[PATCH 1/4] clk: ux500: Pass clock base adresses in initcall for u8540 and u9540

[Philippe Begnic]

From: Philippe Begnic <philippe.begnic at st.com>

Align on u8500 version, pass clock base address in clk_init functions
for u8540 and u9540.

Signed-off-by: Linus Walleij <linus.walleij at stericsson.com>
Signed-off-by: Philippe Begnic <philippe.begnic at st.com>
---
 arch/arm/mach-ux500/cpu.c               |    6 ++++--
 drivers/clk/ux500/u8540_clk.c           |    4 ++--
 drivers/clk/ux500/u9540_clk.c           |    4 ++--
 include/linux/platform_data/clk-ux500.h |    6 ++++--
 4 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index b6145ea..e6fb023 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -76,13 +76,15 @@ void __init ux500_init_irq(void)
 	} else if (cpu_is_u9540()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
-		u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+		u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
 			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
 			       U8500_CLKRST6_BASE);
 	} else if (cpu_is_u8540()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
-		u8540_clk_init();
+		u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
+			       U8500_CLKRST6_BASE);
 	}
 }
 
diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c
index 10adfd2..90f3c88 100644
--- a/drivers/clk/ux500/u8540_clk.c
+++ b/drivers/clk/ux500/u8540_clk.c
@@ -12,10 +12,10 @@
 #include <linux/clk-provider.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/platform_data/clk-ux500.h>
-
 #include "clk.h"
 
-void u8540_clk_init(void)
+void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base)
 {
 	/* register clocks here */
 }
diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c
index dbc0191..4479478 100644
--- a/drivers/clk/ux500/u9540_clk.c
+++ b/drivers/clk/ux500/u9540_clk.c
@@ -12,10 +12,10 @@
 #include <linux/clk-provider.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/platform_data/clk-ux500.h>
-
 #include "clk.h"
 
-void u9540_clk_init(void)
+void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base)
 {
 	/* register clocks here */
 }
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
index 320d9c3..9d98f3a 100644
--- a/include/linux/platform_data/clk-ux500.h
+++ b/include/linux/platform_data/clk-ux500.h
@@ -12,7 +12,9 @@
 
 void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
 		    u32 clkrst5_base, u32 clkrst6_base);
-void u9540_clk_init(void);
-void u8540_clk_init(void);
+void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base);
+void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base);
 
 #endif /* __CLK_UX500_H */
-- 
1.7.9.5