[PATCH 24/39] ARM: u300: push down syscon registers
Linus Walleij
linus.walleij at stericsson.com
Fri May 31 05:18:59 EDT 2013
From: Linus Walleij <linus.walleij at linaro.org>
Get rid of the <mach/syscon.h> header as a prerequisite for
multiplatform support. Do this by pushing the registers down
to their respective drivers and deleting the unused remainder.
Acked-by: Mike Turquette <mturquette at linaro.org>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/mach-u300/core.c | 26 +-
arch/arm/mach-u300/include/mach/syscon.h | 592 -------------------------------
arch/arm/mach-u300/regulator.c | 9 +-
drivers/clk/clk-u300.c | 343 +++++++++++++++++-
4 files changed, 373 insertions(+), 597 deletions(-)
delete mode 100644 arch/arm/mach-u300/include/mach/syscon.h
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 13d4812..254fe92 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -22,7 +22,31 @@
#include <asm/mach/arch.h>
#include <mach/u300-regs.h>
-#include <mach/syscon.h>
+
+/*
+ * SYSCON addresses applicable to the core machine.
+ */
+
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR (0x400)
+/* SMCR */
+#define U300_SYSCON_SMCR (0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK (0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR (0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR (0x4f8)
+#define U300_SYSCON_PCR_SERV_IND (0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR (0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003)
/*
* Static I/O mappings that are needed for booting the U300 platforms. The
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
deleted file mode 100644
index 10bdd0b..0000000
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ /dev/null
@@ -1,592 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/syscon.h
- *
- *
- * Copyright (C) 2008-2012 ST-Ericsson AB
- *
- * Author: Rickard Andersson <rickard.andersson at stericsson.com>
- */
-
-#ifndef __MACH_SYSCON_H
-#define __MACH_SYSCON_H
-
-/*
- * All register defines for SYSCON registers that concerns individual
- * block clocks and reset lines are registered here. This is because
- * we don't want any other file to try to fool around with this stuff.
- */
-
-/* APP side SYSCON registers */
-/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
-/* CLK Control Register 16bit (R/W) */
-#define U300_SYSCON_CCR (0x0000)
-#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040)
-#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020)
-#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00)
-/* CLK Status Register 16bit (R/W) */
-#define U300_SYSCON_CSR (0x0004)
-#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002)
-#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001)
-/* Reset lines for SLOW devices 16bit (R/W) */
-#define U300_SYSCON_RSR (0x0014)
-#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200)
-#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100)
-#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080)
-#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040)
-#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020)
-#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010)
-#define U300_SYSCON_RSR_EH_RESET_EN (0x0008)
-#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004)
-#define U300_SYSCON_RSR_UART_RESET_EN (0x0002)
-#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001)
-/* Reset lines for FAST devices 16bit (R/W) */
-#define U300_SYSCON_RFR (0x0018)
-#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080)
-#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040)
-#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020)
-#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010)
-#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008)
-#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004)
-#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002)
-#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001)
-/* Reset lines for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_RRR (0x001c)
-#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000)
-#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000)
-#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000)
-#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800)
-#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100)
-#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080)
-#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040)
-#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020)
-#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010)
-#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008)
-#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004)
-#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002)
-#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001)
-/* Clock enable for SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CESR (0x0020)
-#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200)
-#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100)
-#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080)
-#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040)
-#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010)
-#define U300_SYSCON_CESR_EH_CLK_EN (0x0008)
-#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004)
-#define U300_SYSCON_CESR_UART_CLK_EN (0x0002)
-#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001)
-/* Clock enable for FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CEFR (0x0024)
-#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200)
-#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100)
-#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080)
-#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040)
-#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002)
-#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001)
-/* Clock enable for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CERR (0x0028)
-#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000)
-#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000)
-#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800)
-#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400)
-#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200)
-#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100)
-#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080)
-#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040)
-#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020)
-#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010)
-#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008)
-#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004)
-#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002)
-#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001)
