[PATCHv3 5/6] ARM: cubieboard: Enable ethernet (EMAC) support in dts

[Maxime Ripard]

From: Stefan Roese <sr at denx.de>

Signed-off-by: Stefan Roese <sr at denx.de>
---
 arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index b70fe0d..32d9b18 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -27,6 +27,21 @@
 	};
 
 	soc at 01c20000 {
+		emac: ethernet at 01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy0>;
+			status = "okay";
+		};
+
+		mdio at 01c0b080 {
+			status = "okay";
+
+			phy0: ethernet-phy at 0 {
+				reg = <0>;
+			};
+		};
+
 		pinctrl at 01c20800 {
 			led_pins_cubieboard: led_pins at 0 {
 				allwinner,pins = "PH20", "PH21";
-- 
1.8.1.2