[PATCH v2 0/3] clk: implement remuxing during set_rate

[James Hogan]

Hi Mike,

On 14/05/13 17:59, Mike Turquette wrote:
> Quoting James Hogan (2013-05-13 14:30:46)
>> On 13 May 2013 20:57, Mike Turquette <mturquette at linaro.org> wrote:
>>> One reason for this is the difficulty some have had with setting flags
>>> from DT bindings.
>>
>> Could you elaborate on this? I've been adding flags to DT bindings for
>> this sort of thing, but it feels a bit like it's in that grey area of
>> not really describing the hardware itself. This information needs to
>> be specified somehow though.
>>
> 
> It depends on the flag.  A good example is the CLK_DIVIDER_ONE_BASED
> flag which does describe the hardware.  It informs the binding that
> indexing starts at 1, not 0, which is a valid part of the hardware
> description.
> 
> However flags that deal with software policy do not belong on DT.
> CLK_SET_RATE_PARENT certainly does not belong in the DT binding since
> this is a pure Linux-ism.  Every binding just needs to be reviewed on a
> case-by-case basis to make sure the flags are related only to the
> hardware.

So given the desire to eliminate platform code, is there a particular
way that these other flags can be specified instead of DT bindings?

Cheers
James