-/* Single block clock enable 16bit (-/W) */
-#define U300_SYSCON_SBCER (0x002c)
-#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009)
-#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008)
-#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007)
-#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006)
-#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004)
-#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003)
-#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002)
-#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001)
-#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000)
-#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019)
-#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018)
-#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017)
-#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016)
-#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015)
-#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014)
-#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013)
-#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012)
-#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011)
-#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010)
-#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D)
-#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C)
-#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B)
-#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A)
-#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029)
-#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028)
-#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027)
-#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026)
-#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025)
-#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024)
-#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023)
-#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022)
-#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021)
-#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020)
-/* Single block clock disable 16bit (-/W) */
-#define U300_SYSCON_SBCDR (0x0030)
-/* Same values as above for SBCER */
-/* Clock force SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CFSR (0x003c)
-#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200)
-#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100)
-#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080)
-#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020)
-#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010)
-#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008)
-#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004)
-#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002)
-#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001)
-/* Clock force FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CFFR (0x40)
-/* Values not defined. Define if you want to use them. */
-/* Clock force the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CFRR (0x44)
-#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000)
-#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000)
-#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800)
-#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400)
-#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200)
-#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100)
-#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080)
-#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040)
-#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020)
-#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010)
-#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008)
-#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004)
-#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002)
-#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001)
-/* PLL208 Frequency Control 16bit (R/W) */
-#define U300_SYSCON_PFCR (0x48)
-#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F)
-/* Power Management Control 16bit (R/W) */
-#define U300_SYSCON_PMCR (0x50)
-#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002)
-#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001)
-/*
- * All other clocking registers moved to clock.c!
- */
-/* Reset Out 16bit (R/W) */
-#define U300_SYSCON_RCR (0x6c)
-#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001)
-/* EMIF Slew Rate Control 16bit (R/W) */
-#define U300_SYSCON_SRCLR (0x70)
-#define U300_SYSCON_SRCLR_MASK (0x03FF)
-#define U300_SYSCON_SRCLR_VALUE (0x03FF)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001)
-/* EMIF Clock Control Register 16bit (R/W) */
-#define U300_SYSCON_ECCR (0x0078)
-#define U300_SYSCON_ECCR_MASK (0x000F)
-#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008)
-#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004)
-#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002)
-#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001)
-/* Step one for killing the applications system 16bit (-/W) */
-#define U300_SYSCON_KA1R (0x0080)
-#define U300_SYSCON_KA1R_MASK (0xFFFF)
-#define U300_SYSCON_KA1R_VALUE (0xFFFF)
-/* Step two for killing the application system 16bit (-/W) */
-#define U300_SYSCON_KA2R (0x0084)
-#define U300_SYSCON_KA2R_MASK (0xFFFF)
-#define U300_SYSCON_KA2R_VALUE (0xFFFF)
-/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
-#define U300_SYSCON_MMF0R (0x90)
-#define U300_SYSCON_MMF0R_MASK (0x00FF)
-#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0)
-#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F)
-/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
-#define U300_SYSCON_MMF1R (0x94)
-#define U300_SYSCON_MMF1R_MASK (0x00FF)
-#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0)
-#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F)
-/* AAIF control register 16 bit (R/W) */
-#define U300_SYSCON_AAIFCR (0x98)
-#define U300_SYSCON_AAIFCR_MASK (0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK (0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL (0x0000)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING (0x0001)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT (0x0002)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT (0x0003)
-/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
-#define U300_SYSCON_MMCR (0x9C)
-#define U300_SYSCON_MMCR_MASK (0x0003)
-#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002)
-#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001)
-/* Pull up/down control (R/W) */
-#define U300_SYSCON_PUCR (0x104)
-#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200)
-#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100)
-#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080)
-#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040)
-#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F)
-/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
-#define U300_SYSCON_S0CCR (0x120)
-#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF)
-#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000)
-#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000)
-#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200)
-#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0)
-#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E)
-#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1)
-/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
-#define U300_SYSCON_S1CCR (0x124)
-#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF)
-#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000)
-#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000)
-#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200)
-#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0)
-#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E)
-#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1)
-/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
-#define U300_SYSCON_S2CCR (0x128)
-#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF)
-#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000)
-#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200)
-#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0)
-#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E)
-#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1)
-/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
-#define U300_SYSCON_MCR (0x12c)
-#define U300_SYSCON_MCR_FIELD_MASK (0x00FF)
-#define U300_SYSCON_MCR_PMGEN_CR_4_MASK (0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO (0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_4_SPI (0x0040)
-#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF (0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_2_MASK (0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO (0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC (0x0010)
-#define U300_SYSCON_MCR_PMGEN_CR_2_DSP (0x0020)
-#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF (0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_0_MASK (0x000C)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1 (0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2 (0x0004)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3 (0x0008)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C)
-#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002)
-#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001)
-/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
-#define U300_SYSCON_PICR (0x0130)
-#define U300_SYSCON_PICR_MASK (0x00FF)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001)
-/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
-#define U300_SYSCON_PISR (0x0134)
-#define U300_SYSCON_PISR_MASK (0x000F)
-#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008)
-#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004)
-#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002)
-#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001)
-/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
-#define U300_SYSCON_PICLR (0x0138)
-#define U300_SYSCON_PICLR_MASK (0x000F)
-#define U300_SYSCON_PICLR_RWMASK (0x0000)
-#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008)
-#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004)
-#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002)
-#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001)
-/* CAMIF_CONTROL 16 bit (-/W) */
-#define U300_SYSCON_CICR (0x013C)
-#define U300_SYSCON_CICR_MASK (0x0FFF)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003)
-/* Clock activity observability register 0 */
-#define U300_SYSCON_C0OAR (0x140)
-#define U300_SYSCON_C0OAR_MASK (0xFFFF)
-#define U300_SYSCON_C0OAR_VALUE (0xFFFF)
-#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000)
-#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000)
-#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000)
-#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000)
-#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800)
-#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400)
-#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200)
-#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100)
-#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080)
-#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040)
-#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020)
-#define U300_SYSCON_C0OAR_APEX_CLK (0x0010)
-#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008)
-#define U300_SYSCON_C0OAR_AHB_CLK (0x0004)
-#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002)
-#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001)
-/* Clock activity observability register 1 */
-#define U300_SYSCON_C1OAR (0x144)
-#define U300_SYSCON_C1OAR_MASK (0x3FFE)
-#define U300_SYSCON_C1OAR_VALUE (0x3FFE)
-#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000)
-#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000)
-#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800)
-#define U300_SYSCON_C1OAR_MMC_CLK (0x0400)
-#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200)
-#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100)
-#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080)
-#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040)
-#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020)
-#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010)
-#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008)
-#define U300_SYSCON_C1OAR_PPM_CLK (0x0004)
-#define U300_SYSCON_C1OAR_DMA_CLK (0x0002)
-/* Clock activity observability register 2 */
-#define U300_SYSCON_C2OAR (0x148)
-#define U300_SYSCON_C2OAR_MASK (0x0FFF)
-#define U300_SYSCON_C2OAR_VALUE (0x0FFF)
-#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800)
-#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400)
-#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200)
-#define U300_SYSCON_C2OAR_VC_CLK (0x0100)
-#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080)
-#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040)
-#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020)
-#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001)
-
-/* Chip ID register 16bit (R/-) */
-#define U300_SYSCON_CIDR (0x400)
-/* Video IRQ clear 16bit (R/W) */
-#define U300_SYSCON_VICR (0x404)
-#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE (0x0002)
-#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE (0x0001)
-/* SMCR */
-#define U300_SYSCON_SMCR (0x4d0)
-#define U300_SYSCON_SMCR_FIELD_MASK (0x000e)
-#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008)
-#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004)
