[PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
Lee Jones
lee.jones at linaro.org
Wed May 15 05:51:25 EDT 2013
All configuration left in d40_phy_cfg() is runtime configurable and
there is already a call into it from d40_runtime_config(), so let's
rely on that.
Acked-by: Vinod Koul <vnod.koul at intel.com>
Acked-by: Arnd Bergmann <arnd at arndb.de>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
drivers/dma/ste_dma40.c | 14 +++---
drivers/dma/ste_dma40_ll.c | 101 +++++++++++++++++++++-----------------------
drivers/dma/ste_dma40_ll.h | 3 +-
3 files changed, 58 insertions(+), 60 deletions(-)
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 759293e..b7fe46b 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -2043,6 +2043,14 @@ static int d40_config_memcpy(struct d40_chan *d40c)
} else if (dma_has_cap(DMA_MEMCPY, cap) &&
dma_has_cap(DMA_SLAVE, cap)) {
d40c->dma_cfg = dma40_memcpy_conf_phy;
+
+ /* Generate interrrupt at end of transfer or relink. */
+ d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
+
+ /* Generate interrupt on error. */
+ d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
+ d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
+
} else {
chan_err(d40c, "No memcpy\n");
return -EINVAL;
@@ -2496,9 +2504,6 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
}
pm_runtime_get_sync(d40c->base->dev);
- /* Fill in basic CFG register values */
- d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg,
- &d40c->dst_def_cfg, chan_is_logical(d40c));
d40_set_prio_realtime(d40c);
@@ -2862,8 +2867,7 @@ static int d40_set_runtime_config(struct dma_chan *chan,
if (chan_is_logical(d40c))
d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
else
- d40_phy_cfg(cfg, &d40c->src_def_cfg,
- &d40c->dst_def_cfg, false);
+ d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
/* These settings will take precedence later */
d40c->runtime_addr = config_addr;
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
index 435a223..ab5a2a7 100644
--- a/drivers/dma/ste_dma40_ll.c
+++ b/drivers/dma/ste_dma40_ll.c
@@ -50,63 +50,58 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
}
-/* Sets up SRC and DST CFG register for both logical and physical channels */
-void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
- u32 *src_cfg, u32 *dst_cfg, bool is_log)
+void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
{
u32 src = 0;
u32 dst = 0;
- if (!is_log) {
- /* Physical channel */
- if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
- (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
- /* Set master port to 1 */
- src |= 1 << D40_SREG_CFG_MST_POS;
- src |= D40_TYPE_TO_EVENT(cfg->dev_type);
-
- if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
- src |= 1 << D40_SREG_CFG_PHY_TM_POS;
- else
- src |= 3 << D40_SREG_CFG_PHY_TM_POS;
- }
- if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
- (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
- /* Set master port to 1 */
- dst |= 1 << D40_SREG_CFG_MST_POS;
- dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
-
- if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
- dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
- else
- dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
- }
- /* Interrupt on end of transfer for destination */
- dst |= 1 << D40_SREG_CFG_TIM_POS;
-
- /* Generate interrupt on error */
- src |= 1 << D40_SREG_CFG_EIM_POS;
- dst |= 1 << D40_SREG_CFG_EIM_POS;
-
- /* PSIZE */
- if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
- src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
- src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
- }
- if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
- dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
- dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
- }
-
- /* Element size */
- src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
- dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
-
- /* Set the priority bit to high for the physical channel */
- if (cfg->high_priority) {
- src |= 1 << D40_SREG_CFG_PRI_POS;
- dst |= 1 << D40_SREG_CFG_PRI_POS;
- }
+ if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
+ (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
+ /* Set master port to 1 */
+ src |= 1 << D40_SREG_CFG_MST_POS;
+ src |= D40_TYPE_TO_EVENT(cfg->dev_type);
+
+ if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
+ src |= 1 << D40_SREG_CFG_PHY_TM_POS;
+ else
+ src |= 3 << D40_SREG_CFG_PHY_TM_POS;
+ }
+ if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
+ (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
+ /* Set master port to 1 */
+ dst |= 1 << D40_SREG_CFG_MST_POS;
+ dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
+
+ if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
+ dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
+ else
+ dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
+ }
+ /* Interrupt on end of transfer for destination */
+ dst |= 1 << D40_SREG_CFG_TIM_POS;
+
+ /* Generate interrupt on error */
+ src |= 1 << D40_SREG_CFG_EIM_POS;
+ dst |= 1 << D40_SREG_CFG_EIM_POS;
+
+ /* PSIZE */
+ if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
+ src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
+ src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
+ }
+ if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
+ dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
+ dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
+ }
+
+ /* Element size */
+ src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
+ dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
+
+ /* Set the priority bit to high for the physical channel */
+ if (cfg->high_priority) {
+ src |= 1 << D40_SREG_CFG_PRI_POS;
+ dst |= 1 << D40_SREG_CFG_PRI_POS;
}
if (cfg->src_info.big_endian)
diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
index fdde8ef..1b47312 100644
--- a/drivers/dma/ste_dma40_ll.h
+++ b/drivers/dma/ste_dma40_ll.h
@@ -432,8 +432,7 @@ enum d40_lli_flags {
void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
u32 *src_cfg,
- u32 *dst_cfg,
- bool is_log);
+ u32 *dst_cfg);
void d40_log_cfg(struct stedma40_chan_cfg *cfg,
u32 *lcsp1,
--
1.7.10.4
More information about the linux-arm-kernel
mailing list