[PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad

[Hiremath, Vaibhav]

> -----Original Message-----
> From: Hiremath, Vaibhav
> Sent: Tuesday, May 07, 2013 3:10 PM
> To: linux-omap at vger.kernel.org
> Cc: tony at atomide.com; Cousson, Benoit; paul at pwsan.com; linux-arm-
> kernel at lists.infradead.org; Hiremath, Vaibhav
> Subject: [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2
> output on SoC pad
> 
> 'clkout2' comes out on the device pad and is being used by various
> external on-board peripherals like, Audio codecs, Wilink and stuff.
> So enable the clkout2 by default during init sequence itself
> along with right pinmux configuration clkout2 output.
> 
> Also, add the missing entry of "clkout2_ck" to the AM33xx clock table.
> 
> As far as enabling of clkout2 during init is concerned,
> we can argue that it can be handled using DT property and enable
> the clock only when specified; but not until OMAP clock-tree
> migration to DT.
> 
> Vaibhav Hiremath (2):
>   ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init
>   ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
> 
>  arch/arm/boot/dts/am335x-bone.dts     |    8 +++++++-
>  arch/arm/boot/dts/am335x-evm.dts      |    8 +++++++-
>  arch/arm/boot/dts/am335x-evmsk.dts    |    8 +++++++-
>  arch/arm/mach-omap2/cclock33xx_data.c |    2 ++
>  4 files changed, 23 insertions(+), 3 deletions(-)

Tony, Paul and Benoit,

Any update on this series?

Thanks,
Vaibhav