November 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Nov 1 01:33:55 EDT 2012
Ending: Fri Nov 30 23:43:19 EST 2012
Messages: 6290

• Kernel uncompression error   Arnaud Patard (Rtp)
• [PATCH 1/2] leds: Add generic support for memory mapped LEDs   Jon Medhurst (Tixy)
• [PATCH 1/2] leds: Add generic support for memory mapped LEDs   Jon Medhurst (Tixy)
• [PATCH] ARM: kprobes: use BUG_ON where possible   Jon Medhurst (Tixy)
• [PATCH 0/5] ARM: Exynos: Enable device tree support for MCT controller   Thomas Abraham
• [PATCH 1/5] ARM: Exynos: add a register base address variable in mct controller driver   Thomas Abraham
• [PATCH 2/5] ARM: Exynos: prepare an array of MCT interrupt numbers and use it   Thomas Abraham
• [PATCH 3/5] ARM: Exynos: add device tree support for MCT controller driver   Thomas Abraham
• [PATCH 4/5] ARM: Exynos: remove static io-remapping of mct registers for Exynos5   Thomas Abraham
• [PATCH 5/5] ARM: dts: add mct device tree node for all supported Exynos SoC's   Thomas Abraham
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Thomas Abraham
• [PATCH v2 1/5] clk: samsung: add common clock framework support for Samsung platforms   Thomas Abraham
• [PATCH v2 1/5] clk: samsung: add common clock framework support for Samsung platforms   Thomas Abraham
• [PATCH v2 1/5] clk: samsung: add common clock framework support for Samsung platforms   Thomas Abraham
• [PATCH 3/5] ARM: Exynos: add device tree support for MCT controller driver   Thomas Abraham
• [PATCH] ARM: Exynos: remove unused init_uarts callback for exynos4x12 platforms   Thomas Abraham
• [PATCH RFC] ARM: EXYNOS5: Setup legacy i2c controller interrupts on SMDK5250   Thomas Abraham
• [PATCH RFC] ARM: EXYNOS5: Setup legacy i2c controller interrupts on SMDK5250   Thomas Abraham
• [PATCH v3 00/11] clk: exynos4: migrate to common clock framework   Thomas Abraham
• [PATCH v3 01/11] clk: samsung: add common clock framework helper functions for Samsung platforms   Thomas Abraham
• [PATCH v3 02/11] clk: samsung: add pll clock registration helper functions   Thomas Abraham
• [PATCH v3 03/11] clk: exynos4: register clocks using common clock framework   Thomas Abraham
• [PATCH v3 04/11] ARM: Exynos4: Migrate clock support to common clock framework   Thomas Abraham
• [PATCH v3 05/11] ARM: dts: add exynos4 clock controller nodes   Thomas Abraham
• [PATCH v3 06/11] ARM: dts: add xxti and xusbxti fixed rate clock nodes for exynos4 based platforms   Thomas Abraham
• [PATCH v3 07/11] ARM: Exynos4: allow legacy board support to specify xxti and xusbxti clock speed   Thomas Abraham
• [PATCH v3 08/11] ARM: dts: add clock provider information for all controllers in Exynos4 SoC   Thomas Abraham
• [PATCH v3 09/11] ARM: Exynos4: remove auxdata table from machine file   Thomas Abraham
• [PATCH v3 10/11] ARM: Exynos: use fin_pll clock as the tick clock source for mct   Thomas Abraham
• [PATCH v3 11/11] ARM: Exynos: add support for mct clock setup   Thomas Abraham
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Thomas Abraham
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Thomas Abraham
• [PATCH v3 01/11] clk: samsung: add common clock framework helper functions for Samsung platforms   Thomas Abraham
• [PATCH v3 03/11] clk: exynos4: register clocks using common clock framework   Thomas Abraham
• [PATCH v3 05/11] ARM: dts: add exynos4 clock controller nodes   Thomas Abraham
• [PATCH v3 04/11] ARM: Exynos4: Migrate clock support to common clock framework   Thomas Abraham
• [PATCH v3 07/11] ARM: Exynos4: allow legacy board support to specify xxti and xusbxti clock speed   Thomas Abraham
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Thomas Abraham
• [PATCH] ARM: Exynos5: Remove i2c0 resource information and setting of device names   Thomas Abraham
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Thomas Abraham
• [PATCH] ARM: dts: add max8997 device node for exynos4210-origen board   Thomas Abraham
• [PATCH] ARM: Exynos5: fix clock initialization for exynos5250   Thomas Abraham
• [PATCH v2 0/5] ARM: Exynos: Enable device tree support for MCT controller   Thomas Abraham
• [PATCH v2 1/5] ARM: Exynos: add a register base address variable in mct controller driver   Thomas Abraham
• [PATCH v2 2/5] ARM: Exynos: prepare an array of MCT interrupt numbers and use it   Thomas Abraham
• [PATCH v2 3/5] ARM: Exynos: add device tree support for MCT controller driver   Thomas Abraham
• [PATCH v2 4/5] ARM: Exynos: remove static io-remapping of mct registers for Exynos5   Thomas Abraham
• [PATCH v2 5/5] ARM: dts: add mct device tree node for all supported Exynos SoC's   Thomas Abraham
• [PATCH v4 00/12] clk: exynos4: migrate to common clock framework   Thomas Abraham
• [PATCH v4 01/12] clk: samsung: add common clock framework helper functions for Samsung platforms   Thomas Abraham
• [PATCH v4 02/12] clk: samsung: add pll clock registration helper functions   Thomas Abraham
• [PATCH v4 03/12] clk: exynos4: register clocks using common clock framework   Thomas Abraham
• [PATCH v4 04/12] ARM: Exynos: Rework timer initialization sequence   Thomas Abraham
• [PATCH v4 05/12] ARM: Exynos4: Migrate clock support to common clock framework   Thomas Abraham
• [PATCH v4 06/12] ARM: dts: add exynos4 clock controller nodes   Thomas Abraham
• [PATCH v4 07/12] ARM: dts: add xxti and xusbxti fixed rate clock nodes for exynos4 based platforms   Thomas Abraham
• [PATCH v4 08/12] ARM: Exynos4: allow legacy board support to specify xxti and xusbxti clock speed   Thomas Abraham
• [PATCH v4 09/12] ARM: dts: add clock provider information for all controllers in Exynos4 SoC   Thomas Abraham
• [PATCH v4 10/12] ARM: Exynos4: remove auxdata table from machine file   Thomas Abraham
• [PATCH v4 11/12] ARM: Exynos: use fin_pll clock as the tick clock source for mct   Thomas Abraham
• [PATCH v4 12/12] ARM: Exynos: add support for mct clock setup   Thomas Abraham
• [PATCH] ARM: Exynos: Remove unused non-dt support for dwmci controller   Thomas Abraham
• [PATCH] ARM: Exynos: Remove unused regs-mem.h file   Thomas Abraham
• DMABUF V4L2 patches got merged   Thomas Abraham
• [RFC 1/2] ARM: S3C24XX: add devicetree support for interrupts   Thomas Abraham
• [RFC 1/2] ARM: S3C24XX: add devicetree support for interrupts   Thomas Abraham
• [PATCH] ARM: Exynos: Remove unused non-dt support for dwmci controller   Thomas Abraham
• [RFC 1/2] ARM: S3C24XX: add devicetree support for interrupts   Thomas Abraham
• [PATCH] ARM: Exynos: Remove unused non-dt support for dwmci controller   Thomas Abraham
• [PATCH v4 00/12] clk: exynos4: migrate to common clock framework   Thomas Abraham
• [PATCH 1/3] i2c: exynos5: add High Speed I2C controller driver   Thomas Abraham
• [RFC 1/2] ARM: S3C24XX: add devicetree support for interrupts   Thomas Abraham
• [PATCH 1/1] ARM: pxa: fix pxa25x gpio wakeup setting   Andrea Adami
• [PATCH] ARM: pxa: pxa25x.c: add dummy SA1100 rtc clock   Andrea Adami
• [PATCH] ARM: pxa: pxa27x.c: add dummy SA1100 rtc clock   Andrea Adami
• [PATCH] ARM: sharpsl_param: Fix hang on boot in sharpsl_save_param().   Andrea Adami
• linux-arm-kernel Digest, Vol 40, Issue 1034   Mayank Agarwal
• Decoding the PTM traces   Punit Agrawal
• Decoding the PTM traces   Punit Agrawal
• [PATCH v4 04/13] ARM: KVM: Initial VGIC MMIO support code   Dong Aisheng
• [PATCH v4 05/13] ARM: KVM: VGIC accept vcpu and dist base addresses from user space   Dong Aisheng
• [PATCH v4 06/13] ARM: KVM: VGIC distributor handling   Dong Aisheng
• [PATCH] Device Tree binding for the 'mv_xor' XOR engine DMA driver   Lior Amsalem
• [PATCH] Device Tree binding for the 'mv_xor' XOR engine DMA driver   Lior Amsalem
• [PATCH v2 1/6] ARM: EXYNOS5: Clock settings for SATA and SATA PHY   Vasanth Ananthan
• [PATCH v2 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Vasanth Ananthan
• [PATCH v2 3/6] DRIVERS: ATA: SATA PHY utility framework   Vasanth Ananthan
• [PATCH v2 4/6] DRIVERS:I2C: I2C driver polling mode support   Vasanth Ananthan
• [PATCH v2 5/6] DRIVERS: ATA: SATA controller driver   Vasanth Ananthan
• [PATCH v2 6/6] DRIVERS: ATA: SATA PHY controller driver   Vasanth Ananthan
• [PATCH 1/2] ARM: dts: exynos: Move the dwmmc aliases from smdk5250 dts to exynos   Doug Anderson
• [PATCH 2/2] ARM: dts: snow: Add board dts file for Snow board (ARM Chromebook)   Doug Anderson
• [PATCH] ARM: exynos: dt: add all i2c busses to auxdata   Doug Anderson
• [PATCH 1/2] ARM: EXYNOS: Add aliases for i2c controller for exynos4   Doug Anderson
• [PATCH 2/2] i2c: s3c2410: Get the i2c bus number from alias id   Doug Anderson
• [PATCH] ARM: exynos: add UART3 to DEBUG_LL ports   Doug Anderson
• [PATCH v2] ARM: exynos: add UART3 to DEBUG_LL ports   Doug Anderson
• [PATCH] ARM: exynos: add UART3 to DEBUG_LL ports   Doug Anderson
• [PATCH 0/2] Add automatic bus number support for i2c busses with device tree   Doug Anderson
• [PATCH 1/2] i2c-core: dt: Pick i2c bus number from i2c alias if present   Doug Anderson
• [PATCH 2/2] i2c: pxa: Use i2c-core to get bus number now   Doug Anderson
• [PATCH 2/2] i2c: s3c2410: Get the i2c bus number from alias id   Doug Anderson
• [PATCH] ARM: EXYNOS: Avoid early use of of_machine_is_compatible()   Doug Anderson
• [PATCH] ARM: EXYNOS: Avoid early use of of_machine_is_compatible()   Doug Anderson
• [PATCH v3 2/4] ARM: dts: Add disable-wp for sd card slot on smdk5250   Doug Anderson
• [PATCH] ARM: DTS: CROS5250: Add max77686 device tree support   Doug Anderson
• [PATCH] Add support for generic BCM SoC chipsets   Domenico Andreoli
• [PATCH v2] Add support for generic BCM SoC chipsets   Domenico Andreoli
• [PATCH v2] Add support for generic BCM SoC chipsets   Domenico Andreoli
• ttySAC0 or ttyS0 in 3.6.x ARM Linux?   Domenico Andreoli
• [PATCH] S3C24XX: Fix console baud rate guessing   Domenico Andreoli
• [RESEND PATCH] S3C24XX: Fix console baud rate guessing   Domenico Andreoli
• [PATCH] arm: mm: lpae: add PTE loop to alloc_init_section   Vitaly Andrianov
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   AnilKumar, Chimata
• [PATCH 00/10] ARM: dts: AM33XX: Add device tree data   AnilKumar, Chimata
• [PATCH 00/10] ARM: dts: AM33XX: Add device tree data   AnilKumar, Chimata
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar, Chimata
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   AnilKumar, Chimata
• [PATCH RESEND 00/10] ARM: dts: AM33XX: Add device tree data   AnilKumar, Chimata
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar, Chimata
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar, Chimata
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar, Chimata
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   AnilKumar, Chimata
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar, Chimata
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   AnilKumar, Chimata
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   AnilKumar, Chimata
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar, Chimata
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   AnilKumar, Chimata
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar, Chimata
• [PATCH v2 4/4] ARM: dts: AM33XX: Enable system power off control in am335x-bone   AnilKumar, Chimata
• [PATCH v2 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   AnilKumar, Chimata
• [PATCH 0/3] can: Add D_CAN raminit support to am335x-evm   AnilKumar, Chimata
• [PATCH] OMAP2+: enable TPS65217 support in omap2plus_defconfig   AnilKumar, Chimata
• [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node   AnilKumar, Chimata
• [PATCH 1/3] can: c_can: Add d_can raminit support   AnilKumar, Chimata
• [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node   AnilKumar, Chimata
• [PATCH v2] can: c_can: Add d_can raminit support   AnilKumar, Chimata
• [PATCH v2] can: c_can: Add d_can raminit support   AnilKumar, Chimata
• [PATCH v3] can: c_can: Add d_can raminit support   AnilKumar, Chimata
• [PATCH v3 2/5] mfd: tps65217: Set PMIC to shutdown on PWR_EN toggle   AnilKumar, Chimata
• [PATCH v3 1/5] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar, Chimata
• [PATCH v3 3/5] ARM: dts: AM33XX: Set pmic-shutdown-controller for BeagleBone   AnilKumar, Chimata
• [PATCH 1/1] ARM: OMAP2+: enable support for GPIO connected LEDs   AnilKumar, Chimata
• [PATCH v3 5/5] ARM: OMAP2+: omap2plus_defconfig: Enable RTC support   AnilKumar, Chimata
• [PATCH 6/7] ARM: OMAP2+: omap2plus_defconfig: Enable leds-gpio driver   AnilKumar, Chimata
• [PATCH v2 1/3] power: Add simple poweroff-gpio driver   Simon Baatz
• [PATCH v2 3/3] ARM: Kirkwood: Convert IB62x0 to use gpio-poweroff.   Simon Baatz
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Felipe Balbi
• [PATCH 1/2] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCH 2/2] i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207   Felipe Balbi
• [PATCHv2 0/7] i2c: omap: updates   Felipe Balbi
• [PATCHv2 1/7] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCHv2 2/7] i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207   Felipe Balbi
• [PATCHv2 3/7] i2c: omap: remove the dtrev   Felipe Balbi
• [PATCHv2 4/7] ARM: i2c: omap: Remove the i207 errata flag   Felipe Balbi
• [PATCHv2 5/7] i2c: omap: re-factor omap_i2c_init function   Felipe Balbi
• [PATCHv2 6/7] i2c: omap: make reset a seperate function   Felipe Balbi
• [PATCHv2 7/7] i2c: omap: Restore i2c context always   Felipe Balbi
• [PATCH v2] i2c: omap: ensure writes to dev->buf_len are ordered   Felipe Balbi
• [PATCH v2 0/7] I2C patches for v3.8 merge window   Felipe Balbi
• [PATCHv2 1/7] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCHv2 3/7] i2c: omap: remove the dtrev   Felipe Balbi
• [PATCHv2 1/7] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCHv2 1/7] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCHv3 1/8] i2c: omap: Fix the revision register read   Felipe Balbi
• [PATCHv3 3/8] i2c: omap: remove the dtrev   Felipe Balbi
• [PATCHv3 8/8] i2c: omap: cleanup the sysc write   Felipe Balbi
• [PATCHv3 8/8] i2c: omap: cleanup the sysc write   Felipe Balbi
• OMAP baseline test results for v3.7-rc3   Felipe Balbi
• OMAP baseline test results for v3.7-rc3   Felipe Balbi
• [PATCHv2 1/6] arch: Change defconfigs to point to g_mass_storage.   Felipe Balbi
• [PATCH v2] ARM: dts: AM33XX: Add usbss node   Felipe Balbi
• [PATCH v2] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete   Felipe Balbi
• [PATCHv2 1/6] arch: Change defconfigs to point to g_mass_storage.   Felipe Balbi
• [PATCH] ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC   Felipe Balbi
• [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Felipe Balbi
• [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Felipe Balbi
• [PATCHv2] ARM: OMAP4: USB: power down MUSB PHY during boot   Felipe Balbi
• Porting board initialization for fdt   Felipe Balbi
• [PATCH v3] i2c: omap: ensure writes to dev->buf_len are ordered   Felipe Balbi
• [PATCH] ARM: OMAP2+: Fix compiler warning for 32k timer   Felipe Balbi
• [PATCH] ARM: OMAP2+: Fix compiler warning for 32k timer   Felipe Balbi
• [PATCH 5/9] usb: add phy connection by phy-mode   Felipe Balbi
• [PATCH 5/9] usb: add phy connection by phy-mode   Felipe Balbi
• [PATCH 5/9] usb: add phy connection by phy-mode   Felipe Balbi
• [PATCH] OMAP: board-files: fix i2c_bus for tfp410   Felipe Balbi
• [PATCH] OMAP: board-files: fix i2c_bus for tfp410   Felipe Balbi
• tfp410 and i2c_bus_num (was: Re: [PATCH] OMAP: board-files: fix i2c_bus for tfp410)   Felipe Balbi
• tfp410 and i2c_bus_num   Felipe Balbi
• tfp410 and i2c_bus_num   Felipe Balbi
• tfp410 and i2c_bus_num   Felipe Balbi
• [PATCH 119/493] usb: remove use of __devexit_p   Felipe Balbi
• [PATCH 159/493] usb: remove use of __devinit   Felipe Balbi
• [PATCH 431/493] usb: remove use of __devexit   Felipe Balbi
• [PATCH 3/5] ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h   Felipe Balbi
• [PATCH 4/5] ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h   Felipe Balbi
• [PATCH] i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag   Felipe Balbi
• [PATCHv2] i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag   Felipe Balbi
• [PATCH RFC] i2c: omap: Remove the OMAP_I2C_IP_VERSION_*   Felipe Balbi
• [PATCH 01/27] usb: gadget: mv_udc: use udc_start and udc_stop functions   Felipe Balbi
• [PATCH 01/27] usb: gadget: mv_udc: use udc_start and udc_stop functions   Felipe Balbi
• [PATCH 1/3] i2c: exynos5: add High Speed I2C controller driver   Felipe Balbi
• [V2 PATCH 00/27] mv-usb fix and enhancement patches   Felipe Balbi
• [PATCH 5/8] mmc: dw_mmc: fix modular build for exynos back-end   Chris Ball
• [PATCH 6/8] mmc: dw_mmc: constify dw_mci_idmac_ops in exynos back-end   Chris Ball
• [PATCH] dt: Document: Add optional dw_mmc pm bindings   Chris Ball
• [PATCH] mmc: Standardise capability type   Chris Ball
• [PATCH] mmc: Standardise capability type   Chris Ball
• [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove   Chris Ball
• [PATCH] ARM: dts: add missing ux500 device trees   Fabio Baltieri
• [PATCH 2/2] cpufreq: governors: remove redundant code   Fabio Baltieri
• [PATCH 02/24] MAINTAINERS: remove arch/arm/common/time-acorn.c   Cesar Eduardo Barros
• [PATCH 03/24] MAINTAINERS: remove arch/arm/plat-s5p/   Cesar Eduardo Barros
• [PATCH 04/24] MAINTAINERS: fix drivers/rtc/rtc-vt8500.c   Cesar Eduardo Barros
• [PATCH 05/24] MAINTAINERS: fix arch/arm/mach-at91/include/mach/at_hdmac.h   Cesar Eduardo Barros
• [PATCH 11/24] MAINTAINERS: fix .../plat-mxc/include/mach/imxfb.h   Cesar Eduardo Barros
• [PATCH 18/24] MAINTAINERS: remove drivers/mmc/host/imxmmc.*   Cesar Eduardo Barros
• gic_set_affinity   Robert Beckett
• gic_set_affinity   Robert Beckett
• gic_set_affinity   Robert Beckett
• gic_set_affinity   Robert Beckett
• [PATCH] lpc32xx: irq - Set the chain handlers after setting up the IRQ domain   Alban Bedel
• [PATCH] lpc32xx: irq - Set the chain handlers after setting up the IRQ domain   Alban Bedel
• [PATCH] lpc32xx: Add the motor PWM clock   Alban Bedel
• [PATCH] pwm: lpc32xx - Add a driver for the motor PWM   Alban Bedel
• [PATCH V2 0/2] pwm: lpc32xx - Add a driver for the motor PWM   Alban Bedel
• [PATCH 1/2] pwm: lpc32xx - Add a driver for the motor PWM   Alban Bedel
• [PATCH 2/2] ARM: LPC32xx: Add the motor PWM to base dts file   Alban Bedel
• [RFC 00/15] Add basic suspend-resume support for AM33XX   Vaibhav Bedia
• [PATCH 01/15] ARM: OMAP2+: mailbox: Add an API for flushing the FIFO   Vaibhav Bedia
• [PATCH 02/15] ARM: OMAP2+: mailbox: Add support for AM33XX   Vaibhav Bedia
• [PATCH 03/15] ARM: OMAP: mailbox: Convert to device_initcall   Vaibhav Bedia
• [PATCH 04/15] ARM: OMAP2+: hwmod: Update the reset API for AM33XX   Vaibhav Bedia
• [PATCH 05/15] ARM: OMAP2+: AM33XX: Update WKUP_M3 hwmod entry for reset status   Vaibhav Bedia
• [PATCH 06/15] ARM: OMAP2+: hwmod: Enable OCMCRAM registration in AM33XX   Vaibhav Bedia
• [PATCH 07/15] ARM: OMAP2+: hwmod: Update the hwmod data for TPTCs in AM33XX   Vaibhav Bedia
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Vaibhav Bedia
• [PATCH 09/15] ARM: OMAP: AM33XX: Remove unnecessary include and use __ASSEMBLER__ macros   Vaibhav Bedia
• [PATCH 10/15] ARM: OMAP2+: control: Add some AM33XX Control module registers   Vaibhav Bedia
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Vaibhav Bedia
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Vaibhav Bedia
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Vaibhav Bedia
• [PATCH 14/15] ARM: OMAP2+: omap2plus_defconfig: Enable Mailbox   Vaibhav Bedia
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Vaibhav Bedia
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Bedia, Vaibhav
• [PATCH 01/15] ARM: OMAP2+: mailbox: Add an API for flushing the FIFO   Bedia, Vaibhav
• [RFC 00/15] Add basic suspend-resume support for AM33XX   Bedia, Vaibhav
• [PATCH 02/15] ARM: OMAP2+: mailbox: Add support for AM33XX   Bedia, Vaibhav
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Bedia, Vaibhav
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Bedia, Vaibhav
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Bedia, Vaibhav
• [PATCH 14/15] ARM: OMAP2+: omap2plus_defconfig: Enable Mailbox   Bedia, Vaibhav
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Bedia, Vaibhav
• [PATCH 02/15] ARM: OMAP2+: mailbox: Add support for AM33XX   Bedia, Vaibhav
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Bedia, Vaibhav
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Bedia, Vaibhav
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Bedia, Vaibhav
• [PATCH 01/15] ARM: OMAP2+: mailbox: Add an API for flushing the FIFO   Bedia, Vaibhav
• [PATCH 02/15] ARM: OMAP2+: mailbox: Add support for AM33XX   Bedia, Vaibhav
• [PATCH 05/15] ARM: OMAP2+: AM33XX: Update WKUP_M3 hwmod entry for reset status   Bedia, Vaibhav
• [PATCH 06/15] ARM: OMAP2+: hwmod: Enable OCMCRAM registration in AM33XX   Bedia, Vaibhav
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Bedia, Vaibhav
• [PATCH 09/15] ARM: OMAP: AM33XX: Remove unnecessary include and use __ASSEMBLER__ macros   Bedia, Vaibhav
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Bedia, Vaibhav
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Bedia, Vaibhav
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Bedia, Vaibhav
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Bedia, Vaibhav
• [PATCH 04/15] ARM: OMAP2+: hwmod: Update the reset API for AM33XX   Bedia, Vaibhav
• [PATCH 06/15] ARM: OMAP2+: hwmod: Enable OCMCRAM registration in AM33XX   Bedia, Vaibhav
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Bedia, Vaibhav
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Bedia, Vaibhav
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   Bedia, Vaibhav
• [PATCH 1/8] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Bedia, Vaibhav
• [PATCH 5/8] pwm: pwm-tiehrpwm: Add device-tree binding support for EHRPWM driver   Bedia, Vaibhav
• [PATCH 6/8] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Bedia, Vaibhav
• [PATCH 8/8] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm   Bedia, Vaibhav
• [PATCH 04/15] ARM: OMAP2+: hwmod: Update the reset API for AM33XX   Bedia, Vaibhav
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Bedia, Vaibhav
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Bedia, Vaibhav
• [PATCH 3/7] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module   Bedia, Vaibhav
• [PATCH 3/8] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Bedia, Vaibhav
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Bedia, Vaibhav
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Bedia, Vaibhav
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Bedia, Vaibhav
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Bedia, Vaibhav
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Bedia, Vaibhav
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Bedia, Vaibhav
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Bedia, Vaibhav
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Bedia, Vaibhav
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Bedia, Vaibhav
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Bedia, Vaibhav
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Bedia, Vaibhav
• [PATCH v3 03/10] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Bedia, Vaibhav
• [PATCH v3 1/5] rtc: OMAP: Add system pm_power_off to rtc driver   Bedia, Vaibhav
• [PATCH v3 03/10] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Bedia, Vaibhav
• [PATCH] ARM: gic: Fix sparse warning   Tushar Behera
• [PATCH] ARM: gic: Fix sparse warning   Tushar Behera
• [PATCH] ARM: EXYNOS: Add support for ORIGEN4QUAD board   Tushar Behera
• [PATCH v2] ARM: gic: Fix sparse warning   Tushar Behera
• [PATCH] mfd: ab8500-core: Fix invalid free of devm_ allocated data   Tushar Behera
• [PATCH] dmaengine: imx-dma: fix missing irq disable in tasklet   Dirk Behme
• [PATCH 01/10] ARM: imx6q: print silicon version on boot   Dirk Behme
• [PATCH] video: mxsfb: fix typo: 'FAILING' instead of 'FALLING'   Juergen Beisert
• [BUGFIX PATCH] video: mxsfb: fix crash when unblanking the display   Juergen Beisert
• [PATCH v5 0/6] Move rest of omap-iommu to live in drivers/iommu   Ohad Ben-Cohen
• [PATCH v4 2/2] ARM: OMAP3/4: iommu: adapt to runtime pm   Ohad Ben-Cohen
• [PATCH] remoteproc: fix error path of ->find_vqs   Ohad Ben-Cohen
• [PATCH v4 2/2] ARM: OMAP3/4: iommu: adapt to runtime pm   Ohad Ben-Cohen
• [PATCH v5 0/5] OMAP: iommu: hwmod, reset handling and runtime PM   Ohad Ben-Cohen
• [GIT PULL] remoteproc: a single fix for 3.7   Ohad Ben-Cohen
• [PATCH 1/8] mfd: ab8500-core: Remove unused ab8500-gpio IRQ ranges   Arnd Bergmann
• vexpress issues in next-20121029   Arnd Bergmann
• vexpress issues in next-20121029   Arnd Bergmann
• Building for MMU-less vexpress targets   Arnd Bergmann
• [PATCH v2] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Arnd Bergmann
• [GIT PULL v2] Renesas ARM-based SoC defconfig for v3.8   Arnd Bergmann
• [PATCH v2] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Arnd Bergmann
• Building for MMU-less vexpress targets   Arnd Bergmann
• Building for MMU-less vexpress targets   Arnd Bergmann
• Building for MMU-less vexpress targets   Arnd Bergmann
• [PATCH 0/8] warning fixes for v3.7-rc4   Arnd Bergmann
• [PATCH 1/8] mtd: diskonchip: don't warn about ARM architecture   Arnd Bergmann
• [PATCH 2/8] mtd: diskonchip: use inline functions for DocRead/DocWrite   Arnd Bergmann
• [PATCH 3/8] mtd: uninitialized variable warning in map.h   Arnd Bergmann
• [PATCH 4/8] sched: warnings in kernel/sched/fair.c   Arnd Bergmann
• [PATCH 5/8] mmc: dw_mmc: fix modular build for exynos back-end   Arnd Bergmann
• [PATCH 6/8] mmc: dw_mmc: constify dw_mci_idmac_ops in exynos back-end   Arnd Bergmann
• [PATCH 7/8] ata: highbank: mark ahci_highbank_probe as __devinit   Arnd Bergmann
• [PATCH 8/8] drm/exynos: don't include plat/gpio-cfg.h   Arnd Bergmann
• [GIT PULL] Calxeda ECX-2000 support   Arnd Bergmann
• Building for MMU-less vexpress targets   Arnd Bergmann
• Building for MMU-less vexpress targets   Arnd Bergmann
• drivers/staging/ced1401/ced_ioc.c:918 GetTransfer() error: potential null dereference 'tx'. (kzalloc returns null)   Arnd Bergmann
• [PATCH 1/2] ARM: ux500: add PRCM register base for pinctrl   Arnd Bergmann
• [PATCH] ARM: VIC: remove unused irq_base variable   Arnd Bergmann
• [GIT PULL] vexpress: fixes for v3.8   Arnd Bergmann
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Arnd Bergmann
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the l2-mtd and pinctrl trees   Arnd Bergmann
• BUG: ARM build failures due to Xen   Arnd Bergmann
• [GIT PULL] vexpress: fixes for v3.8   Arnd Bergmann
• [Xen-devel] BUG: ARM build failures due to Xen   Arnd Bergmann
• [RFC PATCH 00/11] arch_gettimeoffset and ARM timer rework   Arnd Bergmann
• [GIT PULL] arm-soc: lpc32xx: platform updates   Arnd Bergmann
• Build failure: OMAP4430 failed due to exynos4 pinctrl   Arnd Bergmann
• [PATCH 0/6] ARM: integrator: SoC bus & cleanup   Arnd Bergmann
• [PATCH v2] Add support for generic BCM SoC chipsets   Arnd Bergmann
• [PATCH 01/14] pinctrl: SPEAr: add spi chipselect control driver   Arnd Bergmann
• [PATCH 12/14] ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT   Arnd Bergmann
• [PATCH 00/14] ARM: SPEAr: DT updates   Arnd Bergmann
• [PATCH v2 01/17] ARM: clps711x: Load serial driver from boards   Arnd Bergmann
• [PATCH v2 12/17] ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed   Arnd Bergmann
• [GIT PULL] musb regression fixes for v3.7-rc4   Arnd Bergmann
• [PATCH 12/14] ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT   Arnd Bergmann
• [PATCH v2] Add support for generic BCM SoC chipsets   Arnd Bergmann
• [PATCH] ARM: integrator: use BUG_ON where possible   Arnd Bergmann
• [GIT PULL v2] Renesas ARM-based SoC for v3.8 #2   Arnd Bergmann
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2   Arnd Bergmann
• [PATCH 0/7] ARM: remove init_consistent_dma_size() stub   Arnd Bergmann
• [GIT PULL] Ux500 pin changes   Arnd Bergmann
• [PATCH] [TRIVIAL] ARM: cns3xxx: drop unnessesary symbol selection   Arnd Bergmann
• [GIT PULL 1/1] omap fixes for v3.7-rc4   Arnd Bergmann
• [PATCH RESEND] ARM/SPI: New driver for SPI master controller for CLPS711X-target   Arnd Bergmann
• arm: at91: mach header cleanup   Arnd Bergmann
• [GIT PULL 1/1] omap plat header removal for v3.8 merge window, part4   Arnd Bergmann
• [PATCH] cpuidle: add Calxeda SOC idle support   Arnd Bergmann
• [PATCH] ARM: boot: Fix usage of kecho   Arnd Bergmann
• [PATCH V2 0/5] SMP support for Armada XP   Arnd Bergmann
• [GIT PULL] Ux500 pin changes   Arnd Bergmann
• [PATCH 05/10] sh: clkfwk: add sh_clk_fsidiv_register()   Arnd Bergmann
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2   Arnd Bergmann
• [PATCH 0/7] ARM: remove init_consistent_dma_size() stub   Arnd Bergmann
• [PATCH] ARM: add get_user() support for 8 byte types   Arnd Bergmann
• [PATCH 0/7] ARM: remove init_consistent_dma_size() stub   Arnd Bergmann
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC for v3.8 #4   Arnd Bergmann
• [PATCH V2 2/11] time: convert arch_gettimeoffset to a pointer   Arnd Bergmann
• arch-vt8500 and wm8850 support   Arnd Bergmann
• arch-vt8500 and wm8850 support   Arnd Bergmann
• [PATCH] ARM: add get_user() support for 8 byte types   Arnd Bergmann
• [PATCH] mmc: Standardise capability type   Arnd Bergmann
• [GIT PULL] Ux500 pin changes   Arnd Bergmann
• [PATCH] ARM: pxa: remove pxa95x support   Arnd Bergmann
• [PATCH] ARM: pxa: remove pxa95x support   Arnd Bergmann
• [PATCH] ARM: ux500: fix pin warning   Arnd Bergmann
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Arnd Bergmann
• [PATCH 1/1] ARM: ux500: Describe UART platform registering issues more accurately   Arnd Bergmann
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Arnd Bergmann
• [PATCH] ARM: pxa: remove pxa95x support   Arnd Bergmann
• [GIT PULL][for 3.8] pull request from upload/board in arch-pxa git tree   Arnd Bergmann
• [PATCH] ARM: add get_user() support for 8 byte types   Arnd Bergmann
• [PATCH] ARM: add get_user() support for 8 byte types   Arnd Bergmann
• [GIT PULL 1/6] omap cleanup fixes for v3.8 merge window   Arnd Bergmann
• [GIT PULL 1/5] omap non critical fixes for v3.8 merge window   Arnd Bergmann
• [GIT PULL 3/6] omap device tree updates for v3.8 merge window   Arnd Bergmann
• [arm-soc:for-next 24/32] arch/arm/mach-omap2/board-generic.c:115:13: error: 'omap_prcm_restart' undeclared here (not in a function)   Arnd Bergmann
• [PATCH 0/6] Add basic support for Allwinner A1X SoCs   Arnd Bergmann
• Additional updates for armsoc-3.8   Arnd Bergmann
• [PATCH] ARM: add get_user() support for 8 byte types   Arnd Bergmann
• [PATCH 01/16] gpio: SPEAr: add spi chipselect control driver   Arnd Bergmann
• [PATCH 1/1] ARM: ux500: Describe UART platform registering issues more accurately   Arnd Bergmann
• [PATCH 1/1] ARM: ux500: Describe UART platform registering issues more accurately   Arnd Bergmann
• [GIT PULL] i.MX fixes for -rc   Arnd Bergmann
• [GIT PULL] at91: fixes for 3.7-rc6   Arnd Bergmann
• [GIT PULL] i.MX SoC updates   Arnd Bergmann
• [GIT PULL] i.MX dt updates   Arnd Bergmann
• [GIT PULL] MTU clock fixes   Arnd Bergmann
• [GIT PULL] arm-soc: Xilinx zynq changes for v3.8   Arnd Bergmann
• [GIT PULL] mxs changes for 3.8   Arnd Bergmann
• [GIT PULL] imx device tree changes for 3.8   Arnd Bergmann
• [PATCH] Documentation: correct argument list for of_platform_populate correction to match of_platform.h prototype   Arnd Bergmann
• [GIT PULL] arm-soc: Xilinx zynq changes for v3.8   Arnd Bergmann
• Final call for 3.8 arm-soc patches   Arnd Bergmann
• [PATCHv2 0/7] Add basic support for Allwinner A1X SoCs   Arnd Bergmann
• [PATCHv2 0/7] Add basic support for Allwinner A1X SoCs   Arnd Bergmann
• Final call for 3.8 arm-soc patches   Arnd Bergmann
• [PATCH v3 00/18] ARM: Patchset for CLPS711X   Arnd Bergmann
• [PATCH V3] Add support for generic BCM SoC chipsets   Arnd Bergmann
• [PATCH V3] Add support for generic BCM SoC chipsets   Arnd Bergmann
• [PATCH V3] Add support for generic BCM SoC chipsets   Arnd Bergmann
• [PATCH v3] video: Versatile Express DVI output driver   Arnd Bergmann
• [PATCH 1/4] ARM: sunxi: Restructure sunxi dts/dtsi files   Arnd Bergmann
• [PATCH 2/4] ARM: sunxi: Add earlyprintk support for UART0 (sun4i)   Arnd Bergmann
• [PATCH 3/4] ARM: sunxi: Add sun4i and cubieboard support   Arnd Bergmann
• [PATCH 4/4] ARM: sunxi: Add sunxi restart function via onchip watchdog   Arnd Bergmann
• [PATCH] clk: move IM-PD1 clocks to drivers/clk   Arnd Bergmann
• [PATCH V4 1/3] of: introduce for_each_matching_node_and_match()   Arnd Bergmann
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Arnd Bergmann
• [GIT PULL]: spear-for-3.8 (was earlier: Re: [PATCH 00/14] ARM: SPEAr: DT updates)   Arnd Bergmann
• [PATCH] ARM: Fix Kconfig symbols typo for LEDS   Arnd Bergmann
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Arnd Bergmann
• [GIT PULL] ARM: ixp4xx: fixes for v3.7   Arnd Bergmann
• [GIT PULL] ST-Ericsson Device Tree patches   Arnd Bergmann
• [PATCH] ARM: sunxi: Add missing sun4i.dtsi file   Arnd Bergmann
• [GIT PULL] Integrator SoC bus patches   Arnd Bergmann
• [GIT PULL] ARM: ixp4xx: fixes for v3.7   Arnd Bergmann
• [Patch v6 4/4] ASoC: at91sam9g20ek-wm8731: convert to dt support   Arnd Bergmann
• [GIT PULL] Integrator changes for v3.8   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the usb tree   Arnd Bergmann
• linux-next: manual merge of the arm-soc tree with the battery tree   Arnd Bergmann
• [Patch v6 4/4] ASoC: at91sam9g20ek-wm8731: convert to dt support   Arnd Bergmann
• [PATCH] ARM: use clockevents_config_and_register() where possible   Arnd Bergmann
• [GIT PULL v3] ST-Ericsson Device Tree patches   Arnd Bergmann
• [PATCH 1/1] ARM: ux500: Fix u9540 booting issues   Arnd Bergmann
• [GIT PULL] ARM: final SoC fixes for 3.7   Arnd Bergmann
• [GIT PULL] ARM: final SoC fixes for 3.7   Arnd Bergmann
• [GIT PULL] ARM: ixp4xx bug fixes   Arnd Bergmann
• Branches next/soc and for-next   Arnd Bergmann
• KEXEC on ARM cortex-a15   Naresh Bhat
• KEXEC on ARM cortex-a15   Naresh Bhat
• KDUMP on ARM Cortex-a15   Naresh Bhat
• KEXEC on ARM cortex-a15   Naresh Bhat
• KEXEC on ARM cortex-a15   Naresh Bhat
• KEXEC on ARM cortex-a15   Naresh Bhat
• KEXEC on ARM cortex-a15   Naresh Bhat
• KEXEC on ARM cortex-a15   Naresh Bhat
• [PATCH] Revert "serial: omap: fix software flow control"   Andreas Bießmann
• [PATCH] dma: add new DMA control commands   Artem Bityutskiy
• [PATCH v3 1/3] mtd: sh_flctl: Minor cleanups   Artem Bityutskiy
• [PATCH 1/8] mtd: diskonchip: don't warn about ARM architecture   Artem Bityutskiy
• [PATCH 1/1] mtd: physmap_of: allow to specify the mtd name for retro compatiblity   Artem Bityutskiy
• Possible regression in arm/io.h   Artem Bityutskiy
• [PATCH 135/493] mtd: remove use of __devexit_p   Artem Bityutskiy
• Possible regression in arm/io.h   Artem Bityutskiy
• [PATCH 03/11] m68k: set arch_gettimeoffset directly   Phil Blundell
• [PATCH net-next 1/2] ARM: net: bpf_jit_32: add XOR instruction for BPF JIT   Daniel Borkmann
• [PATCH net-next 2/2] ARM: net: bpf_jit_32: add VLAN instructions for BPF JIT   Daniel Borkmann
• [PATCH] arm: zynq: add system level control register manager   Daniel Borkmann
• [PATCH] arm: zynq: add system level control register manager   Daniel Borkmann
• [PATCH v2] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.   Nick Bowler
• [PATCH v3] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.   Nick Bowler
• [PATCH 4/4] DMA: PL330: add device tree property for DMA_MEMCPY capability   Jassi Brar
• [PATCH 1/8 v3] DMA: PL330: use prefix in reg names to build under x86   Jassi Brar
• [PATCH 1/8 v3] DMA: PL330: use prefix in reg names to build under x86   Jassi Brar
• [PATCH v2 2/5] clk: Add support for fundamental zynq clks   Soren Brinkmann
• [PATCH v2 0/5] zynq clk support   Soren Brinkmann
• [PATCH 075/493] mfd: remove use of __devexit_p   David Brown
• [PATCH 158/493] video: remove use of __devinit   David Brown
• [PATCH 235/493] mfd: remove use of __devinit   David Brown
• [PATCH 270/493] arm: remove use of __devinit   David Brown
• [PATCH 412/493] mfd: remove use of __devexit   David Brown
• [PATCH 429/493] tty: remove use of __devexit   David Brown
• [PATCH 6/8] mmc: use the new <linux/sizes.h>   David Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [Patch v2 3/4] ASoC: atmel-ssc-dai: register platform from DAIs   Mark Brown
• [PATCH 1/3] spi: spidev: Add device tree bindings   Mark Brown
• [PATCH 2/3] spi: spidev: Add Rohm DH2228FV DAC compatible string   Mark Brown
• [PATCH v2] ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore   Mark Brown
• [Patch v2 3/4] ASoC: atmel-ssc-dai: register platform from DAIs   Mark Brown
• [PATCH 2/3] ARM: OMAP: Remove NEED_MACH_GPIO_H   Mark Brown
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Mark Brown
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Mark Brown
• [PATCH 1/2] ASoC: Ux500: Fixup use of clocks   Mark Brown
• [RFC patch v3 3/4] ASoC: atmel-ssc-dai: register dai and pcm directly   Mark Brown
• [Patch v2 3/4] ASoC: atmel-ssc-dai: register platform from DAIs   Mark Brown
• [RFC patch v3 1/4] ARM: at91: atmel-ssc: add platform device id table   Mark Brown
• [RFC patch v3 2/4] ARM: at91: atmel-ssc: add device tree support   Mark Brown
• [RFC patch v3 3/4] ASoC: atmel-ssc-dai: register dai and pcm directly   Mark Brown
• [PATCH] spi: s3c64xx: Add fix for crash in spi suspend/resume   Mark Brown
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Mark Brown
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Mark Brown
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Mark Brown
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Mark Brown
• [PATCH] ARM: mxs: apf28dev: Add I2C, SPI and spidev support   Mark Brown
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Mark Brown
• [RESEND PATCH 1/2] ASoC: Ux500: Fixup use of clocks   Mark Brown
• [PATCH 4/6] ASoC: wm8974: add SPI as a possible bus master   Mark Brown
• [PATCH 3/6] ASoC: wm8974: include MCLKDIV in pll_factors   Mark Brown
• [PATCH 5/6] ARM i.MX: rename ssi1 clock for imx27   Mark Brown
• [PATCH 4/6] ASoC: wm8974: add SPI as a possible bus master   Mark Brown
• [PATCH 6/6] ASoC: fsl: add imx-wm8974 machine driver   Mark Brown
• [PATCH 1/6] spi: imx: specify spi base for device tree probe   Mark Brown
• [PATCH 1/1] regulator: gpio-regulator: fix crash when no states property in dt   Mark Brown
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2   Mark Brown
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Mark Brown
• [PATCH 1/2] regulator: gpio-regulator: doc: Fix wrong key gpio-enable   Mark Brown
• [PATCH 2/2] regulator: gpio-regulator: fix can't find regulator node in dt   Mark Brown
• [RFC PATCH v4 2/2] ASoC: sam9g20-wm8731: convert to dt support   Mark Brown
• [PATCH 1/1] regulator: gpio-regulator: fix crash when no states property in dt   Mark Brown
• [PATCH 1/1] regulator: gpio-regulator: fix crash when no states property in dt   Mark Brown
• [PATCH v5 2/3] ASoC: atmel-ssc-dai: register dai and pcm directly   Mark Brown
• [PATCH v5 1/3] ARM: at91: atmel-ssc: add pinctrl support   Mark Brown
• [PATCH v5 2/3] ASoC: atmel-ssc-dai: register dai and pcm directly   Mark Brown
• [PATCH v5 2/3] ASoC: atmel-ssc-dai: register dai and pcm directly   Mark Brown
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2   Mark Brown
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2   Mark Brown
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   Mark Brown
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   Mark Brown
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   Mark Brown
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   Mark Brown
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   Mark Brown
