[PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS

[Dan Murphy]

On 05/17/2013 11:17 AM, Dan Murphy wrote:
> On 05/17/2013 11:15 AM, Nishanth Menon wrote:
>> On 11:02-20130517, Dan Murphy wrote:
>>> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
>>> are different.
>>>
>>> A1-A3 = gpio_wk7
>>> ES = gpio_110
>>>
>>> There is no change to LED D2
>>>
>>> Abstract away the pinmux and the LED definitions for the two boards into
>>> the respective DTS files.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy at ti.com>
>>> ---
>>> Changes in this version:
>>> 	- review comments incorporated.
>>> Previous version of this patch was discussed in:
>>> 	https://patchwork.kernel.org/patch/2582771/
>> one minor nit,
>> $subject could do with space after the ':'
>> otherwise, it looks fine to me. Will suggest waiting for further
>> reviewers if they have an opinion prior to a new rev.
> Thanks NM I will queue up this change locally and await further review prior to sending v7.
>
>>>  arch/arm/boot/dts/omap4-panda-common.dtsi |   16 +++++++++++++++-
>>>  arch/arm/boot/dts/omap4-panda-es.dts      |   28 ++++++++++++++++++++++++++++
>>>  2 files changed, 43 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
>>> index 03bd60d..5fd59b3 100644
>>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
>>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
>>> @@ -16,8 +16,13 @@
>>>  		reg = <0x80000000 0x40000000>; /* 1 GB */
>>>  	};
>>>  
>>> -	leds {
>>> +	leds: leds {
>>>  		compatible = "gpio-leds";
>>> +		pinctrl-names = "default";
>>> +		pinctrl-0 = <
>>> +			&led_wkgpio_pins
>>> +		>;
>>> +
>>>  		heartbeat {
>>>  			label = "pandaboard::status1";
>>>  			gpios = <&gpio1 7 0>;
>>> @@ -137,6 +142,15 @@
>>>  	};
>>>  };
>>>  
>>> +&omap4_pmx_wkup {
>>> +	led_wkgpio_pins: pinmux_leds_wkpins {
>>> +		pinctrl-single,pins = <
>>> +			0x1a 0x3	/* gpio_wk7 OUTPUT | MODE 3 */
>>> +			0x1c 0x3	/* gpio_wk8 OUTPUT | MODE 3 */
>>> +		>;
>>> +	};
>>> +};
>>> +
>>>  &i2c1 {
>>>  	pinctrl-names = "default";
>>>  	pinctrl-0 = <&i2c1_pins>;
>>> diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
>>> index f1d8c21..c968a3b 100644
>>> --- a/arch/arm/boot/dts/omap4-panda-es.dts
>>> +++ b/arch/arm/boot/dts/omap4-panda-es.dts
>>> @@ -34,3 +34,31 @@
>>>  		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>>>  		>;
>>>  };
>>> +
>>> +&omap4_pmx_core {
>>> +	led_gpio_pins: gpio_led_pmx {
>>> +		pinctrl-single,pins = <
>>> +			0xb6 0x3	/* gpio_110 OUTPUT | MODE 3 */
>>> +		>;
>>> +	};
>>> +};
>>> +
>>> +&led_wkgpio_pins {
>>> +	pinctrl-single,pins = <
>>> +		0x1c 0x3	/* gpio_wk8 OUTPUT | MODE 3 */
>>> +	>;
>>> +};
>>> +
>>> +&leds {
>>> +	pinctrl-0 = <
>>> +		&led_gpio_pins
>>> +		&led_wkgpio_pins
>>> +	>;
>>> +
>>> +	heartbeat {
>>> +		gpios = <&gpio4 14 0>;
>>> +	};
>>> +	mmc {
>>> +		gpios = <&gpio1 8 0>;
>>> +	};
>>> +};
>
Any additional comments besides the headline?

If not I will post v7

-- 
------------------
Dan Murphy