[PATCH] ARM: ux500: Allow Snowball to pass its own regulator settings

[Lee Jones]

This patch fixes a bug introduced in the v3.10 merge window.

Currently the external regulator settings are passed though to the AB8500
regulator driver regards of whether they can or should be used on any
ux500 based platform. They are not applicable for the u8505 and when
enabled, they turn off AUX2 which adversely affects the eMMC on Snowball.

The driver already knows that the external regulator settings are not
appropriate for the u8505, however it's more difficult for driver code to
distinguish between two different u8500 based platforms.

Using the new semantics, we can just not pass the external regulator
initialisation values from platform code and the external regulator
driver will know not to register them.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/mach-ux500/board-mop500-regulators.c |    8 ++++++++
 arch/arm/mach-ux500/board-mop500-regulators.h |    1 +
 arch/arm/mach-ux500/board-mop500.c            |    2 ++
 3 files changed, 11 insertions(+)

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index b34441b..7399e90 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -996,6 +996,14 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
 	.num_ext_regulator      = ARRAY_SIZE(ab8500_ext_regulators),
 };
 
+/* External regulators turn off VAUX2 when in use on Snowball. */
+struct ab8500_regulator_platform_data snowball_regulator_plat_data = {
+	.reg_init               = ab8500_reg_init,
+	.num_reg_init           = ARRAY_SIZE(ab8500_reg_init),
+	.regulator              = ab8500_regulators,
+	.num_regulator          = ARRAY_SIZE(ab8500_regulators),
+};
+
 struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
 	.reg_init               = ab8505_reg_init,
 	.num_reg_init           = ARRAY_SIZE(ab8505_reg_init),
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
index 039f513..6300e79 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -16,6 +16,7 @@
 
 extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
 extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
+extern struct ab8500_regulator_platform_data snowball_regulator_plat_data;
 extern struct regulator_init_data tps61052_regulator;
 extern struct regulator_init_data gpio_en_3v3_regulator;
 extern struct regulator_init_data sdi0_reg_init_data;
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 0b018c4..2d609d4 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -615,6 +615,8 @@ static void __init snowball_init_machine(void)
 	struct device *parent = NULL;
 	int i;
 
+	ab8500_platdata.regulator = &snowball_regulator_plat_data;
+
 	platform_device_register(&db8500_prcmu_device);
 
 	sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO;
-- 
1.7.10.4