[PATCH] ARM: mach-shmobile: r8a7790: add SATA support

[Sergei Shtylyov]

Hello.

On 24-05-2013 6:06, Simon Horman wrote:

> Add SATA clock for r8a7790 SoC (for both device tree and usual cases).

     I don't see where you are adding clock for device tree case.

> Register SATA controller as a "late" platform device on r8a7790 SoC.

     Does R8A7790 have these "early" and "late" lists? I guess not.

> Based on "ARM: mach-shmobile: r8a7779: add SATA support" by
> Vladimir Barinov.

> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
> ---
>   arch/arm/mach-shmobile/clock-r8a7790.c |  4 ++++
>   arch/arm/mach-shmobile/setup-r8a7790.c | 21 +++++++++++++++++++++
>   2 files changed, 25 insertions(+)

> diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
> index b393592..3619a52 100644
> --- a/arch/arm/mach-shmobile/clock-r8a7790.c
> +++ b/arch/arm/mach-shmobile/clock-r8a7790.c
[...]
> @@ -249,6 +252,7 @@ static struct clk_lookup lookups[] = {
>   	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]),
>   	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]),
>   	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
> +	CLKDEV_DEV_ID("sata_rcar.1", &mstp_clks[MSTP814]),
>   };
>
>   #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
> diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
> index ed7ee24..5a2a073 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7790.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7790.c
[...]
> @@ -118,6 +119,25 @@ static inline void r8a7790_register_scif(int idx)
>   				      sizeof(struct plat_sci_port));
>   }
>
> +static __init void r8a7790_register_sata1(void)

    What's with SATA0?

> +{
> +
> +	struct resource res[] = {

    Non-static variable with an intializer? Won't this be a waste of 
code? Wouldn't it be better to have it static __initdata?

> +		DEFINE_RES_MEM_NAMED(0xee300000, 0x200000, "rcar-sata"),

     2 megabytes? Won't it be a waste of memory?

> +		DEFINE_RES_IRQ(gic_iid(106)),
> +	};
> +
> +	struct platform_device_info pdevinfo = {

    Same comment about non-static initialized structure...

> +		.name = "sata_rcar",
> +		.id = 1,
> +		.res = res,
> +		.num_res = ARRAY_SIZE(res),
> +		.dma_mask = DMA_BIT_MASK(32),
> +	};
> +
> +	platform_device_register_full(&pdevinfo);
> +}
> +

WBR, Sergei