[PATCH 2/2] ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output

[Paul Walmsley]

Hi

something that you should fix:

On Tue, 7 May 2013, Vaibhav Hiremath wrote:

> xdma_event_intr1.clkout2 pad can be used to source clock
> from either 32K OSC or any of the PLL (except MPU) outputs.
> On the existing AM335x based boards (EVM, EVM-SK and Bone),
> this pad is used to feed the clock to audio codes.
> 
> So, this patch configures the pinmux to get clkout2 on the pad.
> 
> Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
> ---
>  arch/arm/boot/dts/am335x-bone.dts  |    8 +++++++-
>  arch/arm/boot/dts/am335x-evm.dts   |    8 +++++++-
>  arch/arm/boot/dts/am335x-evmsk.dts |    8 +++++++-
>  3 files changed, 21 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> index bfba6fc..f4630a3 100644
> --- a/arch/arm/boot/dts/am335x-bone.dts
> +++ b/arch/arm/boot/dts/am335x-bone.dts
> @@ -26,7 +26,7 @@
>  
>  	am33xx_pinmux: pinmux at 44e10800 {
>  		pinctrl-names = "default";
> -		pinctrl-0 = <>;
> +		pinctrl-0 = <&clkout2_pin>;
>  
>  		user_leds_s0: user_leds_s0 {
>  			pinctrl-single,pins = <
> @@ -50,6 +50,12 @@
>  				0x174 0x00	/* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>  			>;
>  		};
> +
> +		clkout2_pin: pinumx_clkout2_pin {

"pinmux" is misspelled here and in several other parts of this file.




- Paul