[PATCH v3 16/20] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree

[Laurent Pinchart]

Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts   | 51 ++++++++++++++++++++++++++
 arch/arm/mach-shmobile/board-kzm9g-reference.c | 40 --------------------
 2 files changed, 51 insertions(+), 40 deletions(-)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index b6f759e..475535f 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -145,19 +145,70 @@
 	};
 };
 
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+};
+
 &mmcif {
+	pinctrl-0 = <&mmcif_pins>;
+	pinctrl-names = "default";
+
 	bus-width = <8>;
 	vmmc-supply = <&reg_1p8v>;
 	status = "okay";
 };
 
+&pfc {
+	pinctrl-0 = <&scifa4_pins>;
+	pinctrl-names = "default";
+
+	i2c3_pins: i2c3 {
+		renesas,groups = "i2c3_1";
+		renesas,function = "i2c3";
+	};
+
+	mmcif_pins: mmcif {
+		mux {
+			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+			renesas,function = "mmc0";
+		};
+		cfg {
+			renesas,groups = "mmc0_data8_0";
+			renesas,pins = "PORT279";
+			renesas,pull-up = <1>;
+		};
+	};
+
+	scifa4_pins: scifa4 {
+		renesas,groups = "scifa4_data", "scifa4_ctrl";
+		renesas,function = "scifa4";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sdhi2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+};
+
 &sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
 	vmmc-supply = <&reg_3p3v>;
 	bus-width = <4>;
 	status = "okay";
 };
 
 &sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
 	vmmc-supply = <&reg_3p3v>;
 	bus-width = <4>;
 	broken-cd;
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 6ff6ca2..fc2bb37 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -27,55 +27,15 @@
 #include <linux/irqchip.h>
 #include <linux/input.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
-	PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "e6050000.pfc",
-				  "i2c3_1", "i2c3"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA4 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
-				  "scifa4_data", "scifa4"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
-				  "scifa4_ctrl", "scifa4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
-				  "sdhi2_data4", "sdhi2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
-				  "sdhi2_ctrl", "sdhi2"),
-};
-
 static void __init kzm_init(void)
 {
 	sh73a0_add_standard_devices_dt();
-	pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
 
 	/* enable SD */
 	gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-- 
1.8.1.5