Reviewed-by, and David's Acked-by.
v6 and prior version information:
https://lkml.org/lkml/2013/2/22/475
arch/arm/Kconfig | 1 +
arch/arm/boot/compressed/Makefile | 15 +++++++++++----
arch/arm/kernel/armksyms.c | 4 ++++
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/bswapsdi2.S | 36 ++++++++++++++++++++++++++++++++++++
5 files changed, 53 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/lib/bswapsdi2.S
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a7fc5ea..c2fe04d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -63,6 +63,7 @@ config ARM
select OLD_SIGSUSPEND3
select OLD_SIGACTION
select HAVE_CONTEXT_TRACKING
+ select ARCH_USE_BUILTIN_BSWAP
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 198a4ad..bd8a176 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -112,12 +112,12 @@ endif
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
- lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S \
- font.o font.c head.o misc.o $(OBJS)
+ lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
+ bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
- lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs)
+ lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -159,6 +159,12 @@ ashldi3 = $(obj)/ashldi3.o
$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
$(call cmd,shipped)
+# For __bswapsi2, __bswapdi2
+bswapsdi2 = $(obj)/bswapsdi2.o
+
+$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
+ $(call cmd,shipped)
+
# We need to prevent any GOTOFF relocs being used with references
# to symbols in the .bss section since we cannot relocate them
# independently from the rest at run time. This can be achieved by
@@ -180,7 +186,8 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
fi
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
- $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE
+ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
+ $(bswapsdi2) FORCE
@$(check_for_multiple_zreladdr)
$(call if_changed,ld)
@$(check_for_bad_syms)
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 60d3b73..ba578f7 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -35,6 +35,8 @@ extern void __ucmpdi2(void);
extern void __udivsi3(void);
extern void __umodsi3(void);
extern void __do_div64(void);
+extern void __bswapsi2(void);
+extern void __bswapdi2(void);
extern void __aeabi_idiv(void);
extern void __aeabi_idivmod(void);
@@ -114,6 +116,8 @@ EXPORT_SYMBOL(__ucmpdi2);
EXPORT_SYMBOL(__udivsi3);
EXPORT_SYMBOL(__umodsi3);
EXPORT_SYMBOL(__do_div64);
+EXPORT_SYMBOL(__bswapsi2);
+EXPORT_SYMBOL(__bswapdi2);
#ifdef CONFIG_AEABI
EXPORT_SYMBOL(__aeabi_idiv);
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index af72969..5383df7 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -13,7 +13,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
ucmpdi2.o lib1funcs.o div64.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o \
- call_with_stack.o
+ call_with_stack.o bswapsdi2.o
mmu-y := clear_user.o copy_page.o getuser.o putuser.o
diff --git a/arch/arm/lib/bswapsdi2.S b/arch/arm/lib/bswapsdi2.S
new file mode 100644
index 0000000..2ba43a0
--- /dev/null
+++ b/arch/arm/lib/bswapsdi2.S
@@ -0,0 +1,36 @@
+#include <linux/linkage.h>
+
+#if __LINUX_ARM_ARCH__ >= 6
+ENTRY(__bswapsi2)
+ rev r0, r0
+ bx lr
+ENDPROC(__bswapsi2)
+
+ENTRY(__bswapdi2)
+ rev r3, r0
+ rev r0, r1
+ mov r1, r3
+ bx lr
+ENDPROC(__bswapdi2)
+#else
+ENTRY(__bswapsi2)
+ eor r3, r0, r0, ror #16
+ mov r3, r3, lsr #8
+ bic r3, r3, #0xff00
+ eor r0, r3, r0, ror #8
+ mov pc, lr
+ENDPROC(__bswapsi2)
+
+ENTRY(__bswapdi2)
+ mov ip, r1
+ eor r3, ip, ip, ror #16
+ eor r1, r0, r0, ror #16
+ mov r1, r1, lsr #8
+ mov r3, r3, lsr #8
+ bic r3, r3, #0xff00
+ bic r1, r1, #0xff00
+ eor r1, r1, r0, ror #8
+ eor r0, r3, ip, ror #8
+ mov pc, lr
+ENDPROC(__bswapdi2)
+#endif
--
1.8.1.5
More information about the linux-arm-kernel
mailing list