[PATCh V10 04/12] usb: ehci: ehci-mv: use PHY driver for ehci

[Chao Xie]

Originaly, ehci driver will call the callbacks in platform data
for PHY initialization and shut down.
With PHY driver, it will call the APIs provided by PHY driver
for PHY initialization and shutdown. It removes the callbacks
in platform data, and at same time it removes one block in the
way of enabling device tree for ehci driver.

Signed-off-by: Chao Xie <chao.xie at marvell.com>
---
 drivers/usb/host/ehci-mv.c |   49 +++++++++++++++----------------------------
 1 files changed, 17 insertions(+), 32 deletions(-)

diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 6bad41a..adfc11f 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -15,17 +15,18 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/mv_usb2.h>
 #include <linux/platform_data/mv_usb.h>
 
 #define CAPLENGTH_MASK         (0xff)
 
 struct ehci_hcd_mv {
 	struct usb_hcd *hcd;
+	struct usb_phy *phy;
 
 	/* Which mode does this ehci running OTG/Host ? */
 	int mode;
 
-	void __iomem *phy_regs;
 	void __iomem *cap_regs;
 	void __iomem *op_regs;
 
@@ -48,22 +49,15 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
 
 static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
 {
-	int retval;
-
 	ehci_clock_enable(ehci_mv);
-	if (ehci_mv->pdata->phy_init) {
-		retval = ehci_mv->pdata->phy_init(ehci_mv->phy_regs);
-		if (retval)
-			return retval;
-	}
 
-	return 0;
+	return usb_phy_init(ehci_mv->phy);
 }
 
 static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv)
 {
-	if (ehci_mv->pdata->phy_deinit)
-		ehci_mv->pdata->phy_deinit(ehci_mv->phy_regs);
+	usb_phy_shutdown(ehci_mv->phy);
+
 	ehci_clock_disable(ehci_mv);
 }
 
@@ -169,22 +163,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		goto err_clear_drvdata;
 	}
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
-		retval = -ENODEV;
-		goto err_clear_drvdata;
-	}
-
-	ehci_mv->phy_regs = devm_ioremap(&pdev->dev, r->start,
-					 resource_size(r));
-	if (ehci_mv->phy_regs == 0) {
-		dev_err(&pdev->dev, "failed to map phy I/O memory\n");
-		retval = -EFAULT;
-		goto err_clear_drvdata;
-	}
-
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs");
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!r) {
 		dev_err(&pdev->dev, "no I/O memory resource defined\n");
 		retval = -ENODEV;
@@ -199,6 +178,14 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		goto err_clear_drvdata;
 	}
 
+	ehci_mv->phy = devm_usb_get_phy_dev(&pdev->dev, MV_USB2_PHY_INDEX);
+	if (IS_ERR_OR_NULL(ehci_mv->phy)) {
+		retval = PTR_ERR(ehci_mv->phy);
+		if (retval != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "failed to get the outer phy\n");
+		goto err_clear_drvdata;
+	}
+
 	retval = mv_ehci_enable(ehci_mv);
 	if (retval) {
 		dev_err(&pdev->dev, "init phy error %d\n", retval);
@@ -225,14 +212,15 @@ static int mv_ehci_probe(struct platform_device *pdev)
 
 	ehci_mv->mode = pdata->mode;
 	if (ehci_mv->mode == MV_USB_MODE_OTG) {
-		ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+		ehci_mv->otg = devm_usb_get_phy_dev(&pdev->dev,
+						MV_USB2_OTG_PHY_INDEX);
 		if (IS_ERR(ehci_mv->otg)) {
 			retval = PTR_ERR(ehci_mv->otg);
 
 			if (retval == -ENXIO)
 				dev_info(&pdev->dev, "MV_USB_MODE_OTG "
 						"must have CONFIG_USB_PHY enabled\n");
-			else
+			else if (retval != -EPROBE_DEFER)
 				dev_err(&pdev->dev,
 						"unable to find transceiver\n");
 			goto err_disable_clk;
@@ -259,9 +247,6 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (pdata->private_init)
-		pdata->private_init(ehci_mv->op_regs, ehci_mv->phy_regs);
-
 	dev_info(&pdev->dev,
 		 "successful find EHCI device with regs 0x%p irq %d"
 		 " working in %s mode\n", hcd->regs, hcd->irq,
-- 
1.7.4.1