• [PATCH] ARM: S3C64XX: Add missing device selects for Cragganmore   Mark Brown
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   Mark Brown
• [Patch v6 1/4] ARM: at91: atmel-ssc: add pinctrl support   Mark Brown
• [Patch v6 2/4] ASoC: atmel-ssc-dai: register dai and pcm directly   Mark Brown
• [Patch v6 3/4] ASoC: atmel-ssc-dai: match new method of dai and pcm register   Mark Brown
• [Patch v6 4/4] ASoC: at91sam9g20ek-wm8731: convert to dt support   Mark Brown
• [Patch v6 1/4] ARM: at91: atmel-ssc: add pinctrl support   Mark Brown
• [Resend v6 PATCH 2/2] ASoC: atmel-ssc: add pinctrl consumer   Mark Brown
• [Resend v6 PATCH 2/2] ASoC: atmel-ssc: add pinctrl consumer   Mark Brown
• [PATCH 050/493] clk: remove use of __devexit_p   Mark Brown
• [PATCH 223/493] clk: remove use of __devinit   Mark Brown
• [PATCH 340/493] arm: remove use of __devinitdata   Mark Brown
• [PATCH 360/493] mfd: remove use of __devinitconst   Mark Brown
• [PATCH 394/493] clk: remove use of __devexit   Mark Brown
• [PATCH 3/4] i2c-s3c2410: use exponential back off while polling for bus idle   Mark Brown
• Forward: [PATCH 146/493] ASoC: remove use of __devexit_p   Mark Brown
• [PATCH 075/493] mfd: remove use of __devexit_p   Mark Brown
• [PATCH 123/493] watchdog: remove use of __devexit_p   Mark Brown
• [PATCH 140/493] rtc: remove use of __devexit_p   Mark Brown
• [PATCH 152/493] watchdog: remove use of __devinit   Mark Brown
• [PATCH 230/493] input: remove use of __devinit   Mark Brown
• [PATCH 235/493] mfd: remove use of __devinit   Mark Brown
• [PATCH 270/493] arm: remove use of __devinit   Mark Brown
• [PATCH 408/493] input: remove use of __devexit   Mark Brown
• [PATCH 412/493] mfd: remove use of __devexit   Mark Brown
• [PATCH 422/493] rtc: remove use of __devexit   Mark Brown
• [PATCH 435/493] watchdog: remove use of __devexit   Mark Brown
• [PATCH 2/2] ASoC: atmel-pcm: add dma support   Mark Brown
• [PATCH 3/4] i2c-s3c2410: use exponential back off while polling for bus idle   Mark Brown
• [PATCH 1/2] ASoC: atmel-ssc: add phybase in device structure   Mark Brown
• [PATCH 2/2] ASoC: atmel-pcm: add dma support   Mark Brown
• [Resend v6 PATCH 2/2] ASoC: atmel-ssc: add pinctrl consumer   Mark Brown
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Mark Brown
• [Resend v6 PATCH 2/2] ASoC: atmel-ssc: add pinctrl consumer   Mark Brown
• [Resend PATCH v6 1/4] pinctrl: atmel-ssc: add pinctrl support   Mark Brown
• [PATCH 9/9] ARM: remove mach .handle_irq for VIC users   Mark Brown
• [PATCH 2/2] i2c: s3c2410: Get the i2c bus number from alias id   Mark Brown
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Mark Brown
• [PATCH 0/10] Kirkwood ASoC drivers fixes and improvements   Mark Brown
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Mark Brown
• [RESENDING] [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Mark Brown
• [RESENDING] [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Mark Brown
• [PATCH V3 0/5] Avoid passing clks through platform data   Mark Brown
• [PATCH 1/1] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Mark Brown
• [PATCH 3/3] ASoC: atmel-pcm: add dma support   Mark Brown
• [PATCH 3/3] ASoC: atmel-pcm: add dma support   Mark Brown
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Mark Brown
• [PATCH 1/2] ASoC: davinci-mcasp: Add pinctrl support   Mark Brown
• [PATCH 2/2] ASoC: Davinci: machine: Add device tree binding   Mark Brown
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Mark Brown
• [RFC PATCH] ASoC: Samsung: Register the audio platform device   Mark Brown
• [PATCH] ARM: SAMSUNG: Fix build of I2S driver   Mark Brown
• [PATCH] ARM: S3C64XX: Add registration of WM2200 Bells device on Cragganmore   Mark Brown
• [PATCH] ARM: SAMSUNG: Fix build of I2S driver   Mark Brown
• [Patch v6 4/4] ASoC: at91sam9g20ek-wm8731: convert to dt support   Mark Brown
• [PATCH 1/3] Input: bu21013_ts - Request a regulator that actually exists   Mark Brown
• [PATCH 1/2] ASoC: davinci-mcasp: Add pinctrl support   Mark Brown
• [PATCH] ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs   Mark Brown
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Mark Brown
• [GIT PULL] ASoC: Samsung: Updates for v3.8   Mark Brown
• [PATCH 3/3] Input: bu21013_ts - Add support for Device Tree booting   Mark Brown
• [PATCH V4 1/2] ASoC: Samsung: Get I2S src_clk from clock alias id.   Mark Brown
• [PATCH 3/3] Input: bu21013_ts - Add support for Device Tree booting   Mark Brown
• [PATCH 3/3] Input: bu21013_ts - Add support for Device Tree booting   Mark Brown
• [PATCH 2/2] i2c-s3c2410: Add bus arbitration implementation   Mark Brown
• [PATCH 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices   Matthias Brugger
• [PATCH 2/3] ARM/dts: omap3: Add support for IGEPv2 board   Matthias Brugger
• [PATCH] ARM: imx: ehci: fix host power mask bit   Michael D. Burkey
• [PATCH 2/5] ARM: AT91SAM9G45: same platform data structure for all crypto peripherals   Eric Bénard
• [PATCH 2/5 v2] ARM: AT91SAM9G45: same platform data structure for all crypto peripherals   Eric Bénard
• [PATCH v2 1/2] ARM: mx27_3ds: Add VPU support   Eric Bénard
• ARM: imx: ehci-imx35: fix host power mask bit   Eric Bénard
• [PATCH] ARM: eukrea_mbimx27-baseboard - use stock get_pendown_state() in ads7846   Eric Bénard
• [PATCH 0/2] L2CC shared mutex with ARM TZ   Etienne CARRIERE
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Etienne CARRIERE
• [PATCH 2/2] mach-ux500: L2CC shared mutex with ARM TZ   Etienne CARRIERE
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Matthieu CASTET
• [PATCH 7/9] usb: chipidea: udc: add force-full-speed option   Matthieu CASTET
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Matthieu CASTET
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V2 0/5] SMP support for Armada XP   Gregory CLEMENT
• [PATCH V2 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V3 0/5] SMP support for Armada XP   Gregory CLEMENT
• [PATCH V3 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V3 2/5] arm: mvebu: Added initial support for power managmement service unit   Gregory CLEMENT
• [PATCH V3 3/5] arm: mvebu: Added IPI support via doorbells   Gregory CLEMENT
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V3 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V3 0/5] SMP support for Armada XP   Gregory CLEMENT
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V2 0/3] Add hardware I/O coherency support for Armada 370/XP   Gregory CLEMENT
• [PATCH V2 1/3] arm: dma mapping: Export dma ops functions   Gregory CLEMENT
• [PATCH V2 2/3] arm: plat-orion: Add coherency attribute when setup mbus target   Gregory CLEMENT
• [PATCH V2 3/3] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH 0/7] core, cpu and gated clocks for mvebu   Gregory CLEMENT
• [PATCH 1/7] clk: mvebu: add mvebu core clocks.   Gregory CLEMENT
• [PATCH 7/7] ARM: Kirkwood: switch to DT clock providers   Gregory CLEMENT
• [PATCH 0/2] Add clock gating support for Armada 370/XP   Gregory CLEMENT
• [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT   Gregory CLEMENT
• [PATCH 2/2] arm: mvebu: armada 370/XP adding clock gating support: dt binding   Gregory CLEMENT
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT   Gregory CLEMENT
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V2 1/3] arm: dma mapping: Export dma ops functions   Gregory CLEMENT
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V4 0/5] SMP support for Armada XP   Gregory CLEMENT
• [PATCH V4 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V4 2/5] arm: mvebu: Added initial support for power managmement service unit   Gregory CLEMENT
• [PATCH V4 3/5] arm: mvebu: Added IPI support via doorbells   Gregory CLEMENT
• [PATCH V4 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V4 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH V4 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V4 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH V4 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH V2 3/3] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH V5 0/5] SMP support for Armada XP   Gregory CLEMENT
• [PATCH V5 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V5 2/5] arm: mvebu: Added initial support for power managmement service unit   Gregory CLEMENT
• [PATCH V5 3/5] arm: mvebu: Added IPI support via doorbells   Gregory CLEMENT
• [PATCH V5 4/5] arm: mm: Added support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V5 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH V3 0/3] Add hardware I/O coherency support for Armada 370/XP   Gregory CLEMENT
• [PATCH V3 1/3] arm: dma mapping: Export dma ops functions   Gregory CLEMENT
• [PATCH V3 2/3] arm: plat-orion: Add coherency attribute when setup mbus target   Gregory CLEMENT
• [PATCH V3 3/3] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [GIT PULL] SMP support for Armada XP   Gregory CLEMENT
• [PATCH V3 1/3] arm: dma mapping: Export dma ops functions   Gregory CLEMENT
• [PATCH V3 1/3] arm: dma mapping: Export dma ops functions   Gregory CLEMENT
• [PATCH V4 0/3] Add hardware I/O coherency support for Armada 370/XP   Gregory CLEMENT
• [PATCH V4 1/3] arm: dma mapping: Export a dma ops function arm_dma_set_mask   Gregory CLEMENT
• [PATCH V4 2/3] arm: plat-orion: Add coherency attribute when setup mbus target   Gregory CLEMENT
• [PATCH V4 3/3] arm: mvebu: Add hardware I/O Coherency support   Gregory CLEMENT
• [PATCH V4 1/3] arm: dma mapping: Export a dma ops function arm_dma_set_mask   Gregory CLEMENT
• [GIT PULL] Add hardware I/O coherency support for Armada 370/XP   Gregory CLEMENT
• [PATCH V5 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V5 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH V5 5/5] arm: mvebu: Added SMP support for Armada XP   Gregory CLEMENT
• [PATCH V5 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V6 0/5] SMP support for Armada XP   Gregory CLEMENT
• [PATCH V6 1/5] arm: mvebu: Add support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V6 2/5] arm: mvebu: Add initial support for power managmement service unit   Gregory CLEMENT
• [PATCH V6 3/5] arm: mvebu: Add IPI support via doorbells   Gregory CLEMENT
• [PATCH V6 4/5] arm: mm: Add support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V6 5/5] arm: mvebu: Add SMP support for Armada XP   Gregory CLEMENT
• [PATCH V7 0/5] SMP support for Armada XP   Gregory CLEMENT
• [PATCH V7 1/5] arm: mvebu: Add support for coherency fabric in mach-mvebu   Gregory CLEMENT
• [PATCH V7 2/5] arm: mvebu: Add initial support for power managmement service unit   Gregory CLEMENT
• [PATCH V7 3/5] arm: mvebu: Add IPI support via doorbells   Gregory CLEMENT
• [PATCH V7 4/5] arm: mm: Add support for PJ4B cpu and init routines   Gregory CLEMENT
• [PATCH V7 5/5] arm: mvebu: Add SMP support for Armada XP   Gregory CLEMENT
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Gregory CLEMENT
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Gregory CLEMENT
• [Xen-devel] BUG: ARM build failures due to Xen   Ian Campbell
• [PATCH 1/1] ARM: OMAP2+: enable devtmpfs and devtmpfs automount   Javier Martinez Canillas
• [PATCH 230/493] input: remove use of __devinit   Javier Martinez Canillas
• [PATCH 1/1] ARM: OMAP3: igep0020: default boot status LED to On instead of Heartbeat   Javier Martinez Canillas
• [PATCH 1/1] ARM: OMAP2+: enable support for GPIO connected LEDs   Javier Martinez Canillas
• [PATCH 6/7] ARM: OMAP2+: omap2plus_defconfig: Enable leds-gpio driver   Javier Martinez Canillas
• [PATCH 1/1] ARM: OMAP2+: enable support for GPIO connected LEDs   Javier Martinez Canillas
• [PATCH 1/1] ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio   Javier Martinez Canillas
• [PATCH 1/1] ARM: OMAP2+: enable devtmpfs and devtmpfs automount   Javier Martinez Canillas
• [PATCH 0/3] ARM/dts: omap3: Add DT support for IGEP devices   Javier Martinez Canillas
• [PATCH 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices   Javier Martinez Canillas
• [PATCH 2/3] ARM/dts: omap3: Add support for IGEPv2 board   Javier Martinez Canillas
• [PATCH 3/3] ARM/dts: omap3: Add support for IGEP COM Module   Javier Martinez Canillas
• [PATCH v2 0/3] ARM/dts: omap3: Add DT support for IGEP devices   Javier Martinez Canillas
• [PATCH v2 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices   Javier Martinez Canillas
• [PATCH v2 2/3] ARM/dts: omap3: Add support for IGEPv2 board   Javier Martinez Canillas
• [PATCH v2 3/3] ARM/dts: omap3: Add support for IGEP COM Module   Javier Martinez Canillas
• [PATCH 8/8] clocksource: xilinx_ttc: add OF_CLK support   Josh Cartwright
• [PATCH 5/8] ARM: zynq: add COMMON_CLK support   Josh Cartwright
• [PATCH 7/8] serial: xilinx_uartps: get clock rate info from dts   Josh Cartwright
• [PATCH 5/8] ARM: zynq: add COMMON_CLK support   Josh Cartwright
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Josh Cartwright
• [PATCH 2/8] ARM: zynq: move ttc timer code to drivers/clocksource   Josh Cartwright
• [PATCH v3] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.   Josh Cartwright
• [PATCH v3 2/4] arm: bcm2835: convert to the irqchip infrastructure   Josh Cartwright
• [PATCH v3 2/4] arm: bcm2835: convert to the irqchip infrastructure   Josh Cartwright
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Josh Cartwright
• [PATCH] arm: zynq: add system level control register manager   Josh Cartwright
• [PATCH v2 3/5] ARM: zynq: use zynq clk bindings   Josh Cartwright
• [PATCH v2 0/5] zynq clk support   Josh Cartwright
• [PATCH] arm: zynq: add system level control register manager   Josh Cartwright
• [PATCH] arm: zynq: add system level control register manager   Josh Cartwright
• [PATCH] arm: zynq: add system level control register manager   Josh Cartwright
• [PATCH v2 2/5] clk: Add support for fundamental zynq clks   Josh Cartwright
• [PATCH v3] clk: Add support for fundamental zynq clks   Josh Cartwright
• [PATCH 1/3] ARM: zynq: remove TTC early mapping   Josh Cartwright
• [PATCH 2/3] ARM: zynq: make use of debug_ll_io_init()   Josh Cartwright
• [PATCH 3/3] ARM: zynq: add support for ARCH_MULTIPLATFORM   Josh Cartwright
• [PATCH 0/3] ARM: zynq: ARCH_MULTIPLATFORM support   Josh Cartwright
• [PATCH V2 2/2] ARM: tegra: move timer.c to drivers/clocksource/   Josh Cartwright
• [PATCH] ARM: zynq: Remove all unused mach headers   Josh Cartwright
• [PATCH V3 1/2] clocksource: add common of_clksrc_init() function   Josh Cartwright
• [PATCH] ARM: sunxi: add missing include for mdelay()   Josh Cartwright
• [RFC] arm: memtest   Matthieu Castet
• [PATCH 0/4] pm: Add power off control   AnilKumar Ch
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   AnilKumar Ch
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar Ch
• [PATCH 3/4] ARM: dts: AM33XX: Set pmic-shutdown-controller for BeagleBone   AnilKumar Ch
• [PATCH 4/4] ARM: dts: AM33XX: Enable system power off control in am335x-bone   AnilKumar Ch
• [PATCH 00/10] ARM: dts: AM33XX: Add device tree data   AnilKumar Ch
• [PATCH 01/10] ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM   AnilKumar Ch
• [PATCH 02/10] ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm   AnilKumar Ch
• [PATCH 03/10] ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM   AnilKumar Ch
• [PATCH 04/10] ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm   AnilKumar Ch
• [PATCH 05/10] ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE   AnilKumar Ch
• [PATCH 06/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone   AnilKumar Ch
• [PATCH 07/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK   AnilKumar Ch
• [PATCH 08/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk   AnilKumar Ch
• [PATCH 09/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK   AnilKumar Ch
• [PATCH 10/10] ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk   AnilKumar Ch
• [PATCH RESEND 00/10] ARM: dts: AM33XX: Add device tree data   AnilKumar Ch
• [PATCH RESEND 01/10] ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM   AnilKumar Ch
• [PATCH RESEND 02/10] ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm   AnilKumar Ch
• [PATCH RESEND 03/10] ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM   AnilKumar Ch
• [PATCH RESEND 04/10] ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm   AnilKumar Ch
• [PATCH RESEND 05/10] ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE   AnilKumar Ch
• [PATCH RESEND 06/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone   AnilKumar Ch
• [PATCH RESEND 07/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK   AnilKumar Ch
• [PATCH RESEND 08/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk   AnilKumar Ch
• [PATCH RESEND 09/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK   AnilKumar Ch
• [PATCH RESEND 10/10] ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk   AnilKumar Ch
• [PATCH 0/3] can: Add D_CAN raminit support to am335x-evm   AnilKumar Ch
• [PATCH 1/3] can: c_can: Add d_can raminit support   AnilKumar Ch
• [PATCH 2/3] ARM: dts: AM33XX: Add d_can instances to aliases   AnilKumar Ch
• [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node   AnilKumar Ch
• [PATCH v2 0/4] pm: Add power off control   AnilKumar Ch
• [PATCH v2 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   AnilKumar Ch
• [PATCH v2 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar Ch
• [PATCH v2 3/4] ARM: dts: AM33XX: Set pmic-shutdown-controller for BeagleBone   AnilKumar Ch
• [PATCH v2 4/4] ARM: dts: AM33XX: Enable system power off control in am335x-bone   AnilKumar Ch
• [PATCH v3 0/5] pm: Add power off control   AnilKumar Ch
• [PATCH v3 1/5] rtc: OMAP: Add system pm_power_off to rtc driver   AnilKumar Ch
• [PATCH v3 2/5] mfd: tps65217: Set PMIC to shutdown on PWR_EN toggle   AnilKumar Ch
• [PATCH v3 3/5] ARM: dts: AM33XX: Set pmic-shutdown-controller for BeagleBone   AnilKumar Ch
• [PATCH v3 4/5] ARM: dts: AM33XX: Enable system power off control in am335x-bone   AnilKumar Ch
• [PATCH v3 5/5] ARM: OMAP2+: omap2plus_defconfig: Enable RTC support   AnilKumar Ch
• [PATCH v2] can: c_can: Add d_can raminit support   AnilKumar Ch
• [PATCH 0/7] ARM: OMAP2+: AM33XX: Enable few drivers in omap2plus_defconfig   AnilKumar Ch
• [PATCH 1/7] ARM: OMAP2+: omap2plus_defconfig: Enable tps65910 PMIC   AnilKumar Ch
• [PATCH 2/7] ARM: OMAP2+: omap2plus_defconfig: Enable lis3lv02d accelerometer   AnilKumar Ch
• [PATCH 3/7] ARM: OMAP2+: omap2plus_defconfig: Enable tsl2550 ambient light sensor   AnilKumar Ch
• [PATCH 4/7] ARM: OMAP2+: omap2plus_defconfig: Enable matrix keypad driver   AnilKumar Ch
• [PATCH 5/7] ARM: OMAP2+: omap2plus_defconfig: Enable tmp275 sensor   AnilKumar Ch
• [PATCH 6/7] ARM: OMAP2+: omap2plus_defconfig: Enable leds-gpio driver   AnilKumar Ch
• [PATCH 7/7] ARM: OMAP2+: omap2plus_defconfig: Enable DCAN controller   AnilKumar Ch
• [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes   AnilKumar Ch
• [PATCH 1/3] i2c: exynos5: add High Speed I2C controller driver   Naveen Krishna Ch
• [PATCH] Documentation: correct argument list for of_platform_populate correction to match of_platform.h prototype   Chaiken, Alison
• No subject   Sammy Chan
• arch-vt8500 and wm8850 support   Alexey Charkov
• [PATCH] spi: s3c64xx: Add fix for crash in spi suspend/resume   Naveen Krishna Chatradhi
• [PATCH] i2c: samsung: resume race fix   Naveen Krishna Chatradhi
• [PATCH 0/4] i2c-s3c2410: Fix a bug and optimize code   Naveen Krishna Chatradhi
• [PATCH 1/4] i2c-s3c2410: grab adapter lock while changing i2c clock   Naveen Krishna Chatradhi
• [PATCH 2/4] i2c-s3c2410: do not generate STOP for QUIRK_HDMIPHY   Naveen Krishna Chatradhi
• [PATCH 3/4] i2c-s3c2410: use exponential back off while polling for bus idle   Naveen Krishna Chatradhi
• [PATCH 4/4] i2c-s3c2410: do not special case HDMIPHY stuck bus detection   Naveen Krishna Chatradhi
• [PATCH 0/3] i2c: Add High speed I2C controller driver for Exynos5   Naveen Krishna Chatradhi
• [PATCH 1/3] i2c: exynos5: add High Speed I2C controller driver   Naveen Krishna Chatradhi
• [PATCH 2/3] ARM: exynos5: Add gate clocks for HS-I2C   Naveen Krishna Chatradhi
• [PATCH 3/3] arm: exynos5: Add HS-I2C device tree platform information   Naveen Krishna Chatradhi
• [PATCH 0/2] i2c-s3c2410: Implementation bus arbitration support   Naveen Krishna Chatradhi
• [PATCH 1/2] i2c-s3c2410: Leave the bus disabled unless it is in use   Naveen Krishna Chatradhi
• [PATCH 2/2] i2c-s3c2410: Add bus arbitration implementation   Naveen Krishna Chatradhi
• DMABUF V4L2 patches got merged   Mauro Carvalho Chehab
• [PATCH net-next 2/2] cpsw: fix leaking IO mappings   Cyril Chemparathy
• [PATCH v4 05/14] KVM: ARM: Hypervisor inititalization   Cyril Chemparathy
• [PATCH v3 0/7] support other fsl SoCs with usbmisc + small fixes   Peter Chen
• [PATCH v3 3/7] usb: chipidea: usbmisc: fix a potential race condition   Peter Chen
• [PATCH v3 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Peter Chen
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support   Peter Chen
• [PATCH v3 7/7] usb: chipidea: usbmisc: add post handling and errata fix for mx25   Peter Chen
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support   Peter Chen
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support   Peter Chen
• [PATCH v3 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Peter Chen
• [PATCH v3 0/7] Add fully tested id switch and vbus connect detect support for Chipidea   Peter Chen
• [PATCH v3 1/7] Revert "USB: chipidea: add vbus detect for udc"   Peter Chen
• [PATCH v3 2/7] usb: chipidea: add otg file   Peter Chen
• [PATCH v3 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect   Peter Chen
• [PATCH v3 4/7] usb: chipidea: consolidate ci_role_driver's API for both roles   Peter Chen
• [PATCH v3 5/7] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state   Peter Chen
• [PATCH v3 6/7] usb: chipidea: udc: retire the flag CI13_PULLUP_ON_VBUS   Peter Chen
• [PATCH v3 7/7] usb: chipidea: imx: add internal vbus regulator control   Peter Chen
• [PATCH 2/9] usb: chipidea: ci13xxx_imx: add 2nd and 3rd clock to support imx5x and newer   Peter Chen
• [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Peter Chen
• [PATCH 5/9] usb: add phy connection by phy-mode   Peter Chen
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Peter Chen
• [PATCH 2/9] usb: chipidea: ci13xxx_imx: add 2nd and 3rd clock to support imx5x and newer   Peter Chen
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Peter Chen
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Peter Chen
• [PATCH 4/4] iommu/exynos: enhancements of System MMU driver with DT   KyongHo Cho
• [PATCH v2 0/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   KyongHo Cho
• [PATCH v2 09/12] iommu/exynos: add supoort for runtime pm and suspend/resume   KyongHo Cho
• [PATCH v3 02/12] ARM: EXYNOS: Add clk_ops for gating clocks of System MMU   KyongHo Cho
• [PATCH v3 01/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   KyongHo Cho
• [PATCH] ARM: EXYNOS: Add support for ORIGEN4QUAD board   Kyuho Choi
• [PATCH] ARM: EXYNOS: Add support for ORIGEN4QUAD board   Kyuho Choi
• [PATCH] ARM: dts: add initial dts file for ORIGEN4QUAD   Kyuho Choi
• [PATCH] ARM: dts: add initial dts file for ORIGEN4QUAD   Kyuho Choi
• [PATCH v2 0/8] enable support for AMBA drivers under x86   Davide Ciminaghi
• [PATCH 1/8] DMA: PL330: use prefix in reg names to build under x86   Davide Ciminaghi
• [PATCH 2/8] gpio: pl061 depends on ARM   Davide Ciminaghi
• [PATCH 3/8] pl080.h: moved from arm/include/asm/hardware to include/linux/amba/   Davide Ciminaghi
• [PATCH 4/8] watchdog: sp805_wdt depends on ARM   Davide Ciminaghi
• [PATCH 5/8] mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep   Davide Ciminaghi
• [PATCH 6/8] mmc: use the new <linux/sizes.h>   Davide Ciminaghi
• [PATCH 7/8] drivers/amba: add support for a PCI bridge   Davide Ciminaghi
• [PATCH 8/8] x86: add CONFIG_ARM_AMBA, selected by STA2X11   Davide Ciminaghi
• [PATCH 1/8] DMA: PL330: use prefix in reg names to build under x86   Davide Ciminaghi
• [PATCH 3/8 v3] pl080.h: moved from arm/include/asm/hardware to include/linux/amba/   Davide Ciminaghi
• [PATCH 1/8 v3] DMA: PL330: use prefix in reg names to build under x86   Davide Ciminaghi
• [PATCH 1/8 v3] DMA: PL330: use prefix in reg names to build under x86   Davide Ciminaghi
• [PATCH 5/8] mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep   Davide Ciminaghi
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH] ARM: add get_user() support for 8 byte types   Rob Clark
• [PATCH 7/8] serial: xilinx_uartps: get clock rate info from dts   Lars-Peter Clausen
• [PATCH 5/8] ARM: zynq: add COMMON_CLK support   Lars-Peter Clausen
• [PATCH 5/8] ARM: zynq: add COMMON_CLK support   Lars-Peter Clausen
• S-o-b for 48efdd2 "Add a pm_power_off function that resets us, ..."   Dominic Cobley
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Richard Cochran
• [PATCH 0/4] Support the MX6 FEC as a PTP hardware clock   Richard Cochran
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Richard Cochran
• [PATCH 4/4] FEC: Add time stamping code and a PTP hardware clock   Richard Cochran
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Richard Cochran
• [PATCH net-next 0/2] cpsw: fix resource leak for v3.8   Richard Cochran
• [PATCH net-next 1/2] cpsw: rename register banks to match the reference manual, part 2   Richard Cochran
• [PATCH net-next 2/2] cpsw: fix leaking IO mappings   Richard Cochran
• [PATCH RFC net-next 0/1] Simplify the CPSW DT   Richard Cochran
• [PATCH RFC net-next 1/1] cpsw: simplify the setup of the register pointers   Richard Cochran
• [PATCH net-next 2/2] cpsw: fix leaking IO mappings   Richard Cochran
• [PATCH 0/7] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver   Richard Cochran
• OMAP baseline test results for v3.7-rc5   Richard Cochran
• [PATCH net-next] cpts: add missing kconfig dependency   Richard Cochran
• [PATCH 1/1] net: cpts: fix for build break after ARM SoC integration   Richard Cochran
• [PATCH 1/1] net: ethernet: cpsw: fix build warnings for CPSW when CPTS not selected   Richard Cochran
• [PATCH v5 4/5] iommu/omap: adapt to runtime pm   Felipe Contreras
• [PATCH v5 0/4] arch/arm: support seccomp   Kees Cook
• [PATCH 1/4] arch/arm: add syscall_get_arch   Kees Cook
• [PATCH 2/4] arch/arm: move secure_computing into trace   Kees Cook
• [PATCH 3/4] arch/arm: allow a scno of -1 to not cause a SIGILL   Kees Cook
• [PATCH 4/4] arch/arm: select HAVE_ARCH_SECCOMP_FILTER   Kees Cook
• [PATCH v5 0/4] arch/arm: support seccomp   Kees Cook
• [PATCH v5 0/4] arch/arm: support seccomp   Kees Cook
• [PATCH v5 0/4] arch/arm: support seccomp   Kees Cook
• Possible regression in 3.7-rc3 on Marvell Kirkwood   Josh Coombs
• Possible regression in 3.7-rc3 on Marvell Kirkwood   Josh Coombs
• Possible regression in 3.7-rc3 on Marvell Kirkwood   Josh Coombs
• Possible regression in 3.7-rc3 on Marvell Kirkwood   Josh Coombs
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Josh Coombs
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Josh Coombs
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Josh Coombs
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Josh Coombs
• [RFC v2 1/1] RTL8712 alignment bug in 3.6 and up on ARMV5   Josh Coombs
• [PATCH] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Jason Cooper
• arm: mvebu: Pull request for 'marvell-boards' branch   Jason Cooper
• [PATCH v2] ARM: Dove: update defconfig   Jason Cooper
• [PATCH v2 0/3] GPIO driver to turn power off   Jason Cooper
• [PATCH 1/1] ARM: kirkwood: Add support for the MPL CEC4   Jason Cooper
• [PATCH 1/1] ARM: kirkwood: Add support for the MPL CEC4   Jason Cooper
• Final call for 3.8 arm-soc patches   Jason Cooper
• [PATCH] Dove: Fix irq_to_pmu()   Jason Cooper
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Jason Cooper
• kirkwood i2s lockup, was: Re: [PATCH] Dove: Fix irq_to_pmu()   Jason Cooper
• [PATCH] Dove: Fix irq_to_pmu()   Jason Cooper
• [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Jason Cooper
• [PATCH] ARM: Orion: Remove redundent init_dma_coherent_pool_size()   Jason Cooper
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Jason Cooper
• [PATCH v2 2/2] ARM: Kirkwood: Convert XOR instantiation to DT.   Jason Cooper
• [PATCH v2 2/2] ARM: Kirkwood: Convert XOR instantiation to DT.   Jason Cooper
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Jason Cooper
• [PATCH v5 3/8] watchdog: orion_wdt: add timeout-sec property binding   Jason Cooper
• [PATCH] arm: orion5x: convert Netgear WNR854T to device tree   Jason Cooper
• [PATCH] arm: orion5x: convert Netgear WNR854T to device tree   Jason Cooper
• [PATCH] arm: orion5x: convert Netgear WNR854T to device tree   Jason Cooper
• [PATCH v5 3/8] watchdog: orion_wdt: add timeout-sec property binding   Jason Cooper
• [PATCH v5 7/8] watchdog: orion_wdt: move the min_timeout initialization   Jason Cooper
• [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Jason Cooper
• [PATCH 0/4] Dove pinctrl fixes and DT enabling   Jason Cooper
• [PATCH] Dove: Attempt to fix PMU/RTC interrupts   Jason Cooper
• [PATCH] ARM: Kirkwood: Update PCI-E fixup   Jason Cooper
• [PATCH] ARM: Kirkwood: Support basic hotplug for PCI-E   Jason Cooper
• [PATCH] ARM: Kirkwood: Support basic hotplug for PCI-E   Jason Cooper
• [PATCH] ARM: Kirkwood: Add SPI_CHPA and SPI_CPOL support to spi-orion   Jason Cooper
• [PATCH] arm: orion5x: convert Netgear WNR854T to device tree   Jason Cooper
• [PATCH] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Jason Cooper
• [GIT PULL] ARM: ixp4xx: fixes for v3.7   Jason Cooper
• [PATCH] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Jason Cooper
• [PATCH 0/4] Dove pinctrl fixes and DT enabling   Jason Cooper
• [PATCH 1/3] ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6   Jason Cooper
• [PATCH 3/4] ARM: Dove: Convert to DT GPIO and pinctrl   Jason Cooper
• [GIT PULL 1/5] ARM: orion: fixes for v3.8   Jason Cooper
• [GIT PULL 2/5] ARM: orion: cleanup for v3.8   Jason Cooper
• [GIT PULL 3/5] ARM: orion: boards for v3.8   Jason Cooper
• [GIT PULL 4/5] ARM: orion: dt for v3.8   Jason Cooper
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Jason Cooper
• [GIT PULL 1/5] ARM: orion: fixes for *v3.7*   Jason Cooper
• [PATCH 3/4] ARM: Dove: Convert to DT GPIO and pinctrl   Jason Cooper
• [PATCH 3/4] ARM: Dove: Convert to DT GPIO and pinctrl   Jason Cooper
• [PATCH 3/4] ARM: Dove: Convert to DT GPIO and pinctrl   Jason Cooper
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Jason Cooper
• [GIT PULL 4/5] ARM: orion: dt for v3.8   Jason Cooper
• [GIT PULL 3/5] ARM: orion: boards for v3.8   Jason Cooper
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Jason Cooper
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Jason Cooper
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Jason Cooper
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Jason Cooper
• [GIT PULL] ARM: mvebu: cache-l2x0 for v3.8   Jason Cooper
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Jason Cooper
• [PATCH] ARM: tegra: seaboard: enable internal LCD   Alex Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alex Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alex Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alex Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alex Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alex Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alex Courbot
• [PATCHv9 0/3] Runtime Interpreted Power Sequences   Alexandre Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alexandre Courbot
• [PATCHv9 2/3] pwm_backlight: use power sequences   Alexandre Courbot
• [PATCHv9 3/3] Take maintainership of power sequences   Alexandre Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alexandre Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alexandre Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alexandre Courbot
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Alexandre Courbot
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Cousson, Benoit
• [PATCH v3] ARM: dts: AM33xx: Add SPI node   Benoit Cousson
• [PATCH 0/3] ARM: dts: OMAP4/5 device-tree timer updates   Benoit Cousson
• [GIT PULL] ARM: OMAP: DTS for 3.8   Benoit Cousson
• [PATCH v2 1/2] ARM: OMAP: hwmod: Add possibility to count hwmod resources based on type   Cousson, Benoit
• [PATCH V2 0/3] ARM: dts: omap5: EMIF and LPDDR2 device tree data   Benoit Cousson
• [PATCH V2 2/3] ARM: dts: omap5: EMIF device tree data for OMAP5 boards   Benoit Cousson
• [PATCH V2 3/3] ARM: dts: omap5-evm: LPDDR2 memory device details for EVM   Benoit Cousson
• [PATCH V2 0/3] ARM: dts: omap5: EMIF and LPDDR2 device tree data   Benoit Cousson
• [PATCH] ARM: dts: AM33XX: Add usbss node   Benoit Cousson
• [PATCH v2 2/2] ARM: OMAP: omap_device: Correct resource handling for DT boot   Benoit Cousson
• [PATCH 00/10] ARM: dts: AM33XX: Add device tree data   Benoit Cousson
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   Benoit Cousson
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   Benoit Cousson
• [PATCHv3 8/8] i2c: omap: cleanup the sysc write   Cousson, Benoit
• [PATCH 1/6] ARM/dts: omap4-panda: Add pinmux configuration for HDMI   Benoit Cousson
• [PATCH V3 0/3] ARM: dts: omap5: EMIF and LPDDR2 device tree data   Benoit Cousson
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Benoit Cousson
• [PATCH RESEND 00/10] ARM: dts: AM33XX: Add device tree data   Benoit Cousson
• [PATCH v2] ARM: dts: AM33XX: Add usbss node   Benoit Cousson
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   Benoit Cousson
• [PATCH 1/6] ARM/dts: omap4-panda: Add pinmux configuration for HDMI   Benoit Cousson
• [PATCH 2/6] ARM/dts: omap4-sdp: Add pinmux configuration for HDMI   Benoit Cousson
• [PATCH 0/6] OMAPDSS: enable DSS for Panda & SDP with devtree   Benoit Cousson
• [PATCH V4 0/7] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver   Benoit Cousson
• [GIT PULL] ARM: OMAP: DTS for 3.8 part 2   Benoit Cousson
• [PATCH 12/11] ARM: OMAP: Fix relative includes for fpga.h   Benoit Cousson
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Benoit Cousson
• [PATCH 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   Benoit Cousson
• [PATCH v3 03/10] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Benoit Cousson
• [PATCH] ARM: backtrace: avoid crash on large invalid fp value   Colin Cross
• [PATCH] ARM: backtrace: avoid crash on large invalid fp value   Colin Cross
• [PATCH] ARM: backtrace: avoid crash on large invalid fp value   Colin Cross
• [PATCH v2 0/3] ARM: enable dumping stacks for CONFIG_SMP   Colin Cross
• [PATCH v2 1/3] ARM: stacktrace: harden FP stacktraces against invalid stacks   Colin Cross
• [PATCH v2 2/3] ARM: unwind: harden unwinding against invalid stacks   Colin Cross
• [PATCH v2 3/3] ARM: stacktrace: enable save_stack_trace_tsk for CONFIG_SMP   Colin Cross
• [PATCH] arm: zynq: add system level control register manager   Peter Crosthwaite
• [PATCH 0/2] i2c: omap: revision register updates   Shubhrajyoti D
• [PATCH 1/2] i2c: omap: Fix the revision register read   Shubhrajyoti D
• [PATCH 2/2] i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207   Shubhrajyoti D
• [PATCHv2 0/7] i2c: omap: updates   Shubhrajyoti D
• [PATCHv2 1/7] i2c: omap: Fix the revision register read   Shubhrajyoti D
• [PATCHv2 2/7] i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207   Shubhrajyoti D
• [PATCHv2 3/7] i2c: omap: remove the dtrev   Shubhrajyoti D
• [PATCHv2 4/7] ARM: i2c: omap: Remove the i207 errata flag   Shubhrajyoti D
• [PATCHv2 5/7] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti D
• [PATCHv2 6/7] i2c: omap: make reset a seperate function   Shubhrajyoti D
• [PATCHv2 7/7] i2c: omap: Restore i2c context always   Shubhrajyoti D
• [PATCHv3 0/7] i2c: omap: updates   Shubhrajyoti D
• [PATCHv3 1/8] i2c: omap: Fix the revision register read   Shubhrajyoti D
• [PATCHv3 2/8] i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207   Shubhrajyoti D
• [PATCHv3 3/8] i2c: omap: remove the dtrev   Shubhrajyoti D
• [PATCHv3 4/8] ARM: i2c: omap: Remove the i207 errata flag   Shubhrajyoti D
• [PATCHv3 5/8] i2c: omap: re-factor omap_i2c_init function   Shubhrajyoti D
• [PATCHv3 6/8] i2c: omap: make reset a seperate function   Shubhrajyoti D
• [PATCHv3 7/8] i2c: omap: Restore i2c context always   Shubhrajyoti D
• [PATCHv3 8/8] i2c: omap: cleanup the sysc write   Shubhrajyoti D
• [PATCH] i2c: omap: Move the remove constraint   Shubhrajyoti D
• [PATCHv2] i2c: omap: Move the remove constraint   Shubhrajyoti D
• [PATCHv3] i2c: omap: Move the remove constraint   Shubhrajyoti D
• [PATCH] i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag   Shubhrajyoti D
• [PATCH] i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag   Shubhrajyoti D
• [PATCHv2] i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag   Shubhrajyoti D
• [PATCH] Input: omap4-keypad: Remove the OMAP4_KBD_SYSCONFIG and OMAP4_KBD_SYSSTATUS   Shubhrajyoti D
• [PATCH RFC] i2c: omap: Remove the OMAP_I2C_IP_VERSION_*   Shubhrajyoti D
• [kvmarm] [PATCH v3 01/13] KVM: ARM: Introduce KVM_SET_DEVICE_ADDRESS ioctl   Christoffer Dall
• [PATCH v4 00/14] KVM/ARM Implementation   Christoffer Dall
• [PATCH v4 01/14] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH v4 02/14] ARM: Section based HYP idmap   Christoffer Dall
• [PATCH v4 03/14] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v4 04/14] KVM: ARM: Initial skeleton to compile KVM support   Christoffer Dall
• [PATCH v4 05/14] KVM: ARM: Hypervisor inititalization   Christoffer Dall
• [PATCH v4 06/14] KVM: ARM: Memory virtualization setup   Christoffer Dall
• [PATCH v4 07/14] KVM: ARM: Inject IRQs and FIQs from userspace   Christoffer Dall
• [PATCH v4 08/14] KVM: ARM: World-switch implementation   Christoffer Dall
• [PATCH v4 09/14] KVM: ARM: Emulation framework and CP15 emulation   Christoffer Dall
• [PATCH v4 10/14] KVM: ARM: User space API for getting/setting co-proc registers   Christoffer Dall
• [PATCH v4 11/14] KVM: ARM: Demux CCSIDR in the userspace API   Christoffer Dall
• [PATCH v4 12/14] KVM: ARM: VFP userspace interface   Christoffer Dall
• [PATCH v4 13/14] KVM: ARM: Handle guest faults in KVM   Christoffer Dall
• [PATCH v4 14/14] KVM: ARM: Handle I/O aborts   Christoffer Dall
• [PATCH v4 00/13] KVM/ARM vGIC support   Christoffer Dall
• [PATCH v4 01/13] KVM: ARM: Introduce KVM_SET_DEVICE_ADDRESS ioctl   Christoffer Dall
• [PATCH v4 02/13] ARM: KVM: Keep track of currently running vcpus   Christoffer Dall
• [PATCH v4 03/13] ARM: KVM: Initial VGIC infrastructure support   Christoffer Dall
• [PATCH v4 04/13] ARM: KVM: Initial VGIC MMIO support code   Christoffer Dall
• [PATCH v4 05/13] ARM: KVM: VGIC accept vcpu and dist base addresses from user space   Christoffer Dall
• [PATCH v4 06/13] ARM: KVM: VGIC distributor handling   Christoffer Dall
• [PATCH v4 07/13] ARM: KVM: VGIC virtual CPU interface management   Christoffer Dall
• [PATCH v4 08/13] ARM: KVM: vgic: retire queued, disabled interrupts   Christoffer Dall
• [PATCH v4 09/13] ARM: KVM: VGIC interrupt injection   Christoffer Dall
• [PATCH v4 10/13] ARM: KVM: VGIC control interface world switch   Christoffer Dall
• [PATCH v4 11/13] ARM: KVM: VGIC initialisation code   Christoffer Dall
• [PATCH v4 12/13] ARM: KVM: vgic: reduce the number of vcpu kick   Christoffer Dall
• [PATCH v4 13/13] ARM: KVM: Add VGIC configuration option   Christoffer Dall
• [PATCH v4 0/5] KVM/ARM Architected Timers support   Christoffer Dall
• [PATCH v4 1/5] ARM: arch_timers: switch to physical timers if HYP mode is available   Christoffer Dall
• [PATCH v4 2/5] ARM: KVM: arch_timers: Add minimal infrastructure   Christoffer Dall
• [PATCH v4 3/5] ARM: KVM: arch_timers: Add guest timer core support   Christoffer Dall
• [PATCH v4 4/5] ARM: KVM: arch_timers: Add timer world switch   Christoffer Dall
• [PATCH v4 5/5] ARM: KVM: arch_timers: Wire the init code and config option   Christoffer Dall
• [PATCH v4 04/13] ARM: KVM: Initial VGIC MMIO support code   Christoffer Dall
• [PATCH v4 05/13] ARM: KVM: VGIC accept vcpu and dist base addresses from user space   Christoffer Dall
• [PATCH v4 06/13] ARM: KVM: VGIC distributor handling   Christoffer Dall
• [kvmarm] [PATCH v3 06/14] KVM: ARM: Memory virtualization setup   Christoffer Dall
• [PATCH v4 07/14] KVM: ARM: Inject IRQs and FIQs from userspace   Christoffer Dall
• [PATCH v4 06/14] KVM: ARM: Memory virtualization setup   Christoffer Dall
• [PATCH v4 07/14] KVM: ARM: Inject IRQs and FIQs from userspace   Christoffer Dall
• [PATCH v4 01/14] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH v4 02/14] ARM: Section based HYP idmap   Christoffer Dall
• [PATCH] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v2] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v4 03/14] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v4 04/14] KVM: ARM: Initial skeleton to compile KVM support   Christoffer Dall
• [PATCH v4 05/14] KVM: ARM: Hypervisor inititalization   Christoffer Dall
• [PATCH v4 07/14] KVM: ARM: Inject IRQs and FIQs from userspace   Christoffer Dall
• [PATCH v4 08/14] KVM: ARM: World-switch implementation   Christoffer Dall
• [PATCH v4 10/14] KVM: ARM: User space API for getting/setting co-proc registers   Christoffer Dall
• [PATCH v4 11/14] KVM: ARM: Demux CCSIDR in the userspace API   Christoffer Dall
• [PATCH v3] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v4 03/14] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v4] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v4 01/14] ARM: Add page table and page defines needed by KVM   Christoffer Dall
• [PATCH v4 02/14] ARM: Section based HYP idmap   Christoffer Dall
• [PATCH v4 08/14] KVM: ARM: World-switch implementation   Christoffer Dall
• [PATCH v4 08/14] KVM: ARM: World-switch implementation   Christoffer Dall
• [PATCH v3] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v5] ARM: Factor out cpuid implementor and part number   Christoffer Dall
• [PATCH v4 09/14] KVM: ARM: Emulation framework and CP15 emulation   Christoffer Dall
• [PATCH v4 13/14] KVM: ARM: Handle guest faults in KVM   Christoffer Dall
• [PATCH v4 2/5] ARM: KVM: arch_timers: Add minimal infrastructure   Christoffer Dall
• [PATCH v4 02/13] ARM: KVM: Keep track of currently running vcpus   Christoffer Dall
• [PATCH v4 3/5] ARM: KVM: arch_timers: Add guest timer core support   Christoffer Dall
• [PATCH v4 4/5] ARM: KVM: arch_timers: Add timer world switch   Christoffer Dall
• [PATCH v4 5/5] ARM: KVM: arch_timers: Wire the init code and config option   Christoffer Dall
• [PATCH v4 03/13] ARM: KVM: Initial VGIC infrastructure support   Christoffer Dall
• [PATCH v4 05/13] ARM: KVM: VGIC accept vcpu and dist base addresses from user space   Christoffer Dall
• [PATCH v5 07/15] ARM: mach-shmobile: Add DT table of INTC for sh7372   Magnus Damm
• [PATCH 1/7] mmc: sh-mmcif: provide default allowed voltage   Magnus Damm
• [PATCH 6/7] ARM: mach-shmobile: sh73a0: Minimal setup using DT   Magnus Damm
• idle_sleeptime calculation for hotplugged cpu   Taniya Das
• ARM: idle sleep time for hotplugged cpu   Taniya Das
• [PATCH 2/2] i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207   Shubhrajyoti Datta
• [PATCH 1/2] i2c: omap: Fix the revision register read   Shubhrajyoti Datta
• [PATCHv2 1/7] i2c: omap: Fix the revision register read   Shubhrajyoti Datta
• [PATCHv2 1/7] i2c: omap: Fix the revision register read   Shubhrajyoti Datta
• [PATCHv3 8/8] i2c: omap: cleanup the sysc write   Shubhrajyoti Datta
• OMAP baseline test results for v3.7-rc1   Shubhrajyoti Datta
• [PATCH] Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints"   Shubhrajyoti Datta
• [PATCHv3 0/7] i2c: omap: updates   Shubhrajyoti Datta
• [PATCHv2] i2c: omap: Move the remove constraint   Shubhrajyoti Datta
• [PATCH 06/17] spi/atmel_spi: add flag to controller data for lock operations   Shubhrajyoti Datta
• [PATCHv3] i2c: omap: Move the remove constraint   Shubhrajyoti Datta
• [PATCH 065/493] i2c: remove use of __devexit_p   Shubhrajyoti Datta
• [PATCH] i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag   Shubhrajyoti Datta
• [PATCH] i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag   Shubhrajyoti Datta
• [PATCH RFC] i2c: omap: Remove the OMAP_I2C_IP_VERSION_*   Shubhrajyoti Datta
• [PATCH] Input: omap4-keypad: Remove the OMAP4_KBD_SYSCONFIG and OMAP4_KBD_SYSSTATUS   Shubhrajyoti Datta
• [PATCH] Input: omap4-keypad: Remove the OMAP4_KBD_SYSCONFIG and OMAP4_KBD_SYSSTATUS   Shubhrajyoti Datta
• [PATCH] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH v2] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH v2] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH v2] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH v2] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH v2] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH V3] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH V3] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH V4] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH V3] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH V3] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH V5] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH V3] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH V6] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH V5] Add support for generic BCM SoC chipsets   Christian Daudt
• [PATCH 1/1] ARM: oprofile: add A5/A7/A15 entries in op_perf_name   Will Deacon
• gic_set_affinity   Will Deacon
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Will Deacon
• [PATCH V2 2/5] arm: mvebu: Added initial support for power managmement service unit   Will Deacon
• Building for MMU-less vexpress targets   Will Deacon
• Building for MMU-less vexpress targets   Will Deacon
• Building for MMU-less vexpress targets   Will Deacon
• Building for MMU-less vexpress targets   Will Deacon
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Will Deacon
• [RFC PATCH 1/4] ARM: kernel: add device tree init map function   Will Deacon
• [RFC PATCH 2/4] ARM: kernel: add cpu logical map DT init in setup_arch   Will Deacon
• [RFC PATCH 3/4] ARM: kernel: add logical mappings look-up   Will Deacon
• [RFC PATCH 4/4] ARM: gic: use a private mapping for CPU target interfaces   Will Deacon
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Will Deacon
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Will Deacon
• Building for MMU-less vexpress targets   Will Deacon
• [RFC PATCH 4/4] ARM: gic: use a private mapping for CPU target interfaces   Will Deacon
• [RFC PATCH 1/4] ARM: kernel: add device tree init map function   Will Deacon
• [RFC PATCH 1/4] ARM: kernel: add device tree init map function   Will Deacon
• gic_set_affinity   Will Deacon
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Will Deacon
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Will Deacon
• [PATCH v2 2/5] ARM: kernel: add device tree init map function   Will Deacon
• [PATCH v2 1/5] ARM: kernel: smp_setup_processor_id() updates   Will Deacon
• [GIT PULL] perf updates for 3.8   Will Deacon
• [GIT PULL] hw-breakpoint updates for 3.8   Will Deacon
• [GIT PULL] prot-none fixes for 3.8   Will Deacon
• [GIT PULL] New ASID allocator for 3.8   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH] ARM: add get_user() support for 8 byte types   Will Deacon
• [PATCH] Set bit 22 in the PL310 (cache controller) AuxCtlr register   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH] ARM: add get_user() support for 8 byte types   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Will Deacon
• [PATCH V2 4/5] arm: mm: Added support for PJ4B cpu and init routines   Will Deacon
• [PATCH V2 2/5] arm: mvebu: Added initial support for power managmement service unit   Will Deacon
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Will Deacon
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Will Deacon
• [PATCH v5 0/4] arch/arm: support seccomp   Will Deacon
• [PATCH v3 1/5] ARM: kernel: smp_setup_processor_id() updates   Will Deacon
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Will Deacon
• [PATCH v5 0/4] arch/arm: support seccomp   Will Deacon
• [RFC PATCH 3.7.0-rc4] ARM:smp: introduce smp_notify_cpu_stop to fix kexec smp case   Will Deacon
• [PATCH] ARM: cti: fix manipulation of debug lock registers   Will Deacon
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Will Deacon
• [PATCH V2 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Will Deacon
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Will Deacon
• [RFC PATCH 3.7.0-rc4] ARM:smp: introduce smp_notify_cpu_stop to fix kexec smp case   Will Deacon
• [RFC PATCH 3.7.0-rc4] ARM:smp: introduce smp_notify_cpu_stop to fix kexec smp case   Will Deacon
• [PATCH v4 1/7] ARM: kernel: enhance MPIDR macro definitions   Will Deacon
• [PATCH v4 2/7] ARM: kernel: update topology to use new MPIDR macros   Will Deacon
• [PATCH v4 3/7] ARM: kernel: smp_setup_processor_id() updates   Will Deacon
• [PATCH v4 01/14] ARM: Add page table and page defines needed by KVM   Will Deacon
• [PATCH v4 02/14] ARM: Section based HYP idmap   Will Deacon
• [PATCH v4 03/14] ARM: Factor out cpuid implementor and part number   Will Deacon
• [PATCH v4 04/14] KVM: ARM: Initial skeleton to compile KVM support   Will Deacon
• [PATCH v4 05/14] KVM: ARM: Hypervisor inititalization   Will Deacon
• [PATCH v4 06/14] KVM: ARM: Memory virtualization setup   Will Deacon
• [PATCH v4 07/14] KVM: ARM: Inject IRQs and FIQs from userspace   Will Deacon
• [PATCH v4 08/14] KVM: ARM: World-switch implementation   Will Deacon
• [PATCH v4 09/14] KVM: ARM: Emulation framework and CP15 emulation   Will Deacon
• [PATCH v4 10/14] KVM: ARM: User space API for getting/setting co-proc registers   Will Deacon
• [PATCH v4 11/14] KVM: ARM: Demux CCSIDR in the userspace API   Will Deacon
• [PATCH v4 13/14] KVM: ARM: Handle guest faults in KVM   Will Deacon
• [PATCH v4 14/14] KVM: ARM: Handle I/O aborts   Will Deacon
• KEXEC on ARM cortex-a15   Will Deacon
• [PATCH v4 07/14] KVM: ARM: Inject IRQs and FIQs from userspace   Will Deacon
• [PATCH v4 07/14] KVM: ARM: Inject IRQs and FIQs from userspace   Will Deacon
• [PATCH] ARM: cti: fix manipulation of debug lock registers   Will Deacon
• [PATCH 1/1] ARM: oprofile: add A5/A7/A15 entries in op_perf_name   Will Deacon
• KEXEC on ARM cortex-a15   Will Deacon
• [PATCH V4 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Will Deacon
• [PATCH V4 5/5] arm: mvebu: Added SMP support for Armada XP   Will Deacon
• [PATCH 1/1] ARM: oprofile: add A5/A7/A15 entries in op_perf_name   Will Deacon
• [PATCH V4 5/5] arm: mvebu: Added SMP support for Armada XP   Will Deacon
• [PATCH 1/1] ARM: oprofile: add A5/A7/A15 entries in op_perf_name   Will Deacon
• [PATCH V4 5/5] arm: mvebu: Added SMP support for Armada XP   Will Deacon
• KEXEC on ARM cortex-a15   Will Deacon
• [PATCH V5 1/5] arm: mvebu: Added support for coherency fabric in mach-mvebu   Will Deacon
• [PATCH V5 5/5] arm: mvebu: Added SMP support for Armada XP   Will Deacon
• [PATCH V5 5/5] arm: mvebu: Added SMP support for Armada XP   Will Deacon
• [PATCH V5 5/5] arm: mvebu: Added SMP support for Armada XP   Will Deacon
• [PATCH V6 4/5] arm: mm: Add support for PJ4B cpu and init routines   Will Deacon
• [PATCH V6 1/5] arm: mvebu: Add support for coherency fabric in mach-mvebu   Will Deacon
• [PATCH V6 5/5] arm: mvebu: Add SMP support for Armada XP   Will Deacon
• Possible regression in arm/io.h   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH] ARM: sp804: set cpumask to cpu_possible_mask for clock event device   Will Deacon
• [PATCH] ARM: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected   Will Deacon
• [PATCH v4 1/5] ARM: arch_timers: switch to physical timers if HYP mode is available   Will Deacon
• [PATCH v4 2/5] ARM: KVM: arch_timers: Add minimal infrastructure   Will Deacon
• [PATCH v4 3/5] ARM: KVM: arch_timers: Add guest timer core support   Will Deacon
• [PATCH v4 4/5] ARM: KVM: arch_timers: Add timer world switch   Will Deacon
• [PATCH v4 5/5] ARM: KVM: arch_timers: Wire the init code and config option   Will Deacon
• [PATCH v4 3/5] ARM: KVM: arch_timers: Add guest timer core support   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH v4 02/13] ARM: KVM: Keep track of currently running vcpus   Will Deacon
• [PATCH v4 03/13] ARM: KVM: Initial VGIC infrastructure support   Will Deacon
• [PATCH v4 04/13] ARM: KVM: Initial VGIC MMIO support code   Will Deacon
• [PATCH v4 05/13] ARM: KVM: VGIC accept vcpu and dist base addresses from user space   Will Deacon
• [PATCH v4 06/13] ARM: KVM: VGIC distributor handling   Will Deacon
• [PATCH v4 03/13] ARM: KVM: Initial VGIC infrastructure support   Will Deacon
• [PATCH v2] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH v2] ARM: implement optimized percpu variable access   Will Deacon
• [PATCH v4 03/14] ARM: Factor out cpuid implementor and part number   Will Deacon
• [PATCH v4 02/14] ARM: Section based HYP idmap   Will Deacon
• [PATCH v4 01/14] ARM: Add page table and page defines needed by KVM   Will Deacon
• [PATCH v4 08/14] KVM: ARM: World-switch implementation   Will Deacon
• [PATCH v4 08/14] KVM: ARM: World-switch implementation   Will Deacon
• [PATCH 07/10] arm: arch_timer: add arch_counter_enable_user_access   Will Deacon
• [PATCH 09/10] arm64: move from arm_generic to arm_arch_timer   Will Deacon
• [PATCH] i2c: samsung: resume race fix   Jean Delvare
• [PATCH] i2c: at91: fix SMBus quick command   Jean Delvare
• [PATCH 207/493] i2c: remove use of __devinit   Jean Delvare
• [PATCH 207/493] i2c: remove use of __devinit   Jean Delvare
• [PATCH 065/493] i2c: remove use of __devexit_p   Jean Delvare
• [PATCH net-next] macb: Keep driver's speed/duplex in sync with actual NCFGR   Vitalii Demianets
• nfs root not responding?   Wolfgang Denk
• [PATCH 0/3] ARM: tegra: dt: Add entry for tegra20 sflash controller.   Laxman Dewangan
• [PATCH 1/3] ARM: tegra: dts: add sflash controller dt entry   Laxman Dewangan
• [PATCH 2/3] ARM: tegra: Add OF_DEV_AUXDATA for sflash driver in board dt   Laxman Dewangan
• [PATCH 3/3] ARM: config: tegra: enable SFLASH controller driver   Laxman Dewangan
• [PATCH 03/16] mm: check rb_subtree_gap correctness   Hugh Dickins
• [PATCH] ARM: davinci: da8xx_register_spi() should not register SPI board info   Vivien Didelot
• [PATCH 02/15] ARM: OMAP2+: mailbox: Add support for AM33XX   Russ Dill
• [RFC PATCH v7] ARM hibernation / suspend-to-disk   Russ Dill
• [PATCH] Don't mark shared helper functions as inline   Russ Dill
• [PATCH] Don't mark shared helper functions as inline   Russ Dill
• [PATCH 1/1] ARM: tegra: bus_notifier registers IOMMU devices(was: How to specify IOMMU'able devices in DT)   Hiroshi Doyu
• [PATCH 1/1] ARM: tegra: bus_notifier registers IOMMU devices(was: How to specify IOMMU'able devices in DT)   Hiroshi Doyu
• [PATCH 1/1] ARM: tegra: bus_notifier registers IOMMU devices   Hiroshi Doyu
• [PATCH v5 0/4] arch/arm: support seccomp   Will Drewry
• linux-next: Tree for Sept 24 (irqchip)   Randy Dunlap
• [PATCH] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Mike Dunn
• [PATCH] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Mike Dunn
• [PATCH v2] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Mike Dunn
• [PATCH v2] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Mike Dunn
• [PATCH v2] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Mike Dunn
• [PATCH v3 0/6] DT support for AT91RM9200   Joachim Eastwood
• [PATCH 1/2] net: at91_ether: add dt support   Joachim Eastwood
• [PATCH v3 0/6] DT support for AT91RM9200   Joachim Eastwood
• [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h   Joachim Eastwood
• linux-next: manual merge of the arm-soc tree with the net-next tree   Joachim Eastwood
• [RFC 3/3] ARM/AVR32: get rid of serial_at91.h   Joachim Eastwood
• [PATCH] serial: atmel_serial: remove atmel open/close hooks   Joachim Eastwood
• arm: at91: mach header cleanup   Joachim Eastwood
• [PATCH] net/macb: GEM DMA configuration register update   Joachim Eastwood
• [PATCH] net/macb: Use non-coherent memory for rx buffers   Joachim Eastwood
• [PATCH] ARM: shmobile: r8a7779: Fix PFC - MOD_SEL2 missed an entry   Phil Edworthy
• [PATCHv3 1/6] arch: Change defconfigs to point to g_mass_storage.   Hans-Christian Egtvedt
• Testing i2c in 3.6.0-next-20121012 for i.mx233   Fabio Estevam
• [PATCH 7/7] ARM i.MX51 babbage: Add display support   Fabio Estevam
• [PATCH] ARM: boot: Fix usage of kecho   Fabio Estevam
• [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx   Fabio Estevam
• [PATCH v2 1/2] ARM: mx27_3ds: Add VPU support   Fabio Estevam
• [PATCH v2 2/2] ARM: imx_v4_v5_defconfig: Add VPU support   Fabio Estevam
• [PATCH v2 1/2] ARM: mx27: Add VPU support   Fabio Estevam
• [PATCH v2 2/2] ARM: imx_v4_v5_defconfig: Add VPU support   Fabio Estevam
• [PATCH v4 2/2] mx2_camera: Fix regression caused by clock conversion   Fabio Estevam
• [PATCH v2 1/2] ARM: mx27: Add VPU support   Fabio Estevam
• [PATCH 7/8] ata: highbank: mark ahci_highbank_probe as __devinit   Fabio Estevam
• [RFC] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Fabio Estevam
• [PATCH 2/4] ARM: imx: add imx5x usbmisc clock lookups   Fabio Estevam
• [PATCH v3 1/3] ARM: imx27_visstrim_m10: Do not reserve VPU DMA pool on board file   Fabio Estevam
• [PATCH v3 2/3] ARM: mx27: Align IIM registers with Reference Manual   Fabio Estevam
• [PATCH v3 3/3] ARM: mx27: Add VPU support   Fabio Estevam
• [PATCH] ARM: Kconfig: Do not select ARCH_VEXPRESS on ARCH_MULTI_V7   Fabio Estevam
• [PATCH] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Fabio Estevam
• [PATCH] ARM: Kconfig: Do not force selection of ARCH_VEXPRESS by ARCH_MULTI_V7   Fabio Estevam
• [PATCH v2] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Fabio Estevam
• [PATCH v2] ARM: Kconfig: Do not force selection of ARCH_VEXPRESS by ARCH_MULTI_V7   Fabio Estevam
• [PATCH v3] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Fabio Estevam
• [PATCH] ARM: dts: mx27: Fix the AIPI bus for FEC   Fabio Estevam
• [PATCH v2] ARM: dts: mx27: Fix the AIPI bus for FEC   Fabio Estevam
• [RFC] ARM: mx27: Replace clk_register_clkdev with clock DT lookup   Fabio Estevam
• [RFC] ARM: mx27: Replace clk_register_clkdev with clock DT lookup   Fabio Estevam
• [RFC] ARM: mx27: Replace clk_register_clkdev with clock DT lookup   Fabio Estevam
• [PATCH 1/4] ARM: dts: Add very basic dt support for mx31pdk   Fabio Estevam
• [PATCH 2/4] ARM: Let CONFIG_MACH_IMX31_DT be built by default   Fabio Estevam
• [PATCH 3/4] ARM: clk-imx31: Add dummy clock   Fabio Estevam
• [PATCH 4/4] ARM: mx31: Replace clk_register_clkdev with clock DT lookup   Fabio Estevam
• [PATCH] ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices   Fabio Estevam
• [PATCH 1/4] ARM: dts: Add very basic dt support for mx31pdk   Fabio Estevam
• [PATCH] ARM: mx25_3ds: Add camera support   Fabio Estevam
• [PATCH v2] ARM: dts: mx27: Fix the AIPI bus for FEC   Fabio Estevam
• [PATCH] ARM: mx27: Replace clk_register_clkdev with clock DT lookup   Fabio Estevam
• [PATCH] ARM: mx25_3ds: Add camera support   Fabio Estevam
• [PATCH] ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices   Fabio Estevam
• Help building 3.x kernel for AT91SAM9x5   Bryan Evenson
• Help building 3.x kernel for AT91SAM9x5   Bryan Evenson
• [PATCH v2] Add support for generic BCM SoC chipsets   Florian Fainelli
• [PATCH v2] Add support for generic BCM SoC chipsets   Florian Fainelli
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Joel A Fernandes
• [PATCH] ARM: OMAP2+: AM33XX: clock data: fix mcasp entries   Joel A Fernandes
• [PATCHv2 1/6] arch: Change defconfigs to point to g_mass_storage.   Nicolas Ferre
• [PATCH] net/at91_ether: fix the use of macb structure   Nicolas Ferre
• [RFC patch v3 1/4] ARM: at91: atmel-ssc: add platform device id table   Nicolas Ferre
• [PATCH 05/10] arn: at91: move at91_tc.h to arch/arm/mach-at91   Nicolas Ferre
• linux-next: manual merge of the arm-soc tree with the usb tree   Nicolas Ferre
• linux-next: manual merge of the arm-soc tree with the usb tree   Nicolas Ferre
• linux-next: manual merge of the arm-soc tree with the pinctrl tree   Nicolas Ferre
• [PATCH RESEND 3/4] pinctrl: at91: Prevent NULL dereference if of_match_device returns NULL   Nicolas Ferre
• [PATCH 1/3] i2c: at91: fix compilation warning   Nicolas Ferre
• [PATCH 2/3] i2c: at91: change struct members indentation   Nicolas Ferre
• [PATCH 3/3] i2c: at91: add dma support   Nicolas Ferre
• [PATCH RESEND 3/4] pinctrl: at91: Prevent NULL dereference if of_match_device returns NULL   Nicolas Ferre
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Nicolas Ferre
• [RFC 3/3] ARM/AVR32: get rid of serial_at91.h   Nicolas Ferre
• [PATCH] ARM: at91/usbh: fix overcurrent gpio setup   Nicolas Ferre
• [PATCH 1/5] ARM: AT91SAM9G45: fix crypto peripherals irq issue due to sparse irq support.   Nicolas Ferre
• [PATCH 1/1] arm: at91: add Ronetix pm9g45 board support   Nicolas Ferre
• [PATCH 1/1] arm: at91: add Ronetix pm9g45 board support   Nicolas Ferre
• [PATCH RESEND] ARM: at91: dt: evk-pro3: enable uart0 and uart2   Nicolas Ferre
• [PATCH 09/11] watchdog/at91sam9_wdt: add support to device tree   Nicolas Ferre
• [PATCH v9 RESEND 1/3] watchdog: at91sam9_wdt: add device tree support   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.7-rc6   Nicolas Ferre
• Final call for 3.8 arm-soc patches   Nicolas Ferre
• [PATCH] serial: atmel_serial: remove atmel open/close hooks   Nicolas Ferre
• [PATCH 1/1] atmel: move ATMEL_MAX_UART to platform_data/atmel.h   Nicolas Ferre
• [PATCH] net/macb: move to circ_buf macros and fix initial condition   Nicolas Ferre
• [PATCH v2] net/macb: move to circ_buf macros and fix initial condition   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.7-rc7   Nicolas Ferre
• [GIT PULL] at91: header fix for 3.8   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.7-rc7   Nicolas Ferre
• [GIT PULL] at91: tiny cleanup for 3.8   Nicolas Ferre
• [GIT PULL] at91: DT material for 3.8   Nicolas Ferre
• [GIT PULL v2] at91: fixes for 3.7-rc7   Nicolas Ferre
• [PATCH 119/493] usb: remove use of __devexit_p   Nicolas Ferre
• [PATCH 136/493] ethernet: remove use of __devexit_p   Nicolas Ferre
• [PATCH 145/493] tty: serial: remove use of __devexit_p   Nicolas Ferre
• [PATCH 159/493] usb: remove use of __devinit   Nicolas Ferre
• [PATCH 161/493] tty: remove use of __devinit   Nicolas Ferre
• [PATCH v5 6/8] watchdog: at91sam9_wdt: add timeout-sec property binding   Nicolas Ferre
• [PATCH] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Nicolas Ferre
• [PULL pinctrl-for 3.8] at91 update   Nicolas Ferre
• [GIT PULL v2] at91: fixes for 3.7-rc7   Nicolas Ferre
• [PATCH 1/1] spi/atmel: add DT support   Nicolas Ferre
• [PATCH] net/macb: GEM DMA configuration register update   Nicolas Ferre
• [PATCH] net/macb: Use non-coherent memory for rx buffers   Nicolas Ferre
• linux-next: manual merge of the arm-soc tree with the pinctrl tree   Nicolas Ferre
• linux-next: manual merge of the arm-soc tree with the sound-asoc and pincrtl trees   Nicolas Ferre
• linux-next: manual merge of the arm-soc tree with the arm-soc and pincrtl trees   Nicolas Ferre
• linux-next: manual merge of the arm-soc tree with the arm tree   Nicolas Ferre
• [PATCH] net/macb: Use non-coherent memory for rx buffers   Nicolas Ferre
• [PATCH] ARM: SAMSUNG: Fix typo in definition of VIDCON1_VSTATUS_FRONTPORCH value   Tomasz Figa
• [PATCH] ARM: EXYNOS: Make s3c_device_i2c0 always use id 0   Tomasz Figa
• [PATCH] ARM: EXYNOS: origen: Add missing USB regulators   Tomasz Figa
• [PATCH] ARM: EXYNOS: origen: Add missing USB regulators   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Add support for Exynos4x12 SoCs   Tomasz Figa
• [PATCH v2] ARM: EXYNOS: origen: Add missing USB regulators   Tomasz Figa
• [PATCH 1/2] ARM: S3C64XX: Remove duplicated camera clock   Tomasz Figa
• [PATCH 2/2] ARM: S3C64XX: Staticly define parent clock of "camera" clock   Tomasz Figa
• [PATCH v3 4/6] ARM: EXYNOS: Add support for Exynos secure firmware   Tomasz Figa
• [PATCH v3 6/6] ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up   Tomasz Figa
• [PATCH v3 0/6] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Tomasz Figa
• [PATCH] cpufreq: exynos: Broadcast frequency change notifications for all cores   Tomasz Figa
• [PATCH] ARM: dts: exynos4210-trats: Remove broken-voltage property from sdhci node   Tomasz Figa
• [PATCH] i2c: i2c-s3c2410: Add support for pinctrl   Tomasz Figa
• [PATCH v3 0/4] ARM: EXYNOS: Power domain DT support extension   Tomasz Figa
• [PATCH v3 1/4] ARM: EXYNOS: pm_domain: Detect domain state on registration from DT   Tomasz Figa
• [PATCH v3 2/4] ARM: EXYNOS: pm_domain: Fix power domain name initialization   Tomasz Figa
• [PATCH v3 3/4] ARM: EXYNOS: pm_domain: Bind devices to power domains using DT   Tomasz Figa
• [PATCH v3 4/4] ARM: dts: exynos4: Set up power domains   Tomasz Figa
• [PATCH v3 0/4] ARM: EXYNOS: Power domain DT support extension   Tomasz Figa
• [PATCH v3 RESEND 0/4] ARM: EXYNOS: Power domain DT support extension   Tomasz Figa
• [PATCH v3 1/4] ARM: EXYNOS: pm_domain: Detect domain state on registration from DT   Tomasz Figa
• [PATCH v3 2/4] ARM: EXYNOS: pm_domain: Fix power domain name initialization   Tomasz Figa
• [PATCH v3 3/4] ARM: EXYNOS: pm_domain: Bind devices to power domains using DT   Tomasz Figa
• [PATCH v3 4/4] ARM: dts: exynos4: Set up power domains   Tomasz Figa
• [PATCH v3 01/11] clk: samsung: add common clock framework helper functions for Samsung platforms   Tomasz Figa
• [PATCH v3 03/11] clk: exynos4: register clocks using common clock framework   Tomasz Figa
• [PATCH v3 05/11] ARM: dts: add exynos4 clock controller nodes   Tomasz Figa
• [PATCH v3 04/11] ARM: Exynos4: Migrate clock support to common clock framework   Tomasz Figa
• [PATCH v3 07/11] ARM: Exynos4: allow legacy board support to specify xxti and xusbxti clock speed   Tomasz Figa
• [PATCH v3 01/11] clk: samsung: add common clock framework helper functions for Samsung platforms   Tomasz Figa
• [PATCH v3 04/11] ARM: Exynos4: Migrate clock support to common clock framework   Tomasz Figa
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Tomasz Figa
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Tomasz Figa
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Tomasz Figa
• [PATCH 0/5] ARM: dts: exynos4210-trats: Device tree extension   Tomasz Figa
• [PATCH 1/5] ARM: dts: exynos4210-trats: Update for pinctrl-samsung driver   Tomasz Figa
• [PATCH 2/5] ARM: dts: exynos4210-trats: Add nodes for GPIO keys available on Trats   Tomasz Figa
• [PATCH 3/5] ARM: dts: exynos4210-trats: Add node for i2c3 bus   Tomasz Figa
• [PATCH 4/5] ARM: dts: exynos4210-trats: Add node for touchscreen voltage regulator   Tomasz Figa
• [PATCH 5/5] ARM: dts: exynos4210-trats: Add node for touchscreen   Tomasz Figa
• [PATCH 0/4] ARM: dts: exynos4210-origen: Device tree fixes   Tomasz Figa
• [PATCH 1/4] ARM: dts: exynos4210-origen: Split memory sections   Tomasz Figa
• [PATCH 2/4] ARM: dts: exynos4210-origen: Update for pinctrl-samsung driver   Tomasz Figa
• [PATCH 3/4] ARM: dts: exynos4210-origen: Update sdhci nodes for current bindings   Tomasz Figa
• [PATCH 4/4] ARM: dts: exynos4210-origen: Add vmmc fixed voltage regulator   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Use drive strength 3 for SD pins   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Use drive strength 3 for SD pins   Tomasz Figa
• [PATCH 0/4] ARM: dts: exynos4210-origen: Device tree fixes   Tomasz Figa
• [PATCH] ARM: dts: exynos4: Use drive strength 3 for SD pins   Tomasz Figa
• [PATCH v3 RESEND 0/4] ARM: EXYNOS: Power domain DT support extension   Tomasz Figa
• [PATCH] cpufreq: exynos: Broadcast frequency change notifications for all cores   Tomasz Figa
• [PATCH v8 3/3] ARM: EXYNOS: Enabling samsung-usbphy driver for EXYNOS4210   Tomasz Figa
• [PATCH v8 1/2] usb: phy: samsung: Introducing usb phy driver for hsotg   Tomasz Figa
• [PATCH v8 2/2] usb: s3c-hsotg: Adding phy driver support   Tomasz Figa
• [PATCH v8 1/3] ARM: S3C64XX: Removing old phy setup code   Tomasz Figa
• [PATCH v8 2/3] ARM: S3C64XX: Enabling samsung-usbphy driver   Tomasz Figa
• [PATCH] cpufreq: exynos: Broadcast frequency change notifications for all cores   Tomasz Figa
• [PATCH v3 0/6] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Tomasz Figa
• [PATCH v4 0/5] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH v4 1/5] ARM: Add interface for registering and calling firmware-specific operations   Tomasz Figa
• [PATCH v4 2/5] ARM: EXYNOS: Add support for secure monitor calls   Tomasz Figa
• [PATCH v4 3/5] ARM: EXYNOS: Add support for Exynos secure firmware   Tomasz Figa
• [PATCH v4 4/5] ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.   Tomasz Figa
• [PATCH v4 5/5] ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up   Tomasz Figa
• [PATCH] ARM: dts: add initial dts file for ORIGEN4QUAD   Tomasz Figa
• [PATCH] ARM: dts: add initial dts file for ORIGEN4QUAD   Tomasz Figa
• [PATCH v8 1/2] usb: phy: samsung: Introducing usb phy driver for hsotg   Tomasz Figa
• [PATCH v8 2/2] usb: s3c-hsotg: Adding phy driver support   Tomasz Figa
• [PATCH v4 0/5] ARM: EXYNOS: Add secure firmware support   Tomasz Figa
• [PATCH V7 1/7] kbuild: centralize .dts->.dtb rule   Max Filippov
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Larry Finger
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Larry Finger
• [PATCH 2/4] rtc: OMAP: Add system pm_power_off to rtc driver   Colin FoeParker
• [PATCH] ARM: plat-versatile: move secondary CPU startup code out of .init for hotplug   Claudio Fontana
• [PATCH 0/1 RESEND] ARM: plat-versatile: move secondary CPU startup out of .init.   Claudio Fontana
• [PATCH 1/1 RESEND] ARM: plat-versatile: move secondary CPU startup code out of .init.   Claudio Fontana
• [PATCH 0/1 RESEND 2] ARM: plat-versatile: move secondary CPU startup out of .init.   Claudio Fontana
• [PATCH 1/1 RESEND 2] ARM: plat-versatile: move secondary CPU startup out of .init.   Claudio Fontana
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Per Forlin
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Per Forlin
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Per Forlin
• ARM: imx: ehci-imx35: fix host power mask bit   Christoph Fritz
• [PATCH] ARM: imx: ehci: fix host power mask bit   Christoph Fritz
• [PATCH 7/7] ARM i.MX51 babbage: Add display support   Martin Fuzzey
• [PATCH] Fix typo in DT binding documentation for i.MX IPU3   Martin Fuzzey
• [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25   Martin Fuzzey
• [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25   Martin Fuzzey
• [PATCH] Video: Backlight: Add a MMIO backlight driver using DT.   Martin Fuzzey
• Order of clock multiplexer registrations   Martin Fuzzey
• [PATCH] ARM : CLK: Fix clock multiplexers when registered before their parents.   Martin Fuzzey
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Per Förlin
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Per Förlin
• [PATCH 2/2] ARM: tegra: moving stuff away from mach/clk.h   Prashant Gaikwad
• [PATCH 1/2] ARM: tegra: remove unused functions in mach/clk.h   Prashant Gaikwad
• [PATCH 2/2] ARM: tegra: moving stuff away from mach/clk.h   Prashant Gaikwad
• [PATCH v2 5/6] ARM: davinci: remoteproc board support for OMAP-L138 DSP   Ben Gardiner
• [PATCH 7/8] ata: highbank: mark ahci_highbank_probe as __devinit   Jeff Garzik
• [PATCH v7 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Vivek Gautam
• [PATCH v2 0/2] Enable ehci and ohci devices for exynos5250   Vivek Gautam
• [PATCH v2 1/2] ARM: Exynos5250: Enabling ehci-s5p driver   Vivek Gautam
• [PATCH v2 2/2] ARM: Exynos5250: Enabling ohci-exynos driver   Vivek Gautam
• [PATCH v2 1/2] ARM: Exynos5250: Enabling ehci-s5p driver   Vivek Gautam
• [PATCH v2 2/2] ARM: Exynos5250: Enabling ohci-exynos driver   Vivek Gautam
• [PATCH v2 1/2] ARM: Exynos5250: Enabling ehci-s5p driver   Vivek Gautam
• [PATCH v2 2/2] ARM: Exynos5250: Enabling ohci-exynos driver   Vivek Gautam
• [PATCH v2] ARM: EXYNOS5250: Add support for USB 3.0 dwc3 controller   Vivek Gautam
• [PATCH v2] ARM: Exynos5250: Enabling dwc3-exynos driver   Vivek Gautam
• [PATCH net-next 1/2] ARM: net: bpf_jit_32: add XOR instruction for BPF JIT   Mircea Gherzan
• [PATCH net-next 2/2] ARM: net: bpf_jit_32: add VLAN instructions for BPF JIT   Mircea Gherzan
• [PATCH] atmel_serial oops when peripheral clock misconfigured   Douglas Gilbert
• [PATCH] add hardware I2C support for ARM IMX23   Sander van Ginkel
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Simon Glass
• [PATCH 2/2] i2c-s3c2410: Add bus arbitration implementation   Simon Glass
• [PATCH] ARM: dts: mxs: Add 16 bits LCD screen muxing options for I.MX28   Gwenhael Goavec-Merou
• [PATCH 1/2] ARM: mxs: apf28dev: Add pinctrl and gpios   Gwenhael Goavec-Merou
• [PATCH 2/2] ARM: mxs: apf28dev: Add LCD and backlight support   Gwenhael Goavec-Merou
• [PATCH] ARM: mxs: apf28dev: Add I2C, SPI and spidev support   Gwenhael Goavec-Merou
• [PATCH v2] ARM: mxs: apf28dev: Add I2C and SPI support   Gwenhael Goavec-Merou
• [PATCH 097/493] scsi: remove use of __devexit_p   Masanori Goto
• [PATCH 425/493] scsi: remove use of __devexit   Masanori Goto
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Mark A. Greer
• [PATCH v3 0/7] crypto: omap-sham updates   Mark A. Greer
• [PATCH v3 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH v3 2/7] ARM: OMAP2xxx: hwmod: Add DMA support for SHAM module   Mark A. Greer
• [PATCH v3 3/7] ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH v3 4/7] ARM: OMAP2+: Remove unnecessary message when no SHA IP is present   Mark A. Greer
• [PATCH v3 5/7] crypto: omap-sham: Convert to use pm_runtime API   Mark A. Greer
• [PATCH v3 6/7] crypto: omap-sham: Add code to use dmaengine API   Mark A. Greer
• [PATCH v3 7/7] crypto: omap_sham: Remove usage of private DMA API   Mark A. Greer
• [PATCH v3 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH v3 7/7] crypto: omap_sham: Remove usage of private DMA API   Mark A. Greer
• [PATCH v3 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH v3 7/7] crypto: omap_sham: Remove usage of private DMA API   Mark A. Greer
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Mark A. Greer
• [PATCH v3 7/7] crypto: omap_sham: Remove usage of private DMA API   Mark A. Greer
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Mark A. Greer
• [PATCH] dmaengine: omap-dma: Allow DMA controller to prefetch data   Mark A. Greer
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Mark A. Greer
• [PATCH v4 0/8] crypto: omap-sham updates   Mark A. Greer
• [PATCH v4 1/8] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH v4 2/8] ARM: OMAP2xxx: hwmod: Add DMA support for SHAM module   Mark A. Greer
• [PATCH v4 3/8] ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod   Mark A. Greer
• [PATCH v4 4/8] ARM: OMAP2+: Remove unnecessary message when no SHA IP is present   Mark A. Greer
• [PATCH v4 5/8] crypto: omap-sham: Remove cpu_is/omap_type check from driver   Mark A. Greer
• [PATCH v4 6/8] crypto: omap-sham: Convert to use pm_runtime API   Mark A. Greer
• [PATCH v4 7/8] crypto: omap-sham: Add code to use dmaengine API   Mark A. Greer
• [PATCH v4 8/8] crypto: omap_sham: Remove usage of private DMA API   Mark A. Greer
• [PATCH 0/7] crypto: omap-aes updates   Mark A. Greer
• [PATCH 1/7] ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod   Mark A. Greer
• [PATCH 2/7] ARM: OMAP3xxx: hwmod: Convert AES crypto device data to hwmod   Mark A. Greer
• [PATCH 3/7] ARM: OMAP2+: Remove unnecessary message when no AES IP is present   Mark A. Greer
• [PATCH 4/7] crypto: omap-aes: Remove cpu_is/omap_type check from driver   Mark A. Greer
• [PATCH 5/7] crypto: omap-aes: Convert to use pm_runtime API   Mark A. Greer
• [PATCH 6/7] crypto: omap-aes: Add code to use dmaengine API   Mark A. Greer
• [PATCH 7/7] crypto: omap-aes: Remove usage of private DMA API   Mark A. Greer
• [PATCH 0/7] crypto: omap-aes updates   Mark A. Greer
• [PATCH] Don't mark shared helper functions as inline   Mark A. Greer
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH v2 1/2] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH 2/2] ARM: OMAP3: cm-t3517: use GPTIMER for system clock   Igor Grinberg
• [PATCH 0/2] ARM: OMAP: ads7846: fix pendown debounce setting   Igor Grinberg
• [PATCH 1/2] ads7846: enable pendown GPIO debounce time setting   Igor Grinberg
• [PATCH 2/2] ARM: OMAP: ads7846: fix pendown debounce setting   Igor Grinberg
• [PATCH v2 1/2] ads7846: enable pendown GPIO debounce time setting   Igor Grinberg
• [PATCH v3 1/2] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH 2/3] ARM: OMAP4: Fix build error and warning in timer.c   Igor Grinberg
• [PATCH 3/3] ARM: AM335x: Fix warning in timer.c   Igor Grinberg
• [PATCH V2 3/4] ARM: AM335x: Fix warning in timer.c   Igor Grinberg
• [PATCH 0/6] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH 1/6] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove   Michael Grzeschik
• [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx   Michael Grzeschik
• [PATCH 3/6] usb: chipidea: usbmisc: prepare driver to handle more than one soc   Michael Grzeschik
• [PATCH 4/6] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Michael Grzeschik
• [PATCH 5/6] usb: chipidea: usbmisc: add mx53 support   Michael Grzeschik
• [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25   Michael Grzeschik
• [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx   Michael Grzeschik
• [PATCH 4/6] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Michael Grzeschik
• [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx   Michael Grzeschik
• [PATCH 0/9] chipidea fixes and features   Michael Grzeschik
• [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata   Michael Grzeschik
• [PATCH 2/9] usb: chipidea: ci13xxx_imx: add 2nd and 3rd clock to support imx5x and newer   Michael Grzeschik
• [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata   Michael Grzeschik
• [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Michael Grzeschik
• [PATCH 5/9] usb: add phy connection by phy-mode   Michael Grzeschik
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Michael Grzeschik
• [PATCH 7/9] usb: chipidea: udc: add force-full-speed option   Michael Grzeschik
• [PATCH 8/9] usb: chipidea: udc: remove unlocked ep_queue which can lead to an race   Michael Grzeschik
• [PATCH 9/9] usb: chipidea: udc: configure iso endpoints   Michael Grzeschik
• [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25   Michael Grzeschik
• [PATCH v2 0/7] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH v2 1/7] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx   Michael Grzeschik
• [PATCH v2 2/7] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove   Michael Grzeschik
• [PATCH v2 3/7] usb: chipidea: usbmisc: fix a potential race condition   Michael Grzeschik
• [PATCH v2 4/7] usb: chipidea: usbmisc: prepare driver to handle more than one soc   Michael Grzeschik
• [PATCH v2 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Michael Grzeschik
• [PATCH v2 6/7] usb: chipidea: usbmisc: add mx53 support   Michael Grzeschik
• [PATCH v2 7/7] usb: chipidea: usbmisc: add post handling and errata fix for mx25   Michael Grzeschik
• [PATCH 0/4] mx5x usb{misc} devictree bindings and clocks   Michael Grzeschik
• [PATCH 1/4] ARM: imx: add imx5x usb controller clock lookups   Michael Grzeschik
• [PATCH 2/4] ARM: imx: add imx5x usbmisc clock lookups   Michael Grzeschik
• [PATCH 3/4] ARM: dts: imx: rename imx5x usb entries as in imx6q.dtsi   Michael Grzeschik
• [PATCH 4/4] ARM: dts: imx: add imx5x phy-mode entries   Michael Grzeschik
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Michael Grzeschik
