[PATCH] ARM: imx: Remove mxc specific ulpi access ops

[Markus Pargmann]

On Thu, May 30, 2013 at 10:46:04PM +0800, Shawn Guo wrote:
> On Thu, May 30, 2013 at 02:44:55PM +0200, Markus Pargmann wrote:
> > There are ulpi access ops implemented in drivers/usb/phy/phy-ulpi.c.
> > mxc access ops implement the same access operations within mach-imx. This
> > patch removes the mxc ulpi file and uses phy-ulpi instead for
> > imx_otg_ulpi_create.
> > 
> > phy-ulpi successfully tested with i.MX27 Phytec phyCARD-S (pca100).
> > 
> > Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
> > Acked-by: Sascha Hauer <s.hauer at pengutronix.de>
> > ---
> >  arch/arm/mach-imx/Kconfig       |   1 +
> >  arch/arm/mach-imx/Makefile      |   1 -
> >  arch/arm/mach-imx/mach-pca100.c |   4 +-
> >  arch/arm/mach-imx/ulpi.c        | 118 ----------------------------------------
> >  arch/arm/mach-imx/ulpi.h        |   9 ++-
> >  5 files changed, 9 insertions(+), 124 deletions(-)
> >  delete mode 100644 arch/arm/mach-imx/ulpi.c
> > 
> > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> > index ba44328..ca59799 100644
> > --- a/arch/arm/mach-imx/Kconfig
> > +++ b/arch/arm/mach-imx/Kconfig
> > @@ -58,6 +58,7 @@ config MXC_USE_EPIT
> >  
> >  config MXC_ULPI
> >  	bool
> > +	select USB_ULPI_VIEWPORT
> 
> Is MXC_ULPI still used anywhere after you remove ulpi.c in the patch?
> You are even patching it, so I'm a little confused.

No it is not used anywhere else. I removed it and replaced all
occurences with USB_ULPI_VIEWPORT.

Thanks,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |