[PATCH v2] can: flexcan: remove HAVE_CAN_FLEXCAN Kconfig symbol

[Marc Kleine-Budde]

This patch removes the Kconfig symbol HAVE_CAN_FLEXCAN from arch/{arm,powerpc}
and allowing compilation unconditionally on all arm and powerpc platforms.

This brings a bigger compile time coverage and removes the following dependency
warning found by Arnd Bergmann:

    warning: (SOC_IMX28 && SOC_IMX25 && SOC_IMX35 && IMX_HAVE_PLATFORM_FLEXCAN &&
        SOC_IMX53 && SOC_IMX6Q) selects HAVE_CAN_FLEXCAN
    which has unmet direct dependencies (NET && CAN && CAN_DEV)

Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Shawn Guo <shawn.guo at linaro.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Kumar Gala <galak at kernel.crashing.org>
Cc: U Bhaskar-B22300 <B22300 at freescale.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linuxppc-dev at lists.ozlabs.org
Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
---
Changes since v1:
- don't remove IMX_HAVE_PLATFORM_FLEXCAN, which breaks non DT imx platforms
  tnx Shawn

 arch/arm/mach-imx/Kconfig         | 4 ----
 arch/arm/mach-imx/devices/Kconfig | 1 -
 arch/arm/mach-mxs/Kconfig         | 1 -
 arch/powerpc/Kconfig              | 1 -
 drivers/net/can/Kconfig           | 5 +----
 5 files changed, 1 insertion(+), 11 deletions(-)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ba44328..af8e109 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -111,7 +111,6 @@ config SOC_IMX25
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
 	select CPU_ARM926T
-	select HAVE_CAN_FLEXCAN if CAN
 	select MXC_AVIC
 
 config SOC_IMX27
@@ -137,7 +136,6 @@ config SOC_IMX35
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
 	select CPU_V6K
-	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_EPIT
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
@@ -776,7 +774,6 @@ comment "Device tree only"
 
 config	SOC_IMX53
 	bool "i.MX53 support"
-	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_IMX_SRC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select PINCTRL
@@ -799,7 +796,6 @@ config SOC_IMX6Q
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if LOCAL_TIMERS
-	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 3dd2b1b..68c74fb 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -4,7 +4,6 @@ config IMX_HAVE_PLATFORM_FEC
 
 config IMX_HAVE_PLATFORM_FLEXCAN
 	bool
-	select HAVE_CAN_FLEXCAN if CAN
 
 config IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	bool
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4dc2fbb..ce6e7d6 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -11,7 +11,6 @@ config SOC_IMX28
 	select ARM_AMBA
 	select ARM_CPU_SUSPEND if PM
 	select CPU_ARM926T
-	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_PWM
 	select PINCTRL_IMX28
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c33e3ad..7754c6b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -674,7 +674,6 @@ config SBUS
 
 config FSL_SOC
 	bool
-	select HAVE_CAN_FLEXCAN if NET && CAN
 
 config FSL_PCI
  	bool
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index e456b70..3c06947 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -102,12 +102,9 @@ config CAN_JANZ_ICAN3
 	  This driver can also be built as a module. If so, the module will be
 	  called janz-ican3.ko.
 
-config HAVE_CAN_FLEXCAN
-	bool
-
 config CAN_FLEXCAN
 	tristate "Support for Freescale FLEXCAN based chips"
-	depends on HAVE_CAN_FLEXCAN
+	depends on ARM || PPC
 	---help---
 	  Say Y here if you want to support for Freescale FlexCAN.
 
-- 
1.8.2.rc2