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Michael Grzeschik
• [PATCH v2 6/7] usb: chipidea: usbmisc: add mx53 support   Michael Grzeschik
• [PATCH v3 0/7] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH v3 1/7] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx   Michael Grzeschik
• [PATCH v3 2/7] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove   Michael Grzeschik
• [PATCH v3 3/7] usb: chipidea: usbmisc: fix a potential race condition   Michael Grzeschik
• [PATCH v3 4/7] usb: chipidea: usbmisc: prepare driver to handle more than one soc   Michael Grzeschik
• [PATCH v3 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Michael Grzeschik
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support   Michael Grzeschik
• [PATCH v3 7/7] usb: chipidea: usbmisc: add post handling and errata fix for mx25   Michael Grzeschik
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Michael Grzeschik
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support   Michael Grzeschik
• [PATCH v3 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Michael Grzeschik
• [PATCH v3 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Michael Grzeschik
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Michael Grzeschik
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH v4 1/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx   Michael Grzeschik
• [PATCH v4 2/6] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove   Michael Grzeschik
• [PATCH v4 3/6] usb: chipidea: usbmisc: fix a potential race condition   Michael Grzeschik
• [PATCH v4 4/6] usb: chipidea: usbmisc: prepare driver to handle more than one soc   Michael Grzeschik
• [PATCH v4 5/6] usb: chipidea: usbmisc: add mx53 support   Michael Grzeschik
• [PATCH v4 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25   Michael Grzeschik
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Simon Guinot
• linux-next: manual merge of the arm-soc tree with the driver-core tree   Simon Guinot
• [RFC 6/6] ARM: sched: clear SD_SHARE_POWERLINE   Vincent Guittot
• [RFC 3/6] sched: pack small tasks   Vincent Guittot
• [RFC 3/6] sched: pack small tasks   Vincent Guittot
• [RFC 3/6] sched: pack small tasks   Vincent Guittot
• [RFC v2 PATCH 2/2] sched: Use Per-Entity-Load-Tracking metric for load balancing   Vincent Guittot
• [PATCH v3 1/5] ARM: kernel: smp_setup_processor_id() updates   Vincent Guittot
• [RFC 3/6] sched: pack small tasks   Vincent Guittot
• [4/4] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Jason Gunthorpe
• [PATCH] ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan   Jason Gunthorpe
• [PATCH] ARM: Kirkwood: Update PCI-E fixup   Jason Gunthorpe
• [PATCH] ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan   Jason Gunthorpe
• [PATCH] ARM: Kirkwood: Update PCI-E fixup   Jason Gunthorpe
• [PATCH] ARM: Kirkwood: Support basic hotplug for PCI-E   Jason Gunthorpe
• [PATCH] ARM: Kirkwood: Support basic hotplug for PCI-E   Jason Gunthorpe
• [PATCH] ARM: Kirkwood: Support basic hotplug for PCI-E   Jason Gunthorpe
• [PATCH] ARM: Kirkwood: Add SPI_CHPA and SPI_CPOL support to spi-orion   Jason Gunthorpe
• [PATCH] ARM: Kirkwood: Add SPI_CHPA and SPI_CPOL support to spi-orion   Jason Gunthorpe
• [PATCH 3/3] ARM: dts: cfa10049: Add the DH2228FV DAC to the DTS   Shawn Guo
• [PATCH] ARM: dts: mxs: Add 16 bits LCD screen muxing options for I.MX28   Shawn Guo
• [PATCH 09/10] ARM: SMP: add function arch_send_wakeup_ipi_mask()   Shawn Guo
• [PATCH 1/2] ARM: mxs: apf28dev: Add pinctrl and gpios   Shawn Guo
• [PATCH 0/2] Pinctrl muxing for the Crystalfontz boards   Shawn Guo
• scheduler clock for MXS [Was: Re: Wakeup latency measured with SCHED_TRACER depends on HZ]   Shawn Guo
• scheduler clock for MXS [Was: Re: Wakeup latency measured with SCHED_TRACER depends on HZ]   Shawn Guo
• [PATCH 09/10] ARM: SMP: add function arch_send_wakeup_ipi_mask()   Shawn Guo
• scheduler clock for MXS   Shawn Guo
• scheduler clock for MXS [Was: Re: Wakeup latency measured with SCHED_TRACER depends on HZ]   Shawn Guo
• scheduler clock for MXS   Shawn Guo
• [PATCH] ARM: mxs: Setup scheduler clock   Shawn Guo
• [PATCH v2] ARM: mxs: apf28dev: Add I2C and SPI support   Shawn Guo
• [PATCH 1/1] ARM: dts: imx6q-sabresd: add volume up/down gpio keys   Shawn Guo
• [PATCH resend] rtc: i.MX dryice: Add devicetree support   Shawn Guo
• [PATCH] i.MX IPU SoC support   Shawn Guo
• [PATCH] ARM i.MX dts: Consistently add labels to devicenodes   Shawn Guo
• [PATCH] ARM i.MX dts: Consistently add labels to devicenodes   Shawn Guo
• [PATCH 01/10] ARM: imx6q: print silicon version on boot   Shawn Guo
• [PATCH 01/10] ARM: imx6q: print silicon version on boot   Shawn Guo
• [PATCH 01/10] ARM: imx6q: print silicon version on boot   Shawn Guo
• [PATCH 4/4] ARM: dts: imx: add imx5x phy-mode entries   Shawn Guo
• [GIT PULL] imx device tree changes for 3.8   Shawn Guo
• [GIT PULL] mxs changes for 3.8   Shawn Guo
• [PATCH 2/2] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Shawn Guo
• [PATCH 2/4] ARM: imx: add imx5x usbmisc clock lookups   Shawn Guo
• [PATCH 4/4] ARM: dts: imx: add imx5x phy-mode entries   Shawn Guo
• [PATCH 3/3] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Shawn Guo
• [PATCH] ARM: imx23-olinuxino Add spi support   Shawn Guo
• [PATCH] MXS: imx23-olinuxino: Add i2c support   Shawn Guo
• [PATCH] ARM: mxs: Add SchulerControl SPS1 DTS file   Shawn Guo
• [PATCH 3/3] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Shawn Guo
• [PATCH 2/2] ARM: dts: mxs: add oled support for the cfa-10036   Shawn Guo
• [PATCH v2 1/3] CLK: get rid of HAVE_CLK_PREPARE   Shawn Guo
• [PATCH v3] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH 6/9] ARM: remove mach .handle_irq for GIC users   Shawn Guo
• [PATCH] pwm support for newer i.MX   Shawn Guo
• [PATCH] ARM i.MX6: Fix ethernet PLL clocks   Shawn Guo
• [GIT PULL] mxs device tree changes for 3.8 (take 2)   Shawn Guo
• [PATCH] ARM i.MX6: Fix ethernet PLL clocks   Shawn Guo
• [PATCHv2] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Shawn Guo
• [PATCH 2/3] ARM i.MX6: Fix ethernet PLL clocks   Shawn Guo
• [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove   Shawn Guo
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Shawn Guo
• [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove   Shawn Guo
• [PATCH] mmc: sdhci-imx-esdhc: use more devm_* functions   Shawn Guo
• [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove   Shawn Guo
• [PATCH] clocksource: use clockevents_config_and_register() where possible   Shawn Guo
• [PATCH] ARM: use clockevents_config_and_register() where possible   Shawn Guo
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Shawn Guo
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Shawn Guo
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Shawn Guo
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Shawn Guo
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Shawn Guo
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Shawn Guo
• [PATCH 2/2] ARM: S3C64XX: Statically define parent clock of the "camera" clock   Andrey Gusakov
• [PATCH] ARM: S3C64XX: Statically define parent clock of the "camera" clock   Andrey Gusakov
• [PATCH 0/4] Implement device tree support for ab8500 BM Devices   Rajanikanth H.V
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Rajanikanth H.V
• [PATCH 2/4] mfd: ab8500: add devicetree support for btemp   Rajanikanth H.V
• [PATCH 3/4] mfd: ab8500: add devicetree support for charger   Rajanikanth H.V
• [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg   Rajanikanth H.V
• [PATCH] mfd: ab8500: add static linkage for battery info   Rajanikanth H.V
• [PATCH] ab8500: remove explicit handling of battery type   Rajanikanth H.V
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Rajanikanth HV
• [PATCH 0/4] Implement device tree support for ab8500 BM Devices   Rajanikanth HV
• [PATCH] ARM: cache-l2x0: move 'l2_wt_override' variable to proper place   Jingoo Han
• [PATCH] ARM: cache-l2x0: move 'l2_wt_override' variable to proper place   Jingoo Han
• [PATCH] ARM: SAMSUNG: Fix typo in definition of VIDCON1_VSTATUS_FRONTPORCH value   Jingoo Han
• [PATCH 121/493] video: remove use of __devexit_p   Jingoo Han
• [PATCH 158/493] video: remove use of __devinit   Jingoo Han
• [PATCH 446/493] video: remove use of __devexit   Jingoo Han
• [PATCH] backlight: corgi_lcd: Fix WARN_ON() when calling corgi_bl_set_intensity.   Jingoo Han
• [PATCH] backlight: corgi_lcd: Use gpio_set_value_cansleep() for akita machines to avoid WARN_ON trigger   Jingoo Han
• [PATCH 0/2] Input: nomadik-ske-keypad - clk fixups   Ulf Hansson
• [PATCH 1/2] Input: nomadik-ske-keypad - fixup use of clk   Ulf Hansson
• [PATCH 2/2] Input: nomadik-ske-keypad - start using the apb_pclk   Ulf Hansson
• [PATCH 2/2] Input: nomadik-ske-keypad - start using the apb_pclk   Ulf Hansson
• [PATCH 0/8] clk: ux500: Fixup smp_twd clk for clk notifiers   Ulf Hansson
• [PATCH 1/2] ASoC: Ux500: Fixup use of clocks   Ulf Hansson
• [RESEND PATCH 1/2] ASoC: Ux500: Fixup use of clocks   Ulf Hansson
• [RESEND PATCH 2/2] ASoC: Ux500: Control apb clock   Ulf Hansson
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Ulf Hansson
• [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling   Ulf Hansson
• [PATCH 0/2] clk: ux500: Add abx500 clock driver   Ulf Hansson
• [PATCH 1/2] clk: ux500: Initial support for abx500 clock driver   Ulf Hansson
• [PATCH 2/2] mfd: ab8500-core: Add abx500-clk as an mfd child device   Ulf Hansson
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Ulf Hansson
• [PATCH 0/2] clk: ux500: Add abx500 clock driver   Ulf Hansson
• [PATCH 0/2] Input: nomadik-ske-keypad - clk fixups   Ulf Hansson
• [PATCH] clk: ux500: assume PRCC clocks are off by default   Ulf Hansson
• [PATCH] clk: ux500: fix bit error   Ulf Hansson
• [PATCH 0/5] cpufreq: db8500: Rename driver and update some parts   Ulf Hansson
• [PATCH 1/5] cpufreq: Give driver used for dbx500 family a more generic name   Ulf Hansson
• [PATCH 2/5] mfd: db8500: Update cpufreq device name   Ulf Hansson
• [PATCH 3/5] cpufreq: dbx500: Move clk_get to probe   Ulf Hansson
• [PATCH 4/5] cpufreq: dbx500: Minor code cleanup   Ulf Hansson
• [PATCH 5/5] cpufreq: dbx500: Update file header   Ulf Hansson
• [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling   Ulf Hansson
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Ulf Hansson
• [PATCH 2/5] mfd: db8500: Update cpufreq device name   Ulf Hansson
• [PATCH 0/5] cpufreq: db8500: Rename driver and update some parts   Ulf Hansson
• possibility of parent clock selection through DT   Shiraz Hashim
• possibility of parent clock selection through DT   Shiraz Hashim
• [PATCH] Set bit 22 in the PL310 (cache controller) AuxCtlr register   Shiraz Hashim
• [PATCH] Set bit 22 in the PL310 (cache controller) AuxCtlr register   Shiraz Hashim
• possibility of parent clock selection through DT   Shiraz Hashim
• [PATCH v3] Visstrim SM10: Use mo_version to decide board video mode.   Sascha Hauer
• [PATCH v2] rtc: i.MX dryice: Add devicetree support   Sascha Hauer
• [PATCH v3] linux,stdout-path helper   Sascha Hauer
• [PATCH 1/3] OF: Add helper for matching against linux,stdout-path   Sascha Hauer
• [PATCH 2/3] serial: i.MX: Make console support non optional   Sascha Hauer
• [PATCH 3/3] serial: i.MX: evaluate linux,stdout-path property   Sascha Hauer
• [PATCH 1/2] ARM: i.MX27: Add platform support for IRAM.   Sascha Hauer
• [PATCH resend] rtc: i.MX dryice: Add devicetree support   Sascha Hauer
• [PATCH] i.MX25 devicetree support   Sascha Hauer
• [PATCH 1/4] ARM i.MX25: Add missing clock gates   Sascha Hauer
• [PATCH 2/4] ARM i.MX25: Add devicetree support   Sascha Hauer
• [PATCH 3/4] ARM i.MX25: Add devicetree   Sascha Hauer
• [PATCH 4/4] ARM i.MX: Add Ka-Ro TX25 devicetree   Sascha Hauer
• [PATCH] i.MX IPU SoC support   Sascha Hauer
• [PATCH 1/7] ARM i.MX51: setup MIPI during startup   Sascha Hauer
• [PATCH 2/7] ARM i.MX6: fix ldb_di_sel mux   Sascha Hauer
• [PATCH 3/7] ARM i.MX5: switch IPU clk support to devicetree bindings   Sascha Hauer
• [PATCH 4/7] ARM i.MX53: Add IPU support   Sascha Hauer
• [PATCH 5/7] ARM i.MX51: Add IPU support   Sascha Hauer
• [PATCH 6/7] ARM i.MX6: Add IPU support   Sascha Hauer
• [PATCH 7/7] ARM i.MX51 babbage: Add display support   Sascha Hauer
• [PATCH] staging drm/imx: updates   Sascha Hauer
• [PATCH 1/6] staging: drm/imx: Fix YUYV support in i.MX IPUv3 base driver   Sascha Hauer
• [PATCH 2/6] staging: drm/imx: Add YVU420 support to i.MX IPUv3 base driver   Sascha Hauer
• [PATCH 3/6] staging: drm/imx: silence ipu_crtc_dpms debug message   Sascha Hauer
• [PATCH 4/6] staging: drm/imx: Add ipu_cpmem_set_yuv_interleaved()   Sascha Hauer
• [PATCH 5/6] staging: drm/imx: Add pinctrl support to parallel display driver   Sascha Hauer
• [PATCH 6/6] staging: drm/imx: Remove 300ms delay after memory reset   Sascha Hauer
• [PATCH] Fix typo in DT binding documentation for i.MX IPU3   Sascha Hauer
• [PATCH v4] Add device tree file for the armadeus apf27   Sascha Hauer
• [PATCH v2 1/2] ARM: mx27_3ds: Add VPU support   Sascha Hauer
• [PATCH v4 2/2] mx2_camera: Fix regression caused by clock conversion   Sascha Hauer
• [PATCH 1/3] OF: Add helper for matching against linux, stdout-path   Sascha Hauer
• [PATCH resend] rtc: i.MX dryice: Add devicetree support   Sascha Hauer
• [PATCH v2 1/2] ARM: mx27: Add VPU support   Sascha Hauer
• [PATCH] ARM i.MX dts: Consistently add labels to devicenodes   Sascha Hauer
• [PATCH 1/3] OF: Add helper for matching against linux, stdout-path   Sascha Hauer
• [PATCH v4] linux,stdout-path helper   Sascha Hauer
• [PATCH 1/3] OF: Add helper for matching against linux,stdout-path   Sascha Hauer
• [PATCH 2/3] serial: i.MX: Make console support non optional   Sascha Hauer
• [PATCH 3/3] serial: i.MX: evaluate linux,stdout-path property   Sascha Hauer
• [PATCH] ARM i.MX dts: Consistently add labels to devicenodes   Sascha Hauer
• [PATCH v2 1/2] ARM: mx27: Add VPU support   Sascha Hauer
• [PATCH 2/4] ARM: imx: add imx5x usbmisc clock lookups   Sascha Hauer
• [PATCH 1/2] ARM: i.MX27: Add platform support for IRAM.   Sascha Hauer
• [PATCH 2/4] ARM: imx: add imx5x usbmisc clock lookups   Sascha Hauer
• [PATCH] ARM: imx: ehci: fix host power mask bit   Sascha Hauer
• [GIT PULL] i.MX fixes for -rc   Sascha Hauer
• [GIT PULL] i.MX SoC updates   Sascha Hauer
• [GIT PULL] i.MX dt updates   Sascha Hauer
• [RFC] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Sascha Hauer
• [PATCH v2 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Sascha Hauer
• [PATCH] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Sascha Hauer
• [PATCH] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Sascha Hauer
• mtd: nand: mxc: oobfree layout?   Sascha Hauer
• [PATCH v2] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Sascha Hauer
• [PATCH] pwm support for newer i.MX   Sascha Hauer
• [PATCH 1/3] ARM i.MX53: Add pwm support   Sascha Hauer
• [PATCH 2/3] ARM i.MX51: Add pwm support   Sascha Hauer
• [PATCH 3/3] ARM i.MX6: Add pwm support   Sascha Hauer
• [PATCH] ARM i.MX6: Fix ethernet PLL clocks   Sascha Hauer
• [PATCH] ARM i.MX6: Fix ethernet PLL clocks   Sascha Hauer
• [PATCH v2] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Sascha Hauer
• [PATCH 1/4] OF: Add helper for matching against linux, stdout-path   Sascha Hauer
• [RFC] ARM: mx27: Replace clk_register_clkdev with clock DT lookup   Sascha Hauer
• [PATCH v3 1/3] ARM: imx27_visstrim_m10: Do not reserve VPU DMA pool on board file   Sascha Hauer
• [PATCH] ARM i.MX6: Fix ethernet PLL clocks   Sascha Hauer
• [PATCH] ARM i.MX6: Fix ethernet PLL clocks   Sascha Hauer
• [PATCH] i.MX6 clock   Sascha Hauer
• [PATCH 1/3] ARM i.MX6: rename PLLs according to datasheet   Sascha Hauer
• [PATCH 2/3] ARM i.MX6: Fix ethernet PLL clocks   Sascha Hauer
• [PATCH 3/3] ARM i.MX6: remove gate_mask from pllv3   Sascha Hauer
• [PATCH 2/3] ARM i.MX6: Fix ethernet PLL clocks   Sascha Hauer
• [GIT PULL] i.MX Board update   Sascha Hauer
• [GIT PULL] i.MX defconfig updates   Sascha Hauer
• [GIT PULL] i.MX SoC updates   Sascha Hauer
• [PATCH v3 3/7] usb: chipidea: usbmisc: fix a potential race condition   Sascha Hauer
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support   Sascha Hauer
• [PATCH 11/24] MAINTAINERS: fix .../plat-mxc/include/mach/imxfb.h   Sascha Hauer
• [PATCH 18/24] MAINTAINERS: remove drivers/mmc/host/imxmmc.*   Sascha Hauer
• [PATCH 3/4] imx27-dt: configure i2c1 gpio on armadeus apf27   Sascha Hauer
• [PATCH 1/4] ARM: dts: Add very basic dt support for mx31pdk   Sascha Hauer
• [PATCH 2/9] usb: chipidea: ci13xxx_imx: add 2nd and 3rd clock to support imx5x and newer   Sascha Hauer
• [PATCH 2/9] usb: chipidea: ci13xxx_imx: add 2nd and 3rd clock to support imx5x and newer   Sascha Hauer
• [PATCH 1/4] ARM: dts: Add very basic dt support for mx31pdk   Sascha Hauer
• [PATCH] ARM: eukrea_mbimx27-baseboard - use stock get_pendown_state() in ads7846   Sascha Hauer
• [PATCH v2] ARM: dts: mx27: Fix the AIPI bus for FEC   Sascha Hauer
• what's the purpose for the few bytes at the end of kernel stack   He, Dander
• [PATCH V3] mmc: omap_hsmmc: Enable HSPE bit for high speed cards   Hebbar, Gururaja
• discrepancy while save and restore of debounce registers   Hebbar, Gururaja
• [RFC PATCH v3 00/16] DMA Engine support for AM33XX   Hebbar, Gururaja
• [PATCH 0/2] ARM/ASoC: Davinci: Device Tree Update   Hebbar, Gururaja
• [PATCH 1/2] ASoC: davinci-mcasp: Add pinctrl support   Hebbar, Gururaja
• [PATCH 2/2] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Hebbar, Gururaja
• [PATCH 0/2] ARM/ASoC: Davinci: Device Tree Update   Hebbar, Gururaja
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Hebbar, Gururaja
• [PATCH 2/2] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [PATCH RESEND 0/4] spi: sh-msiof: Add DT support   Bastian Hecht
• [PATCH 1/4] spi: sh-msiof: Remove unneeded clock name   Bastian Hecht
• [PATCH 2/4] spi: Add SH Mobile series as dependency to MSIOF controller   Bastian Hecht
• [PATCH 3/4] spi: sh-msiof: Add device tree parsing to driver   Bastian Hecht
• [PATCH 4/4] devicetree: Add Renesas SH Mobile MSIOF spi controller binding doc   Bastian Hecht
• [PATCH v3 0/3] Add DMA and device tree support to the flash controller FLCTL   Bastian Hecht
• [GIT PULL v4] Renesas ARM-based SoC for v3.8   Bastian Hecht
• [kvmarm] [PATCH v3 01/13] KVM: ARM: Introduce KVM_SET_DEVICE_ADDRESS ioctl   Benjamin Herrenschmidt
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Rob Herring
• [PATCH 2/8] ARM: zynq: move ttc timer code to drivers/clocksource   Rob Herring
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Rob Herring
• [PATCH v2] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Rob Herring
• [GIT PULL] Calxeda ECX-2000 support   Rob Herring
• Building for MMU-less vexpress targets   Rob Herring
• [PATCH] cpuidle: add Calxeda SOC idle support   Rob Herring
• [PATCH] ARM: highbank: use common debug_ll_io_init   Rob Herring
• [RFC] dt/platform: Use cell-index for device naming if available   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH 01/17] of: add dma-mask binding   Rob Herring
• [PATCH 01/17] of: add dma-mask binding   Rob Herring
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Rob Herring
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Rob Herring
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Rob Herring
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Rob Herring
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   Rob Herring
• [PATCH v4 02/14] ARM: Section based HYP idmap   Rob Herring
• [GIT PULL] Highbank DEBUG_LL clean-up   Rob Herring
• [GIT PULL] Calxeda cpuidle support   Rob Herring
• [PATCH 1/2] of: Add vendor prefix for Asahi Kasei Corp.   Rob Herring
• [PATCH] ARM: Kconfig: Do not force selection of ARCH_VEXPRESS by ARCH_MULTI_V7   Rob Herring
• [PATCH v5 1/8] dt: add helper inline for retrieving timeout-sec property   Rob Herring
• [PATCH v4] Introduce irqchip infrastructure   Rob Herring
• [PATCH 06/16] ARM: gic: move register definitions into .c file   Rob Herring
• [PATCH 02/16] arm: add set_handle_irq() to register the parent IRQ controller handler function   Rob Herring
• [PATCH V4 1/3] of: introduce for_each_matching_node_and_match()   Rob Herring
• [PATCH v3 0/9] GIC and VIC clean-ups   Rob Herring
• [PATCH 1/9] arm: add set_handle_irq() to register the parent IRQ controller handler function   Rob Herring
• [PATCH 2/9] ARM: mach-ux500: use SGI0 to wake up the other core   Rob Herring
• [PATCH 3/9] ARM: GIC: remove assembly ifdefs from gic.h   Rob Herring
• [PATCH 4/9] ARM: GIC: remove direct use of gic_raise_softirq   Rob Herring
• [PATCH 5/9] ARM: GIC: set handle_arch_irq in GIC initialization   Rob Herring
• [PATCH 6/9] ARM: remove mach .handle_irq for GIC users   Rob Herring
• [PATCH 7/9] ARM: VIC: shrink down vic.h   Rob Herring
• [PATCH 8/9] ARM: VIC: set handle_arch_irq in VIC initialization   Rob Herring
• [PATCH 9/9] ARM: remove mach .handle_irq for VIC users   Rob Herring
• [PATCH v4] Introduce irqchip infrastructure   Rob Herring
• [PATCH 15/16] irqchip: vic: mark vic_of_init() as static   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH 4/9] ARM: GIC: remove direct use of gic_raise_softirq   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH v2] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH v2] ARM: implement optimized percpu variable access   Rob Herring
• [PATCH V7 1/7] kbuild: centralize .dts->.dtb rule   Rob Herring
• [PATCH V2 1/4] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Sebastian Hesselbarth
• [PATCH RFT 1/2] pinctrl: dove: Fix dove_audio1_ctrl_set when BIT(0|1|2|3) of config is clear   Sebastian Hesselbarth
• [PATCH RFT 2/2] pinctrl: dove: Checking valid config in dove_audio1_ctrl_set   Sebastian Hesselbarth
• [PATCH v2] ARM: Dove: update defconfig   Sebastian Hesselbarth
• [PATCH RFT 1/2] pinctrl: dove: Fix dove_audio1_ctrl_set when BIT(0|1|2|3) of config is clear   Sebastian Hesselbarth
• [PATCH 0/4] Dove pinctrl fixes and DT enabling   Sebastian Hesselbarth
• [PATCH 1/4] pinctrl: mvebu: fix iomem pointer for dove pinctrl   Sebastian Hesselbarth
• [PATCH 2/4] pinctrl: mvebu: Fix dove_audio1_ctrl_set function   Sebastian Hesselbarth
• [PATCH 3/4] ARM: Dove: Convert to DT GPIO and pinctrl   Sebastian Hesselbarth
• [PATCH 4/4] ARM: Dove: Add CuBox pinhog for led   Sebastian Hesselbarth
• [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT   Sebastian Hesselbarth
• [PATCH 0/4] Dove pinctrl fixes and DT enabling   Sebastian Hesselbarth
• [PATCH 3/4] ARM: Dove: Convert to DT GPIO and pinctrl   Sebastian Hesselbarth
• [PATCH 1/2] ARM: Dove: Add pinctrl clock to DT   Sebastian Hesselbarth
• [PATCH 2/2] pinctrl: mvebu: make pdma clock on dove mandatory   Sebastian Hesselbarth
• [PATCH v2 1/2] ARM: Dove: Add pinctrl clock to DT   Sebastian Hesselbarth
• [PATCH v2 2/2] pinctrl: mvebu: make pdma clock on dove mandatory   Sebastian Hesselbarth
• Fwd: [PATCHv2] Input: omap4-keypad: Add pinctrl support   Kevin Hilman
• [PATCH v2 2/2] ARM: OMAP: omap_device: Correct resource handling for DT boot   Kevin Hilman
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Kevin Hilman
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Kevin Hilman
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Kevin Hilman
• [PATCH 14/15] ARM: OMAP2+: omap2plus_defconfig: Enable Mailbox   Kevin Hilman
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Kevin Hilman
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Kevin Hilman
• [PATCH 14/15] ARM: OMAP2+: omap2plus_defconfig: Enable Mailbox   Kevin Hilman
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Kevin Hilman
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Kevin Hilman
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Kevin Hilman
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Kevin Hilman
• [PATCHv9 0/8] ARM: OMAP4: core retention support   Kevin Hilman
• [PATCHv9 6/8] ARM: OMAP4: retrigger localtimers after re-enabling gic   Kevin Hilman
• [PATCHv9 2/8] ARM: OMAP4: PM: add errata support   Kevin Hilman
• [PATCH] ARM: OMAP4: PM: fix regulator name for VDD_MPU   Kevin Hilman
• OMAP baseline test results for v3.7-rc1   Kevin Hilman
• [GIT PULL] ARM: OMAP: PM: few more fixes for v3.7-rc   Kevin Hilman
• [PATCHv7 00/21] ARM: OMAP3+: auto retention support   Kevin Hilman
• [PATCHv9 0/8] ARM: OMAP4: core retention support   Kevin Hilman
• [PATCHv9 2/8] ARM: OMAP4: PM: add errata support   Kevin Hilman
• [GIT PULL] OMAP: PM: misc. fixes for v3.8   Kevin Hilman
• [GIT PULL] OMAP: PM: cleanups for v3.8   Kevin Hilman
• [GIT PULL] OMAP: PM: SmartReflex updates for v3.8   Kevin Hilman
• [GIT PULL] OMAP: PM: voltage layer updates for v3.8   Kevin Hilman
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Kevin Hilman
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Kevin Hilman
• [PATCH] ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC   Kevin Hilman
• OMAP baseline test results for v3.7-rc4   Kevin Hilman
• OMAP baseline test results for v3.7-rc4   Kevin Hilman
• [PATCHv9 0/8] ARM: OMAP4: core retention support   Kevin Hilman
• [PATCHv2] ARM: OMAP4: USB: power down MUSB PHY during boot   Kevin Hilman
• OMAP baseline test results for v3.7-rc5   Kevin Hilman
• [PATCH v3 5/7] crypto: omap-sham: Convert to use pm_runtime API   Kevin Hilman
• [GIT PULL] ARM: OMAP4: PM: basic support for core retention in suspend   Kevin Hilman
• [PATCH] ARM: OMAP4: PM: fix errata handling when CONFIG_PM=n   Kevin Hilman
• [PATCH] ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n   Kevin Hilman
• [PATCH v2 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   Kevin Hilman
• [PATCH v2 4/4] ARM: dts: AM33XX: Enable system power off control in am335x-bone   Kevin Hilman
• [PATCH] MAINTAINERS: update email address for Kevin Hilman   Kevin Hilman
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Lauri Hintsala
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Lauri Hintsala
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Lauri Hintsala
• [PATCH v3 0/3] serial: mxs-auart: add DMA support for auart in mx28   Lauri Hintsala
• [PATCH 04/15] ARM: OMAP2+: hwmod: Update the reset API for AM33XX   Vaibhav Hiremath
• [PATCH 05/15] ARM: OMAP2+: AM33XX: Update WKUP_M3 hwmod entry for reset status   Vaibhav Hiremath
• [PATCH 07/15] ARM: OMAP2+: hwmod: Update the hwmod data for TPTCs in AM33XX   Vaibhav Hiremath
• [PATCH 06/15] ARM: OMAP2+: hwmod: Enable OCMCRAM registration in AM33XX   Vaibhav Hiremath
• [PATCH 04/15] ARM: OMAP2+: hwmod: Update the reset API for AM33XX   Hiremath, Vaibhav
• [PATCH 06/15] ARM: OMAP2+: hwmod: Enable OCMCRAM registration in AM33XX   Hiremath, Vaibhav
• OMAP baseline test results for v3.7-rc3   Hiremath, Vaibhav
• OMAP baseline test results for v3.7-rc3   Hiremath, Vaibhav
• OMAP baseline test results for v3.7-rc3   Hiremath, Vaibhav
• OMAP baseline test results for v3.7-rc3   Hiremath, Vaibhav
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Vaibhav Hiremath
• OMAP baseline test results for v3.7-rc3   Hiremath, Vaibhav
• [PATCH 3/8] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Hiremath, Vaibhav
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Hiremath, Vaibhav
• [PATCH 3/3] ARM: AM335x: Fix warning in timer.c   Vaibhav Hiremath
• [PATCH RESEND v5 0/4] OMAP GPMC DT bindings   Vaibhav Hiremath
• Decoding the PTM traces   Arve Hjønnevåg
• [RFC] arm: memtest   Alexander Holler
• [RFC] arm: memtest   Alexander Holler
• [RFC] arm: memtest   Alexander Holler
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Michael Hope
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8   Simon Horman
• [GIT PULL v3] Renesas ARM-based SoC for v3.8   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC defconfig for v3.8   Simon Horman
• [PATCH v2 1/4] ARM: shmobile: Remove G3EVM machine support   Simon Horman
• [GIT PULL v3] Renesas ARM-based SoC for v3.8   Simon Horman
• [GIT PULL v3] Renesas ARM-based SoC for v3.8   Simon Horman
• [PATCH v2 1/4] ARM: shmobile: Remove G3EVM machine support   Simon Horman
• [GIT PULL v4] Renesas ARM-based SoC for v3.8   Simon Horman
• [PATCH 01/11] ARM: shmobile: Remove SH7367 support   Simon Horman
• [PATCH 02/11] ARM: shmobile: Remove SH7377 support   Simon Horman
• [PATCH 03/11] ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode   Simon Horman
• [PATCH 04/11] ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode   Simon Horman
• [PATCH 05/11] ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode   Simon Horman
• [PATCH 06/11] ARM: shmobile: r8a7740: fixup DT machine desc name typo   Simon Horman
• [PATCH 07/11] ARM: shmobile: r8a7779: add HSPI clock support   Simon Horman
• [PATCH 08/11] ARM: shmobile: r8a7779: add I2C clock support   Simon Horman
• [PATCH 09/11] ARM: shmobile: r8a7779: add I2C driver support   Simon Horman
• [PATCH 10/11] ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372   Simon Horman
• [PATCH 11/11] ARM: shmobile: r8a7740: Enable PMU   Simon Horman
• [GIT PULL] Renesas ARM-based SoC for v3.8 #2   Simon Horman
• [PATCH 1/4] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx   Simon Horman
• [PATCH 2/4] ARM: shmobile: r8a7740: add USB24 clock explain   Simon Horman
• [PATCH 3/4] ARM: shmobile: r8a7779: add USB EHCI clock support   Simon Horman
• [PATCH 4/4] ARM: shmobile: r8a7779: add USB OHCI clock support   Simon Horman
• [GIT PULL] Renesas ARM-based SoC boards for v3.8 #2   Simon Horman
• [PATCH 1/3] ARM: shmobile: marzen: add USB phy support   Simon Horman
• [PATCH 2/3] ARM: shmobile: marzen: add USB EHCI driver support   Simon Horman
• [PATCH 3/3] ARM: shmobile: marzen: add USB OHCI driver support   Simon Horman
• [RFC 00/15] SH/ARM shmobile DT initialisation of INTC and GIC   Simon Horman
• [PATCH 01/15] ARM: shmobile: Add support OF for INTC of shmobile   Simon Horman
• [PATCH 02/15] SH: intc: Add support OF of IRQ   Simon Horman
• [PATCH 03/15] ARM: shmobile: Add support OF of INTC for r8a7740   Simon Horman
• [PATCH 04/15] ARM: shmobile: Add support OF of INTC for sh73a0   Simon Horman
• [PATCH 05/15] ARM: shmobile: Add support OF of INTC for sh7372   Simon Horman
• [PATCH 06/15] ARM: shmobile: Add DT table of INTC for sh73a0   Simon Horman
• [PATCH 07/15] ARM: shmobile: Add DT table of INTC for sh7372   Simon Horman
• [PATCH 08/15] ARM: shmobile: Add DT table of INTC for r8a7740   Simon Horman
• [PATCH 09/15] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva   Simon Horman
• [PATCH 10/15] ARM: shmobile: Include DTSI of sh73a0 to kzm9g board   Simon Horman
• [PATCH 11/15] ARM: shmobile: kzm9g: Use DT initialisation of INTC   Simon Horman
• [PATCH 12/15] ARM: shmobile: r8a7740: Use DT initialisation of INTC   Simon Horman
• [PATCH 13/15] ARM: shmobile: sh7372: Use DT initialisation of INTC   Simon Horman
• [PATCH 14/15] ARM: shmobile: Add DT table of GIC for sh73a0   Simon Horman
• [PATCH 15/15] ARM: shmobile: sh73a0: Use DT for GIC   Simon Horman
• [PATCH 06/15] ARM: shmobile: Add DT table of INTC for sh73a0   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC boards for v3.8 #2   Simon Horman
• [PATCH 1/7] ARM: shmobile: marzen: add USB phy support   Simon Horman
• [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support   Simon Horman
• [PATCH 3/7] ARM: shmobile: marzen: add USB OHCI driver support   Simon Horman
• [PATCH 4/7] sh: clkfwk: add sh_clk_fsidiv_register()   Simon Horman
• [PATCH 5/7] ARM: shmobile: sh7372: sh7372_fsidivX_clk become non-global   Simon Horman
• [PATCH 6/7] ARM: shmobile: sh7372: use sh_clk_fsidiv_register() for FSI-DIV clocks   Simon Horman
• [PATCH 7/7] ARM: shmobile: r8a7740: add FSI-DVI clocks   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC boards for v3.8 #2   Simon Horman
• [GIT PULL] Renesas ARM-based SoC for v3.8 #2   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC for v3.8 #2   Simon Horman
• [PATCH 01/10] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx   Simon Horman
• [PATCH 02/10] ARM: shmobile: r8a7740: add USB24 clock explain   Simon Horman
• [PATCH 03/10] ARM: shmobile: r8a7779: add USB EHCI clock support   Simon Horman
• [PATCH 04/10] ARM: shmobile: r8a7779: add USB OHCI clock support   Simon Horman
• [PATCH 05/10] sh: clkfwk: add sh_clk_fsidiv_register()   Simon Horman
• [PATCH 06/10] ARM: shmobile: sh7372: sh7372_fsidivX_clk become non-global   Simon Horman
• [PATCH 07/10] ARM: shmobile: sh7372: use sh_clk_fsidiv_register() for FSI-DIV clocks   Simon Horman
• [PATCH 08/10] ARM: shmobile: r8a7740: add FSI-DVI clocks   Simon Horman
• [PATCH 09/10] ARM: shmobile: add fsi external clock on r8a7740   Simon Horman
• [PATCH 10/10] ARM: shmobile: add fsi external clock sh7372   Simon Horman
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2   Simon Horman
• [PATCH 1/7] ARM: shmobile: marzen: add USB phy support   Simon Horman
• [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support   Simon Horman
• [PATCH 3/7] ARM: shmobile: marzen: add USB OHCI driver support   Simon Horman
• [PATCH 4/7] ARM: shmobile: mackerel: enable DMAEngine on USB Host   Simon Horman
• [PATCH 5/7] ARM: shmobile: use FSI driver's audio clock on armadillo800eva   Simon Horman
• [PATCH 6/7] ARM: shmobile: use FSI driver's audio clock on mackerel   Simon Horman
• [PATCH 7/7] ARM: shmobile: use FSI driver's audio clock on ap4evb   Simon Horman
• [PATCH 0/2] [GIT PULL] Renesas ARM-based 'SoC2' for v3.8 #3   Simon Horman
• [PATCH 1/2] ARM: shmobile: sh7372: remove fsidivx clock   Simon Horman
• [PATCH 2/2] ARM: shmobile: sh7372: sh7372_fsiXck_clk become non-global   Simon Horman
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2   Simon Horman
• [GIT PULL] Renesas ARM-based SoC for v3.8 #4   Simon Horman
• [PATCH 1/4] Revert "ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode"   Simon Horman
• [PATCH 2/4] Revert "ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode"   Simon Horman
• [PATCH 3/4] Revert "ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode"   Simon Horman
• [PATCH 4/4] sh: clkfwk: fixup unsed variable warning   Simon Horman
• [GIT PULL] Renesas ARM-based SoC boards for v3.8 #3   Simon Horman
• [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource   Simon Horman
• [RFC 00/15 v4] shmobile DT initialisation of INTC and GIC   Simon Horman
• [RFC 01/15] ARM: mach-shmobile: Add support OF for INTC of shmobile   Simon Horman
• [RFC 02/15] SH: intc: Add support OF of IRQ   Simon Horman
• [RFC 03/15] ARM: mach-shmobile: Add support OF of INTC for r8a7740   Simon Horman
• [RFC 04/15] ARM: mach-shmobile: Add support OF of INTC for sh73a0   Simon Horman
• [RFC 05/15] ARM: mach-shmobile: Add support OF of INTC for sh7372   Simon Horman
• [RFC 06/15] ARM: mach-shmobile: Add DT table of INTC for sh73a0   Simon Horman
• [RFC 07/15] ARM: mach-shmobile: Add DT table of INTC for sh7372   Simon Horman
• [RFC 08/15] ARM: mach-shmobile: Add DT table of INTC for r8a7740   Simon Horman
• [RFC 09/15] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva   Simon Horman
• [RFC 10/15] ARM: shmobile: Include DTSI of sh73a0 to kzm9g board   Simon Horman
• [RFC 11/15] ARM: shmobile: kzm9g: Use DT initialisation of INTC   Simon Horman
• [RFC 12/15] ARM: shmobile: r8a7740: Use DT initialisation of INTC   Simon Horman
• [RFC 13/15] ARM: shmobile: sh7372: Use DT initialisation of INTC   Simon Horman
• [RFC 14/15] ARM: shmobile: Add DT table of GIC for sh73a0   Simon Horman
• [RFC 15/15] ARM: shmobile: sh73a0: Use DT for GIC   Simon Horman
• [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC boards for v3.8 #3   Simon Horman
• [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource   Simon Horman
• [RFC 09/15] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva   Simon Horman
• [RFC 09/15] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva   Simon Horman
• [PATCH 0/7] ARM: mach-shmobile: kzm9g: Reference DT implementation   Simon Horman
• [PATCH 1/7] mmc: sh-mmcif: provide default allowed voltage   Simon Horman
• [PATCH 2/7] mmc: sdhi: enchance OF support for flags and cd-gpios   Simon Horman
• [PATCH 3/7] sh: pfc: Allow device tree registration   Simon Horman
• [PATCH 4/7] ARM: shmobile: pfc-sh73a0: Register device tree   Simon Horman
• [PATCH 5/7] ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT   Simon Horman
• [PATCH 6/7] ARM: mach-shmobile: sh73a0: Minimal setup using DT   Simon Horman
• [PATCH 7/7] ARM: mach-shmobile: kzm9g: Reference DT implementation   Simon Horman
• [PATCH 1/7] mmc: sh-mmcif: provide default allowed voltage   Simon Horman
• [PATCH 6/7] ARM: mach-shmobile: sh73a0: Minimal setup using DT   Simon Horman
• [PATCH 6/7] ARM: mach-shmobile: sh73a0: Minimal setup using DT   Simon Horman
• [PATCH 0/7] ARM: mach-shmobile: kzm9g: Reference DT implementation   Simon Horman
• [PATCH 7/7] ARM: mach-shmobile: kzm9g: Reference DT implementation   Simon Horman
• [PATCH 3/7] sh: pfc: Allow device tree registration   Simon Horman
• [PATCH] Update ARM/SHMOBILE section of MAINTAINERS   Simon Horman
• [PATCH 4/7] ARM: shmobile: pfc-sh73a0: Register device tree   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC maintainers for v3.8 #1   Simon Horman
• [PATCH] Update ARM/SHMOBILE section of MAINTAINERS   Simon Horman
• [PATCH 0/7 v2] ARM: mach-shmobile: kzm9g: Reference DT implementation   Simon Horman
• [PATCH 1/5] ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT   Simon Horman
• [PATCH 2/5] ARM: mach-shmobile: sh73a0: Minimal setup using DT   Simon Horman
• [PATCH 3/5] ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT   Simon Horman
• [PATCH 4/5] ARM: shmobile: kzm9g: use voltage regulators by default   Simon Horman
• [PATCH 5/5] ARM: mach-shmobile: kzm9g: Reference DT implementation   Simon Horman
• [PATCH 3/5] ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT   Simon Horman
• [PATCH] ARM: at91/usbh: fix overcurrent gpio setup   Johan Hovold
• [PATCH V2 0/3] ARM: tegra: add speedo identification for T20/T30   Danny Huang
• [PATCH V2 1/3] ARM: tegra: flexible spare fuse read function   Danny Huang
• [PATCH V2 2/3] ARM: tegra: Add speedo-based process identification   Danny Huang
• [PATCH V2 3/3] ARM: tegra: T30 speedo-based process identification   Danny Huang
• [PATCH 0/3] ARM: dts: OMAP4/5 device-tree timer updates   Jon Hunter
• [PATCH 1/3] ARM: dts: Update OMAP4 timer addresses   Jon Hunter
• [PATCH 2/3] ARM: dts: Add OMAP5 timer nodes   Jon Hunter
• [PATCH 3/3] ARM: dts: Add OMAP5 counter node   Jon Hunter
• [PATCH v2 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Jon Hunter
• [GIT PULL] ARM: OMAP: Timer and Counter DT Updates for v3.8   Jon Hunter
• [PATCH v2 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Jon Hunter
• [PATCH v3 0/4] RFC: OMAP GPMC DT bindings   Jon Hunter
• [PATCH v2 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Jon Hunter
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Jon Hunter
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Jon Hunter
• [PATCH v2 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Jon Hunter
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Jon Hunter
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Jon Hunter
• OMAP baseline test results for v3.7-rc4   Jon Hunter
• OMAP baseline test results for v3.7-rc4   Jon Hunter
• [PATCH 0/3] ARM: OMAP4: Clock fixes   Jon Hunter
• [PATCH 1/3] ARM: OMAP4: Update timer clock aliases   Jon Hunter
• [PATCH 2/3] ARM: OMAP4: Enhance support for DPLLs with 4X multiplier   Jon Hunter
• [PATCH 3/3] ARM: OMAP4460: Workaround ABE DPLL failing to turn-on   Jon Hunter
• [PATCH V2 00/14] ARM: OMAP: DMTIMER fixes   Jon Hunter
• [PATCH V2 01/14] ARM: OMAP: Add DMTIMER definitions for posted mode   Jon Hunter
• [PATCH V2 02/14] ARM: OMAP2+: Disable posted mode for the clocksource timer   Jon Hunter
