[RFC PATCH 2/5] ARM: mv78x00: Convert RD-78X00-mASA board to device tree

[Andrew Lunn]

On Sun, May 19, 2013 at 11:39:35PM +0200, Gregory CLEMENT wrote:
> This commit converts the 'RD-78X00-mASA' board to the Device
> Tree. Most of the devices are converted to the Device Tree, the only
> devices which have not their Device Tree bindings are the Gigabit
> Ethernet ones and remain instantiated in the old way.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
> ---
>  arch/arm/mach-mv78xx0/board-dt.c           |  3 +++
>  arch/arm/mach-mv78xx0/common.h             |  7 +++++++
>  arch/arm/mach-mv78xx0/rd78x00-masa-setup.c | 10 ++++++++++
>  3 files changed, 20 insertions(+)
> 
> diff --git a/arch/arm/mach-mv78xx0/board-dt.c b/arch/arm/mach-mv78xx0/board-dt.c
> index 4995fee..5111cbd 100644
> --- a/arch/arm/mach-mv78xx0/board-dt.c
> +++ b/arch/arm/mach-mv78xx0/board-dt.c
> @@ -26,6 +26,9 @@ static void __init mv78x00_dt_init(void)
>  	 */
>  	mv78xx0_init();
>  
> +	if (of_machine_is_compatible("marvell,rd-78x00-masa"))
> +		rd78x00_masa_init_dt();
> +
>  	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
>  }
>  
> diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
> index 5e9485b..6e9140d 100644
> --- a/arch/arm/mach-mv78xx0/common.h
> +++ b/arch/arm/mach-mv78xx0/common.h
> @@ -17,6 +17,13 @@ struct mv_sata_platform_data;
>  /*
>   * Basic MV78xx0 init functions used early by machine-setup.
>   */
> +#ifdef CONFIG_MACH_RD78X00_MASA
> +void rd78x00_masa_init_dt(void);
> +#else
> +static inline void rd78x00_masa_init_dt(void) {};
> +#endif
> +
> +
>  int mv78xx0_core_index(void);
>  void mv78xx0_map_io(void);
>  void mv78xx0_init(void);
> diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
> index d2d06f3..8d88657 100644
> --- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
> +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
> @@ -64,6 +64,16 @@ static void __init rd78x00_masa_init(void)
>  	}
>  }
>  
> +void __init rd78x00_masa_init_dt(void)
> +{
> +	/* Internal devices not ported to DT yet */
> +	mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
> +	mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
> +		mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
> +		mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
> +
> +}

Hi Gregory

First off, the indentation looks wrong. Might be a space/tab issue.

I would also be tempted to place this code into board-dt.c and not
touch or even compile rd78x00-masa-setup.c when using DT. If i
remember correctly, Jason had a patch for Kirkwood which centralized
all the ethernet setup code. You can maybe copy/paste that.

> +
>  static int __init rd78x00_pci_init(void)
>  {
>  	/*
> -- 
> 1.8.1.2
>