[RESEND PATCH 0/5] Add generic set_rate clk_ops for PLL35XX and PLL36XX for samsung SoCs

[Vikas Sajjan]

This patch series does the following: 

 1) Factors out possible common code, unifies the clk strutures used
    for PLL35XX & PLL36XX and usues clk->base instead of clk->con0

 2) Defines a common rate_table which will contain recommended p, m, s and k
    values for supported rates that needs to be changed for changing
    corresponding PLL's rate

 3) Adds set_rate() and round_rate() clk_ops for PLL35XX and PLL36XXX

Is rebased on branch kgene's "for-next"
https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git/log/?h=for-next

And tested these patch on chromebook for EPLL settings for Audio on our chrome tree.

Vikas Sajjan (2):
  clk: samsung: Add set_rate() clk_ops for PLL36XX
  clk: samsung: Add EPLL and VPLL freq table for exynos5250 SoC

Yadwinder Singh Brar (3):
  clk: samsung: Use clk->base instead of directly using clk->con0 for
    PLL3XXX
  clk: samsung: Add support to register rate_table for PLL3XXX
  clk: samsung: Add set_rate() clk_ops for PLL35XX

 drivers/clk/samsung/clk-exynos4.c    |   10 +-
 drivers/clk/samsung/clk-exynos5250.c |   29 +++-
 drivers/clk/samsung/clk-pll.c        |  243 ++++++++++++++++++++++++++++++----
 drivers/clk/samsung/clk-pll.h        |   27 +++-
 4 files changed, 272 insertions(+), 37 deletions(-)

-- 
1.7.9.5