[PATCH] ARM: exynos: Select PINCTRL_EXYNOS for exynos5

[Doug Anderson]

Tomasz / Olof,

On Thu, May 9, 2013 at 2:45 AM, Tomasz Figa <t.figa at samsung.com> wrote:
>> Nothing stops you from doing that on your own. I tend to push back
>> onto the maintainers to get them engaged in their own housekeeping,
>> but anyone is free to :)

I will probably leave this to the maintainers at this point...  ;)

>> Yeah, it should -- this is just in transition since 5440 was first out
>> of the gate with pinctrl.
>
> AFAIK, Exynos5440 contains a completely different pin controller block, which
> is not compatible with pinctrl-samsung driver, so I don't see any point of
> moving it under PINCTRL_EXYNOS, which is currently used for Exynos 4210, 4x12
> and 5250, but will be also extended with driver data for S5PV210 as well.
>
> I'd say that CPU_EXYNOS4210, SOC_EXYNOS4212, SOC_EXYNOS4412 and SOC_EXYNOS5250
> should select PINCTRL_EXYNOS and SOC_EXYNOS5440 should be left as is,
> selecting PINCTRL_EXYNOS5440.

OK, sounds reasonable.  I didn't dig into all of the details of the
5440 pin control driver and don't have a user manual in front of me.
I will do as you say.

New patch coming shortly.

-Doug