-#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002)
-/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
-#define U300_SYSCON_CSDR (0x4f0)
-#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001)
-/* PRINT_CONTROL Print Control 16bit (R/-) */
-#define U300_SYSCON_PCR (0x4f8)
-#define U300_SYSCON_PCR_SERV_IND (0x0001)
-/* BOOT_CONTROL 16bit (R/-) */
-#define U300_SYSCON_BCR (0x4fc)
-#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400)
-#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200)
-#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC)
-#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003)
-
-
-/* CPU clock defines */
-/**
- * CPU high frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_HIGH 208
-/**
- * CPU medium frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_MEDIUM 52
-/**
- * CPU low frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_LOW 13
-
-/* EMIF clock defines */
-/**
- * EMIF high frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_HIGH 104
-/**
- * EMIF medium frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_MEDIUM 52
-/**
- * EMIF low frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_LOW 13
-
-/* AHB clock defines */
-/**
- * AHB high frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_HIGH 52
-/**
- * AHB medium frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_MEDIUM 26
-/**
- * AHB low frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_LOW 7 /* i.e 13/2=6.5MHz */
-
-enum syscon_busmaster {
- SYSCON_BM_DMAC,
- SYSCON_BM_XGAM,
- SYSCON_BM_VIDEO_ENC
-};
-
-/* Selectr a resistor or a set of resistors */
-enum syscon_pull_up_down {
- SYSCON_PU_KEY_IN_EN,
- SYSCON_PU_EMIF_1_8_BIT_EN,
- SYSCON_PU_EMIF_1_16_BIT_EN,
- SYSCON_PU_EMIF_1_NFIF_READY_EN,
- SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
-};
-
-/*
- * Note that this array must match the order of the array "clk_reg"
- * in syscon.c
- */
-enum syscon_clk {
- SYSCON_CLKCONTROL_SLOW_BRIDGE,
- SYSCON_CLKCONTROL_UART,
- SYSCON_CLKCONTROL_BTR,
- SYSCON_CLKCONTROL_EH,
- SYSCON_CLKCONTROL_GPIO,
- SYSCON_CLKCONTROL_KEYPAD,
- SYSCON_CLKCONTROL_APP_TIMER,
- SYSCON_CLKCONTROL_ACC_TIMER,
- SYSCON_CLKCONTROL_FAST_BRIDGE,
- SYSCON_CLKCONTROL_I2C0,
- SYSCON_CLKCONTROL_I2C1,
- SYSCON_CLKCONTROL_I2S0,
- SYSCON_CLKCONTROL_I2S1,
- SYSCON_CLKCONTROL_MMC,
- SYSCON_CLKCONTROL_SPI,
- SYSCON_CLKCONTROL_I2S0_CORE,
- SYSCON_CLKCONTROL_I2S1_CORE,
- SYSCON_CLKCONTROL_UART1,
- SYSCON_CLKCONTROL_AAIF,
- SYSCON_CLKCONTROL_AHB,
- SYSCON_CLKCONTROL_APEX,
- SYSCON_CLKCONTROL_CPU,
- SYSCON_CLKCONTROL_DMA,
- SYSCON_CLKCONTROL_EMIF,
- SYSCON_CLKCONTROL_NAND_IF,
- SYSCON_CLKCONTROL_VIDEO_ENC,
- SYSCON_CLKCONTROL_XGAM,
- SYSCON_CLKCONTROL_SEMI,
- SYSCON_CLKCONTROL_AHB_SUBSYS,
- SYSCON_CLKCONTROL_MSPRO
-};
-
-enum syscon_sysclk_mode {
- SYSCON_SYSCLK_DISABLED,
- SYSCON_SYSCLK_M_CLK,
- SYSCON_SYSCLK_ACC_FSM,
- SYSCON_SYSCLK_PLL60_48,
- SYSCON_SYSCLK_PLL60_60,
- SYSCON_SYSCLK_ACC_PLL208,
- SYSCON_SYSCLK_APP_PLL13,
- SYSCON_SYSCLK_APP_FSM,
- SYSCON_SYSCLK_RTC,
- SYSCON_SYSCLK_APP_PLL208
-};
-
-enum syscon_sysclk_req {
- SYSCON_SYSCLKREQ_DISABLED,
- SYSCON_SYSCLKREQ_ACTIVE_LOW,
- SYSCON_SYSCLKREQ_MONITOR
-};
-
-enum syscon_clk_mode {
- SYSCON_CLKMODE_OFF,
- SYSCON_CLKMODE_DEFAULT,
- SYSCON_CLKMODE_LOW,
- SYSCON_CLKMODE_MEDIUM,
- SYSCON_CLKMODE_HIGH,
- SYSCON_CLKMODE_PERMANENT,
- SYSCON_CLKMODE_ON,
-};
-
-enum syscon_call_mode {
- SYSCON_CLKCALL_NOWAIT,
- SYSCON_CLKCALL_WAIT,
-};
-
-int syscon_dc_on(bool keep_power_on);
-int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
- bool active);
-bool syscon_get_busmaster_active_state(void);
-int syscon_set_sleep_mask(enum syscon_clk,
- bool sleep_ctrl);
-int syscon_config_sysclk(u32 sysclk,
- enum syscon_sysclk_mode sysclkmode,
- bool inverse,
- u32 divisor,
- enum syscon_sysclk_req sysclkreq);
-bool syscon_can_turn_off_semi_clock(void);
-
-/* This function is restricted to core.c */
-int syscon_request_normal_power(bool req);
-
-/* This function is restricted to be used by platform_speed.c */
-int syscon_speed_request(enum syscon_call_mode wait_mode,
- enum syscon_clk_mode req_clk_mode);
-#endif /* __MACH_SYSCON_H */
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index bbda954..ab7d7a5 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -17,9 +17,12 @@
#include <linux/regulator/consumer.h>
/* Those are just for writing in syscon */
#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/syscon.h>
+#include <mach/u300-regs.h>
+
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR (0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001)
/*
* Regulators that power the board and chip and which are
diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
index a15f792..a41e42e 100644
--- a/drivers/clk/clk-u300.c
+++ b/drivers/clk/clk-u300.c
@@ -11,7 +11,348 @@
#include <linux/io.h>
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
-#include <mach/syscon.h>
+
+/* APP side SYSCON registers */
+/* CLK Control Register 16bit (R/W) */
+#define U300_SYSCON_CCR (0x0000)
+#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040)
+#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020)
+#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00)
+/* CLK Status Register 16bit (R/W) */
+#define U300_SYSCON_CSR (0x0004)
+#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002)
+#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001)
+/* Reset lines for SLOW devices 16bit (R/W) */
+#define U300_SYSCON_RSR (0x0014)
+#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200)
+#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100)
+#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080)
+#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040)
+#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020)
+#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010)
+#define U300_SYSCON_RSR_EH_RESET_EN (0x0008)
+#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004)
+#define U300_SYSCON_RSR_UART_RESET_EN (0x0002)
+#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001)
+/* Reset lines for FAST devices 16bit (R/W) */
+#define U300_SYSCON_RFR (0x0018)
+#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080)
+#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040)
+#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020)
+#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010)
+#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008)
+#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004)
+#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002)
+#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001)
+/* Reset lines for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_RRR (0x001c)
+#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000)
+#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000)
