[PATCH v4 5/5] ARM: dts: OMAP2+: Use pinctrl constants
Florian Vaussard
florian.vaussard at epfl.ch
Fri May 31 08:32:59 EDT 2013
Using constants for pinctrl allows a better readability, and removes
redundancy with comments.
Signed-off-by: Florian Vaussard <florian.vaussard at epfl.ch>
Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
Reviewed-by: Stephen Warren <swarren at nvidia.com>
---
arch/arm/boot/dts/omap2.dtsi | 1 +
arch/arm/boot/dts/omap3-beagle.dts | 24 ++++----
arch/arm/boot/dts/omap3-igep.dtsi | 34 +++++-----
arch/arm/boot/dts/omap3.dtsi | 1 +
arch/arm/boot/dts/omap4-panda-a4.dts | 6 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 54 ++++++++--------
arch/arm/boot/dts/omap4-panda-es.dts | 6 +-
arch/arm/boot/dts/omap4-sdp-es23plus.dts | 6 +-
arch/arm/boot/dts/omap4-sdp.dts | 98 ++++++++++++++--------------
arch/arm/boot/dts/omap4.dtsi | 1 +
arch/arm/boot/dts/omap5-evm.dts | 88 +++++++++++++-------------
arch/arm/boot/dts/omap5.dtsi | 1 +
12 files changed, 162 insertions(+), 158 deletions(-)
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f39b237..b3cc896 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -9,6 +9,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
#include "skeleton.dtsi"
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 434288f..6d47c4b 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -81,18 +81,18 @@
hsusbb2_pins: pinmux_hsusbb2_pins {
pinctrl-single,pins = <
- 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
- 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
- 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
- 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
- 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
- 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
- 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
- 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
- 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
- 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
- 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
- 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
+ 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */
+ 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */
+ 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */
+ 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */
+ 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */
+ 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */
+ 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */
+ 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */
+ 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */
+ 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */
+ 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */
+ 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index d1d2ba7..5224c29 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -29,43 +29,43 @@
&omap3_pmx_core {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */
- 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */
+ 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */
- 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+ 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */
- 0x170 0 /* uart3_tx.uart3_tx OUTPUT | MODE0 */
+ 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
+ 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 0x0118 /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */
- 0x116 0x0118 /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */
- 0x118 0x0118 /* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */
- 0x11a 0x0118 /* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */
- 0x11c 0x0118 /* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */
- 0x11e 0x0118 /* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */
- 0x120 0x0100 /* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */
- 0x122 0x0100 /* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */
- 0x124 0x0100 /* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */
- 0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */
+ 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+ 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+ 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+ 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
>;
};
smsc911x_pins: pinmux_smsc911x_pins {
pinctrl-single,pins = <
- 0x1a2 0x0104 /* mcspi1_cs2.gpio_176 INPUT | MODE4 */
+ 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index fac923b..6d05ee0 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -9,6 +9,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
#include "skeleton.dtsi"
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
index f18fb5c..133f1b7 100644
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -13,8 +13,8 @@
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
- 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 8d09cf5..d5d144a 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -64,7 +64,7 @@
twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
pinctrl-single,pins = <
- 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
>;
};
};
@@ -82,77 +82,77 @@
twl6030_pins: pinmux_twl6030_pins {
pinctrl-single,pins = <
- 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
>;
};
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
- 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
- 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
- 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
- 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
- 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+ 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
- 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
- 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
- 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+ 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
- 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
- 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
- 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+ 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
- 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
- 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
- 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index c6f012e..5cfdf19 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -29,8 +29,8 @@
/* PandaboardES has external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
- 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
index 4f26355..aad5dda 100644
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -10,8 +10,8 @@
/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
- 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index e9df3ea..7951b4e 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -150,7 +150,7 @@
twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
pinctrl-single,pins = <
- 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
>;
};
};
@@ -170,129 +170,129 @@
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
- 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */
- 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
- 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+ 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ 0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ 0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ 0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
- 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
- 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
- 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ 0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ 0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ 0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
- 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */
- 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */
+ 0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
+ 0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
