[PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line

[Nishanth Menon]

On 12:28-20130524, Kevin Hilman wrote:
> Earlier commits ensured proper muxing of pins related to proper
> TWL6030 behavior: see commit 265a2bc8 (ARM: OMAP3: TWL4030: ensure
> sys_nirq1 is mux'd and wakeup enabled) and commit 1ef43369 (ARM:
> OMAP4: TWL: mux sys_drm_msecure as output for PMIC).
> 
> However these only fixed legacy boot and not DT boot.  For DT boot,
> the default mux values need to be set properly in DT.
> 
> Cc: Tony Lindgren <tony at atomide.com>
> Signed-off-by: Kevin Hilman <khilman at linaro.org>
> ---
> Applies on v3.10-rc2
> 
>  arch/arm/boot/dts/omap4-panda-common.dtsi | 8 ++++++++
>  arch/arm/boot/dts/omap4-sdp.dts           | 8 ++++++++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
> index 03bd60d..a7a9bc0 100644
> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
> @@ -59,6 +59,7 @@
>  &omap4_pmx_core {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <
> +			&twl6030_pins
>  			&twl6040_pins
>  			&mcpdm_pins
>  			&mcbsp1_pins
> @@ -66,6 +67,13 @@
>  			&tpd12s015_pins
>  	>;
>  
> +	twl6030_pins: pinmux_twl6030_pins {
> +		pinctrl-single,pins = <
> +			0x15e 0x4118	/* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
I can understand this - IRQ request comes here.
verified on OMAP4460 Panda-ES.
# omapconf read 0x4A10019C
4118011B

> +			0x14 0x0	/* fref_clk0_out.sys_drm_msecure OUTPUT */
I do not understand this.
OMAP4460 TRM:
Register: CONTROL_WKUP_PAD0_FREF_CLK0_OUT_PAD1_FREF_CLK3_REQ
omapconf read 0x4A31E054
010F010F

I do not understand this configuration. mux modes for 
FREF_CLK0_OUT_MUXMODE:
0x0: Select fref_clk0_out
0x1: Select fref_clk1_req
0x2: Reserved
0x3: Select gpio_wk6
0x5: Select sdmmc2_dat7
0x6: Select hw_dbg6
0x7: Select safe_mode

Why are we setting mode 0(clk out) here?
> +		>;
> +	};
> +
>  	twl6040_pins: pinmux_twl6040_pins {
>  		pinctrl-single,pins = <
>  			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index a35d9cd..5ad0c10 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -145,6 +145,7 @@
>  &omap4_pmx_core {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <
> +			&twl6030_pins
>  			&twl6040_pins
>  			&mcpdm_pins
>  			&dmic_pins
> @@ -179,6 +180,13 @@
>  		>;
>  	};
>  
> +	twl6030_pins: pinmux_twl6030_pins {
> +		pinctrl-single,pins = <
> +			0x15e 0x4118	/* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
> +			0x14 0x0	/* fref_clk0_out.sys_drm_msecure OUTPUT */
> +		>;
> +	};
> +
>  	twl6040_pins: pinmux_twl6040_pins {
>  		pinctrl-single,pins = <
>  			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */
> -- 
> 1.8.2
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Regards,
Nishanth Menon