[PATCH 2/2] clk: si5351: Powerdown output when clock rate is 0.

[Marek Belisko]

When rate is 0 powerdown clock output.

Signed-off-by: Marek Belisko <marek.belisko at streamunlimited.com>
---
 drivers/clk/clk-si5351.c |   32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index a8fc0f4..e254e76 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -1042,20 +1042,22 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct si5351_hw_data *hwdata =
 		container_of(hw, struct si5351_hw_data, hw);
 	unsigned long new_rate, new_err, err;
-	unsigned char rdiv;
+	unsigned char rdiv, pdn = 0;
 
 	/* round to closed rdiv */
 	rdiv = SI5351_OUTPUT_CLK_DIV_1;
-	new_rate = parent_rate;
-	err = abs(new_rate - rate);
-	do {
-		new_rate >>= 1;
-		new_err = abs(new_rate - rate);
-		if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128)
-			break;
-		rdiv++;
-		err = new_err;
-	} while (1);
+	if (rate) {
+		new_rate = parent_rate;
+		err = abs(new_rate - rate);
+		do {
+			new_rate >>= 1;
+			new_err = abs(new_rate - rate);
+			if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128)
+				break;
+			rdiv++;
+			err = new_err;
+		} while (1);
+	}
 
 	/* write output divider */
 	switch (hwdata->num) {
@@ -1075,9 +1077,13 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 				rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT);
 	}
 
-	/* powerup clkout */
+	/* when rate is 0 powerdown output */
+	if (rate == 0)
+		pdn = SI5351_CLK_POWERDOWN;
+
+	/* powerup/down clkout */
 	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
-			SI5351_CLK_POWERDOWN, 0);
+			SI5351_CLK_POWERDOWN, pdn);
 
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
-- 
1.7.9.5