+#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000)
+#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800)
+#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100)
+#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080)
+#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040)
+#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020)
+#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010)
+#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008)
+#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004)
+#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002)
+#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001)
+/* Clock enable for SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CESR (0x0020)
+#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200)
+#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100)
+#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080)
+#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040)
+#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010)
+#define U300_SYSCON_CESR_EH_CLK_EN (0x0008)
+#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004)
+#define U300_SYSCON_CESR_UART_CLK_EN (0x0002)
+#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001)
+/* Clock enable for FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CEFR (0x0024)
+#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200)
+#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100)
+#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080)
+#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040)
+#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002)
+#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001)
+/* Clock enable for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CERR (0x0028)
+#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000)
+#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000)
+#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800)
+#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400)
+#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200)
+#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100)
+#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080)
+#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040)
+#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020)
+#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010)
+#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008)
+#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004)
+#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002)
+#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001)
+/* Single block clock enable 16bit (-/W) */
+#define U300_SYSCON_SBCER (0x002c)
+#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009)
+#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008)
+#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007)
+#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006)
+#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004)
+#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003)
+#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002)
+#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001)
+#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000)
+#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019)
+#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018)
+#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017)
+#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016)
+#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015)
+#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014)
+#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013)
+#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012)
+#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011)
+#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010)
+#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D)
+#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C)
+#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B)
+#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A)
+#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029)
+#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028)
+#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027)
+#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026)
+#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025)
+#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024)
+#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023)
+#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022)
+#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021)
+#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020)
+/* Single block clock disable 16bit (-/W) */
+#define U300_SYSCON_SBCDR (0x0030)
+/* Same values as above for SBCER */
+/* Clock force SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CFSR (0x003c)
+#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200)
+#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100)
+#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080)
+#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020)
+#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010)
+#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008)
+#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004)
+#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002)
+#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001)
+/* Clock force FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CFFR (0x40)
+/* Values not defined. Define if you want to use them. */
+/* Clock force the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CFRR (0x44)
+#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000)
+#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000)
+#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800)
+#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400)
+#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200)
+#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100)
+#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080)
+#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040)
+#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020)
+#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010)
+#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008)
+#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004)
+#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002)
+#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001)
+/* PLL208 Frequency Control 16bit (R/W) */
+#define U300_SYSCON_PFCR (0x48)
+#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F)
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR (0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001)
+/* Reset Out 16bit (R/W) */