• [PATCH V2 03/14] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Jon Hunter
• [PATCH V2 04/14] ARM: OMAP: Fix timer posted mode support   Jon Hunter
• [PATCH V2 05/14] ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations   Jon Hunter
• [PATCH V2 06/14] ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs   Jon Hunter
• [PATCH V2 07/14] ARM: OMAP2+: Don't use __omap_dm_timer_reset()   Jon Hunter
• [PATCH V2 08/14] ARM: OMAP: Fix dmtimer reset for timer1   Jon Hunter
• [PATCH V2 09/14] ARM: OMAP: Don't restore of DMTIMER TISTAT register   Jon Hunter
• [PATCH V2 10/14] ARM: OMAP: Don't restore DMTIMER interrupt status register   Jon Hunter
• [PATCH V2 11/14] ARM: OMAP: Fix spurious interrupts when using timer match feature   Jon Hunter
• [PATCH V2 12/14] ARM: OMAP: Add dmtimer interrupt disable function   Jon Hunter
• [PATCH V2 13/14] ARM: OMAP: Remove unnecessary call to clk_get()   Jon Hunter
• [PATCH V2 14/14] ARM: OMAP: Remove __omap_dm_timer_set_source function   Jon Hunter
• OMAP baseline test results for v3.7-rc4   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH V2 00/14] ARM: OMAP: DMTIMER fixes   Jon Hunter
• [PATCH 07/11] ARM: OMAP: Move omap-pm-noop.c local to mach-omap2   Jon Hunter
• [PATCH V2 01/14] ARM: OMAP: Add DMTIMER definitions for posted mode   Jon Hunter
• [PATCH V2 02/14] ARM: OMAP2+: Disable posted mode for the clocksource timer   Jon Hunter
• [PATCH V2 01/14] ARM: OMAP: Add DMTIMER definitions for posted mode   Jon Hunter
• [PATCH V2 03/14] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH V2 01/14] ARM: OMAP: Add DMTIMER definitions for posted mode   Jon Hunter
• [PATCH V2 03/14] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Jon Hunter
• [GIT PULL] ARM: OMAP: Timer and Counter DT Updates for v3.8   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [GIT PULL] ARM: OMAP: Timer and Counter DT Updates for v3.8   Jon Hunter
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Jon Hunter
• [PATCH] ARM: OMAP: Fix kernel panic in dmtimer probe   Jon Hunter
• [GIT PULL] ARM: OMAP: Timer and Counter DT Updates for v3.8   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH] ARM: OMAP: Fix kernel panic in dmtimer probe   Jon Hunter
• [PATCH] ARM: OMAP2+: Prevent redefinition errors for soc.h   Jon Hunter
• [PATCH] ARM: OMAP2+: Prevent redefinition errors for soc.h   Jon Hunter
• [PATCH V2 03/14] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Jon Hunter
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Jon Hunter
• [PATCH] ARM: OMAP2+: Prevent redefinition errors for soc.h   Jon Hunter
• [PATCH] ARM: OMAP2+: Prevent redefinition errors for soc.h   Jon Hunter
• [PATCH] ARM: OMAP2+: Prevent redefinition errors for soc.h   Jon Hunter
• [PATCH V3 00/13] ARM: OMAP: DMTIMER fixes   Jon Hunter
• [PATCH V3 01/13] ARM: OMAP: Add DMTIMER definitions for posted mode   Jon Hunter
• [PATCH V3 02/13] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Jon Hunter
• [PATCH V3 03/13] ARM: OMAP: Fix timer posted mode support   Jon Hunter
• [PATCH V3 04/13] ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations   Jon Hunter
• [PATCH V3 05/13] ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs   Jon Hunter
• [PATCH V3 06/13] ARM: OMAP2+: Don't use __omap_dm_timer_reset()   Jon Hunter
• [PATCH V3 07/13] ARM: OMAP: Fix dmtimer reset for timer1   Jon Hunter
• [PATCH V3 08/13] ARM: OMAP: Don't restore of DMTIMER TISTAT register   Jon Hunter
• [PATCH V3 09/13] ARM: OMAP: Don't restore DMTIMER interrupt status register   Jon Hunter
• [PATCH V3 10/13] ARM: OMAP: Fix spurious interrupts when using timer match feature   Jon Hunter
• [PATCH V3 11/13] ARM: OMAP: Add dmtimer interrupt disable function   Jon Hunter
• [PATCH V3 12/13] ARM: OMAP: Remove unnecessary call to clk_get()   Jon Hunter
• [PATCH V3 13/13] ARM: OMAP: Remove __omap_dm_timer_set_source function   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH V3 00/13] ARM: OMAP: DMTIMER fixes   Jon Hunter
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [GIT PULL] ARM: OMAP: DMTIMER fixes   Jon Hunter
• [PATCH 0/8] ARM: OMAP: Clean-up DMTIMER   Jon Hunter
• [PATCH 1/8] ARM: OMAP: Clean-up dmtimer reset code   Jon Hunter
• [PATCH 2/8] ARM: OMAP: Define omap_dm_timer_prepare function as static   Jon Hunter
• [PATCH 3/8] ARM: OMAP: Don't store timers physical address   Jon Hunter
• [PATCH 4/8] ARM: OMAP2+: Remove unnecessary local variable in timer code   Jon Hunter
• [PATCH 5/8] ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration   Jon Hunter
• [PATCH 6/8] ARM: OMAP: Add platform data header for DMTIMERs   Jon Hunter
• [PATCH 7/8] ARM: OMAP: Remove unnecessary inclusion of dmtimer.h   Jon Hunter
• [PATCH 8/8] ARM: OMAP: Move plat/dmtimer.h to plat-omap/dmtimer.h   Jon Hunter
• [PATCH 0/2] ARM: OMAP2420: Fix ethernet support   Jon Hunter
• [PATCH 1/2] ARM: OMAP2420: Fix ethernet support for OMAP2420 H4   Jon Hunter
• [PATCH 2/2] ARM: OMAP: Remove debug-devices.c   Jon Hunter
• [PATCH 8/8] ARM: OMAP: Move plat/dmtimer.h to plat-omap/dmtimer.h   Jon Hunter
• [PATCH 7/8] ARM: OMAP: Remove unnecessary inclusion of dmtimer.h   Jon Hunter
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Jon Hunter
• [PATCH] Remove inline from clock framework function definitions to build the kernel with GCC 4.7   Jon Hunter
• [PATCH] ARM: OMAP2+: Fix compiler warning for 32k timer   Jon Hunter
• [PATCH] ARM: OMAP2+: Fix compiler warning for 32k timer   Jon Hunter
• [PATCH] ARM: OMAP2+: Fix compiler warning for 32k timer   Jon Hunter
• [PATCH 1/1] ARM: ux500: Describe UART platform registering issues more accurately   Jon Hunter
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Jon Hunter
• [GIT PULL] ARM: OMAP: Timer Clean-up   Jon Hunter
• [PATCH v2 1/2] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Jon Hunter
• [PATCH v4 0/3] OMAP GPMC DT bindings   Jon Hunter
• [PATCH] ARM: cti: fix manipulation of debug lock registers   Jon Hunter
• OMAP* Latest build failures   Jon Hunter
• [PATCH 1/1] ARM: OMAP: fix build error in arch/arm/mach-omap2/timer.c   Jon Hunter
• [PATCH 0/3] ARM: OMAP2+: Timer build warnings and error fixes   Jon Hunter
• [PATCH 1/3] ARM: OMAP2+: Fix realtime_counter_init warning in timer.c   Jon Hunter
• [PATCH 2/3] ARM: OMAP4: Fix build error and warning in timer.c   Jon Hunter
• [PATCH 3/3] ARM: AM335x: Fix warning in timer.c   Jon Hunter
• [PATCH 1/3] ARM: OMAP2+: Fix realtime_counter_init warning in timer.c   Jon Hunter
• [PATCH 1/3] ARM: OMAP2+: Fix realtime_counter_init warning in timer.c   Jon Hunter
• [PATCH 3/3] ARM: AM335x: Fix warning in timer.c   Jon Hunter
• OMAP* Latest build failures   Jon Hunter
• [PATCH V2 0/4] ARM: OMAP2+: Timer build warnings and error fixes   Jon Hunter
• [PATCH V2 1/4] ARM: OMAP2+: Fix realtime_counter_init warning in timer.c   Jon Hunter
• [PATCH V2 2/4] ARM: OMAP4: Fix build error and warning in timer.c   Jon Hunter
• [PATCH V2 3/4] ARM: AM335x: Fix warning in timer.c   Jon Hunter
• [PATCH V2 4/4] ARM: OMAP2+: Fix sparse warnings in timer.c   Jon Hunter
• [PATCH 1/3] ARM: OMAP4: Update timer clock aliases   Jon Hunter
• [PATCH 0/3] ARM: OMAP4: Clock fixes   Jon Hunter
• [PATCH v6 1/5] ARM: OMAP: gpmc: don't create devices from initcall on DT   Jon Hunter
• [PATCH v6 4/5] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Jon Hunter
• [PATCH v6 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Jon Hunter
• [PATCH v6 4/5] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Jon Hunter
• [PATCH v6 4/5] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Jon Hunter
• [PATCH] of: dma: Fix-up for warnings !CONFIG_OF   Jon Hunter
• [PATCH] of: dma: Fix-up for warnings !CONFIG_OF   Jon Hunter
• [PATCH 0/4] Support the MX6 FEC as a PTP hardware clock   Ben Hutchings
• [PATCH v7 2/6] net: mvneta: driver for Marvell Armada 370/XP network unit   Ben Hutchings
• [PATCH v4 0/3] ocp2scp: add non-dt support   Kishon Vijay Abraham I
• [PATCH v4 1/3] drivers: bus: ocp2scp: add pdata support   Kishon Vijay Abraham I
• [PATCH v4 2/3] ARM: OMAP4: add _dev_attr_ to ocp2scp for representing usb_phy   Kishon Vijay Abraham I
• [PATCH v4 3/3] ARM: OMAP: ocp2scp: create omap device for ocp2scp   Kishon Vijay Abraham I
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Grazvydas Ignotas
• [PATCH 09/16] irqchip: Move ARM VIC to drivers/irqchip   Jamie Iles
• [PATCH 11/16] ARM: picoxcell: use common irqchip_init   Jamie Iles
• [PATCH 9/9] ARM: remove mach .handle_irq for VIC users   Jamie Iles
• [PATCH v2 1/4] ARM: shmobile: Remove G3EVM machine support   Nobuhiro Iwamatsu
• [PATCH v2 2/4] ARM: shmobile: Remove SH7367 support   Nobuhiro Iwamatsu
• [PATCH v2 3/4] ARM: shmobile: Remove G4EVM machine support   Nobuhiro Iwamatsu
• [PATCH v2 4/4] ARM: shmobile: Remove SH7377 support   Nobuhiro Iwamatsu
• [GIT PULL v3] Renesas ARM-based SoC for v3.8   Nobuhiro Iwamatsu
• [GIT PULL v3] Renesas ARM-based SoC for v3.8   Nobuhiro Iwamatsu
• [PATCH 06/15] ARM: shmobile: Add DT table of INTC for sh73a0   Nobuhiro Iwamatsu
• [PATCH 1/2] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Nobuhiro Iwamatsu
• [PATCH 1/2] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Nobuhiro Iwamatsu
• [PATCH 1/2] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Nobuhiro Iwamatsu
• [PATCH] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Nobuhiro Iwamatsu
• [PATCH] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Nobuhiro Iwamatsu
• [PATCH] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Nobuhiro Iwamatsu
• [PATCH v5 00/15] shmobile DT initialisation of INTC and GIC   Nobuhiro Iwamatsu
• [PATCH v5 01/15] ARM: mach-shmobile: Add support OF for INTC of shmobile   Nobuhiro Iwamatsu
• [PATCH v5 02/15] SH: intc: Add support OF of IRQ   Nobuhiro Iwamatsu
• [PATCH v5 03/15] ARM: mach-shmobile: Add support OF of INTC for r8a7740   Nobuhiro Iwamatsu
• [PATCH v5 04/15] ARM: mach-shmobile: Add support OF of INTC for sh73a0   Nobuhiro Iwamatsu
• [PATCH v5 05/15] ARM: mach-shmobile: Add support OF of INTC for sh7372   Nobuhiro Iwamatsu
• [PATCH v5 06/15] ARM: mach-shmobile: Add DT table of INTC for sh73a0   Nobuhiro Iwamatsu
• [PATCH v5 07/15] ARM: mach-shmobile: Add DT table of INTC for sh7372   Nobuhiro Iwamatsu
• [PATCH v5 08/15] ARM: mach-shmobile: Add DT table of INTC for r8a7740   Nobuhiro Iwamatsu
• [PATCH v5 09/15] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva   Nobuhiro Iwamatsu
• [PATCH v5 10/15] ARM: shmobile: Include DTSI of sh73a0 to kzm9g board   Nobuhiro Iwamatsu
• [PATCH v5 11/15] ARM: shmobile: kzm9g: Use DT initialisation of INTC   Nobuhiro Iwamatsu
• [PATCH v5 12/15] ARM: shmobile: r8a7740: Use DT initialisation of INTC   Nobuhiro Iwamatsu
• [PATCH v5 13/15] ARM: shmobile: sh7372: Use DT initialisation of INTC   Nobuhiro Iwamatsu
• [PATCH v5 14/15] ARM: shmobile: Add DT table of GIC for sh73a0   Nobuhiro Iwamatsu
• [PATCH v5 15/15] ARM: shmobile: sh73a0: Use DT for GIC   Nobuhiro Iwamatsu
• [PATCH shmobile/DT 1/2] ARM: shmobile: Remove some of_sh_intc_* functions   Nobuhiro Iwamatsu
• [PATCH shmobile/DT 2/2] ARM: shmobile: Update document for sh_intc of DT   Nobuhiro Iwamatsu
• [PATCH] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Nobuhiro Iwamatsu
• [PATCH 1/3] ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6   Nobuhiro Iwamatsu
• [PATCH 1/3] ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6   Nobuhiro Iwamatsu
• [PATCH 2/3] ARM: kirkwood: Add NAND partiton map for OpenBlocks A6   Nobuhiro Iwamatsu
• [PATCH 3/3] ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6   Nobuhiro Iwamatsu
• [PATCH] ARM: kirkwood: Add support DT of second I2C bus   Nobuhiro Iwamatsu
• [PATCH] ARM: Kirkwood: Add support LED of OpenBlocks A6   Nobuhiro Iwamatsu
• [PATCH] ARM: Kirkwood: Add support LED of OpenBlocks A6   Nobuhiro Iwamatsu
• [PATCH v2] ARM: Kirkwood: Add support LED of OpenBlocks A6   Nobuhiro Iwamatsu
• [PATCH v5 00/15] shmobile DT initialisation of INTC and GIC   Nobuhiro Iwamatsu
• OMAP baseline test results for v3.7-rc3   Mark Jackson
• OMAP baseline test results for v3.7-rc3   Mark Jackson
• OMAP baseline test results for v3.7-rc3   Mark Jackson
• OMAP baseline test results for v3.7-rc3   Mark Jackson
• OMAP baseline test results for v3.7-rc3   Mark Jackson
• pxa27x_keypad status   Robert Jarzmik
• pxa27x_keypad status   Robert Jarzmik
• Test of arm_timer_rework   Robert Jarzmik
• [PATCH] ARM: pxa: pxa27x.c: add dummy SA1100 rtc clock   Robert Jarzmik
• [PATCH 2/4] rtc: pxa: fix rtc caculation issue   Robert Jarzmik
• [PATCH 4/4] rtc: pxa: request rtc irqs when probe/remove the device   Robert Jarzmik
• [PATCH] ARM: Exynos: Remove unused non-dt support for dwmci controller   Seungwon Jeon
• [PATCH for soc] socfpga: map uart into virtual address space so that early_printk() works   Olof Johansson
• [PATCH V4 REPOST] ARM: implement debug_ll_io_init()   Olof Johansson
• [PATCH v2] arm: mvebu: support for the PlatHome OpenBlocks AX3-4 board   Olof Johansson
• [GIT PULL 1/3] omap plat header removal for v3.8 merge window, part2   Olof Johansson
• [GIT PULL 2/3] omap plat header removal for v3.8 merge window, part3   Olof Johansson
• [GIT PULL 3/3] omap prcm cleanup for v3.8 merge window, part1   Olof Johansson
• [GIT PULL][for 3.7] pull request from upload/fix in arch-pxa git tree   Olof Johansson
• [GIT PULL][for 3.8] pull request from upload/board in arch-pxa git tree   Olof Johansson
• [GIT PULL v3] Renesas ARM-based SoC boards for v3.8   Olof Johansson
• [GIT PULL 1/6] DaVinci fixes for v3.8   Olof Johansson
• [GIT PULL v2] Renesas ARM-based SoC defconfig for v3.8   Olof Johansson
• [GIT PULL v4] Renesas ARM-based SoC for v3.8   Olof Johansson
• [PATCH 00/15] ARM: Patchset for CLPS711X   Olof Johansson
• [GIT PULL] Calxeda ECX-2000 support   Olof Johansson
• [PATCH] ARM: highbank: retry wfi on reset request   Olof Johansson
• [GIT PULL] Next batch of ux500 related patches due for -next   Olof Johansson
• [GIT PULL] ARM: tegra: fixes for 3.7-rc4   Olof Johansson
• [PATCH] irqchip: irq-bcm2835: Add terminating entry for of_device_id table   Olof Johansson
• [GIT PULL] Integrator & Versatile IRQchip changes   Olof Johansson
• [GIT PULL] kill plat-nomadik and convert Nomadik+Ux500 to SPARSE_IRQ   Olof Johansson
• [GIT PULL] arm-soc: Xilinx zynq changes for v3.8   Olof Johansson
• [GIT PULL 2/6] DaVinci cleanup for v3.8   Olof Johansson
• [GIT PULL] Calxeda ECX-2000 support   Olof Johansson
• [GIT PULL] at91: fixes for 3.7-rc6   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.7-rc   Olof Johansson
• [GIT PULL] at91: fixes for 3.7-rc7   Olof Johansson
• [GIT PULL] DaVinci fix for v3.7   Olof Johansson
• [GIT PULL 4/6] DaVinci DT updates for v3.8   Olof Johansson
• [GIT PULL 6/6] DaVinci defconfig updates for v3.8   Olof Johansson
• [PATCH V6] Add support for generic BCM SoC chipsets   Olof Johansson
• [PATCH 2/2] ARM: dts: snow: Add board dts file for Snow board (ARM Chromebook)   Olof Johansson
• [PATCH 1/2] ARM: dts: exynos: Move the dwmmc aliases from smdk5250 dts to exynos   Olof Johansson
• [GIT PULL] ARM: sunxi: Add basic support for Allwinner SoCs   Olof Johansson
• [PATCH v3 00/18] ARM: Patchset for CLPS711X   Olof Johansson
• [PATCH v3 14/18] ARM: clps711x: Moving backlight controls of framebuffer driver to the board   Olof Johansson
• [GIT PULL v2] at91: fixes for 3.7-rc7   Olof Johansson
• [GIT PULL] at91: header fix for 3.8   Olof Johansson
• [GIT PULL] at91: tiny cleanup for 3.8   Olof Johansson
• [GIT PULL v2] Renesas ARM-based SoC boards for v3.8 #3   Olof Johansson
• [PATCH 0/3] ARM: zynq: ARCH_MULTIPLATFORM support   Olof Johansson
• [PATCH 1/2] ARM: EXYNOS: Add aliases for i2c controller for exynos4   Olof Johansson
• [PATCH] ARM: exynos: add UART3 to DEBUG_LL ports   Olof Johansson
• [PATCH v3 0/9] GIC and VIC clean-ups   Olof Johansson
• [GIT PULL][for 3.8] pull request from arch-pxa tree on armsoc/fix branch   Olof Johansson
• [GIT PULL][for 3.8] pull request from arch-pxa tree on armsoc/board branch   Olof Johansson
• [GIT PULL 1/6] ARM: tegra: cleanup for 3.8   Olof Johansson
• [GIT PULL 1/3] ARM: bcm2835: cleanup   Olof Johansson
• [GIT PULL] arm-soc: lpc32xx: dts update   Olof Johansson
• [PATCH] mfd: vexpress-sysreg: Remove LEDs code   Olof Johansson
• [PATCH] mfd: vexpress-sysreg: Remove LEDs code   Olof Johansson
• [GIT PULL] Highbank DEBUG_LL clean-up   Olof Johansson
• [GIT PULL] Calxeda cpuidle support   Olof Johansson
• [GIT PULL] ST-Ericsson Device Tree patches   Olof Johansson
• [PATCH v3 00/18] ARM: Patchset for CLPS711X   Olof Johansson
• [PATCH v3 00/18] ARM: Patchset for CLPS711X   Olof Johansson
• [GIT PULL 1/7] Samsung cleanup for v3.8   Olof Johansson
• [GIT PULL] ARM: sunxi: support for sun4i (A10) SoCs   Olof Johansson
• [GIT PULL] arm-soc: Xilinx zynq multiplatform changes for v3.8   Olof Johansson
• [PATCH 00/14] ARM: SPEAr: DT updates   Olof Johansson
• [GIT PULL] few omap regression fixes for v3.7-rc5   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.7   Olof Johansson
• [GIT PULL] Samsung fixes-3 for v3.7   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.7 (one more)   Olof Johansson
• [PATCH] cpuidle: add Calxeda SOC idle support   Olof Johansson
• OMAP build now completely broken in latest arm-soc   Olof Johansson
• OMAP build now completely broken in latest arm-soc   Olof Johansson
• [GIT PULL 1/5] ARM: orion: fixes for v3.8   Olof Johansson
• [GIT PULL] mxs device tree changes for 3.8 (take 2)   Olof Johansson
• [GIT PULL] i.MX Board update   Olof Johansson
• [GIT PULL] i.MX defconfig updates   Olof Johansson
• [GIT PULL] i.MX SoC updates   Olof Johansson
• [GIT PULL][for 3.8] pull request from arch pxa tree on armsoc/fix   Olof Johansson
• [GIT PULL 1/3] Samsung devel-2 for v3.8   Olof Johansson
• [GIT PULL 2/3] Samsung dt-2 for v3.8   Olof Johansson
• [GIT PULL 3/3] Samsung exynos5440 for v3.8   Olof Johansson
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Olof Johansson
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Olof Johansson
• [GIT PULL 4/5] ARM: orion: dt for v3.8   Olof Johansson
• [GIT PULL 3/5] ARM: orion: boards for v3.8   Olof Johansson
• [GIT PULL 2/5] ARM: orion: cleanup for v3.8   Olof Johansson
• [GIT PULL 4/5] ARM: orion: dt for v3.8   Olof Johansson
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Olof Johansson
• [GIT PULL] ARM: ixp4xx: fixes for v3.7   Olof Johansson
• [GIT PULL] ARM: ixp4xx: fixes for v3.7   Olof Johansson
• [PATCH] ARM: EXYNOS: Avoid early use of of_machine_is_compatible()   Olof Johansson
• [PATCH] ARM: EXYNOS: Avoid early use of of_machine_is_compatible()   Olof Johansson
• [PATCH V7 2/7] ARM: dt: change .dtb build rules to build in dts directory   Olof Johansson
• [PATCH] ARM: EXYNOS: Avoid early use of of_machine_is_compatible()   Olof Johansson
• [PATCH] ARM: EXYNOS: Avoid early use of of_machine_is_compatible()   Olof Johansson
• [PATCH 2/2] i2c-s3c2410: Add bus arbitration implementation   Olof Johansson
• [GIT PULL 1/3] omap late timer clean-up (and a warning fix) for v3.8 merge window   Olof Johansson
• [GIT PULL 3/3] omap late multiplatform cleanup for v3.8 merge window   Olof Johansson
• [GIT PULL 2/3] omap late prcm changes for v3.8 merge window   Olof Johansson
• [GIT PULL] ARM: final SoC fixes for 3.7   Olof Johansson
• [GIT PULL 1/3] omap late timer clean-up (and a warning fix) for v3.8 merge window   Olof Johansson
• [GIT PULL 1/7] Samsung fixes for v3.7   Olof Johansson
• [GIT PULL v2] Renesas ARM-based SoC maintainers for v3.8 #1   Olof Johansson
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Olof Johansson
• [GIT PULL] ARM: mvebu: cache-l2x0 for v3.8   Olof Johansson
• [GIT PULL 6/7] Samsung devel-3 for v3.8   Olof Johansson
• [GIT PULL 1/7] Samsung fixes for v3.7   Olof Johansson
• [PATCH] ARM: sunxi: add missing include for mdelay()   Olof Johansson
• [PATCH] irq: versatile: delete dangling variable   Olof Johansson
• [GIT PULL] Next batch of ux500 related patches due for -next   Lee Jones
• [PATCH 1/9] ARM: integrator: Remove unused icst_params lclk_params structure   Lee Jones
• [PATCH 2/9] ARM: at91: Remove unused struct at91sam9g45_isi_device and its resources   Lee Jones
• [PATCH 2/9] ARM: at91: Remove unused struct at91sam9g45_isi_device and its resources   Lee Jones
• [PATCH 2/9] ARM: at91: Remove unused struct at91sam9g45_isi_device and its resources   Lee Jones
• [PATCH 0/8] mfd: Batch together MFD related patches   Lee Jones
• [PATCH 1/8] mfd: ab8500-core: Remove unused ab8500-gpio IRQ ranges   Lee Jones
• [PATCH 2/8] mfd: Prevent STMPE from abusing mfd_add_devices' irq_base parameter   Lee Jones
• [PATCH 3/8] mfd: Provide the STMPE driver with its own IRQ domain   Lee Jones
• [PATCH 4/8] mfd: Correct copy and paste mistake in stmpe   Lee Jones
• [PATCH 5/8] mfd: Enable the STMPE MFD for Device Tree   Lee Jones
• [PATCH 6/8] Documentation: Describe bindings for STMPE Multi-Functional Device driver   Lee Jones
• [PATCH 7/8] mfd: ab8500-core: Use devm_* memory/IRQ and allocation/free routines   Lee Jones
• [PATCH 8/8] mfd: Differentiate between u8500 and u9540 TCDM address mapping   Lee Jones
• [PATCH 1/8] mfd: ab8500-core: Remove unused ab8500-gpio IRQ ranges   Lee Jones
• [PATCH 1/1] regulator: gpio-regulator: fix crash when no states property in dt   Lee Jones
• [PATCH] mmc: Standardise capability type   Lee Jones
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Lee Jones
• [PATCH 1/1] ARM: ux500: Describe UART platform registering issues more accurately   Lee Jones
• [PATCH 0/2] Boottime: measure bootloader and kernel bootup time   Lee Jones
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH 2/2] clocksource: clksrc-dbx500-prcmu: Add boottime support   Lee Jones
• [PATCH 0/2] Boottime: measure bootloader and kernel bootup time   Lee Jones
• [GIT PULL] Ux500 pin changes   Lee Jones
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH 1/1] ARM: ux500: Describe UART platform registering issues more accurately   Lee Jones
• [PATCH 1/2] ARM: ux500: Disable the MMCI gpio-regulator by default   Lee Jones
• [PATCH 2/2] ARM: ux500: Move board specific GPIO info out to subordinate DTS files   Lee Jones
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH 4/4] pinctrl: nomadik: Prevent NULL dereference if of_match_device returns NULL   Lee Jones
• [PATCH] pinctrl: nomadik: Staticize non-exported symbols   Lee Jones
• [PATCH] mmc: Standardise capability type   Lee Jones
• [PATCH] mmc: Standardise capability type   Lee Jones
• [PATCH 1/2] ARM: ux500: Disable the MMCI gpio-regulator by default   Lee Jones
• [PATCH 2/2] ARM: ux500: Move board specific GPIO info out to subordinate DTS files   Lee Jones
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [GIT PULL] ST-Ericsson Device Tree patches   Lee Jones
• [PATCH 1/1] ARM: cache-l2x0: Fix compile time warnings when !CONFIG_OF   Lee Jones
• [PATCH 1/2] input: gpio-keys: Disable hardware on suspend   Lee Jones
• [PATCH 2/2] input: gpio-keys: Add runtime support   Lee Jones
• [RESENDING] [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [PATCH 2/2] input: gpio-keys: Add runtime support   Lee Jones
• [PATCH 1/1] ARM: cache-l2x0: Fix compile time warnings when !CONFIG_OF   Lee Jones
• [PATCH 1/1] ARM: ux500: Rename dbx500 cpufreq code to be more generic   Lee Jones
• [RESENDING] [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [PATCH] mfd: ab8500: add static linkage for battery info   Lee Jones
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Lee Jones
• [PATCH] mfd: ab8500: add static linkage for battery info   Lee Jones
• [PATCH 1/1] gpio: Provide the STMPE GPIO driver with its own IRQ Domain   Lee Jones
• [PATCH 1/1] mfd: Simplify IRQ domain registration code in STMPE   Lee Jones
• [PATCH 1/1] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [PATCH 1/1] gpio: Provide the STMPE GPIO driver with its own IRQ Domain   Lee Jones
• [PATCH 1/1] mfd: Simplify IRQ domain registration code in STMPE   Lee Jones
• [PATCH 1/2] input: gpio-keys: Disable hardware on suspend   Lee Jones
• [GIT PULL] ST-Ericsson Device Tree patches   Lee Jones
• [GIT PULL] ST-Ericsson Device Tree patches   Lee Jones
• [PATCH 1/1] ARM: ux500: Fix u9540 booting issues   Lee Jones
• [GIT PULL v3] ST-Ericsson Device Tree patches   Lee Jones
• [PATCH 1/1] ARM: ux500: Fix u9540 booting issues   Lee Jones
• [PATCH 0/3] Input: bu21013_ts - fixups and DT enablement   Lee Jones
• [PATCH 1/3] Input: bu21013_ts - Request a regulator that actually exists   Lee Jones
• [PATCH 2/3] Input: bu21013_ts - Move GPIO init and exit functions into the driver   Lee Jones
• [PATCH 3/3] Input: bu21013_ts - Add support for Device Tree booting   Lee Jones
• [PATCH 1/3] Input: bu21013_ts - Request a regulator that actually exists   Lee Jones
• [PATCH 3/3] Input: bu21013_ts - Add support for Device Tree booting   Lee Jones
• [PATCH 3/3] Input: bu21013_ts - Add support for Device Tree booting   Lee Jones
• [PATCH 3/3] Input: bu21013_ts - Add support for Device Tree booting   Lee Jones
• [PATCH 3/3] Input: bu21013_ts - Add support for Device Tree booting   Lee Jones
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Lee Jones
• [PATCH] ab8500: remove explicit handling of battery type   Lee Jones
• [PATCH 1/1] mfd: Simplify IRQ domain registration code in STMPE   Lee Jones
• [PATCH 1/1] gpio: Provide the STMPE GPIO driver with its own IRQ Domain   Lee Jones
• [PATCH 1/1] ARM: ux500: Change IRQ from low-to-high edge triggered to high-to-low   Lee Jones
• [PATCH v2 09/12] iommu/exynos: add supoort for runtime pm and suspend/resume   Prathyush K
• [RFC PATCH 3.7.0-rc4] ARM:smp: introduce smp_notify_cpu_stop to fix kexec smp case   Srinivas KANDAGATLA
• [RFC PATCH 3.7.0-rc4] ARM:smp: introduce smp_notify_cpu_stop to fix kexec smp case   Srinivas KANDAGATLA
• [RFC PATCH 3.7.0-rc4] ARM:smp: introduce smp_notify_cpu_stop to fix kexec smp case   Srinivas KANDAGATLA
• [PATCH 00/10] serial: sh-sci fixes - console PM, SCIFB, SMP lockup, etc.   Greg KH
• [PATCH v2 00/10] serial: sh-sci fixes - console PM, SCIFB, SMP lockup, etc.   Greg KH
• [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata   Greg KH
• sysfs crashes while recursively checking file permissions   Greg KH
• [PATCH] Revert "serial: omap: fix software flow control"   Greg KH
• [PATCH 01/27] usb: gadget: mv_udc: use udc_start and udc_stop functions   Greg KH
• [PATCH 01/27] usb: gadget: mv_udc: use udc_start and udc_stop functions   Greg KH
• linux-next: manual merge of the arm-soc tree with the driver-core tree   Greg KH
• Decoding the PTM traces   Arun KS
• Decoding the PTM traces   Arun KS
• Decoding the PTM traces   Arun KS
• Decoding the PTM traces   Arun KS
• [PATCH] [TRIVIAL] ARM: cns3xxx: drop unnessesary symbol selection   Imre Kaloz
• [PATCH] [TRIVIAL] ARM: cns3xxx: drop unnessesary symbol selection   Imre Kaloz
• [PATCH] arm: orion5x: convert Netgear WNR854T to device tree   Imre Kaloz
• [PATCH] arm: orion5x: convert Netgear WNR854T to device tree   Imre Kaloz
• [PATCH 1/1] ARM: mm: Remove unused variable in mmap.c   Sachin Kamat
• No subject   Abhimanyu Kapur
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Abhimanyu Kapur
• [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver   Murali Karicheri
• [PATCH v3 04/11] clk: davinci - add pll divider clock driver   Murali Karicheri
• [PATCH v3 04/11] clk: davinci - add pll divider clock driver   Murali Karicheri
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Murali Karicheri
• [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver   Murali Karicheri
• [PATCH v3 05/11] clk: davinci - add dm644x clock initialization   Murali Karicheri
• [PATCH v3 10/11] ARM: davinci - migrate to common clock   Murali Karicheri
• [PATCH v3 06/11] clk: davinci - add build infrastructure for DaVinci clock drivers   Murali Karicheri
• [PATCH v3 07/11] ARM: davinci - restructure header files for common clock migration   Murali Karicheri
• [PATCH v3 07/11] ARM: davinci - restructure header files for common clock migration   Murali Karicheri
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Murali Karicheri
• [PATCH v3 05/11] clk: davinci - add dm644x clock initialization   Murali Karicheri
• [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver   Murali Karicheri
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Murali Karicheri
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   Srinidhi Kasagar
• Fwd: [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Srinidhi Kasagar
• Fwd: [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Srinidhi Kasagar
• Fwd: [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Srinidhi Kasagar
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   Srinidhi Kasagar
• [PATCH v3 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Kasatkin, Dmitry
• [PATCH v3 3/7] ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod   Kasatkin, Dmitry
• [PATCH v3 7/7] crypto: omap_sham: Remove usage of private DMA API   Kasatkin, Dmitry
• [PATCH v3 7/7] crypto: omap_sham: Remove usage of private DMA API   Kasatkin, Dmitry
• [PATCH 0/7] crypto: omap-aes updates   Kasatkin, Dmitry
• [PATCH] backlight: corgi_lcd: Fix WARN_ON() when calling corgi_bl_set_intensity.   Marko Katić
• [ARM] head.S change broke platform device registration?   Marko Katić
• [ARM] head.S change broke platform device registration?   Marko Katić
• [ARM] head.S change broke platform device registration?   Marko Katić
• [ARM] head.S change broke platform device registration?   Marko Katić
• [ARM] head.S change broke platform device registration?   Marko Katić
• [PATCH 0/5] PM Fixes for exynos5   Abhilash Kesavan
• [PATCH 1/5] ARM: EXYNOS: fix the hotplug for Cortex-A15   Abhilash Kesavan
• [PATCH 2/5] ARM: EXYNOS5: Add support for rtc wakeup   Abhilash Kesavan
• [PATCH 3/5] ARM: EXYNOS: Fix soft reboot hang after suspend/resume   Abhilash Kesavan
• [PATCH 4/5] ARM: EXYNOS5: Remove scu_enable from cpuidle   Abhilash Kesavan
• [PATCH 5/5] ARM: EXYNOS5: Add flush_cache_all in suspend finisher   Abhilash Kesavan
• [PATCH] ARM: EXYNOS5: Fix system register base address   Abhilash Kesavan
• [PATCH RFC] ARM: EXYNOS5: Setup legacy i2c controller interrupts on SMDK5250   Abhilash Kesavan
• [PATCH RFC] ARM: EXYNOS5: Setup legacy i2c controller interrupts on SMDK5250   Abhilash Kesavan
• [PATCH RFC] ARM: EXYNOS5: Setup legacy i2c controller interrupts on SMDK5250   Abhilash Kesavan
• [PATCH 0/3] Legacy I2C controller fixes for exynos5   Abhilash Kesavan
• [PATCH 1/3] ARM: EXYNOS5: Setup legacy i2c controller interrupts on SMDK5250   Abhilash Kesavan
• [PATCH 2/3] ARM: EXYNOS5: Add aliases for i2c controller   Abhilash Kesavan
• [PATCH 3/3] ARM: EXYNOS5: Fix i2c suspend/resume for legacy controller   Abhilash Kesavan
• [PATCH] dt: Document: Add optional dw_mmc pm bindings   Abhilash Kesavan
• [PATCH] mmc: dw_mmc: Add sdio power bindings   Abhilash Kesavan
• [PATCH] ARM: EXYNOS5: Add arm down clock support   Abhilash Kesavan
• [PATCH] ARM: DTS: CROS5250: Add max77686 device tree support   Abhilash Kesavan
• [PATCH] ARM: DTS: CROS5250: Add max77686 device tree support   Abhilash Kesavan
• Libertas/SDIO(8686) and Freescale mx5   Teemu Keskinarkaus
• [PATCH linux-next] ARM64: dma-mapping: support debug_dma_mapping_error   Shuah Khan
• [PATCH linux-next] ARM64: dma-mapping: support debug_dma_mapping_error   Shuah Khan
• [PATCH 0/9] dma_debug: add debug_dma_mapping_error support to architectures that support DMA_DEBUG_API   Shuah Khan
• [PATCH 1/9] ARM64: dma_debug: add debug_dma_mapping_error support   Shuah Khan
• [PATCH 2/9] c6x: dma_debug: add debug_dma_mapping_error support   Shuah Khan
• [PATCH 3/9] ia64: dma_debug: add debug_dma_mapping_error support   Shuah Khan
• [PATCH 4/9] microblaze: dma-mapping: support debug_dma_mapping_error   Shuah Khan
• [PATCH 5/9] mips: dma_debug: add debug_dma_mapping_error support   Shuah Khan
• [PATCH 6/9] powerpc: dma_debug: add debug_dma_mapping_error support   Shuah Khan
• [PATCH 7/9] sh: dma_debug: add debug_dma_mapping_error support   Shuah Khan
• [PATCH 8/9] sparc: dma_debug: add debug_dma_mapping_error support   Shuah Khan
• [PATCH 9/9] tile: dma_debug: add debug_dma_mapping_error support   Shuah Khan
• [PATCH 0/9] dma_debug: add debug_dma_mapping_error support to architectures that support DMA_DEBUG_API   Shuah Khan
• [RFC PATCH] ARM: OMAP4: ID: Improve features detection and check   Ivan Khoronzhuk
• [PATCH] ARM: OMAP4: ID: Improve features detection and check   Ivan Khoronzhuk
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• [PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support   Vasily Khoruzhick
• pxa27x_keypad status   Vasily Khoruzhick
• Kernel uncompression error   Vasily Khoruzhick
• Kernel uncompression error   Vasily Khoruzhick
• s3c2410 (Linux 2.6.36) Incorrect DRAM size   Vasily Khoruzhick
• [PATCH 1/2] leds: Add generic support for memory mapped LEDs   Vasily Khoruzhick
• [RFC PATCH 0/3] introduce static_vm for ARM-specific static mapped area   JoonSoo Kim
• [RFC PATCH 0/3] introduce static_vm for ARM-specific static mapped area   Joonsoo Kim
• [RFC PATCH 1/3] ARM: vmregion: remove vmregion code entirely   Joonsoo Kim
• [RFC PATCH 2/3] ARM: static_vm: introduce an infrastructure for static mapped area   Joonsoo Kim
• [RFC PATCH 3/3] ARM: mm: use static_vm for managing static mapped areas   Joonsoo Kim
• [PATCH v2 0/3] introduce static_vm for ARM-specific static mapped area   Joonsoo Kim
• [PATCH v2 1/3] ARM: vmregion: remove vmregion code entirely   Joonsoo Kim
• [PATCH v2 2/3] ARM: static_vm: introduce an infrastructure for static mapped area   Joonsoo Kim
• [PATCH v2 3/3] ARM: mm: use static_vm for managing static mapped areas   Joonsoo Kim
• [PATCH v2] ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore   Kukjin Kim
• [PATCH] ARM: dts: exynos4: Add support for Exynos4x12 SoCs   Kukjin Kim
• [PATCH 6/7] pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC   Kukjin Kim
• [PATCH] ARM: Fix the "WFI" instruction opcode definition.   Kukjin Kim
• [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board   Kukjin Kim
• [PATCH] ARM: Exynos: remove unused init_uarts callback for exynos4x12 platforms   Kukjin Kim
• [PATCH] ARM: Exynos: remove unused init_uarts callback for exynos4x12 platforms   Kukjin Kim
• [PATCH] ARM: dts: exynos4: Add support for Exynos4x12 SoCs   Kukjin Kim
• [PATCH 2/4] gpio: samsung: Skip registration if pinctrl driver is present on Exynos4x12   Kukjin Kim
• [PATCH 2/4] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC   Kukjin Kim
• [PATCH] ARM: EXYNOS5: Remove wrongly placed usb2.0 PHY_CFG definition from PMU_REG   Kukjin Kim
• [PATCH] ARM: EXYNOS: Make s3c_device_i2c0 always use id 0   Kukjin Kim
• [PATCH] ARM: dts: exynos4: Add support for Exynos4x12 SoCs   Kukjin Kim
• [PATCH] ARM: S3C64XX: Statically define parent clock of the "camera" clock   Kukjin Kim
• [PATCH v2] ARM: EXYNOS: origen: Add missing USB regulators   Kukjin Kim
• [PATCH 2/4] gpio: samsung: Skip registration if pinctrl driver is present on Exynos4x12   Kukjin Kim
• [PATCH 2/4] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC   Kukjin Kim
• [PATCH v2 1/6] ARM: EXYNOS5: Clock settings for SATA and SATA PHY   Kukjin Kim
• [PATCH v2 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Kukjin Kim
• [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Remove duplicated camera clock   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Staticly define parent clock of "camera" clock   Kukjin Kim
• [PATCH 2/4] gpio: samsung: Skip registration if pinctrl driver is present on Exynos4x12   Kukjin Kim
• [PATCH v3 0/6] ARM: EXYNOS: Add secure firmware support   Kukjin Kim
• Build failure: OMAP4430 failed due to exynos4 pinctrl   Kukjin Kim
• [PATCH 1/7 v2] ARM: EXYNOS: add support for EXYNOS5440 SoC   Kukjin Kim
• [PATCH 1/7] ARM: EXYNOS: add support for EXYNOS5440 SoC   Kukjin Kim
• [PATCH 0/7] ARM: remove init_consistent_dma_size() stub   Kukjin Kim
• Build failure: OMAP4430 failed due to exynos4 pinctrl   Kukjin Kim
• [PATCH v2 2/5] clk: exynos4: register clocks using common clock framework   Kukjin Kim
• [PATCH v2 5/5] ARM: Exynos4: Migrate clock support to common clock framework   Kukjin Kim
• [PATCH v2 5/5] ARM: Exynos4: Migrate clock support to common clock framework   Kukjin Kim
• Final call for 3.8 arm-soc patches   Kukjin Kim
• [PATCH] ARM: EXYNOS: Add support for ORIGEN4QUAD board   Kukjin Kim
• [PATCH v3 0/4] ARM: EXYNOS: Power domain DT support extension   Kukjin Kim
• [PATCH v3] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support   Kukjin Kim
• [PATCH] ARM: dts: exynos4: Use drive strength 3 for SD pins   Kukjin Kim
• [PATCH 0/5] ARM: dts: exynos4210-trats: Device tree extension   Kukjin Kim
• [PATCH 1/5] ARM: EXYNOS: fix the hotplug for Cortex-A15   Kukjin Kim
• [PATCH] ARM: Exynos5: Remove i2c0 resource information and setting of device names   Kukjin Kim
• [PATCH 0/3] Legacy I2C controller fixes for exynos5   Kukjin Kim
• [PATCH] ARM: dts: exynos4: Use drive strength 3 for SD pins   Kukjin Kim
• [PATCH 00/10] ARM: S3C24XX: rework irq handling for a later dt usage   Kukjin Kim
• [PATCH] ARM: S3C64XX: Add missing device selects for Cragganmore   Kukjin Kim
• [PATCH] ARM: dts: exynos4210-trats: Remove broken-voltage property from sdhci node   Kukjin Kim
• [PATCH] ARM: EXYNOS5: Add arm down clock support   Kukjin Kim
• [PATCH 2/4] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC   Kukjin Kim
• [PATCH] ARM: SAMSUNG: use devm_ functions for ADC driver   Kukjin Kim
• [PATCH v2 1/6] ARM: EXYNOS5: Clock settings for SATA and SATA PHY   Kukjin Kim
• [PATCH v2 2/6] ARM: EXYNOS5: DT Support for SATA and SATA PHY   Kukjin Kim
• [GIT PULL] Samsung fixes-3 for v3.7   Kukjin Kim
• [GIT PULL 1/7] Samsung cleanup for v3.8   Kukjin Kim
• [GIT PULL 2/7] Samsung hdmi for v3.8   Kukjin Kim
• [GIT PULL 3/7] Samsung gpio for v3.8   Kukjin Kim
• [GIT PULL 4/7] Samsung pinctrl for v3.8   Kukjin Kim
• [GIT PULL 5/7] Samsung DT for v3.8   Kukjin Kim
• [GIT PULL 6/7] Samsung devel for v3.8   Kukjin Kim
• [GIT PULL 7/7] Samsung boards update for v3.8   Kukjin Kim
• [PATCH 2/2] ARM: dts: snow: Add board dts file for Snow board (ARM Chromebook)   Kukjin Kim
• [PATCH 1/2] ARM: EXYNOS: Add aliases for i2c controller for exynos4   Kukjin Kim
• [PATCH 2/2] ARM: dts: snow: Add board dts file for Snow board (ARM Chromebook)   Kukjin Kim
• [PATCH 2/2] i2c: s3c2410: Get the i2c bus number from alias id   Kukjin Kim
• [PATCH] ARM: exynos: dt: add all i2c busses to auxdata   Kukjin Kim
• [PATCH] ARM: exynos: add UART3 to DEBUG_LL ports   Kukjin Kim
• [PATCH 032/493] arm: remove use of __devexit_p   Kukjin Kim
• [PATCH 270/493] arm: remove use of __devinit   Kukjin Kim
• [PATCH 340/493] arm: remove use of __devinitdata   Kukjin Kim
• [PATCH 484/493] arm: remove use of __devexit   Kukjin Kim
• [PATCH 6/9] ARM: remove mach .handle_irq for GIC users   Kukjin Kim
• [PATCH 9/9] ARM: remove mach .handle_irq for VIC users   Kukjin Kim
• [PATCH] ARM: dts: exynos4: Use drive strength 3 for SD pins   Kukjin Kim
• [PATCH v3 RESEND 0/4] ARM: EXYNOS: Power domain DT support extension   Kukjin Kim
• [PATCH 0/4] ARM: dts: exynos4210-origen: Device tree fixes   Kukjin Kim
• [PATCH v3 01/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   Kukjin Kim
• [PATCH v3 02/12] ARM: EXYNOS: Add clk_ops for gating clocks of System MMU   Kukjin Kim
• [PATCH v2] ARM: exynos: add UART3 to DEBUG_LL ports   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers   Kukjin Kim
• [PATCH 1/2] ARM: S3C24XX: Add clkdev entry for camif-upll clock   Kukjin Kim
• [PATCH v3 0/6] ARM: EXYNOS: Add secure firmware support   Kukjin Kim
• [PATCH 2/2] i2c: s3c2410: Get the i2c bus number from alias id   Kukjin Kim
• [GIT PULL 3/3] Samsung exynos5440 for v3.8   Kukjin Kim
• [GIT PULL 2/3] Samsung dt-2 for v3.8   Kukjin Kim
• [GIT PULL 1/3] Samsung devel-2 for v3.8   Kukjin Kim
