[PATCH] Move PCIe node to correct place
Jay Agarwal
jagarwal at nvidia.com
Wed May 15 09:55:50 EDT 2013
Moving PCIe controller node to correct place so
that it is sorted by register address in .dtsi file
Signed-off-by: Jay Agarwal <jagarwal at nvidia.com>
---
This patch is based on remotes/gitorious_thierryreding_linux/tegra/next
and should be applied on top of this.
arch/arm/boot/dts/tegra30.dtsi | 132 ++++++++++++++++++++--------------------
1 files changed, 66 insertions(+), 66 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 5c1f7c0..a242b2e 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -12,6 +12,72 @@
serial4 = &uarte;
};
+ pcie-controller {
+ compatible = "nvidia,tegra30-pcie";
+ device_type = "pci";
+ reg = <0x00003000 0x00000800 /* PADS registers */
+ 0x00003800 0x00000200 /* AFI registers */
+ 0x10000000 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <0 98 0x04 /* controller interrupt */
+ 0 99 0x04>; /* MSI interrupt */
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */
+ 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */
+ 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */
+ 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x20000000 0x20000000 0 0x10000000 /* non-prefetchable memory */
+ 0xc2000000 0 0x30000000 0x30000000 0 0x10000000>; /* prefetchable memory */
+
+ clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>,
+ <&tegra_car 118>, <&tegra_car 215>;
+ clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
+ status = "disabled";
+
+ pci at 1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci at 2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci at 3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+ reg = <0x001800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+ };
+
host1x {
compatible = "nvidia,tegra30-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
@@ -115,72 +181,6 @@
};
};
- pcie-controller {
- compatible = "nvidia,tegra30-pcie";
- device_type = "pci";
- reg = <0x00003000 0x00000800 /* PADS registers */
- 0x00003800 0x00000200 /* AFI registers */
- 0x10000000 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <0 98 0x04 /* controller interrupt */
- 0 99 0x04>; /* MSI interrupt */
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */
- 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */
- 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */
- 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x20000000 0x20000000 0 0x10000000 /* non-prefetchable memory */
- 0xc2000000 0 0x30000000 0x30000000 0 0x10000000>; /* prefetchable memory */
-
- clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>,
- <&tegra_car 118>, <&tegra_car 215>;
- clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
- status = "disabled";
-
- pci at 1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci at 2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci at 3,0 {
- device_type = "pci";
- assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
- reg = <0x001800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
- };
-
timer at 50004600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
--
1.7.0.4
More information about the linux-arm-kernel
mailing list