>;
};
twl6030_pins: pinmux_twl6030_pins {
pinctrl-single,pins = <
- 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
>;
};
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
- 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
- 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
- 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
- 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
- 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+ 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
dmic_pins: pinmux_dmic_pins {
pinctrl-single,pins = <
- 0xd0 0 /* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */
- 0xd2 0x100 /* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */
- 0xd4 0x100 /* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */
- 0xd6 0x100 /* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
+ 0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
+ 0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
+ 0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
- 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
- 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
- 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+ 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
- 0xb6 0x100 /* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */
- 0xb8 0x108 /* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */
- 0xba 0x8 /* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */
- 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
+ 0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+ 0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
+ 0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
+ 0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- 0xf2 0x100 /* mcspi1_clk.mcspi1_clk INPUT | MODE0 */
- 0xf4 0x100 /* mcspi1_somi.mcspi1_somi INPUT | MODE0 */
- 0xf6 0x100 /* mcspi1_simo.mcspi1_simo INPUT | MODE0 */
- 0xf8 0x100 /* mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/
+ 0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ 0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ 0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ 0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
- 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
- 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
- 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+ 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
- 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
- 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
- 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 6137aff..463b97d 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
#include "skeleton.dtsi"
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index f5f55d1..22e9ee8 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -40,106 +40,106 @@
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0x18a 0x6 /* perslimbus2_clock.gpio5_145 OUTPUT | MODE6 */
+ 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0x142 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
- 0x15c 0x108 /* abemcpdm_ul_data.abemcpdm_ul_data INPUT PULLDOWN | MODE0 */
- 0x15e 0x108 /* abemcpdm_dl_data.abemcpdm_dl_data INPUT PULLDOWN | MODE0 */
- 0x160 0x118 /* abemcpdm_frame.abemcpdm_frame INPUT PULLUP | MODE0 */
- 0x162 0x108 /* abemcpdm_lb_clk.abemcpdm_lb_clk INPUT PULLDOWN | MODE0 */
+ 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
+ 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
+ 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
+ 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
>;
};
dmic_pins: pinmux_dmic_pins {
pinctrl-single,pins = <
- 0x144 0x100 /* abedmic_din1.abedmic_din1 INPUT | MODE0 */
- 0x146 0x100 /* abedmic_din2.abedmic_din2 INPUT | MODE0 */
- 0x148 0x100 /* abedmic_din3.abedmic_din3 INPUT | MODE0 */
- 0x14a 0 /* abedmic_clk1.abedmic_clk1 OUTPUT | MODE0 */
+ 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */
+ 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */
+ 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */
+ 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0x14c 0x101 /* abedmic_clk2.abemcbsp1_fsx INPUT | MODE1 */
- 0x14e 0x9 /* abedmic_clk3.abemcbsp1_dx OUTPUT PULLDOWN | MODE1 */
- 0x150 0x101 /* abeslimbus1_clock.abemcbsp1_clkx INPUT | MODE0 */
- 0x152 0x109 /* abeslimbus1_data.abemcbsp1_dr INPUT PULLDOWN | MODE1 */
+ 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
+ 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
+ 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
+ 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
- 0x154 0x108 /* abemcbsp2_dr.abemcbsp2_dr INPUT PULLDOWN | MODE0 */
- 0x156 0x8 /* abemcbsp2_dx.abemcbsp2_dx OUTPUT PULLDOWN | MODE0 */
- 0x158 0x100 /* abemcbsp2_fsx.abemcbsp2_fsx INPUT | MODE0 */
- 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
+ 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
+ 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
+ 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
+ 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
>;
};
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- 0x1b2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
- 0x1b4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
- >;
- };
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x178 0x100 /* i2c2_scl INPUTENABLE | MODE0 */
- 0x17a 0x100 /* i2c2_sda INPUTENABLE | MODE0 */
+ 0x178 (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ 0x17a (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0x13a 0x100 /* i2c3_scl INPUTENABLE | MODE0 */
- 0x13c 0x100 /* i2c3_sda INPUTENABLE | MODE0 */
+ 0x13a (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ 0x13c (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
- 0xb8 0x100 /* i2c4_scl INPUTENABLE | MODE0 */
- 0xba 0x100 /* i2c4_sda INPUTENABLE | MODE0 */
+ 0xb8 (PIN_INPUT | MUX_MODE0) /* i2c4_scl */
+ 0xba (PIN_INPUT | MUX_MODE0) /* i2c4_sda */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x184 0x100 /* i2c5_scl INPUTENABLE | MODE0 */
- 0x186 0x100 /* i2c5_sda INPUTENABLE | MODE0 */
+ 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
>;
};
mcspi2_pins: pinmux_mcspi2_pins {
pinctrl-single,pins = <
- 0xbc 0x100 /* MCSPI2_CLK INPUTENABLE | MODE0 */
- 0xbe 0x100 /* MCSPI2_SIMO INPUTENABLE | MODE0 */
- 0xc0 0x118 /* MCSPI2_SOMI PULLUP | INPUTENABLE | MODE0*/
- 0xc2 0x0 /* MCSPI2_CS MODE0*/
+ 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
+ 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
+ 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
+ 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */
>;
};
mcspi3_pins: pinmux_mcspi3_pins {
pinctrl-single,pins = <
- 0x78 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */
- 0x7a 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */
- 0x7c 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */
- 0x7e 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */
+ 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
+ 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
+ 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
+ 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
>;
};
mcspi4_pins: pinmux_mcspi4_pins {
pinctrl-single,pins = <
- 0x164 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */
- 0x168 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */
- 0x16a 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */
- 0x16c 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */
+ 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
+ 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
+ 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
+ 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
>;
};
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 2b80653..08558c9 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
#include "skeleton.dtsi"
--
1.7.5.4
More information about the linux-arm-kernel
mailing list