[PATCH 0/2] Add Phytec phyFLEX-i.MX6 board

[Christian Hemp]

This patchset adds basic support for Phytec's phyFLEX-i.MX6.

It's based on git repo from Shwan Guo branche imx/dt

Christian Hemp (2):
  ARM: dts: imx6q: Add pinctrl for usdhc2 and enet
  ARM: dts: Phytec phyFLEX-i.MX6 support

 arch/arm/boot/dts/Makefile                 |    1 +
 arch/arm/boot/dts/imx6q-phytec-phyflex.dts |   76 ++++++++++++++++++++++++++++
 arch/arm/boot/dts/imx6q.dtsi               |   33 ++++++++++++
 3 files changed, 110 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-phytec-phyflex.dts

-- 
1.7.9.5