[PATCH] ARM: kirkwood: add button for OpenBlock A6

[Ezequiel Garcia]

Hi Gregory,

On Thu, May 02, 2013 at 09:43:22PM +0200, Gregory CLEMENT wrote:
> The OpenBlocks A6 board has one software-controlled button on the
> front side, labeled "INIT", so we add minimal support for this button
> in the kernel.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
> ---
>  arch/arm/boot/dts/kirkwood-openblocks_a6.dts |   13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
> index d27f724..627d8d0 100644
> --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
> +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
> @@ -209,4 +209,17 @@
>  			gpios = <&gpio1 11 1>;
>  		};
>          };
> +
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +			button at 1 {
> +			label = "Init Button";
> +			linux,code = <116>;
> +			gpios = <&gpio1 6 0>;
> +		};
> +	};
> +
>  };

Shouldn't you add a proper pinctrl entry for this as well?

-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com