• [GIT PULL] Samsung fixes-3 for v3.7   Kukjin Kim
• [PATCH 3/4] ARM: dts: exynos4: add node for PL330 MDMA1 controller   Kukjin Kim
• [PATCH] ARM: dts: Add node for GMAC for exynos5440   Kukjin Kim
• [PATCH] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Kukjin Kim
• [GIT PULL] Samsung fixes-3 for v3.7   Kukjin Kim
• [PATCH v4 00/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Kukjin Kim
• [PATCH v2 1/6] ARM: EXYNOS5: Clock settings for SATA and SATA PHY   Kukjin Kim
• [PATCH V3] ARM: EXYNOS5: Add I2S SFR base addresse   Kukjin Kim
• [PATCH 03/24] MAINTAINERS: remove arch/arm/plat-s5p/   Kukjin Kim
• [PATCH V3 0/5] Avoid passing clks through platform data   Kukjin Kim
• [PATCH V3 0/2] ARM: Exynos: Enable I2S platform support for Exynos5   Kukjin Kim
• [PATCH V3] ARM: SAMSUNG: Delete the unnecessary variable   Kukjin Kim
• [PATCH V3] ARM: EXYNOS5: Add clocks for EXYNOS5 Audio Subsystem.   Kukjin Kim
• [PATCH V3 0/5] Avoid passing clks through platform data   Kukjin Kim
• [PATCH v4 0/5] ARM: EXYNOS: Add secure firmware support   Kukjin Kim
• [PATCH] ARM: Exynos5: fix clock initialization for exynos5250   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Fix build of I2S driver   Kukjin Kim
• [GIT PULL 1/3] Samsung devel-2 for v3.8   Kukjin Kim
• [GIT PULL 3/3] Samsung exynos5440 for v3.8   Kukjin Kim
• [PATCH] ARM: Exynos: Remove unused non-dt support for dwmci controller   Kukjin Kim
• [PATCH] ARM: Exynos: Remove unused regs-mem.h file   Kukjin Kim
• [PATCH v4 00/12] clk: exynos4: migrate to common clock framework   Kukjin Kim
• [PATCH] ARM: Exynos: Remove unused non-dt support for dwmci controller   Kukjin Kim
• [PATCH] ARM: EXYNOS: Avoid early use of of_machine_is_compatible()   Kukjin Kim
• [PATCH] ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs   Kukjin Kim
• [PATCH] ARM: Exynos: Remove unused non-dt support for dwmci controller   Kukjin Kim
• [PATCH] ARM: S3C64XX: Add registration of WM2200 Bells device on Cragganmore   Kukjin Kim
• [GIT PULL 1/7] Samsung fixes for v3.7   Kukjin Kim
• [GIT PULL 2/7] Samsung cleanup-3 for v3.8   Kukjin Kim
• [GIT PULL 3/7] Samsung pm updates for v3.8   Kukjin Kim
• [GIT PULL 4/7] Samsung cam for v3.8   Kukjin Kim
• [GIT PULL 5/7] Samsung pinctrl-2 for v3.8   Kukjin Kim
• [GIT PULL 6/7] Samsung devel-3 for v3.8   Kukjin Kim
• [GIT PULL 7/7] Samsung boards-2 for v3.8   Kukjin Kim
• [PATCH] ARM: use clockevents_config_and_register() where possible   Kukjin Kim
• [PATCH] ARM: EXYNOS: Avoid early use of of_machine_is_compatible()   Kukjin Kim
• [PATCH v4 00/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Kukjin Kim
• [PATCH v4 0/5] ARM: EXYNOS: Add secure firmware support   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Fix build of I2S driver   Kukjin Kim
• [GIT PULL 1/7] Samsung fixes for v3.7   Kukjin Kim
• [PATCH] ARM: EXYNOS: Avoid early use of of_machine_is_compatible()   Kukjin Kim
• [PATCH V3 0/5] Avoid passing clks through platform data   Sangbeom Kim
• [PATCH V3 0/2] ARM: Exynos: Enable I2S platform support for Exynos5   Sangbeom Kim
• [PATCH V3] ARM: SAMSUNG: Delete the unnecessary variable   Sangbeom Kim
• [PATCH V3] ARM: EXYNOS5: Add clocks for EXYNOS5 Audio Subsystem.   Sangbeom Kim
• [PATCH V3] ARM: EXYNOS5: Add I2S SFR base addresse   Sangbeom Kim
• [PATCH 1/3] MMC: sdhci-dove: use devm_clk_get()   Russell King
• [PATCH 2/3] MMC: sdhci-dove: use two-stage initialization for sdhci-pltfm   Russell King
• [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove   Russell King
• [PATCH 145/493] tty: serial: remove use of __devexit_p   Tobias Klauser
• [PATCH 161/493] tty: remove use of __devinit   Tobias Klauser
• [PATCH 429/493] tty: remove use of __devexit   Tobias Klauser
• [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h   Marc Kleine-Budde
• [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25   Marc Kleine-Budde
• [PATCH 4/4] ARM: dts: imx: add imx5x phy-mode entries   Marc Kleine-Budde
• [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata   Marc Kleine-Budde
• [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata   Marc Kleine-Budde
• [PATCH 5/9] usb: add phy connection by phy-mode   Marc Kleine-Budde
• [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Marc Kleine-Budde
• [PATCH 5/9] usb: add phy connection by phy-mode   Marc Kleine-Budde
• [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node   Marc Kleine-Budde
• [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node   Marc Kleine-Budde
• [PATCH 1/3] can: c_can: Add d_can raminit support   Marc Kleine-Budde
• [PATCH 2/3] ARM: dts: AM33XX: Add d_can instances to aliases   Marc Kleine-Budde
• [PATCH 1/3] can: c_can: Add d_can raminit support   Marc Kleine-Budde
• [PATCH] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Marc Kleine-Budde
• [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node   Marc Kleine-Budde
• [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node   Marc Kleine-Budde
• [PATCH v2] can: c_can: Add d_can raminit support   Marc Kleine-Budde
• [PATCH v2] can: c_can: Add d_can raminit support   Marc Kleine-Budde
• [PATCH v3] can: c_can: Add d_can raminit support   Marc Kleine-Budde
• [PATCH v3] can: c_can: Add d_can raminit support   Marc Kleine-Budde
• [PATCH v3 3/7] usb: chipidea: usbmisc: fix a potential race condition   Marc Kleine-Budde
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support   Marc Kleine-Budde
• [PATCH 06/15] ARM: shmobile: Add DT table of INTC for sh73a0   Tetsuyuki Kobayashi
• [PATCH 0/7] ARM: mach-shmobile: kzm9g: Reference DT implementation   Tetsuyuki Kobayashi
• [PATCH 7/7] ARM: mach-shmobile: kzm9g: Reference DT implementation   Tetsuyuki Kobayashi
• [PATCH v2 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   Peter Korsgaard
• [PATCH v2 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle   Peter Korsgaard
• [PATCH V5 7/7] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Peter Korsgaard
• [PATCH v4 3/3] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Peter Korsgaard
• [PATCH 119/493] usb: remove use of __devexit_p   Peter Korsgaard
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Peter Korsgaard
• [PATCH RESEND 02/10] ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm   Peter Korsgaard
• [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes   Peter Korsgaard
• [PATCH v4 3/3] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Peter Korsgaard
• [PATCH v4 3/3] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Peter Korsgaard
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Peter Korsgaard
• [PATCH 1/2] ASoC: davinci-mcasp: Add pinctrl support   Peter Korsgaard
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Peter Korsgaard
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Vinod Koul
• [PATCH 1/1] ARM: ux500: Describe UART platform registering issues more accurately   Koul, Vinod
• [question] some question about the residue   Vinod Koul
• [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel   Vinod Koul
• [PATCH] of: dma: Fix-up for warnings !CONFIG_OF   Vinod Koul
• [PATCH 1/4] DMA: PL330: fix locking in pl330_free_chan_resources()   Vinod Koul
• [PATCH v2] dmaengine: sirf: enable the driver support new SiRFmarco SoC   Vinod Koul
• [PATCH] DMAEngine: add dmaengine_prep_interleaved_dma wrapper for interleaved api   Vinod Koul
• [PATCHv9 6/8] ARM: OMAP4: retrigger localtimers after re-enabling gic   Tero Kristo
• [PATCHv9 0/8] ARM: OMAP4: core retention support   Tero Kristo
• [PATCHv9 2/8] ARM: OMAP4: PM: add errata support   Tero Kristo
• [PATCHv9 0/8] ARM: OMAP4: core retention support   Tero Kristo
• [PATCHv2] ARM: OMAP4: USB: power down MUSB PHY during boot   Tero Kristo
• [PATCHv9 0/8] ARM: OMAP4: core retention support   Tero Kristo
• OMAP4430 produces boot warnings   Tero Kristo
• OMAP4430 produces boot warnings   Tero Kristo
• OMAP4430 produces boot warnings   Tero Kristo
• [PATCH 1/1] usb: at91_udc: fix typo on vubs pullup valid check   Greg Kroah-Hartman
• [PATCH v2 1/2] mailbox: OMAP: introduce mailbox framework   Greg Kroah-Hartman
• [PATCH 1/3] OF: Add helper for matching against linux, stdout-path   Greg Kroah-Hartman
• [PATCH 7/8] ARM: OMAP: Remove unnecessary inclusion of dmtimer.h   Greg Kroah-Hartman
• [PATCH] Misc: ARM_CHAR_LCD: Permit the use of a driver on any ARM machine   Greg Kroah-Hartman
• [PATCH 1/3] ARM: dts: Add device tree node for G2D controller on Exynos5   Ajay Kumar
• [PATCH 2/3] ARM: EXYNOS: Add AUXDATA for G2D controller   Ajay Kumar
• [PATCH 3/3] ARM: EXYNOS: Add g2d clock support for EXYNOS5   Ajay Kumar
• [PATCH 0/3]ARM: Exynos5 : Add Power domain device tree support and fix for hardware issue   Prasanna Kumar
• [PATCH 1/3] ARM: dts: exynos5: Set up power domain for MFC and G-scaler   Prasanna Kumar
• [PATCH 2/3] arm: exynos5: Enable PM generic domain support in Kconfig   Prasanna Kumar
• [PATCH 3/3] ARM: EXYNOS5: save CLK_TOP_SRC3 register before powergating   Prasanna Kumar
• [PATCH V2 RESEND 2/5] gpiolib: provide provision for gpiolib to register pin range   Viresh Kumar
• [PATCH V2 4/5] pinctrl: SPEAr: Add gpio ranges support   Viresh Kumar
• [PATCH 1/5] gpiolib: fix up function prototypes etc   Viresh Kumar
• [PATCH] pinctrl: SPEAr: Add SoC specific gpio configuration routines   Viresh Kumar
• [PATCH 0/8] CLK: SPEAr: Fixes & updates   Viresh Kumar
• [PATCH 1/8] CLK: SPEAr: Fix dev_id & con_id for multiple clocks   Viresh Kumar
• [PATCH 2/8] CLK: SPEAr13xx: Fix mux clock names   Viresh Kumar
• [PATCH 3/8] CLK: SPEAr13xx: fix parent names of multiple clocks   Viresh Kumar
• [PATCH 4/8] CLK: SPEAr: Set CLK_SET_RATE_PARENT for few clocks   Viresh Kumar
• [PATCH 5/8] CLK: SPEAr: Add missing clocks   Viresh Kumar
• [PATCH 6/8] CLK: SPEAr: Update clock rate table   Viresh Kumar
• [PATCH 7/8] CLK: SPEAr: Correct index scanning done for clock synths   Viresh Kumar
• [PATCH 8/8] CLK: SPEAr: Remove unused dummy apb_pclk   Viresh Kumar
• [PATCH 00/14] ARM: SPEAr: DT updates   Viresh Kumar
• [PATCH 01/14] pinctrl: SPEAr: add spi chipselect control driver   Viresh Kumar
• [PATCH 02/14] ARM: SPEAr13xx: DT: Add spics gpio controller nodes   Viresh Kumar
• [PATCH 03/14] ARM: SPEAr: DT: Update pinctrl list   Viresh Kumar
• [PATCH 04/14] ARM: SPEAr: DT: Update partition info for MTD devices   Viresh Kumar
• [PATCH 05/14] ARM: SPEAr: DT: Fix existing DT support   Viresh Kumar
• [PATCH 06/14] ARM: SPEAr: DT: Modify DT bindings for STMMAC   Viresh Kumar
• [PATCH 07/14] ARM: SPEAr: DT: add uart state to fix warning   Viresh Kumar
• [PATCH 08/14] ARM: SPEAr: DT: Update device nodes   Viresh Kumar
• [PATCH 09/14] ARM: SPEAr1310: Move 1310 specific misc register into machine specific files   Viresh Kumar
• [PATCH 10/14] ARM: SPEAr13xx: Remove fields not required for ssp controller   Viresh Kumar
• [PATCH 11/14] ARM: SPEAr1310: Fix AUXDATA for compact flash controller   Viresh Kumar
• [PATCH 12/14] ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT   Viresh Kumar
• [PATCH 13/14] ARM: SPEAr3xx: DT: add shirq node for interrupt multiplexor   Viresh Kumar
• [PATCH 14/14] ARM: SPEAr320: DT: Add SPEAr 320 HMI board support   Viresh Kumar
• [PATCH] fixup! ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT   Viresh Kumar
• [PATCH 00/14] ARM: SPEAr: DT updates   Viresh Kumar
• [PATCH] ARM: SPEAr3xx: Shirq: Move shirq controller out of plat/   Viresh Kumar
• [PATCH 02/14] ARM: SPEAr13xx: DT: Add spics gpio controller nodes   Viresh Kumar
• [PATCH 02/14] ARM: SPEAr13xx: DT: Add spics gpio controller nodes   Viresh Kumar
• [PATCH 01/14] pinctrl: SPEAr: add spi chipselect control driver   Viresh Kumar
• [PATCH 01/16] gpio: SPEAr: add spi chipselect control driver   Viresh Kumar
• [PATCH 01/16] gpio: SPEAr: add spi chipselect control driver   Viresh Kumar
• [PATCH 0/8] CLK: SPEAr: Fixes & updates   Viresh Kumar
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Viresh Kumar
• [PATCH 3/3] CLK: add more managed APIs   Viresh Kumar
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Viresh Kumar
• [PATCH 2/3] CLK: uninline clk_prepare_enable() and clk_disable_unprepare()   Viresh Kumar
• [PATCH] gpiolib: let gpiochip_add_pin_range() specify offset   Viresh Kumar
• [PATCH 1/7 v2] gpiolib: let gpiochip_add_pin_range() specify offset   Viresh Kumar
• [PATCH] gpiolib: fix bug and clarify OF use of ranges   Viresh Kumar
• [PATCH] gpiolib: rename pin range arguments   Viresh Kumar
• [PATCH 00/14] ARM: SPEAr: DT updates   Viresh Kumar
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Viresh Kumar
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Viresh Kumar
• [PATCH v2 0/3] CLK: add more devm_* APIs   Viresh Kumar
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Viresh Kumar
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Viresh Kumar
• [PATCH 1/1] gpio: Provide the STMPE GPIO driver with its own IRQ Domain   Viresh Kumar
• [PATCH 1/1] mfd: Simplify IRQ domain registration code in STMPE   Viresh Kumar
• [PATCH 1/8] DMA: PL330: use prefix in reg names to build under x86   Viresh Kumar
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Viresh Kumar
• [PATCH 08/14] ARM: SPEAr: DT: Update device nodes   Viresh Kumar
• [GIT PULL]: spear-for-3.8 (was earlier: Re: [PATCH 00/14] ARM: SPEAr: DT updates)   Viresh Kumar
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Viresh Kumar
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Viresh Kumar
• linux-next: manual merge of the arm-soc tree with the slave-dma tree   Viresh Kumar
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Viresh Kumar
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Viresh Kumar
• [PATCH] fixup! cpufreq: SPEAr: Add CPUFreq driver   Viresh Kumar
• [PATCH 00/10] serial: sh-sci fixes - console PM, SCIFB, SMP lockup, etc.   Shinya Kuribayashi
• [PATCH 01/10] Revert "sh-sci / PM: Avoid deadlocking runtime PM"   Shinya Kuribayashi
• [PATCH 02/10] Revert "sh-sci / PM: Use power.irq_safe"   Shinya Kuribayashi
• [PATCH 03/10] Partially revert "serial: sh-sci: console Runtime PM support"   Shinya Kuribayashi
• [PATCH 04/10] serial: sh-sci: console runtime PM support (revisit)   Shinya Kuribayashi
• [PATCH 05/10] serial: sh-sci: fix condition test to set SCBRR   Shinya Kuribayashi
• [PATCH 06/10] serial: sh-sci: support lower baud rate   Shinya Kuribayashi
• [PATCH 07/10] serial: sh-sci: mask SCTFDR/RFDR according to fifosize   Shinya Kuribayashi
• [PATCH 08/10] serial: sh-sci: fix common SCIFB regmap definition   Shinya Kuribayashi
• [PATCH 09/10] serial: sh-sci: add locking to console write function to avoid SMP lockup   Shinya Kuribayashi
• [PATCH 10/10] serial: sh-sci: fix possible race cases on SCSCR register accesses   Shinya Kuribayashi
• [PATCH 00/10] serial: sh-sci fixes - console PM, SCIFB, SMP lockup, etc.   Shinya Kuribayashi
• [PATCH v2 00/10] serial: sh-sci fixes - console PM, SCIFB, SMP lockup, etc.   Shinya Kuribayashi
• [PATCH v2 01/10] Revert "sh-sci / PM: Avoid deadlocking runtime PM"   Shinya Kuribayashi
• [PATCH v2 02/10] Revert "sh-sci / PM: Use power.irq_safe"   Shinya Kuribayashi
• [PATCH v2 03/10] Partially revert "serial: sh-sci: console Runtime PM support"   Shinya Kuribayashi
• [PATCH v2 04/10] serial: sh-sci: console runtime PM support (revisit)   Shinya Kuribayashi
• [PATCH v2 05/10] serial: sh-sci: fix condition test to set SCBRR   Shinya Kuribayashi
• [PATCH v2 06/10] serial: sh-sci: support lower baud rate   Shinya Kuribayashi
• [PATCH v2 07/10] serial: sh-sci: mask SCTFDR/RFDR according to fifosize   Shinya Kuribayashi
• [PATCH v2 08/10] serial: sh-sci: fix common SCIFB regmap definition   Shinya Kuribayashi
• [PATCH v2 09/10] serial: sh-sci: add locking to console write function to avoid SMP lockup   Shinya Kuribayashi
• [PATCH v2 10/10] serial: sh-sci: fix possible race cases on SCSCR register accesses   Shinya Kuribayashi
• [PATCH 0/5] i2c-sh_mobile non-urgent changes   Shinya Kuribayashi
• [PATCH 3/4] i2c-s3c2410: use exponential back off while polling for bus idle   Daniel Kurtz
• [PATCH 0/4] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH 1/4] ARM: EXYNOS: remove system mmu initialization from arch/arm/ tree   Cho KyongHo
• [PATCH 2/4] ARM: EXYNOS: Add clk_ops for gating clocks of System MMU   Cho KyongHo
• [PATCH 3/4] ARM: EXYNOS: add System MMU definition to DT   Cho KyongHo
• [PATCH 4/4] iommu/exynos: enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH v2 0/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH v2 01/12] ARM: EXYNOS: remove system mmu initialization from arch/arm/ tree   Cho KyongHo
• [PATCH v2 02/12] ARM: EXYNOS: Add clk_ops for gating clocks of System MMU   Cho KyongHo
• [PATCH v2 03/12] ARM: EXYNOS: add System MMU definition to DT   Cho KyongHo
• [PATCH v2 04/12] iommu/exynos: support for device tree   Cho KyongHo
• [PATCH v2 05/12] iommu/exynos: pass version information from DT   Cho KyongHo
• [PATCH v6 06/12] iommu/exynos: allocate lv2 page table from own slab   Cho KyongHo
• [PATCH v2 07/12] iommu/exynos: change rwlock to spinlock   Cho KyongHo
• [PATCH v2 08/12] iommu/exynos: set System MMU as the parent of client device   Cho KyongHo
• [PATCH v2 09/12] iommu/exynos: add supoort for runtime pm and suspend/resume   Cho KyongHo
• [PATCH v2 10/12] iommu/exynos: add support for System MMU 3.2 and 3.3   Cho KyongHo
• [PATCH v2 11/12] iommu/exynos: add literal name of System MMU for debugging   Cho KyongHo
• [PATCH v2 12/12] iommu/exynos: add debugfs entries for System MMU   Cho KyongHo
• [PATCH v3 00/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH v3 01/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   Cho KyongHo
• [PATCH v3 02/12] ARM: EXYNOS: Add clk_ops for gating clocks of System MMU   Cho KyongHo
• [PATCH v3 03/12] ARM: EXYNOS: add System MMU definition to DT   Cho KyongHo
• [PATCH v3 04/12] iommu/exynos: support for device tree   Cho KyongHo
• [PATCH v3 05/12] iommu/exynos: pass version information from DT   Cho KyongHo
• [PATCH v3 06/12] iommu/exynos: allocate lv2 page table from own slab   Cho KyongHo
• [PATCH v3 07/12] iommu/exynos: change rwlock to spinlock   Cho KyongHo
• [PATCH v3 08/12] iommu/exynos: set System MMU as the parent of client device   Cho KyongHo
• [PATCH v3 09/12] iommu/exynos: add supoort for runtime pm and suspend/resume   Cho KyongHo
• [PATCH v3 10/12] iommu/exynos: add support for System MMU 3.2 and 3.3   Cho KyongHo
• [PATCH v3 11/12] iommu/exynos: add literal name of System MMU for debugging   Cho KyongHo
• [PATCH v3 12/12] iommu/exynos: add debugfs entries for System MMU   Cho KyongHo
• [PATCH v4 00/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH v4 01/12] ARM: EXYNOS: Add clk_ops for gating clocks of System MMU   Cho KyongHo
• [PATCH v4 02/12] ARM: EXYNOS: add System MMU definition to DT   Cho KyongHo
• [PATCH v4 03/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   Cho KyongHo
• [PATCH v4 04/12] iommu/exynos: support for device tree   Cho KyongHo
• [PATCH v4 05/12] iommu/exynos: pass version information from DT   Cho KyongHo
• [PATCH v4 06/12] iommu/exynos: allocate lv2 page table from own slab   Cho KyongHo
• [PATCH v4 07/12] iommu/exynos: change rwlock to spinlock   Cho KyongHo
• [PATCH v4 08/12] iommu/exynos: set System MMU as the parent of client device   Cho KyongHo
• [PATCH v4 09/12] iommu/exynos: add support for runtime pm and suspend/resume   Cho KyongHo
• [PATCH v4 10/12] iommu/exynos: add support for System MMU 3.2 and 3.3   Cho KyongHo
• [PATCH v4 11/12] iommu/exynos: add literal name of System MMU for debugging   Cho KyongHo
• [PATCH v4 12/12] iommu/exynos: add debugfs entries for System MMU   Cho KyongHo
• [PATCH v4 00/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH v4 03/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   Cho KyongHo
• [PATCH v4 00/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH v4 00/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH v2 5/6] ARM: davinci: remoteproc board support for OMAP-L138 DSP   Prabhakar Lad
• [PATCH v2 5/6] ARM: davinci: remoteproc board support for OMAP-L138 DSP   Prabhakar Lad
• [PATCH] davinci: vpbe: pass different platform names to handle different ip's   Prabhakar Lad
• [PATCH] davinci: vpbe: pass different platform names to handle different ip's   Prabhakar Lad
• [PATCH v2] davinci: vpbe: pass different platform names to handle different ip's   Prabhakar Lad
• [PATCH 133/493] remove use of __devexit_p   Prabhakar Lad
• [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock   Mark Langsdorf
• [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock   Mark Langsdorf
• [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock   Mark Langsdorf
• [PATCH 0/6 v5] cpufreq: add support for Calxeda ECX-1000 (highbank)   Mark Langsdorf
• [PATCH 1/6 v5] arm: use devicetree to get smp_twd clock   Mark Langsdorf
• [PATCH 2/6 v5] clk, highbank: Prevent glitches in non-bypass reset mode   Mark Langsdorf
• [PATCH 3/6 v5] cpufreq: tolerate inexact values when collecting stats   Mark Langsdorf
• [PATCH 4/6 v5] arm highbank: add support for pl320 IPC   Mark Langsdorf
• [PATCH 5/6 v5] power: export opp cpufreq functions   Mark Langsdorf
• [PATCH 6/6 v5] cpufreq, highbank: add support for highbank cpufreq   Mark Langsdorf
• [PATCH 4/6 v5] arm highbank: add support for pl320 IPC   Mark Langsdorf
• [PATCH 0/6 v6] cpufreq: add support for Calxeda ECX-1000 (highbank)   Mark Langsdorf
• [PATCH 1/6 v6] arm: use devicetree to get smp_twd clock   Mark Langsdorf
• [PATCH 2/6 v6] clk, highbank: Prevent glitches in non-bypass reset mode   Mark Langsdorf
• [PATCH 3/6 v6] cpufreq: tolerate inexact values when collecting stats   Mark Langsdorf
• [PATCH 4/6 v6] arm highbank: add support for pl320 IPC   Mark Langsdorf
• [PATCH 5/6 v6] power: export opp cpufreq functions   Mark Langsdorf
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Mark Langsdorf
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Mark Langsdorf
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Mark Langsdorf
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Mark Langsdorf
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Mark Langsdorf
• [PATCH] ARM: EXYNOS: use BUG_ON where possible   Maarten Lankhorst
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Francesco Lavra
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Francesco Lavra
• [PATCH 6/8] arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON   Julia Lawall
• [PATCH V2] ARM: kirkwood: Increase NAND chip-delay for DNS-32[05]   Jamie Lentin
• [PATCH] ARM: kirkwood: Increase NAND chip-delay for DNS-320   Jamie Lentin
• [PATCH] hwmon: Only include of_match_table with CONFIG_OF_GPIO   Jamie Lentin
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Jamie Lentin
• [PATCH 00/16] mm: use augmented rbtrees for finding unmapped areas   Michel Lespinasse
• [PATCH 01/16] mm: add anon_vma_lock to validate_mm()   Michel Lespinasse
• [PATCH 02/16] mm: augment vma rbtree with rb_subtree_gap   Michel Lespinasse
• [PATCH 03/16] mm: check rb_subtree_gap correctness   Michel Lespinasse
• [PATCH 04/16] mm: rearrange vm_area_struct for fewer cache misses   Michel Lespinasse
• [PATCH 05/16] mm: vm_unmapped_area() lookup function   Michel Lespinasse
• [PATCH 06/16] mm: use vm_unmapped_area() on x86_64 architecture   Michel Lespinasse
• [PATCH 07/16] mm: fix cache coloring on x86_64 architecture   Michel Lespinasse
• [PATCH 08/16] mm: use vm_unmapped_area() in hugetlbfs   Michel Lespinasse
• [PATCH 09/16] mm: use vm_unmapped_area() in hugetlbfs on i386 architecture   Michel Lespinasse
• [PATCH 10/16] mm: use vm_unmapped_area() on mips architecture   Michel Lespinasse
• [PATCH 11/16] mm: use vm_unmapped_area() on arm architecture   Michel Lespinasse
• [PATCH 12/16] mm: use vm_unmapped_area() on sh architecture   Michel Lespinasse
• [PATCH 13/16] mm: use vm_unmapped_area() on sparc64 architecture   Michel Lespinasse
• [PATCH 14/16] mm: use vm_unmapped_area() in hugetlbfs on sparc64 architecture   Michel Lespinasse
• [PATCH 15/16] mm: use vm_unmapped_area() on sparc32 architecture   Michel Lespinasse
• [PATCH 16/16] mm: use vm_unmapped_area() in hugetlbfs on tile architecture   Michel Lespinasse
• [PATCH 15/16] mm: use vm_unmapped_area() on sparc32 architecture   Michel Lespinasse
• [PATCH 03/16] mm: check rb_subtree_gap correctness   Michel Lespinasse
• [PATCH] ARM: gic: use BUG_ON where possible   Sasha Levin
• [PATCH] ARM: kprobes: use BUG_ON where possible   Sasha Levin
• [PATCH] ARM: EXYNOS: use BUG_ON where possible   Sasha Levin
• [PATCH] ARM: integrator: use BUG_ON where possible   Sasha Levin
• [PATCH] ARM: OMAP1: use BUG_ON where possible   Sasha Levin
• [PATCH] ARM: dma: use BUG_ON where possible   Sasha Levin
• [PATCH] ARM: versatile: use BUG_ON where possible   Sasha Levin
• [PATCH 03/16] mm: check rb_subtree_gap correctness   Sasha Levin
• [PATCH] ARM: EXYNOS: use BUG_ON where possible   Sasha Levin
• [PATCH] ARM: EXYNOS: use BUG_ON where possible   Sasha Levin
• [PATCH 0/4] Support the MX6 FEC as a PTP hardware clock   Frank Li
• [PATCH 0/4] Support the MX6 FEC as a PTP hardware clock   Frank Li
• [PATCH 4/4] FEC: Add time stamping code and a PTP hardware clock   Frank Li
• [PATCH 1/1] regulator: gpio-regulator: fix crash when no states property in dt   Frank Li
• [PATCH 1/1] regulator: gpio-regulator: fix crash when no states property in dt   Frank Li
• [PATCH 1/2] regulator: gpio-regulator: doc: Fix wrong key gpio-enable   Frank Li
• [PATCH 2/2] regulator: gpio-regulator: fix can't find regulator node in dt   Frank Li
• [PATCH 1/1] regulator: gpio-regulator: fix crash when no states property in dt   Frank Li
• [PATCH 1/2] ARM: dts: imx6q-sabresd: add i2c1 device and mma8451   Frank Li
• [PATCH 2/2] hwmon: MMA8451: Add mma8451 3 axis digtial accelerometer driver   Frank Li
• Configure the USB device/host on sam9g25 module   Zhong Li
• [PATCH 1/2] ARM: i.MX27: Add platform support for IRAM.   Guennadi Liakhovetski
• [PATCH 0/5] i2c-sh_mobile non-urgent changes   Guennadi Liakhovetski
• [PATCH 077/493] mmc: remove use of __devexit_p   Guennadi Liakhovetski
• [PATCH 133/493] remove use of __devexit_p   Guennadi Liakhovetski
• [PATCH 192/493] scsi: remove use of __devinit   Guennadi Liakhovetski
• [PATCH 234/493] media: remove use of __devinit   Guennadi Liakhovetski
• [PATCH 237/493] mmc: remove use of __devinit   Guennadi Liakhovetski
• [PATCH 097/493] scsi: remove use of __devexit_p   Guennadi Liakhovetski
• [PATCH 414/493] mmc: remove use of __devexit   Guennadi Liakhovetski
• [PATCH 444/493] media: remove use of __devexit   Guennadi Liakhovetski
• [PATCH 425/493] scsi: remove use of __devexit   Guennadi Liakhovetski
• [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove   Guennadi Liakhovetski
• [PATCH 2/7] mmc: sdhi: enchance OF support for flags and cd-gpios   Guennadi Liakhovetski
• [PATCH 2/7] mmc: sdhi: enchance OF support for flags and cd-gpios   Guennadi Liakhovetski
• [PATCH] ARM: mx25_3ds: Add camera support   Guennadi Liakhovetski
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Grant Likely
• [RFC] dt/platform: Use cell-index for device naming if available   Grant Likely
• [PATCH 1/3] OF: Add helper for matching against linux, stdout-path   Grant Likely
• [PATCH 1/3] OF: Add helper for matching against linux, stdout-path   Grant Likely
• [PATCH] arm/dts: Add basic support for gta04 (Openmoko next generation) board.   Grant Likely
• [PATCH 1/1] mtd: physmap_of: allow to specify the mtd name for retro compatiblity   Grant Likely
• [PATCH] bindings: i2c: use consistent naming for i2c binding descriptions   Grant Likely
• [RFC] dt/platform: Use cell-index for device naming if available   Grant Likely
• [PATCH] arm-dt: Enable DT proc updates.   Grant Likely
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Grant Likely
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Grant Likely
• [RFC] dt/platform: Use cell-index for device naming if available   Grant Likely
• [PATCH 1/3] OF: Add helper for matching against linux, stdout-path   Grant Likely
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Grant Likely
• [PATCHv9 0/3] Runtime Interpreted Power Sequences   Grant Likely
• [PATCH V4 1/3] of: introduce for_each_matching_node_and_match()   Grant Likely
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Grant Likely
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Grant Likely
• IRQ code inconsistencies across platforms   Grant Likely
• [PATCH 1/1 v2] of_spi: add generic binding support to specify cs gpio   Grant Likely
• [PATCH] Documentation: correct argument list for of_platform_populate correction to match of_platform.h prototype   Grant Likely
• [PATCH v3] pwm: Device tree support for PWM polarity.   Grant Likely
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Grant Likely
• [PATCH 1/4] OF: Add helper for matching against linux, stdout-path   Grant Likely
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Grant Likely
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Grant Likely
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Grant Likely
• [PATCH 1/4] OF: Add helper for matching against linux, stdout-path   Grant Likely
• [PATCH] ARM: kernel: fix nr_cpu_ids check in DT logical map init   Grant Likely
• [PATCH 1/4] OF: Add helper for matching against linux, stdout-path   Grant Likely
• [PATCH 1/2] gpiolib: add gpio_export_with_name   Grant Likely
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Grant Likely
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support   Grant Likely
• [PATCH 2/4] irqdomain: augment add_simple() to allocate descs   Grant Likely
• [PATCH] clk: Make the generic clock API available by default   Grant Likely
• [PATCH v4] Introduce irqchip infrastructure   Grant Likely
• [PATCH] gpio: pl061: remove old comment   Grant Likely
• [GIT PULL] GPIO patch stack for v3.8   Grant Likely
• [PATCH] pinctrl: nomadik: Add terminating entry for platform_device_id table   Axel Lin
• [PATCH] pinctrl: at91: Staticize non-exported symbols   Axel Lin
• [PATCH] pinctrl: sirf: Staticize non-exported symbol   Axel Lin
• [PATCH] clk: spear: Add stub functions for spear3[0|1|2]0_clk_init()   Axel Lin
• [PATCH RFT 1/2] pinctrl: dove: Fix dove_audio1_ctrl_set when BIT(0|1|2|3) of config is clear   Axel Lin
• [PATCH RFT 2/2] pinctrl: dove: Checking valid config in dove_audio1_ctrl_set   Axel Lin
• [PATCH] ARM: select PINCTRL for ARCH_MMP   Axel Lin
• [PATCH] pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910   Axel Lin
• [PATCH 1/4] pinctrl: dove: Prevent NULL dereference if of_match_device returns NULL   Axel Lin
• [PATCH 2/4] pinctrl: kirkwood: Prevent NULL dereference if of_match_device returns NULL   Axel Lin
• [PATCH 3/4] pinctrl: at91: Prevent NULL dereference if of_match_device returns NULL   Axel Lin
• [PATCH 4/4] pinctrl: nomadik: Prevent NULL dereference if of_match_device returns NULL   Axel Lin
• [PATCH RESEND 3/4] pinctrl: at91: Prevent NULL dereference if of_match_device returns NULL   Axel Lin
• [PATCH 1/4] pinctrl: dove: Prevent NULL dereference if of_match_device returns NULL   Axel Lin
• [PATCH] pinctrl: nomadik: Staticize non-exported symbols   Axel Lin
• [PATCH RFT 1/2] pinctrl: dove: Fix dove_audio1_ctrl_set when BIT(0|1|2|3) of config is clear   Axel Lin
• [PATCH RFT 1/2] pinctrl: dove: Fix dove_audio1_ctrl_set when BIT(0|1|2|3) of config is clear   Axel Lin
• [PATCH RESEND] pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910   Axel Lin
• [PATCH] ARM: mmp: select PINCTRL for ARCH_MMP   Axel Lin
• [PATCH 0/3] more omap clean-up for ARCH_MULTIPLATFORM   Tony Lindgren
• [PATCH 1/3] ARM: OMAP: Remove unnecessary mach and plat includes   Tony Lindgren
• [PATCH 2/3] ARM: OMAP: Remove NEED_MACH_GPIO_H   Tony Lindgren
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Tony Lindgren
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Tony Lindgren
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Tony Lindgren
• [PATCH v3 5/9] document: devicetree: bind pinconf with pin-single   Tony Lindgren
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 01/15] ARM: OMAP2+: mailbox: Add an API for flushing the FIFO   Tony Lindgren
• [PATCH v5 0/6] Move rest of omap-iommu to live in drivers/iommu   Tony Lindgren
• [PATCH 1/6] ARM: OMAP: Merge iommu2.h into iommu.h   Tony Lindgren
• [PATCH 2/6] ARM: OMAP2+: Move iopgtable header to drivers/iommu/   Tony Lindgren
• [PATCH 3/6] ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h   Tony Lindgren
• [PATCH 4/6] ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c   Tony Lindgren
• [PATCH 5/6] ARM: OMAP2+: Make some definitions local   Tony Lindgren
• [PATCH 6/6] ARM: OMAP2+: Move iommu/iovmm headers to platform_data   Tony Lindgren
• [PATCH V2] ARM: PMU: fix runtime PM enable   Tony Lindgren
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Tony Lindgren
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Tony Lindgren
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Tony Lindgren
• [GIT PULL 3/3] omap prcm cleanup for v3.8 merge window, part1   Tony Lindgren
• [PATCH v2 03/14] ARM: OMAP5: id: Add cpu id for ES versions   Tony Lindgren
• [PATCHv2 1/6] arch: Change defconfigs to point to g_mass_storage.   Tony Lindgren
• [PATCHv2 1/6] arch: Change defconfigs to point to g_mass_storage.   Tony Lindgren
• [PATCH] [PATCH] remove pcm049 from Makefile   Tony Lindgren
• [GIT PULL v2] ARM: OMAP: more hwmod/PRCM fixes for 3.7-rc   Tony Lindgren
• [GIT PULL] ARM: OMAP: PM: few more fixes for v3.7-rc   Tony Lindgren
• [PATCHv2 1/6] arch: Change defconfigs to point to g_mass_storage.   Tony Lindgren
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Tony Lindgren
• [GIT PULL] ARM: OMAP: DTS for 3.8   Tony Lindgren
• [GIT PULL] ARM: OMAP: Timer and Counter DT Updates for v3.8   Tony Lindgren
• [GIT PULL] OMAP: PM: misc. fixes for v3.8   Tony Lindgren
• [PATCH 0/6] OMAPDSS: enable DSS for Panda & SDP with devtree   Tony Lindgren
• [GIT PULL] OMAP: PM: cleanups for v3.8   Tony Lindgren
• [GIT PULL] OMAP: PM: SmartReflex updates for v3.8   Tony Lindgren
• [GIT PULL] OMAP: PM: voltage layer updates for v3.8   Tony Lindgren
• [PATCH 1/1] ARM: OMAP: Add maintainer entry for IGEP machines   Tony Lindgren
• [RESEND] [PATCH 3.6.0- 1/6] ARM/omap1: use module_platform_driver macro   Tony Lindgren
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Tony Lindgren
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Tony Lindgren
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Tony Lindgren
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Tony Lindgren
• [PATCH v4 0/3] ocp2scp: add non-dt support   Tony Lindgren
• [PATCH V2 00/14] ARM: OMAP: DMTIMER fixes   Tony Lindgren
• [PATCH 0/6] OMAPDSS: enable DSS for Panda & SDP with devtree   Tony Lindgren
• [PATCH V2 00/14] ARM: OMAP: DMTIMER fixes   Tony Lindgren
• [PATCH 07/11] ARM: OMAP: Move omap-pm-noop.c local to mach-omap2   Tony Lindgren
• [PATCH v4 2/9] pinctrl: single: support gpio request and free   Tony Lindgren
• [GIT PULL] ARM: OMAP: Timer and Counter DT Updates for v3.8   Tony Lindgren
• [PATCH v4 3/9] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH v4 9/9] pinctrl: single: dump pinmux register value   Tony Lindgren
• [PATCH v4 5/9] document: devicetree: bind pinconf with pin-single   Tony Lindgren
• [PATCH v4 1/9] ARM: mmp: select pinctrl driver   Tony Lindgren
• [PATCH v2 00/26] Move OMAP2+ over to common clk framework   Tony Lindgren
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Tony Lindgren
• [PATCH 1/7] ARM: omap: remove obsoleted init_consistent_dma_size()   Tony Lindgren
• [PATCH 0/7] ARM: remove init_consistent_dma_size() stub   Tony Lindgren
• [GIT PULL] ARM: OMAP: Timer and Counter DT Updates for v3.8   Tony Lindgren
• [PATCH v4 3/9] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH v4 3/9] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH] ARM: OMAP2+: Prevent redefinition errors for soc.h   Tony Lindgren
• [PATCH v3 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Tony Lindgren
• [PATCH] ARM: OMAP2+: Prevent redefinition errors for soc.h   Tony Lindgren
• [PATCH v4 3/9] pinctrl: single: support pinconf generic   Tony Lindgren
• [GIT PULL] ARM: OMAP: DTS for 3.8 part 2   Tony Lindgren
• [GIT PULL] ARM: OMAP: Timer and Counter DT Updates for v3.8   Tony Lindgren
• [PATCH v2 00/26] Move OMAP2+ over to common clk framework   Tony Lindgren
• [GIT PULL v2] ARM: OMAP: second set of PRCM cleanups for 3.8   Tony Lindgren
• [PATCH] ARM: OMAP: Fix kernel panic in dmtimer probe   Tony Lindgren
• [GIT PULL] musb regression fixes for v3.7-rc4   Tony Lindgren
• [PATCH v4 4/9] ARM: dts: support pinctrl single in pxa910   Tony Lindgren
• [PATCH] ARM: OMAP2+: Prevent redefinition errors for soc.h   Tony Lindgren
• [PATCH] ARM: OMAP2+: Prevent redefinition errors for soc.h   Tony Lindgren
• [PATCH v4 4/9] ARM: dts: support pinctrl single in pxa910   Tony Lindgren
• [PATCH linux-next] ARM: OMAP2: Fix compillation error in cm_common   Tony Lindgren
• [PATCH V3 00/13] ARM: OMAP: DMTIMER fixes   Tony Lindgren
• [PATCH 12/11] ARM: OMAP: Fix relative includes for fpga.h   Tony Lindgren
• [PATCH v5 0/6] Move rest of omap-iommu to live in drivers/iommu   Tony Lindgren
• [PATCH -next] ARM: OMAP2+: remove duplicated include from board-overo.c   Tony Lindgren
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Tony Lindgren
• [PATCH] ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC   Tony Lindgren
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tony Lindgren
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Tony Lindgren
• OMAP baseline test results for v3.7-rc5   Tony Lindgren
• [PATCH] ARM: OMAP1: use BUG_ON where possible   Tony Lindgren
• [GIT PULL] ARM: OMAP: GPMC generic timing   Tony Lindgren
• [GIT PULL 1/6] omap cleanup fixes for v3.8 merge window   Tony Lindgren
• [PATCH v4 2/9] pinctrl: single: support gpio request and free   Tony Lindgren
• [PATCH v4 9/9] pinctrl: single: dump pinmux register value   Tony Lindgren
• [GIT PULL 1/6] omap cleanup fixes for v3.8 merge window   Tony Lindgren
• [GIT PULL 1/6] omap cleanup fixes for v3.8 merge window   Tony Lindgren
• [GIT PULL 2/6] omap prcm cleanup for v3.8 merge window, part2   Tony Lindgren
• [GIT PULL 3/6] omap device tree updates for v3.8 merge window   Tony Lindgren
• [GIT PULL 4/6] omap pm updates for v3.8 merge window   Tony Lindgren
• [GIT PULL 5/6] omap board changes for v3.8 merge window   Tony Lindgren
• [GIT PULL 6/6] omap gpmc changes for v3.8 merge window   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: clock: convert to common clock framework   Tony Lindgren
• [GIT PULL] ARM: OMAP: DMTIMER fixes   Tony Lindgren
• [PATCH 8/8] ARM: OMAP: Move plat/dmtimer.h to plat-omap/dmtimer.h   Tony Lindgren
• [PATCH 8/8] ARM: OMAP: Move plat/dmtimer.h to plat-omap/dmtimer.h   Tony Lindgren
• [GIT PULL] ARM: OMAP4: PM: basic support for core retention in suspend   Tony Lindgren
• OMAP* Latest build failures   Tony Lindgren
• OMAP* Latest build failures   Tony Lindgren
• OMAP* Latest build failures   Tony Lindgren
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Tony Lindgren
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Tony Lindgren
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Tony Lindgren
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Tony Lindgren
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Tony Lindgren
• OMAP baseline test results for v3.7-rc5   Tony Lindgren
• [PATCH] ARM: OMAP4: PM: fix errata handling when CONFIG_PM=n   Tony Lindgren
• [PATCH] ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n   Tony Lindgren
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Tony Lindgren
• [GIT PULL 2/5] omap cleanup fix and soc detection improvment for v3.8 merge window   Tony Lindgren
• [GIT PULL 1/5] omap non critical fixes for v3.8 merge window   Tony Lindgren
• [GIT PULL 4/5] omap timer changes for v3.8 merge window   Tony Lindgren