+#define U300_SYSCON_RCR (0x6c)
+#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001)
+/* EMIF Slew Rate Control 16bit (R/W) */
+#define U300_SYSCON_SRCLR (0x70)
+#define U300_SYSCON_SRCLR_MASK (0x03FF)
+#define U300_SYSCON_SRCLR_VALUE (0x03FF)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001)
+/* EMIF Clock Control Register 16bit (R/W) */
+#define U300_SYSCON_ECCR (0x0078)
+#define U300_SYSCON_ECCR_MASK (0x000F)
+#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008)
+#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004)
+#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002)
+#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001)
+/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
+#define U300_SYSCON_MMF0R (0x90)
+#define U300_SYSCON_MMF0R_MASK (0x00FF)
+#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0)
+#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F)
+/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
+#define U300_SYSCON_MMF1R (0x94)
+#define U300_SYSCON_MMF1R_MASK (0x00FF)
+#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0)
+#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F)
+/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
+#define U300_SYSCON_MMCR (0x9C)
+#define U300_SYSCON_MMCR_MASK (0x0003)
+#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002)
+#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001)
+/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
+#define U300_SYSCON_S0CCR (0x120)
+#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF)
+#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000)
+#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200)
+#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0)
+#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E)
+#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001)
+#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1)
+#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1)
+/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
+#define U300_SYSCON_S1CCR (0x124)
+#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF)
+#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000)
+#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200)
+#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0)
+#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E)
+#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001)
+#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1)
+#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1)
+/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
+#define U300_SYSCON_S2CCR (0x128)
+#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF)
+#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000)
+#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200)
+#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0)
+#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E)
+#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001)
+#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1)
+#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1)
+/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
+#define U300_SYSCON_PICR (0x0130)
+#define U300_SYSCON_PICR_MASK (0x00FF)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001)
+/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
+#define U300_SYSCON_PISR (0x0134)
+#define U300_SYSCON_PISR_MASK (0x000F)
+#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008)
+#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004)
+#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002)
+#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001)
+/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
+#define U300_SYSCON_PICLR (0x0138)
+#define U300_SYSCON_PICLR_MASK (0x000F)
+#define U300_SYSCON_PICLR_RWMASK (0x0000)
+#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008)
+#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004)
+#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002)
+#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001)
+/* Clock activity observability register 0 */
+#define U300_SYSCON_C0OAR (0x140)
+#define U300_SYSCON_C0OAR_MASK (0xFFFF)
+#define U300_SYSCON_C0OAR_VALUE (0xFFFF)
+#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000)
+#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000)
+#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000)
+#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000)
+#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800)
+#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400)
+#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200)
+#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100)
+#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080)
+#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040)
+#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020)
+#define U300_SYSCON_C0OAR_APEX_CLK (0x0010)
+#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008)
+#define U300_SYSCON_C0OAR_AHB_CLK (0x0004)
+#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002)
+#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001)
+/* Clock activity observability register 1 */
+#define U300_SYSCON_C1OAR (0x144)
+#define U300_SYSCON_C1OAR_MASK (0x3FFE)
+#define U300_SYSCON_C1OAR_VALUE (0x3FFE)
+#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000)
+#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000)
+#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800)
+#define U300_SYSCON_C1OAR_MMC_CLK (0x0400)
+#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200)
+#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100)
+#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080)
+#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040)
+#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020)
+#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010)
+#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008)
+#define U300_SYSCON_C1OAR_PPM_CLK (0x0004)
+#define U300_SYSCON_C1OAR_DMA_CLK (0x0002)
+/* Clock activity observability register 2 */
+#define U300_SYSCON_C2OAR (0x148)
+#define U300_SYSCON_C2OAR_MASK (0x0FFF)
+#define U300_SYSCON_C2OAR_VALUE (0x0FFF)
+#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800)
+#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400)
+#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200)
+#define U300_SYSCON_C2OAR_VC_CLK (0x0100)
+#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080)
+#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040)
+#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020)
+#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001)
+
/*
* The clocking hierarchy currently looks like this.
--
1.7.11.3
More information about the linux-arm-kernel
mailing list