• [GIT PULL 3/5] omap common clock changes for v3.8 merge window   Tony Lindgren
• [GIT PULL 5/5] omap full-chip retention in suspend for v3.8 merge window   Tony Lindgren
• [GIT PULL 1/5] omap non critical fixes for v3.8 merge window   Tony Lindgren
• [arm-soc:for-next 24/32] arch/arm/mach-omap2/board-generic.c:115:13: error: 'omap_prcm_restart' undeclared here (not in a function)   Tony Lindgren
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Tony Lindgren
• [PATCH v5 05/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH v5 02/10] pinctrl: single: support gpio request and free   Tony Lindgren
• [PATCH v5 03/10] pinctrl: append method of lookup pinctrl map   Tony Lindgren
• [PATCH] OMAP2+: mux: Fixed gpio mux mode analysis.   Tony Lindgren
• Final call for 3.8 arm-soc patches   Tony Lindgren
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tony Lindgren
• OMAP* Latest build failures   Tony Lindgren
• [PATCH 032/493] arm: remove use of __devexit_p   Tony Lindgren
• [PATCH 1/7] ir-rx51: Handle signals properly   Tony Lindgren
• [PATCH v5 0/6] Move rest of omap-iommu to live in drivers/iommu   Tony Lindgren
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tony Lindgren
• [PATCH v4 5/8] crypto: omap-sham: Remove cpu_is/omap_type check from driver   Tony Lindgren
• [PATCH 4/7] crypto: omap-aes: Remove cpu_is/omap_type check from driver   Tony Lindgren
• [PATCH v4 7/8] crypto: omap-sham: Add code to use dmaengine API   Tony Lindgren
• [PATCH 0/5] remaining omap multiplatform patches for v3.8 merge window   Tony Lindgren
• [PATCH 1/5] watchdog: OMAP: fixup for ARM multiplatform support   Tony Lindgren
• [PATCH 2/5] ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support   Tony Lindgren
• [PATCH 3/5] ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h   Tony Lindgren
• [PATCH 4/5] ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h   Tony Lindgren
• [PATCH 5/5] RFC: ARM: OMAP: Prepare Kconfig and Makefiles for enabling ARCH_MULTIPLATFORM   Tony Lindgren
• tfp410 and i2c_bus_num   Tony Lindgren
• [GIT PULL] ARM: OMAP: Timer Clean-up   Tony Lindgren
• [PATCH v3 1/2] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Tony Lindgren
• [PATCH 3/5] ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h   Tony Lindgren
• [PATCH v5 4/5] iommu/omap: adapt to runtime pm   Tony Lindgren
• [PATCH v5 5/5] ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks   Tony Lindgren
• [PATCH 2/2] ARM: OMAP: ads7846: fix pendown debounce setting   Tony Lindgren
• [PATCH 0/2] ARM: OMAP: ads7846: fix pendown debounce setting   Tony Lindgren
• [GIT PULL] few omap regression fixes for v3.7-rc5   Tony Lindgren
• [GIT PULL] omap iommu clean-up dependency branch for v3.8 merge window   Tony Lindgren
• [PATCH] ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER   Tony Lindgren
• [PATCH v5 05/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH v5 05/10] pinctrl: single: support pinconf generic   Tony Lindgren
• [PATCH 0/5] remaining omap multiplatform patches for v3.8 merge window   Tony Lindgren
• [PATCH] ARM: implement optimized percpu variable access   Tony Lindgren
• [PATCH] ARM: implement optimized percpu variable access   Tony Lindgren
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Tony Lindgren
• OMAP build now completely broken in latest arm-soc   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: hwmod/PRM changes for 3.8   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: hwmod/PRM changes for 3.8   Tony Lindgren
• [GIT PULL 1/3] omap late timer clean-up (and a warning fix) for v3.8 merge window   Tony Lindgren
• [GIT PULL 2/3] omap late prcm changes for v3.8 merge window   Tony Lindgren
• [GIT PULL 3/3] omap late multiplatform cleanup for v3.8 merge window   Tony Lindgren
• OMAP build now completely broken in latest arm-soc   Tony Lindgren
• [PATCH] ARM: use clockevents_config_and_register() where possible   Tony Lindgren
• [PATCH v5 3/4] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Tony Lindgren
• [PATCH v5 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Tony Lindgren
• [PATCH v2] ARM: implement optimized percpu variable access   Tony Lindgren
• [GIT PULL 3/3] omap late multiplatform cleanup for v3.8 merge window   Tony Lindgren
• [GIT PULL 1/3] omap late timer clean-up (and a warning fix) for v3.8 merge window   Tony Lindgren
• [GIT PULL 2/3] omap late prcm changes for v3.8 merge window   Tony Lindgren
• [PATCH v4 1/5] zynq: use GIC device tree bindings   John Linn
• [PATCH] arm: zynq: add system level control register manager   John Linn
• [PATCH 01/15] ARM: clps711x: Load serial driver from boards   Russell King - ARM Linux
• [PATCH v2] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Russell King - ARM Linux
• [PATCH 01/15] ARM: clps711x: Load serial driver from boards   Russell King - ARM Linux
• [PATCH] ARM: quiet down the non make -s output   Russell King - ARM Linux
• [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock   Russell King - ARM Linux
• [PATCH 8/9] ARM: support uprobe handling   Russell King - ARM Linux
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Russell King - ARM Linux
• ARM: idle sleep time for hotplugged cpu   Russell King - ARM Linux
• vexpress issues in next-20121029   Russell King - ARM Linux
• [PATCH 1/1 v2] usb: at91_udc: fix typo on vubs pullup valid check   Russell King - ARM Linux
• vexpress issues in next-20121029   Russell King - ARM Linux
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Russell King - ARM Linux
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Russell King - ARM Linux
• [PATCH 0/2] clk: ux500: Add some more clk lookups for u8500   Russell King - ARM Linux
• scheduler clock for MXS [Was: Re: Wakeup latency measured with SCHED_TRACER depends on HZ]   Russell King - ARM Linux
• [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock   Russell King - ARM Linux
• [PATCH v2] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Russell King - ARM Linux
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Russell King - ARM Linux
• scheduler clock for MXS   Russell King - ARM Linux
• scheduler clock for MXS [Was: Re: Wakeup latency measured with SCHED_TRACER depends on HZ]   Russell King - ARM Linux
• BUG: ARM build failures due to Xen   Russell King - ARM Linux
• scheduler clock for MXS [Was: Re: Wakeup latency measured with SCHED_TRACER depends on HZ]   Russell King - ARM Linux
• scheduler clock for MXS   Russell King - ARM Linux
• ARM: idle sleep time for hotplugged cpu   Russell King - ARM Linux
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Russell King - ARM Linux
• Building for MMU-less vexpress targets   Russell King - ARM Linux
• scheduler clock for MXS   Russell King - ARM Linux
• [PATCH] ARM: cache-l2x0: move 'l2_wt_override' variable to proper place   Russell King - ARM Linux
• Build failure: drivers/net/wan/wanxlfw.inc   Russell King - ARM Linux
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Russell King - ARM Linux
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Russell King - ARM Linux
• Building for MMU-less vexpress targets   Russell King - ARM Linux
• struct sys_timer .suspend/.resume ignored for ARCH_SA1100/ARCH_PXA?   Russell King - ARM Linux
• [PATCH] ARM: VIC: remove unused irq_base variable   Russell King - ARM Linux
• [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Russell King - ARM Linux
• scheduler clock for MXS   Russell King - ARM Linux
• Build failure: OMAP4430 failed due to exynos4 pinctrl   Russell King - ARM Linux
• [PATCH v3 4/6] ARM: EXYNOS: Add support for Exynos secure firmware   Russell King - ARM Linux
• [PATCH v3 6/6] ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up   Russell King - ARM Linux
• [PATCH v3 0/6] ARM: EXYNOS: Add secure firmware support   Russell King - ARM Linux
• [PATCH v2] Add support for generic BCM SoC chipsets   Russell King - ARM Linux
• [PATCH] ARM: EXYNOS: use BUG_ON where possible   Russell King - ARM Linux
• [PATCH] ARM: add get_user() support for 8 byte types   Russell King - ARM Linux
• [PATCH] ARM: add get_user() support for 8 byte types   Russell King - ARM Linux
• [PATCH] ARM: add get_user() support for 8 byte types   Russell King - ARM Linux
• [PATCH] ARM: add get_user() support for 8 byte types   Russell King - ARM Linux
• [PATCH] ARM: add get_user() support for 8 byte types   Russell King - ARM Linux
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Russell King - ARM Linux
• [PATCH V2 2/5] arm: mvebu: Added initial support for power managmement service unit   Russell King - ARM Linux
• [PATCH V2 4/5] arm: mm: Added support for PJ4B cpu and init routines   Russell King - ARM Linux
• OMAP* Latest build failures   Russell King - ARM Linux
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Russell King - ARM Linux
• OMAP* Latest build failures   Russell King - ARM Linux
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Russell King - ARM Linux
• Kernel uncompression error   Russell King - ARM Linux
• [RFC PATCH 0/3] introduce static_vm for ARM-specific static mapped area   Russell King - ARM Linux
• OMAP* Latest build failures   Russell King - ARM Linux
• OMAP* Latest build failures   Russell King - ARM Linux
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Russell King - ARM Linux
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Russell King - ARM Linux
• [PATCH 01/17] of: add dma-mask binding   Russell King - ARM Linux
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Russell King - ARM Linux
• Kernel uncompression error   Russell King - ARM Linux
• Kernel uncompression error   Russell King - ARM Linux
• Kernel uncompression error   Russell King - ARM Linux
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Russell King - ARM Linux
• ttySAC0 or ttyS0 in 3.6.x ARM Linux?   Russell King - ARM Linux
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Russell King - ARM Linux
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Russell King - ARM Linux
• [RFC 3/3] ARM/AVR32: get rid of serial_at91.h   Russell King - ARM Linux
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Russell King - ARM Linux
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Russell King - ARM Linux
• [RFC 3/3] ARM/AVR32: get rid of serial_at91.h   Russell King - ARM Linux
• OMAP* Latest build failures   Russell King - ARM Linux
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Russell King - ARM Linux
• [PATCH v2] Misc: ARM_CHAR_LCD: Permit the use of a driver on any ARM machine   Russell King - ARM Linux
• [PATCH v2] Misc: ARM_CHAR_LCD: Permit the use of a driver on any ARM machine   Russell King - ARM Linux
• [PATCH] Dove: Attempt to fix PMU/RTC interrupts   Russell King - ARM Linux
• [PATCH] Dove: Fix irq_to_pmu()   Russell King - ARM Linux
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Russell King - ARM Linux
• [PATCH] Dove: Fix irq_to_pmu()   Russell King - ARM Linux
• [PATCH] Dove: Fix irq_to_pmu()   Russell King - ARM Linux
• [PATCH] Dove: Fix irq_to_pmu()   Russell King - ARM Linux
• [RFC] fbdev: arm has __raw I/O accessors, use them in fb.h   Russell King - ARM Linux
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Russell King - ARM Linux
• [PATCH 1/2] Fix build error in pwm-vt8500.c   Russell King - ARM Linux
• [RFC] fbdev: arm has __raw I/O accessors, use them in fb.h   Russell King - ARM Linux
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Russell King - ARM Linux
• KEXEC on ARM cortex-a15   Russell King - ARM Linux
• [PATCH] ARM: add get_user() support for 8 byte types   Russell King - ARM Linux
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Russell King - ARM Linux
• [RFC/PATCH 0/3] CLK: add more devm_* APIs   Russell King - ARM Linux
• [PATCH 2/3] CLK: uninline clk_prepare_enable() and clk_disable_unprepare()   Russell King - ARM Linux
• [PATCH 207/493] i2c: remove use of __devinit   Russell King - ARM Linux
• [PATCH] ARM: decompressor: Enable unaligned memory access for v6 and above   Russell King - ARM Linux
• [PATCH v2] clk: move IM-PD1 clocks to drivers/clk   Russell King - ARM Linux
• [PATCH V5 5/5] arm: mvebu: Added SMP support for Armada XP   Russell King - ARM Linux
• [PATCH 055/493] dma: remove use of __devexit_p   Russell King - ARM Linux
• [PATCH 022/493] ARM: remove CONFIG_HOTPLUG ifdefs   Russell King - ARM Linux
• [PATCH 097/493] scsi: remove use of __devexit_p   Russell King - ARM Linux
• [PATCH 128/493] sound: remove use of __devexit_p   Russell King - ARM Linux
• [PATCH 132/493] Input: remove use of __devexit_p   Russell King - ARM Linux
• [PATCH 192/493] scsi: remove use of __devinit   Russell King - ARM Linux
• [PATCH 198/493] ethernet: remove use of __devinit   Russell King - ARM Linux
• [PATCH 238/493] mtd: remove use of __devinit   Russell King - ARM Linux
• [PATCH 298/493] video: remove use of __devinitdata   Russell King - ARM Linux
• [PATCH 340/493] arm: remove use of __devinitdata   Russell King - ARM Linux
• [PATCH 331/493] ethernet: remove use of __devinitdata   Russell King - ARM Linux
• [PATCH V5 5/5] arm: mvebu: Added SMP support for Armada XP   Russell King - ARM Linux
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Russell King - ARM Linux
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Russell King - ARM Linux
• [PATCH] Dove: Attempt to fix PMU/RTC interrupts   Russell King - ARM Linux
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Russell King - ARM Linux
• OMAP4430 produces boot warnings   Russell King - ARM Linux
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Russell King - ARM Linux
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Russell King - ARM Linux
• [PATCH v2 1/3] CLK: get rid of HAVE_CLK_PREPARE   Russell King - ARM Linux
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Russell King - ARM Linux
• Versatile randconfig build failure   Russell King - ARM Linux
• [PATCH] ARM: implement optimized percpu variable access   Russell King - ARM Linux
• [PATCH 1/1] ARM: cache-l2x0: Fix compile time warnings when !CONFIG_OF   Russell King - ARM Linux
• [PATCH 0/10] Kirkwood ASoC drivers fixes and improvements   Russell King - ARM Linux
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Russell King - ARM Linux
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Russell King - ARM Linux
• [PATCH 0/5] remaining omap multiplatform patches for v3.8 merge window   Russell King - ARM Linux
• [PATCH 0/3] sdhci-dove GPIO support for card detection   Russell King - ARM Linux
• [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove   Russell King - ARM Linux
• [PATCH 1/3] i2c: at91: fix compilation warning   Russell King - ARM Linux
• [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove   Russell King - ARM Linux
• [PATCH] ARM: implement optimized percpu variable access   Russell King - ARM Linux
• [PATCH 0/5] remaining omap multiplatform patches for v3.8 merge window   Russell King - ARM Linux
• New warnings (irqchip move)   Russell King - ARM Linux
• OMAP build now completely broken in latest arm-soc   Russell King - ARM Linux
• OMAP build now completely broken in latest arm-soc   Russell King - ARM Linux
• [question] some question about the residue   Russell King - ARM Linux
• [question] some question about the residue   Russell King - ARM Linux
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Russell King - ARM Linux
• [question] some question about the residue   Russell King - ARM Linux
• [PATCH] ARM: implement optimized percpu variable access   Russell King - ARM Linux
• [rtc-linux] [PATCH v3 1/5] rtc: OMAP: Add system pm_power_off to rtc driver   Russell King - ARM Linux
• OMAP* Latest build failures   Russell King - ARM Linux
• OMAP* Latest build failures   Russell King - ARM Linux
• [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Russell King - ARM Linux
• [PATCH 1/4] rtc: sa1100: enable/disable rtc when probe/remove the device   Russell King - ARM Linux
• [PATCH 4/4] rtc: pxa: request rtc irqs when probe/remove the device   Russell King - ARM Linux
• [PATCH] ARM: Fix page counting in mem_init and show_mem   Russell King - ARM Linux
• [PATCH] backlight: corgi_lcd: Fix WARN_ON() when calling corgi_bl_set_intensity.   Russell King - ARM Linux
• [PATCH v2] ARM: implement optimized percpu variable access   Russell King - ARM Linux
• [PATCH v2] ARM: implement optimized percpu variable access   Russell King - ARM Linux
• [PATCH v2] ARM: implement optimized percpu variable access   Russell King - ARM Linux
• [GIT PULL] ARM: final SoC fixes for 3.7   Russell King - ARM Linux
• [ARM] head.S change broke platform device registration?   Russell King - ARM Linux
• [ARM] head.S change broke platform device registration?   Russell King - ARM Linux
• [PATCH v3] ARM: Factor out cpuid implementor and part number   Russell King - ARM Linux
• [PATCH v3] ARM: Factor out cpuid implementor and part number   Russell King - ARM Linux
• [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Chuansheng Liu
• [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Liu, Chuansheng
• [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Liu, Chuansheng
• [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Chuansheng Liu
• [PATCH] ARM: tegra: retain L2 content over CPU suspend/resume   Joseph Lo
• [PATCH] ARM: tegra: enable data prefetch on L2   Joseph Lo
• [PATCH] ARM: tegra: retain L2 content over CPU suspend/resume   Joseph Lo
• [PATCH V2] ARM: tegra: retain L2 content over CPU suspend/resume   Joseph Lo
• [PATCH V2] ARM: tegra: retain L2 content over CPU suspend/resume   Joseph Lo
• Building for MMU-less vexpress targets   Jamie Lokier
• Building for MMU-less vexpress targets   Jamie Lokier
• [PATCH] ARM: implement optimized percpu variable access   Jamie Lokier
• [PATCH] ARM: implement optimized percpu variable access   Jamie Lokier
• [PATCH] ARM: implement optimized percpu variable access   Jamie Lokier
• [RFC PATCH 0/2] Kirkwood 98dx4122 pinctrl variant   Valentin Longchamp
• [PATCH 1/2] ARM: support 98DX412x kirkwoods with pinctrl   Valentin Longchamp
• [PATCH 2/2] ARM: convert the km_kirkwood board to pinctrl   Valentin Longchamp
• [RFC] arm: memtest   Yinghai Lu
• [PATCH v2 0/2] drivers: mailbox: omap-mailbox out of plat code   Omar Ramirez Luna
• [PATCH v2 1/2] mailbox: OMAP: introduce mailbox framework   Omar Ramirez Luna
• [PATCH v2 2/2] mailbox: split internal header from API header   Omar Ramirez Luna
• [PATCH v2 1/2] mailbox: OMAP: introduce mailbox framework   Omar Ramirez Luna
• [PATCH v2 1/2] mailbox: OMAP: introduce mailbox framework   Omar Ramirez Luna
• [PATCH v2 2/2] mailbox: split internal header from API header   Omar Ramirez Luna
• [PATCH v5 0/6] Move rest of omap-iommu to live in drivers/iommu   Omar Ramirez Luna
• [PATCH v4 0/2] OMAP: iommu: hwmod, reset handling and runtime PM   Omar Ramirez Luna
• [PATCH v4 1/2] ARM: OMAP3/4: iommu: migrate to hwmod framework   Omar Ramirez Luna
• [PATCH v4 2/2] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH] ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks   Omar Ramirez Luna
• [PATCH] ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks   Omar Ramirez Luna
• [PATCH v4 2/2] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH v4 2/2] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH 7/8] ARM: OMAP: Remove unnecessary inclusion of dmtimer.h   Omar Ramirez Luna
• [PATCH v5 0/5] OMAP: iommu: hwmod, reset handling and runtime PM   Omar Ramirez Luna
• [PATCH v5 1/5] iommu/omap: remove redundant clock handling on ISR   Omar Ramirez Luna
• [PATCH v5 2/5] iommu/omap: keep mmu enabled when requested   Omar Ramirez Luna
• [PATCH v5 3/5] iommu/omap: migrate to hwmod framework   Omar Ramirez Luna
• [PATCH v5 4/5] iommu/omap: adapt to runtime pm   Omar Ramirez Luna
• [PATCH v5 5/5] ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks   Omar Ramirez Luna
• [PATCH V2] ARM: kirkwood: Increase NAND chip-delay for DNS-32[05]   Andrew Lunn
• Possible regression in 3.7-rc3 on Marvell Kirkwood   Andrew Lunn
• Possible regression in 3.7-rc3 on Marvell Kirkwood   Andrew Lunn
• Possible regression in 3.7-rc3 on Marvell Kirkwood   Andrew Lunn
• [PATCH V2 1/4] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Andrew Lunn
• [RFC PATCH 0/2] Kirkwood 98dx4122 pinctrl variant   Andrew Lunn
• [PATCH 0/3] GPIO driver to turn power off   Andrew Lunn
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH 2/3] ARM: Kirkwood: Convert DNSKW to use gpio-poweroff.   Andrew Lunn
• [PATCH 3/3] ARM: Kirkwood: Convert IB62x0 to use gpio-poweroff.   Andrew Lunn
• [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Andrew Lunn
• [PATCH] ARM: Orion: Remove redundent init_dma_coherent_pool_size()   Andrew Lunn
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Andrew Lunn
• [PATCH 1/2] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Andrew Lunn
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH 1/2] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Andrew Lunn
• [PATCH v2 0/3] GPIO driver to turn power off   Andrew Lunn
• [PATCH v2 1/3] power: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH v2 2/3] ARM: Kirkwood: Convert DNSKW to use gpio-poweroff.   Andrew Lunn
• [PATCH v2 3/3] ARM: Kirkwood: Convert IB62x0 to use gpio-poweroff.   Andrew Lunn
• [PATCH 0/7] core, cpu and gated clocks for mvebu   Andrew Lunn
• [PATCH 1/7] clk: mvebu: add mvebu core clocks.   Andrew Lunn
• [PATCH 2/7] clk: mvebu: add armada-370-xp CPU specific clocks   Andrew Lunn
• [PATCH 3/7] clk: armada-370-xp: add support for clock framework   Andrew Lunn
• [PATCH 4/7] clocksource: time-armada-370-xp converted to clk framework   Andrew Lunn
• [PATCH 5/7] clk: mvebu: add clock gating control provider for DT   Andrew Lunn
• [PATCH 6/7] ARM: dove: switch to DT clock providers   Andrew Lunn
• [PATCH 7/7] ARM: Kirkwood: switch to DT clock providers   Andrew Lunn
• [PATCH 0/7] core, cpu and gated clocks for mvebu   Andrew Lunn
• [PATCH 1/1] ARM: kirkwood: Add support for the MPL CEC4   Andrew Lunn
• [PATCH 1/1] ARM: kirkwood: Add support for the MPL CEC4   Andrew Lunn
• [PATCH 1/1] ARM: kirkwood: Add support for the MPL CEC4   Andrew Lunn
• [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT   Andrew Lunn
• [PATCH v2 0/3] GPIO driver to turn power off   Andrew Lunn
• [PATCH v2 3/3] ARM: Kirkwood: Convert IB62x0 to use gpio-poweroff.   Andrew Lunn
• [PATCH v2 1/3] power: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH v3 0/3] GPIO driver to turn power off   Andrew Lunn
• [PATCH v3 1/3] power: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH v3 2/3] ARM: Kirkwood: Convert DNSKW to use gpio-poweroff.   Andrew Lunn
• [PATCH v3 3/3] ARM: Kirkwood: Convert IB62x0 to use gpio-poweroff.   Andrew Lunn
• [PULL REQUEST] GPIO driver to turn power off   Andrew Lunn
• [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT   Andrew Lunn
• [PATCH v2 0/9] core, cpu and gated clocks for mvebu   Andrew Lunn
• [PATCH v2 1/9] clk: mvebu: add mvebu core clocks.   Andrew Lunn
• [PATCH v2 2/9] clk: mvebu: add armada-370-xp CPU specific clocks   Andrew Lunn
• [PATCH v2 3/9] clk: armada-370-xp: add support for clock framework   Andrew Lunn
• [PATCH v2 4/9] clocksource: convert time-armada-370-xp to clk framework   Andrew Lunn
• [PATCH v2 5/9] clk: mvebu: add clock gating control provider for DT   Andrew Lunn
• [PATCH v2 6/9] ARM: dove: switch to DT clock providers   Andrew Lunn
• [PATCH v2 7/9] ARM: Kirkwood: switch to DT clock providers   Andrew Lunn
• [PATCH v2 8/9] clk: mvebu: armada 370/XP add clock gating control provider for DT   Andrew Lunn
• [PATCH v2 9/9] arm: mvebu: armada 370/XP adding clock gating support: dt binding   Andrew Lunn
• [PATCH 0/5] ARM: Kirkwood: Use fixed regulators   Andrew Lunn
• [PATCH 1/5] ARM: Kirkwood: Enable regulator and fixed regulators.   Andrew Lunn
• [PATCH 2/5] ARM: Kirkwood: Convert DNSKW to use regulators   Andrew Lunn
• [PATCH 3/5] ARM: Kirkwood: Convert Dockstar to use regulators   Andrew Lunn
• [PATCH 4/5] ARM: Kirkwood: Convert GoFlexNet to use regulators   Andrew Lunn
• [PATCH 5/5] ARM: Kirkwood: Convert LSXL to use regulators   Andrew Lunn
• [PATCH 0/5] ARM: Kirkwood: Use fixed regulators   Andrew Lunn
• [PATCH v2 00/14] Convert Kirkwood DT boards to pinctrl   Andrew Lunn
• [PATCH v2 01/14] GPIO: mvebu: Allow all plat-orion platforms.   Andrew Lunn
• [PATCH v2 02/14] ARM: Kirkwood: Make use of mvebu pincltl and gpio drivers   Andrew Lunn
• [PATCH v2 03/14] ARM: Kirkwood: Add DTSI files for pinctrl   Andrew Lunn
• [PATCH v2 04/14] ARM: Kirkwood: Convert TS219 to pinctrl.   Andrew Lunn
• [PATCH v2 05/14] ARM: Kirkwood: Convert iConnect to pinctrl.   Andrew Lunn
• [PATCH v2 06/14] ARM: Kirkwood: Convert dnskw to pinctrl   Andrew Lunn
• [PATCH v2 07/14] ARM: Kirkwood: Convert dockstar to pinctrl.   Andrew Lunn
• [PATCH v2 08/14] ARM: Kirkwood: Convert dreamplug to pinctrl.   Andrew Lunn
• [PATCH v2 09/14] ARM: Kirkwood: Convert GoFlex Net to pinctrl.   Andrew Lunn
• [PATCH v2 10/14] ARM: Kirkwood: Convert ib62x0 to pinctrl.   Andrew Lunn
• [PATCH v2 11/14] ARM: Kirkwood: Convert lsxl boards to pinctrl.   Andrew Lunn
• [PATCH v2 12/14] ARM: Kirkwood: Convert IX2-200 to pinctrl.   Andrew Lunn
• [PATCH v2 13/14] ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl   Andrew Lunn
• [PATCH v2 14/14] ARM: Kirkwood: Convert km_kirkwood to pinctrl   Andrew Lunn
• [PATCH 14/14] ARM: Kirkwood: Convert the km_kirkwood board to pinctrl   Andrew Lunn
• [PATCH 14/14] ARM: Kirkwood: convert the km_kirkwood board to pinctrl   Andrew Lunn
• [PATCH] DMA: mv_xor: Add a device_control function   Andrew Lunn
• [PATCH] DMA: mv_xor: Add a device_control function   Andrew Lunn
• [PATCH] Device Tree binding for the 'mv_xor' XOR engine DMA driver   Andrew Lunn
• [PATCH v2 1/2] DMA: mv_xor: Add a device_control function   Andrew Lunn
• [PATCH v2 2/2] ARM: Kirkwood: Convert XOR instantiation to DT.   Andrew Lunn
• [PATCH] Device Tree binding for the 'mv_xor' XOR engine DMA driver   Andrew Lunn
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Andrew Lunn
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Andrew Lunn
• [PATCH v2 2/2] ARM: Kirkwood: Convert XOR instantiation to DT.   Andrew Lunn
• [GIT PULL] arm: orion5x: begin the DT conversion   Andrew Lunn
• [Patch v1 1/1] RTL8712 alignment bug in 3.6.5 on ARM   Andrew Lunn
• [PATCH] Dove: Fix irq_to_pmu()   Andrew Lunn
• [PATCH] Device Tree binding for the 'mv_xor' XOR engine DMA driver   Andrew Lunn
• [PATCH v2 2/2] ARM: Kirkwood: Convert XOR instantiation to DT.   Andrew Lunn
• [PATCH 0/1 V2] ARM: kirkwood: Add support for the MPL CEC4   Andrew Lunn
• [PATCH 1/1] ARM: kirkwood: Convert mplcec4 board to pinctrl   Andrew Lunn
• [PATCH 0/1] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Andrew Lunn
• [PATCH 0/1] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Andrew Lunn
• [PATCH 0/1] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Andrew Lunn
• [PATCH 0/1 V2] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Andrew Lunn
• [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT   Andrew Lunn
• [PATCH 1/7] clk: mvebu: init all mvebu clock types from mvebu_clocks_init()   Andrew Lunn
• arm: mvebu: Various mvebu clock fixes/improvements   Andrew Lunn
• [PATCH 4/7] arm: mvebu: move DT cpu clock nodes to the Armada XP specific .dtsi   Andrew Lunn
• [PATCH v3 1/3] power: Add simple poweroff-gpio driver   Andrew Lunn
• arm: mvebu: Various mvebu clock fixes/improvements   Andrew Lunn
• [PATCH v3 1/3] power: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH v3 1/3] power: Add simple poweroff-gpio driver   Andrew Lunn
• [PATCH] ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan   Andrew Lunn
• [PATCH] Dove: Attempt to fix PMU/RTC interrupts   Andrew Lunn
• [PATCH] ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan   Andrew Lunn
• [PATCH] ARM: Kirkwood: Support basic hotplug for PCI-E   Andrew Lunn
• [PATCH] ARM: kirkwood: Add Plat'Home OpenBlocks A6 support   Andrew Lunn
• [PATCH] ARM: Kirkwood: Add support LED of OpenBlocks A6   Andrew Lunn
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Andrew Lunn
• [PATCH v5 0/4] arch/arm: support seccomp   Andy Lutomirski
• [PATCH for soc] socfpga: map uart into virtual address space so that early_printk() works   Pavel Machek
• [PATCH V2] ARM: tegra: retain L2 content over CPU suspend/resume   Pavel Machek
• [PATCH v2 0/4] RFC: OMAP GPMC DT bindings   Daniel Mack
• [PATCH v2 1/4] mtd: omap-nand: pass device_node in platform data   Daniel Mack
• [PATCH v2 2/4] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Daniel Mack
• [PATCH v2 3/4] ARM: OMAP: gpmc: don't create devices from initcall on DT   Daniel Mack
• [PATCH v2 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v2 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v3 0/4] RFC: OMAP GPMC DT bindings   Daniel Mack
• [PATCH v3 1/4] mtd: omap-nand: pass device_node in platform data   Daniel Mack
• [PATCH v3 2/4] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Daniel Mack
• [PATCH v3 3/4] ARM: OMAP: gpmc: don't create devices from initcall on DT   Daniel Mack
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v2 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v2 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [RFC 00/15] Add basic suspend-resume support for AM33XX   Daniel Mack
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v2 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v4 0/3] OMAP GPMC DT bindings   Daniel Mack
• [PATCH v4 1/3] mtd: omap-nand: pass device_node in platform data   Daniel Mack
• [PATCH v4 2/3] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Daniel Mack
• [PATCH v4 3/3] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v4 3/3] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v4 3/3] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v5 0/4] OMAP GPMC DT bindings   Daniel Mack
• [PATCH v5 1/4] mtd: omap-nand: pass device_node in platform data   Daniel Mack
• [PATCH v5 2/4] ARM: OMAP: gpmc-nand: drop __init annotation   Daniel Mack
• [PATCH v5 3/4] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Daniel Mack
• [PATCH v5 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH RESEND v5 0/4] OMAP GPMC DT bindings   Daniel Mack
• [PATCH v5 1/4] mtd: omap-nand: pass device_node in platform data   Daniel Mack
• [PATCH v5 2/4] ARM: OMAP: gpmc-nand: drop __init annotation   Daniel Mack
• [PATCH v5 3/4] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Daniel Mack
• [PATCH v5 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v5 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH RESEND v5 0/4] OMAP GPMC DT bindings   Daniel Mack
• [PATCH v5 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v5 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH RESEND v5 0/4] OMAP GPMC DT bindings   Daniel Mack
• [PATCH v6 0/5] OMAP GPMC DT bindings   Daniel Mack
• [PATCH v6 1/5] ARM: OMAP: gpmc: don't create devices from initcall on DT   Daniel Mack
• [PATCH v6 2/5] mtd: omap-nand: pass device_node in platform data   Daniel Mack
• [PATCH v6 3/5] ARM: OMAP: gpmc-nand: drop __init annotation   Daniel Mack
• [PATCH v6 4/5] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Daniel Mack
• [PATCH v6 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH v6 4/5] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Daniel Mack
• [PATCH v6 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Daniel Mack
• [PATCH 04/11] ARM: set arch_gettimeoffset directly   Ryan Mallon
• [PATCH 04/11] ARM: set arch_gettimeoffset directly   Ryan Mallon
• [PATCH] video: da8xx-fb: clk_get on connection id fck   Manjunathappa
• [PATCH] video: da8xx-fb: clk_get on connection id fck   Manjunathappa, Prakash
• [PATCH] arm/dts: Add basic support for gta04 (Openmoko next generation) board.   Belisko Marek
• [PATCH] arm/dts: Add basic support for gta04 (Openmoko next generation) board.   Belisko Marek
• [PATCH linux-next] ARM64: dma-mapping: support debug_dma_mapping_error   Catalin Marinas
• [PATCH] clocksource: arm_generic: use integer math helpers   Catalin Marinas
• [PATCH] ARM: Fix the "WFI" instruction opcode definition.   Catalin Marinas
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Catalin Marinas
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Catalin Marinas
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Catalin Marinas
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Catalin Marinas
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Catalin Marinas
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Catalin Marinas
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Catalin Marinas
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Catalin Marinas
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Catalin Marinas
• [PATCH V3 4/5] arm: mm: Added support for PJ4B cpu and init routines   Catalin Marinas
• [PATCH 284/493] arm64: remove use of __devinit   Catalin Marinas
• [PATCH V7 1/7] kbuild: centralize .dts->.dtb rule   Catalin Marinas
• [PATCH V7 3/7] arm64: use new common dtc rule   Catalin Marinas
• [PATCH] ARM64: Remove incorrect Kconfig symbol HAVE_SPARSE_IRQ   Catalin Marinas
• [PATCH v3 1/3] ARM: imx27_visstrim_m10: Do not reserve VPU DMA pool on board file   javier Martin
• [PATCH 1/2] ARM: i.MX27: Add platform support for IRAM.   javier Martin
• [PATCH] ARM: stacktrace: Fix return_address() for CONFIG_FRAME_POINTER   Dave Martin
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Dave Martin
• [PATCH] ARM: backtrace: avoid crash on large invalid fp value   Dave Martin
• [PATCH RESEND] xen/arm: use the __HVC macro   Dave Martin
• [PATCH] arm/crypto: Make asm SHA-1 and AES code Thumb-2 compatible   Dave Martin
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Dave Martin
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Dave Martin
• [PATCH] ARM: Fix the "WFI" instruction opcode definition.   Dave Martin
• [PATCH] ARM: decompressor: Enable unaligned memory access for v6 and above   Dave Martin
• [PATCH] ARM: Fix the "WFI" instruction opcode definition.   Dave Martin
• [PATCH] ARM: backtrace: avoid crash on large invalid fp value   Dave Martin
• [PATCH v2 2/5] ARM: kernel: add device tree init map function   Dave Martin
• [PATCH v2 2/5] ARM: kernel: add device tree init map function   Dave Martin
• [PATCH] ARM: backtrace: avoid crash on large invalid fp value   Dave Martin
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Dave Martin
• [PATCH] ARM: decompressor: Enable unaligned memory access for v6 and above   Dave Martin
• [PATCH] arm/crypto: Make asm SHA-1 and AES code Thumb-2 compatible   Dave Martin
• [ARM] head.S change broke platform device registration?   Dave Martin
• [PATCH v4 14/14] KVM: ARM: Handle I/O aborts   Dave Martin
• [PATCH 1/2] ARM: i.MX27: Add platform support for IRAM.   Javier Martin
• [PATCH 2/2] media: coda: Use iram_alloc() for codadx6 too.   Javier Martin
• [PATCH 6/9] uprobes: flush cache after xol write   Ananth N Mavinakayanahalli
• [kvmarm] [PATCH v3 01/13] KVM: ARM: Introduce KVM_SET_DEVICE_ADDRESS ioctl   Peter Maydell
• [kvmarm] [PATCH v4 09/14] KVM: ARM: Emulation framework and CP15 emulation   Peter Maydell
• vexpress compilation error in next-20121127   Markus Mayer
• vexpress compilation error in next-20121127   Markus Mayer
• Branches next/soc and for-next   Markus Mayer
• vexpress compilation error in next-20121127   Markus Mayer
• OMAP baseline test results for v3.7-rc5   Igor Mazanov
• [PATCH] Remove inline from clock framework function definitions to build the kernel with GCC 4.7   Igor Mazanov
• OMAP baseline test results for v3.7-rc5   Igor Mazanov
• [PATCH] Remove inline from clock framework function definitions to build the kernel with GCC 4.7   Igor Mazanov
• [PATCH] OMAP2+: enable TPS65217 support in omap2plus_defconfig   Igor Mazanov
• [PATCH] OMAP2+: enable TPS65217 support in omap2plus_defconfig   Igor Mazanov
• [PATCH v2] ARM: OMAP2+: omap2plus_defconfig: Enable TPS65217 PMIC   Igor Mazanov
• [PATCH v3 5/5] ARM: OMAP2+: omap2plus_defconfig: Enable RTC support   Igor Mazanov
• [PATCH] arm/crypto: Make asm SHA-1 and AES code Thumb-2 compatible   David McCullough
• [PATCH] arm/crypto: Make asm SHA-1 and AES code Thumb-2 compatible   David McCullough
• scheduler clock for MXS [Was: Re: Wakeup latency measured with SCHED_TRACER depends on HZ]   Stanislav Meduna
• scheduler clock for MXS [Was: Re: Wakeup latency measured with SCHED_TRACER depends on HZ]   Stanislav Meduna
• scheduler clock for MXS   Stanislav Meduna
• scheduler clock for MXS   Stanislav Meduna
• scheduler clock for MXS   Stanislav Meduna
• [PATCH] ARM: mxs: Setup scheduler clock   Stanislav Meduna
• [RFC PATCH] ARM: OMAP4: ID: Improve features detection and check   Nishanth Menon
• [PATCH] ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC   Nishanth Menon
• [PATCH 06/11] ARM: pxa: convert timer suspend/resume to clock_event_device   Eric Miao
• [PATCH 270/493] arm: remove use of __devinit   Eric Miao
• [PATCH 032/493] arm: remove use of __devexit_p   Eric Miao
• [PATCH 243/493] pcmcia: remove use of __devinit   Eric Miao
• [PATCH 484/493] arm: remove use of __devexit   Eric Miao
• [PATCH] ARM: use clockevents_config_and_register() where possible   Eric Miao
• i2c support for imx23 linux-3.7-rc3 imx23-olinuxino   Tim Michals
• [PATCH] add hardware I2C support for ARM IMX23   Tim Michals
• [PATCH] add hardware I2C support for ARM IMX23   Tim Michals
• [PATCH v4 00/10] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   David Miller
• [PATCH net-next V3 00/10] Support the CPTS as a PTP Hardware Clock   David Miller
• [PATCH 0/4] Support the MX6 FEC as a PTP hardware clock   David Miller
• [PATCH] net/at91_ether: fix the use of macb structure   David Miller
• [PATCH net-next] macb: Keep driver's speed/duplex in sync with actual NCFGR   David Miller
• [PATCH net-next 0/2] cpsw: fix resource leak for v3.8   David Miller
• [PATCH 15/16] mm: use vm_unmapped_area() on sparc32 architecture   David Miller
• [PATCH 15/16] mm: use vm_unmapped_area() on sparc32 architecture   David Miller
• [PATCH 0/2 v2] net: at91_ether add dt and pinctrl support   David Miller
• [PATCH net-next 1/2] ARM: net: bpf_jit_32: add XOR instruction for BPF JIT   David Miller
• [PATCH] wanrouter: Remove it and the drivers that depend on it   David Miller
• [PATCH V2] wanrouter: Remove it and the drivers that depend on it   David Miller
• [PATCH net-next 1/2] ARM: net: bpf_jit_32: add XOR instruction for BPF JIT   David Miller
• [PATCH net-next 2/2] ARM: net: bpf_jit_32: add VLAN instructions for BPF JIT   David Miller
• [PATCH v7] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   David Miller
• [PATCH V5 0/7] ARM: AM33XX: net: Add DT support to CPSW and MDIO driver   David Miller
• [PATCH v7] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   David Miller
• [PATCH 3/3] net: mvneta: adjust multiline comments to net/ style   David Miller
• [GIT PULL] Marvell mvneta Ethernet/MDIO drivers checkpatch fixes   David Miller
• [PATCH v2] net/macb: move to circ_buf macros and fix initial condition   David Miller
• [PATCH 1/1 v2] net: add micrel KSZ8873MLL switch support   David Miller
• [PATCH 1/1 v2] asix: use ramdom hw addr if the one read is not valid   David Miller
• [PATCH] net/macb: GEM DMA configuration register update   David Miller
• [PATCH net-next] cpts: add missing kconfig dependency   David Miller
• [PATCH 1/1] net: ethernet: cpsw: fix build warnings for CPSW when CPTS not selected   David Miller
• [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Soeren Moch
• [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Soeren Moch
• [PATCH V2 1/4] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Sören Moch
• [PATCH V2 1/4] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Sören Moch
• [PATCH] ARM: dts: AM33XX: Add usbss node   Afzal Mohammed
• [PATCH v2] ARM: dts: AM33XX: Add usbss node   Afzal Mohammed
• [GIT PULL] ARM: OMAP: GPMC generic timing   Afzal Mohammed
• [PATCH 1/2] leds: Add generic support for memory mapped LEDs   Pawel Moll
• [PATCH 2/2] mfd: vexpress-sysreg: Use MMIO driver for platform LEDs   Pawel Moll
• [PATCH 1/2] leds: Add generic support for memory mapped LEDs   Pawel Moll
• vexpress issues in next-20121029   Pawel Moll
• vexpress issues in next-20121029   Pawel Moll
• Building for MMU-less vexpress targets   Pawel Moll
• vexpress issues in next-20121029   Pawel Moll
• [GIT PULL] vexpress: fixes for v3.8   Pawel Moll
• [PATCH 1/2] leds: Add generic support for memory mapped LEDs   Pawel Moll
• vexpress issues in next-20121029   Pawel Moll
• [PATCH 1/2] leds: Add generic support for memory mapped LEDs   Pawel Moll
• [PATCH] mfd: vexpress-sysreg: Remove LEDs code   Pawel Moll
• [PATCH v3] video: Versatile Express DVI output driver   Pawel Moll
• [PATCH v3] video: Versatile Express DVI output driver   Pawel Moll
• [PATCH v4] video: Versatile Express DVI output driver   Pawel Moll
• [PATCH] ARM: Kconfig: Do not select ARCH_VEXPRESS on ARCH_MULTI_V7   Pawel Moll
• [PATCH] ARM: Kconfig: Do not select ARCH_VEXPRESS on ARCH_MULTI_V7   Pawel Moll
• [PATCH 1/2] leds: Add generic support for memory mapped LEDs   Pawel Moll
• [PATCH 1/2] leds: Add generic support for memory mapped LEDs   Pawel Moll
• [PATCH] mfd: vexpress-sysreg: Remove LEDs code   Pawel Moll
• vexpress compilation error in next-20121127   Pawel Moll
• vexpress compilation error in next-20121127   Pawel Moll
• [PATCH] sh: clkfwk: fixup unsed variable warning   Kuninori Morimoto
• [PATCH v5 00/15] shmobile DT initialisation of INTC and GIC   Kuninori Morimoto
• [PATCH 1/1] asix: use ramdom hw addr if the one read is not valid   Bjørn Mork
• [PATCH 00/16] mm: use augmented rbtrees for finding unmapped areas   Andrew Morton
• [PATCH 03/16] mm: check rb_subtree_gap correctness   Andrew Morton
• [PATCH 07/16] mm: fix cache coloring on x86_64 architecture   Andrew Morton
• [PATCH 09/16] mm: use vm_unmapped_area() in hugetlbfs on i386 architecture   Andrew Morton
• [PATCH 10/16] mm: use vm_unmapped_area() on mips architecture   Andrew Morton
• [PATCH 11/16] mm: use vm_unmapped_area() on arm architecture   Andrew Morton
• [PATCH resend] rtc: i.MX dryice: Add devicetree support   Andrew Morton
• [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Andrew Morton
• [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Andrew Morton
• [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Andrew Morton
• [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Andrew Morton
• [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Andrew Morton
• [rtc-linux] [PATCH v3 1/5] rtc: OMAP: Add system pm_power_off to rtc driver   Andrew Morton
• [PATCH] backlight: corgi_lcd: Use gpio_set_value_cansleep() for akita machines to avoid WARN_ON trigger   Andrew Morton
• [PATCH 01/10] ARM: imx6q: print silicon version on boot   Moseley, Drew
• [RFC] dt/platform: Use cell-index for device naming if available   Stepan Moskovchenko
• [RFC] dt/platform: Use cell-index for device naming if available   Stepan Moskovchenko
• [RFC] dt/platform: Use cell-index for device naming if available   Stepan Moskovchenko
• [RFC] dt/platform: Use cell-index for device naming if available   Stepan Moskovchenko
• [RFC] dt/platform: Use cell-index for device naming if available   Stepan Moskovchenko
• ARM: idle sleep time for hotplugged cpu   Steve Muckle
• [PATCH] Update ARM/SHMOBILE section of MAINTAINERS   Paul Mundt
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Andrew Murray
• [RFC v2 PATCH 0/2] sched: Integrating Per-entity-load-tracking with the core scheduler   Preeti U Murthy
• [RFC v2 PATCH 1/2] sched: Revert temporary FAIR_GROUP_SCHED dependency for load-tracking   Preeti U Murthy
• [RFC v2 PATCH 2/2] sched: Use Per-Entity-Load-Tracking metric for load balancing   Preeti U Murthy
• [RFC v2 PATCH 2/2] sched: Use Per-Entity-Load-Tracking metric for load balancing   Preeti U Murthy
• [PATCH] sched: Explicit division calls on 64-bit integers   Preeti U Murthy
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   N, Mugunthan V
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   N, Mugunthan V
• [PATCH net-next 0/2] cpsw: fix resource leak for v3.8   N, Mugunthan V
• [PATCH 0/7] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver   Mugunthan V N
• [PATCH 1/7] net: davinci_mdio: Fix typo mistake in calling runtime-pm api   Mugunthan V N
• [PATCH 2/7] net: cpsw: Add parent<->child relation support between cpsw and mdio   Mugunthan V N
• [PATCH 3/7] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module   Mugunthan V N
• [PATCH 4/7] cpsw: simplify the setup of the register pointers   Mugunthan V N
• [PATCH 5/7] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Mugunthan V N
• [PATCH 6/7] ARM: OMAP2+: omap2plus_defconfig: Enable CPSW support   Mugunthan V N
• [PATCH 7/7] net: cpsw: halt network stack before halting the device during suspend   Mugunthan V N
• [PATCH 3/7] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module   Mugunthan V N
• [PATCH 3/7] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module   Mugunthan V N
• [PATCH V4 0/7] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver   Mugunthan V N
• [PATCH V4 1/7] net: davinci_mdio: Fix typo mistake in calling runtime-pm api   Mugunthan V N
• [PATCH V4 2/7] net: cpsw: Add parent<->child relation support between cpsw and mdio   Mugunthan V N
• [PATCH V4 3/7] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module   Mugunthan V N
• [PATCH V4 4/7] cpsw: simplify the setup of the register pointers   Mugunthan V N
• [PATCH V4 5/7] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Mugunthan V N
• [PATCH V4 6/7] ARM: OMAP2+: omap2plus_defconfig: Enable CPSW support   Mugunthan V N
• [PATCH V4 7/7] net: cpsw: halt network stack before halting the device during suspend   Mugunthan V N
• [PATCH V4 0/7] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver   Mugunthan V N
• [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Mugunthan V N
• [PATCH V5 0/7] ARM: AM33XX: net: Add DT support to CPSW and MDIO driver   Mugunthan V N
• [PATCH V5 1/7] net: davinci_mdio: Fix typo mistake in calling runtime-pm api   Mugunthan V N
• [PATCH V5 2/7] net: cpsw: Add parent<->child relation support between cpsw and mdio   Mugunthan V N
• [PATCH V5 3/7] cpsw: simplify the setup of the register pointers   Mugunthan V N
• [PATCH V5 4/7] net: cpsw: halt network stack before halting the device during suspend   Mugunthan V N
• [PATCH V5 5/7] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module   Mugunthan V N
• [PATCH V5 6/7] ARM: OMAP2+: omap2plus_defconfig: Enable CPSW support   Mugunthan V N
• [PATCH V5 7/7] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX   Mugunthan V N
• [PATCH 1/1] ARM: dts: am335x-evmsk: Add cpsw phy_id   Mugunthan V N
• [PATCH 1/1] ARM: OMAP: fix build error in arch/arm/mach-omap2/timer.c   Mugunthan V N
• [PATCH 1/1] net: cpts: fix for build break after ARM SoC integration   Mugunthan V N
• linux-next: manual merge of the arm-soc tree with the net-next tree   Mugunthan V N
• [PATCH 1/1] net: cpts: fix for build break after ARM SoC integration   Mugunthan V N
• [PATCH 1/1] net: ethernet: cpsw: fix build warnings for CPSW when CPTS not selected   Mugunthan V N
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Sudeep K N
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Sudeep K N
• [PATCH 1/1] arm: tegra: select correct parent clk for pll_p   Sivaram Nair
• [PATCH 1/1] arm: tegra: fix comment in dsib clk set_parent   Sivaram Nair
• [PATCH 1/1] ARM: tegra: replace long if statement group   Sivaram Nair
• [PATCH 1/2] ARM: tegra: remove unused functions in mach/clk.h   Sivaram Nair
• [PATCH 2/2] ARM: tegra: moving stuff away from mach/clk.h   Sivaram Nair
• [PATCH 3/5] ARM: Exynos: add device tree support for MCT controller driver   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS: Make s3c_device_i2c0 always use id 0   Sylwester Nawrocki
• [PATCH 1/2] ARM: S3C24XX: Add clkdev entry for camif-upll clock   Sylwester Nawrocki
• [PATCH 2/2] ARM: S3C64XX: Statically define parent clock of the "camera" clock   Sylwester Nawrocki
• [PATCH 2/2] ARM: S3C64XX: Statically define parent clock of the "camera" clock   Sylwester Nawrocki
• [PATCH] ARM: S3C64XX: Statically define parent clock of the "camera" clock   Sylwester Nawrocki
• [PATCH] ARM: S3C64XX: Statically define parent clock of the "camera" clock   Sylwester Nawrocki
• [PATCH] ARM: S3C64XX: Statically define parent clock of the "camera" clock   Sylwester Nawrocki
• [PATCH 2/2] ARM: S3C64XX: Staticly define parent clock of "camera" clock   Sylwester Nawrocki
• [PATCH 1/2] ARM: S3C64XX: Remove duplicated camera clock   Sylwester Nawrocki
• [PATCH 2/2] ARM: S3C64XX: Staticly define parent clock of "camera" clock   Sylwester Nawrocki
• [PATCH] ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers   Sylwester Nawrocki
• [PATCH 1/6] arch: Change defconfigs to point to g_mass_storage.   Michal Nazarewicz
• [PATCHv2 1/6] arch: Change defconfigs to point to g_mass_storage.   Michal Nazarewicz
• [PATCHv3 1/6] arch: Change defconfigs to point to g_mass_storage.   Michal Nazarewicz
• [PATCH 1/6] ARM/dts: omap4-panda: Add pinmux configuration for HDMI   Ricardo Neri
• [PATCH 1/6] ARM/dts: omap4-panda: Add pinmux configuration for HDMI   Ricardo Neri
• [PATCH 6/9] uprobes: flush cache after xol write   Oleg Nesterov
• [PATCH 6/9] uprobes: flush cache after xol write   Oleg Nesterov
• [PATCH 2/5] ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support   Jarkko Nikula
• [PATCH 01/11] cris: move usec/nsec conversion to do_slow_gettimeoffset   Jesper Nilsson
• [PATCH 02/11] time: convert arch_gettimeoffset to a pointer   Jesper Nilsson
• [PATCH v3 01/11] clk: davinci - add main PLL clock driver   Sekhar Nori
• [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver   Sekhar Nori
• [PATCH v3 04/11] clk: davinci - add pll divider clock driver   Sekhar Nori
• [PATCH v3 04/11] clk: davinci - add pll divider clock driver   Sekhar Nori
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Sekhar Nori
• [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver   Sekhar Nori
• [PATCH v3 05/11] clk: davinci - add dm644x clock initialization   Sekhar Nori
• [PATCH v3 10/11] ARM: davinci - migrate to common clock   Sekhar Nori
• [PATCH v3 06/11] clk: davinci - add build infrastructure for DaVinci clock drivers   Sekhar Nori
• [PATCH v3 07/11] ARM: davinci - restructure header files for common clock migration   Sekhar Nori
• [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver   Sekhar Nori
• [PATCH v3 05/11] clk: davinci - add dm644x clock initialization   Sekhar Nori
• [PATCH v3 06/11] clk: davinci - add build infrastructure for DaVinci clock drivers   Sekhar Nori
• [PATCH v3 07/11] ARM: davinci - restructure header files for common clock migration   Sekhar Nori
• [PATCH v3 05/11] clk: davinci - add dm644x clock initialization   Sekhar Nori
• [GIT PULL] DaVinci fix for v3.7   Sekhar Nori
• [GIT PULL] DaVinci fix for v3.7   Sekhar Nori
• [GIT PULL 4/6] DaVinci DT updates for v3.8   Sekhar Nori
• [PATCH] davinci: vpbe: pass different platform names to handle different ip's   Sekhar Nori
• [PATCH v3 2/6] ARM: davinci: Changed pr_warning() to pr_warn() (part 2)   Sekhar Nori
• [PATCH v3 5/6] ARM: davinci: remoteproc board support for OMAP-L138 DSP   Sekhar Nori
• [PATCH v3 6/6] ARM: davinci: remoteproc driver support for OMAP-L138 DSP   Sekhar Nori
• [PATCH] video: da8xx-fb: clk_get on connection id fck   Sekhar Nori
• [PATCH 1/1] ARM: OMAP2+: enable devtmpfs and devtmpfs automount   Sekhar Nori
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Sekhar Nori
• [PATCH] ARM: davinci: da8xx_register_spi() should not register SPI board info   Sekhar Nori
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Sekhar Nori
• [PATCH v3 5/6] ARM: davinci: remoteproc board support for OMAP-L138 DSP   Sekhar Nori
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Hector Oron
• [PATCH 6/8] mfd/ab8500-core: use irq_domain_add_simple()   Samuel Ortiz
• [PATCH 7/8] mfd/db8500-prcmu: use the irq_domain_add_simple()   Samuel Ortiz
• [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver   Samuel Ortiz
• [PATCH 0/8] mfd: Batch together MFD related patches   Samuel Ortiz
• [PATCH v3 2/5] mfd: tps65217: Set PMIC to shutdown on PWR_EN toggle   Samuel Ortiz
• [PATCH 2/2] mfd: ab8500-core: Add abx500-clk as an mfd child device   Samuel Ortiz
• [PATCH 2/5] mfd: db8500: Update cpufreq device name   Samuel Ortiz
• [PATCH] mfd: ab8500-core: Fix invalid free of devm_ allocated data   Samuel Ortiz
• [PATCH 2/5] mfd: db8500: Update cpufreq device name   Samuel Ortiz
• [PATCH v2 2/2] mailbox: split internal header from API header   Loic PALLARDY
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 00/10] net/macb: driver enhancement concerning GEM support, ring logic and cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9] ARM: at91: Remove unused struct at91sam9g45_isi_device and its resources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] net: at91_ether add dt and pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 0/6] DT support for AT91RM9200   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] net: at91_ether: add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] net: at91_ether: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mtd: physmap_of: allow to specify the mtd name for retro compatiblity   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 0/6] DT support for AT91RM9200   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2 v2] net: at91_ether add dt and pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2 v2] net: at91_ether: add dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2 v2] net: at91_ether: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] usb: at91_udc: fix typo on vubs pullup valid check   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] usb: at91_udc: fix typo on vubs pullup valid check   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 0/6] DT support for AT91RM9200   Jean-Christophe PLAGNIOL-VILLARD
• [RFC patch v3 1/4] ARM: at91: atmel-ssc: add platform device id table   Jean-Christophe PLAGNIOL-VILLARD
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• arm: at91: mach header cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/10] arm: at91: drop machine defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/10] arm: at91 move board.h to arch/arm/mach-at91   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/10] arm: at91 move at91_aic.h to arch/arm/mach-at91   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/10] arn: at91: move at91_tc.h to arch/arm/mach-at91   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/10] arm: at91: move board header to arch/arm/mach-at91   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/10] arm: at91: move at91_shdwc.h to arch/arm/mach-at91   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/10] arm: at91: move pit define to the driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/10] arm: at91: move reset controller header to arm/arm/mach-at91   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/10] arm: at91: move at91rm9200 rtc header in drivers/rtc   Jean-Christophe PLAGNIOL-VILLARD
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] ARM: AT91SAM9G45: same platform data structure for all crypto peripherals   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] ARM: AT91SAM9G45: fix crypto peripherals irq issue due to sparse irq support.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mtd: physmap_of: allow to specify the mtd name for retro compatiblity   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5 v2] ARM: AT91SAM9G45: same platform data structure for all crypto peripherals   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5 v2] ARM: AT91SAM9G45: same platform data structure for all crypto peripherals   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] ARM: at91: remove obsoleted init_consistent_dma_size()   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v4 2/2] ASoC: sam9g20-wm8731: convert to dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] ARM: at91: convert timer suspend/resume to clock_event_device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/17] of: add dma-mask binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] i2c: at91: fix SMBus quick command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RESEND 3/4] pinctrl: at91: Prevent NULL dereference if of_match_device returns NULL   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] Boottime: measure bootloader and kernel bootup time   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] Boottime: measure bootloader and kernel bootup time   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mtd: physmap_of: allow to specify the mtd name for retro compatiblity   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] of_spi: add generic binding support to specify cs gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RESEND 3/4] pinctrl: at91: Prevent NULL dereference if of_match_device returns NULL   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 3/3] ARM/AVR32: get rid of serial_at91.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] arm: at91: add Ronetix pm9g45 board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] watchdog/at91sam9_wdt: change the wdt_read and wdt_write macro to the inline function   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/11] watchdog/at91sam9_wdt: use watchdog framework, support DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/11] watchdog/at91sam9_wdt: remove the file_operations struct   Jean-Christophe PLAGNIOL-VILLARD
• arm: at91: mach header cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] atmel: move ATMEL_MAX_UART to platform_data/atmel.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] OF: Add helper for matching against linux,stdout-path   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] net/macb: move to circ_buf macros and fix initial condition   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL] at91: fixes for 3.7-rc7   Jean-Christophe PLAGNIOL-VILLARD
• [For 3.8 PATCH 0/5] pinctrl-at91: add missing mux + gpio name + fix   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] pinctrl: at91: provide gpio names   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] pinctrl: at91 add deglitch, debounce, pull down and schmitt trigger mux option support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] ARM: at91sam9: add macb pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] ARM: at91: fix usart/uart namimg in pinctrl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] ARM: at91: dt: at91sam9260: split rts and cts pinctrl not   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ARM: at91: add Somfy Animeo IP board support   Jean-Christophe PLAGNIOL-VILLARD
• [PULL pinctrl-for 3.8] at91 update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] gpio: dt: add gpio-export support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] gpiolib: add gpio_export_with_name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] gpiolib-of: ad gpio-export support   Jean-Christophe PLAGNIOL-VILLARD
• [For 3.8 PATCH 0/5] pinctrl-at91: add missing mux + gpio name + fix   Jean-Christophe PLAGNIOL-VILLARD
• [PULL pinctrl-for 3.8] at91 update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] asix: use ramdom hw addr if the one read is not valid   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: add micrel KSZ8873MLL switch support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mmc:atmel-mci: use devm_gpio_request/free and configure the pin corrently   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 195/493] pinctl: remove use of __devinit   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 318/493] pinctrl: remove use of __devinitdata   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 138/493] pinctrl: remove use of __devexit_p   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] at91: mmc suport + pinctrl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] ARM: at91: dt: at91sam9: add mmc pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] ARM: at91: dt: add mmc pinctrl for Atmel reference boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: at91: Animeo IP: add mmc support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] ARM: at91: pm9g45: add mmc support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ARM: at91: Animeo IP: enable watchdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] net: add micrel KSZ8873MLL switch support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5] linux,stdout-path helper   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] OF: Add helper for matching against linux,stdout-path   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] serial: i.MX: Make console support non optional   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] serial: i.MX: evaluate linux,stdout-path property   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] tty: Atmel serial: add linux,stdout-path support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] OF: Add helper for matching against linux,stdout-path   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] asix: use ramdom hw addr if the one read is not valid   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] DMA: AT91: Serial: Add parameter for serial dma use   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] OF: Add helper for matching against linux,stdout-path   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] spi/atmel: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] at91: spi suport + pinctrl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: at91: sam9: add spi dt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: at91: dt: sam9m10g45ek add spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ARM: at91: usb-a9g20: dt: add mmc-spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] gpio: dt: add gpio-export support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] gpiolib: add gpio_export_with_name   Jean-Christophe PLAGNIOL-VILLARD
• sysfs crashes while recursively checking file permissions   Chintan Pandya
• [PATCH v7 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v8 0/2] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v8 1/2] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v8 2/2] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v8 0/3] ARM: Exynos/S3C64XX: usb phy driver support for S3C64XX and EXYNOS4210   Praveen Paneri
• [PATCH v8 1/3] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH v8 2/3] ARM: S3C64XX: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v8 3/3] ARM: EXYNOS: Enabling samsung-usbphy driver for EXYNOS4210   Praveen Paneri
• [PATCH v8 2/2] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v8 1/2] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v8 1/3] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH v8 3/3] ARM: EXYNOS: Enabling samsung-usbphy driver for EXYNOS4210   Praveen Paneri
• [PATCH v8 2/3] ARM: S3C64XX: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v9 1/2] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v9 0/3] ARM: Exynos/S3C64XX: usb phy driver support for S3C64XX and EXYNOS4210   Praveen Paneri
• [PATCH v9 1/3] ARM: S3C64XX: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v9 2/3] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH v9 3/3] ARM: EXYNOS: Enabling samsung-usbphy driver for EXYNOS4210   Praveen Paneri
• [PATCH v8 2/2] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH] ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore   Dimitris Papastamos
• [PATCH] ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore   Dimitris Papastamos
• [PATCH] ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore   Dimitris Papastamos
• [PATCH v2] ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore   Dimitris Papastamos
• high resolution EhrPWM with Ubuntu Linux on BeagleBone   Sameer Parekh
• [PATCH 1/5] ARM: EXYNOS: fix the hotplug for Cortex-A15   Kyungmin Park
• [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Kyungmin Park
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Kyungmin Park
• [PATCH] ARM: Exynos: Remove unused non-dt support for dwmci controller   Kyungmin Park
• [PATCH] ARM: dts: add initial dts file for ORIGEN4QUAD   Kyungmin Park
• [PATCH 1/2] i2c-s3c2410: Leave the bus disabled unless it is in use   Kyungmin Park
• [GIT PULL][for 3.8] pull request from upload/board in arch-pxa git tree   Paul Parsons
• Configure the USB device/host on sam9g25 module   Martin Peevski
• Configure the USB device/host on sam9g25 module   Martin Peevski
• Configure the USB device/host on sam9g25 module   Martin Peevski
• [PATCH 022/493] ARM: remove CONFIG_HOTPLUG ifdefs   Bill Pemberton
• [PATCH 032/493] arm: remove use of __devexit_p   Bill Pemberton
• [PATCH 046/493] hwrng: remove use of __devexit_p   Bill Pemberton
• [PATCH 050/493] clk: remove use of __devexit_p   Bill Pemberton
• [PATCH 053/493] crypto: remove use of __devexit_p   Bill Pemberton
• [PATCH 055/493] dma: remove use of __devexit_p   Bill Pemberton
• [PATCH 064/493] hwspinlock: remove use of __devexit_p   Bill Pemberton
• [PATCH 065/493] i2c: remove use of __devexit_p   Bill Pemberton
• [PATCH 075/493] mfd: remove use of __devexit_p   Bill Pemberton
• [PATCH 077/493] mmc: remove use of __devexit_p   Bill Pemberton
• [PATCH 097/493] scsi: remove use of __devexit_p   Bill Pemberton
• [PATCH 119/493] usb: remove use of __devexit_p   Bill Pemberton
• [PATCH 121/493] video: remove use of __devexit_p   Bill Pemberton
• [PATCH 123/493] watchdog: remove use of __devexit_p   Bill Pemberton
• [PATCH 128/493] sound: remove use of __devexit_p   Bill Pemberton
• [PATCH 132/493] Input: remove use of __devexit_p   Bill Pemberton
• [PATCH 133/493] remove use of __devexit_p   Bill Pemberton
• [PATCH 135/493] mtd: remove use of __devexit_p   Bill Pemberton
• [PATCH 136/493] ethernet: remove use of __devexit_p   Bill Pemberton
• [PATCH 138/493] pinctrl: remove use of __devexit_p   Bill Pemberton
• [PATCH 140/493] rtc: remove use of __devexit_p   Bill Pemberton
• [PATCH 141/493] spi: remove use of __devexit_p   Bill Pemberton
• [PATCH 145/493] tty: serial: remove use of __devexit_p   Bill Pemberton
• [PATCH 146/493] ASoC: remove use of __devexit_p   Bill Pemberton
• [PATCH 150/493] rtc: remove use of __devinit   Bill Pemberton
• [PATCH 152/493] watchdog: remove use of __devinit   Bill Pemberton
• [PATCH 158/493] video: remove use of __devinit   Bill Pemberton
• [PATCH 159/493] usb: remove use of __devinit   Bill Pemberton
• [PATCH 161/493] tty: remove use of __devinit   Bill Pemberton
• [PATCH 190/493] spi: remove use of __devinit   Bill Pemberton
• [PATCH 192/493] scsi: remove use of __devinit   Bill Pemberton
• [PATCH 195/493] pinctl: remove use of __devinit   Bill Pemberton
• [PATCH 198/493] ethernet: remove use of __devinit   Bill Pemberton
• [PATCH 207/493] i2c: remove use of __devinit   Bill Pemberton
• [PATCH 223/493] clk: remove use of __devinit   Bill Pemberton
• [PATCH 225/493] crypto: remove use of __devinit   Bill Pemberton
• [PATCH 226/493] dma: remove use of __devinit   Bill Pemberton
• [PATCH 230/493] input: remove use of __devinit   Bill Pemberton
• [PATCH 234/493] media: remove use of __devinit   Bill Pemberton
• [PATCH 235/493] mfd: remove use of __devinit   Bill Pemberton
• [PATCH 237/493] mmc: remove use of __devinit   Bill Pemberton
• [PATCH 238/493] mtd: remove use of __devinit   Bill Pemberton
• [PATCH 243/493] pcmcia: remove use of __devinit   Bill Pemberton
• [PATCH 253/493] hwspinlock: remove use of __devinit   Bill Pemberton
• [PATCH 261/493] sound: remove use of __devinit   Bill Pemberton
• [PATCH 270/493] arm: remove use of __devinit   Bill Pemberton
• [PATCH 284/493] arm64: remove use of __devinit   Bill Pemberton
• [PATCH 298/493] video: remove use of __devinitdata   Bill Pemberton
• [PATCH 312/493] mfd: remove use of __devinitdata   Bill Pemberton
• [PATCH 318/493] pinctrl: remove use of __devinitdata   Bill Pemberton
• [PATCH 331/493] ethernet: remove use of __devinitdata   Bill Pemberton
• [PATCH 340/493] arm: remove use of __devinitdata   Bill Pemberton
• [PATCH 357/493] i2c: remove use of __devinitconst   Bill Pemberton
• [PATCH 360/493] mfd: remove use of __devinitconst   Bill Pemberton
• [PATCH 364/493] pinctrl: remove use of __devinitconst   Bill Pemberton
• [PATCH 394/493] clk: remove use of __devexit   Bill Pemberton
• [PATCH 397/493] crypto: remove use of __devexit   Bill Pemberton
• [PATCH 398/493] dma: remove use of __devexit   Bill Pemberton
• [PATCH 403/493] hwspinlock: remove use of __devexit   Bill Pemberton
• [PATCH 404/493] i2c: remove use of __devexit   Bill Pemberton
• [PATCH 408/493] input: remove use of __devexit   Bill Pemberton
• [PATCH 412/493] mfd: remove use of __devexit   Bill Pemberton
• [PATCH 414/493] mmc: remove use of __devexit   Bill Pemberton
• [PATCH 415/493] mtd: remove use of __devexit   Bill Pemberton
• [PATCH 417/493] pinctrl: remove use of __devexit   Bill Pemberton
• [PATCH 422/493] rtc: remove use of __devexit   Bill Pemberton
• [PATCH 425/493] scsi: remove use of __devexit   Bill Pemberton
• [PATCH 427/493] spi: remove use of __devexit   Bill Pemberton
• [PATCH 429/493] tty: remove use of __devexit   Bill Pemberton
• [PATCH 431/493] usb: remove use of __devexit   Bill Pemberton
• [PATCH 435/493] watchdog: remove use of __devexit   Bill Pemberton
• [PATCH 437/493] char: remove use of __devexit   Bill Pemberton
• [PATCH 444/493] media: remove use of __devexit   Bill Pemberton
• [PATCH 446/493] video: remove use of __devexit   Bill Pemberton
• [PATCH 470/493] ethernet: remove use of __devexit   Bill Pemberton
• [PATCH 484/493] arm: remove use of __devexit   Bill Pemberton
• [PATCH 491/493] sound: remove use of __devexit   Bill Pemberton
• [PATCH 022/493] ARM: remove CONFIG_HOTPLUG ifdefs   Bill Pemberton
• [PATCH 065/493] i2c: remove use of __devexit_p   Bill Pemberton
• [PATCH] wanrouter: Remove it and the drivers that depend on it   Joe Perches
• [PATCH v6 2/7] net: mvneta: driver for Marvell Armada 370/XP network unit   Joe Perches
• [PATCH v6 2/7] net: mvneta: driver for Marvell Armada 370/XP network unit   Joe Perches
• [PATCH V2] wanrouter: Remove it and the drivers that depend on it   Joe Perches
• [PATCH V2] wanrouter: Remove it and the drivers that depend on it   Joe Perches
• [PATCH 1/1 v2] net: add micrel KSZ8873MLL switch support   Joe Perches
• [PATCH] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Thomas Petazzoni
• [PATCH v2] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Thomas Petazzoni
• [PATCH v4] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [4/4] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH v3 2/4] arm: bcm2835: convert to the irqchip infrastructure   Thomas Petazzoni
• [PATCH 1/2] arm: bcm2835: move to the multiplatform support   Thomas Petazzoni
• [PATCH v5] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH 1/7] net: mvmdio: new Marvell MDIO driver   Thomas Petazzoni
• [PATCH 2/7] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH 3/7] net: mvneta: update MAINTAINERS file for the mvneta maintainers   Thomas Petazzoni
• [PATCH 4/7] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Thomas Petazzoni
• [PATCH 5/7] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH 6/7] arm: mvebu: enable Ethernet controllers on OpenBlocks AX3-4 platform   Thomas Petazzoni
• [PATCH 7/7] arm: mvebu: enable Ethernet controllers on Mirabox platform   Thomas Petazzoni
• arm: mvebu: Pull request for 'marvell-boards' branch   Thomas Petazzoni
• [PATCH 1/6] arm: mvebu: fix compatible string in armada-370-xp.dtsi   Thomas Petazzoni
• [PATCH 2/6] arm: mvebu: don't list all boards in dt compat field for Armada 370/XP   Thomas Petazzoni
• [PATCH 3/6] arm: mvebu: fix typo in machine name for Armada 370/XP   Thomas Petazzoni
• [PATCH 4/6] arm: mvebu: support for the PlatHome OpenBlocks AX3-4 board   Thomas Petazzoni
• [PATCH 5/6] arm: mvebu: support for the Globalscale Mirabox board   Thomas Petazzoni
• [PATCH 6/6] arm: mvebu: add LED support in defconfig   Thomas Petazzoni
• [4/4] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH v4] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH v4] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH v6] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH v6 1/7] net: mvmdio: new Marvell MDIO driver   Thomas Petazzoni
• [PATCH v6 2/7] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH v6 3/7] net: mvneta: update MAINTAINERS file for the mvneta maintainers   Thomas Petazzoni
• [PATCH v6 4/7] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Thomas Petazzoni
• [PATCH v6 5/7] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH v6 6/7] arm: mvebu: enable Ethernet controllers on OpenBlocks AX3-4 platform   Thomas Petazzoni
• [PATCH v6 7/7] arm: mvebu: enable Ethernet controllers on Mirabox platform   Thomas Petazzoni
• [PATCH v6 2/7] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH v6 2/7] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH v7] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH v7 1/6] net: mvmdio: new Marvell MDIO driver   Thomas Petazzoni
• [PATCH v7 2/6] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH v7 3/6] net: mvneta: update MAINTAINERS file for the mvneta maintainers   Thomas Petazzoni
• [PATCH v7 4/6] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Thomas Petazzoni
• [PATCH v7 5/6] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH v7 6/6] arm: mvebu: enable Ethernet controllers on OpenBlocks AX3-4 platform   Thomas Petazzoni
• [GIT PULL] Marvell cleanup changes for the v3.8 merge window   Thomas Petazzoni
• [PATCH 1/3] arm: mvebu: fix compatible string in armada-370-xp.dtsi   Thomas Petazzoni
• [PATCH 2/3] arm: mvebu: don't list all boards in dt compat field for Armada 370/XP   Thomas Petazzoni
• [PATCH 3/3] arm: mvebu: fix typo in machine name for Armada 370/XP   Thomas Petazzoni
• [GIT PULL] Marvell board changes for the v3.8 merge window   Thomas Petazzoni
• [PATCH 1/2] arm: mvebu: support for the PlatHome OpenBlocks AX3-4 board   Thomas Petazzoni
• [PATCH 2/2] arm: mvebu: support for the Globalscale Mirabox board   Thomas Petazzoni
• [GIT PULL] Marvell defconfig changes for v3.8 merge window   Thomas Petazzoni
• [PATCH] arm: mvebu: add LED support in defconfig   Thomas Petazzoni
• [PATCH v7] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH 1/4] pinctrl: dove: Prevent NULL dereference if of_match_device returns NULL   Thomas Petazzoni
• [PATCH v7] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Thomas Petazzoni
• [PATCH 1/4] pinctrl: dove: Prevent NULL dereference if of_match_device returns NULL   Thomas Petazzoni
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Thomas Petazzoni
• [PATCH] Device Tree binding for the 'mv_xor' XOR engine DMA driver   Thomas Petazzoni
• [PATCH 01/29] mv_xor: use dev_(err|info|notice) instead of dev_printk   Thomas Petazzoni
• [PATCH 02/29] mv_xor: do not use pool_size from platform_data within the driver   Thomas Petazzoni
• [PATCH 03/29] mv_xor: split initialization/cleanup of XOR channels   Thomas Petazzoni
• [PATCH 04/29] mv_xor: allow channels to be registered directly from the main device   Thomas Petazzoni
• [PATCH 05/29] arm: plat-orion: convert the registration of the xor0 engine to the single driver   Thomas Petazzoni
• [PATCH 06/29] arm: plat-orion: convert the registration of the xor1 engine to the single driver   Thomas Petazzoni
• [PATCH 07/29] arm: plat-orion: remove unused orion_xor_init_channels()   Thomas Petazzoni
• [PATCH 08/29] mv_xor: remove sub-driver 'mv_xor'   Thomas Petazzoni
• [PATCH 09/29] mv_xor: remove 'shared' from mv_xor_platform_data   Thomas Petazzoni
• [PATCH 10/29] mv_xor: rename mv_xor_platform_data to mv_xor_channel_data   Thomas Petazzoni
• [PATCH 11/29] mv_xor: rename mv_xor_shared_platform_data to mv_xor_platform_data   Thomas Petazzoni
• [PATCH 12/29] mv_xor: change the driver name to 'mv_xor'   Thomas Petazzoni
• [PATCH 13/29] mv_xor: rename many symbols to remove the 'shared' word   Thomas Petazzoni
• [PATCH 14/29] mv_xor: remove unused id field in mv_xor_device structure   Thomas Petazzoni
• [PATCH 15/29] mv_xor: remove unused to_mv_xor_device() macro   Thomas Petazzoni
• [PATCH 16/29] mv_xor: simplify dma_sync_single_for_cpu() calls   Thomas Petazzoni
• [PATCH 17/29] mv_xor: introduce a mv_chan_to_devp() helper   Thomas Petazzoni
• [PATCH 18/29] mv_xor: get rid of the pdev pointer in mv_xor_device   Thomas Petazzoni
• [PATCH 19/29] mv_xor: in mv_xor_chan, rename 'common' to 'dmachan'   Thomas Petazzoni
• [PATCH 20/29] mv_xor: in mv_xor_device, rename 'common' to 'dmadev'   Thomas Petazzoni
• [PATCH 21/29] mv_xor: use mv_xor_chan pointers as arguments to self-test functions   Thomas Petazzoni
• [PATCH 22/29] mv_xor: merge mv_xor_device and mv_xor_chan   Thomas Petazzoni
• [PATCH 23/29] mv_xor: rename mv_xor_private to mv_xor_device   Thomas Petazzoni
• [PATCH 24/29] mv_xor: remove useless backpointer from mv_xor_chan to mv_xor_device   Thomas Petazzoni
• [PATCH 25/29] mv_xor: remove hw_id field from platform_data   Thomas Petazzoni
• [PATCH 26/29] mv_xor: remove the pool_size from platform_data   Thomas Petazzoni
• [PATCH 27/29] mv_xor: add missing free_irq() call   Thomas Petazzoni
• [PATCH 28/29] mv_xor: add Device Tree binding   Thomas Petazzoni
• [PATCH 29/29] arm: mvebu: add XOR engines to Armada 370/XP .dtsi   Thomas Petazzoni
• [PATCH 2/4] pinctrl: kirkwood: Prevent NULL dereference if of_match_device returns NULL   Thomas Petazzoni
• [PATCH 2/7] clk: mvebu: add armada-370-xp CPU specific clocks   Thomas Petazzoni
• [PATCH 3/7] clk: armada-370-xp: add support for clock framework   Thomas Petazzoni
• [PATCH 4/7] clocksource: time-armada-370-xp converted to clk framework   Thomas Petazzoni
• [PATCH 6/7] ARM: dove: switch to DT clock providers   Thomas Petazzoni
• [PATCH 0/7] core, cpu and gated clocks for mvebu   Thomas Petazzoni
• [GIT PULL] Marvell driver changes for v3.8 merge window   Thomas Petazzoni
• [PATCH 1/3] net: mvmdio: new Marvell MDIO driver   Thomas Petazzoni
• [PATCH 2/3] net: mvneta: driver for Marvell Armada 370/XP network unit   Thomas Petazzoni
• [PATCH 3/3] net: mvneta: update MAINTAINERS file for the mvneta maintainers   Thomas Petazzoni
• [GIT PULL] Marvell board changes for 3.8, network related   Thomas Petazzoni
• [PATCH 1/4] arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP   Thomas Petazzoni
• [PATCH 2/4] arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards   Thomas Petazzoni
• [PATCH 3/4] arm: mvebu: enable Ethernet controllers on OpenBlocks AX3-4 platform   Thomas Petazzoni
• [PATCH 4/4] arm: mvebu: enable Ethernet controllers on Mirabox platform   Thomas Petazzoni
• [PATCH 2/6] irqchip: sunxi: Add irq controller driver   Thomas Petazzoni
• [PATCH 4/6] ARM: sunxi: Add earlyprintk support   Thomas Petazzoni
• [PATCH 0/6] Add basic support for Allwinner A1X SoCs   Thomas Petazzoni
• [PATCH 1/6] clocksource: sunxi: Add Allwinner A1X Timer Driver   Thomas Petazzoni
• [PATCH 1/6] clocksource: sunxi: Add Allwinner A1X Timer Driver   Thomas Petazzoni
• [GIT PULL] arm: orion5x: begin the DT conversion   Thomas Petazzoni
• [PATCH 1/4] arm: orion5x: mechanical defconfig update   Thomas Petazzoni
• [PATCH 2/4] arm: orion5x: basic Device Tree support   Thomas Petazzoni
• [PATCH 3/4] arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree   Thomas Petazzoni
• [PATCH 4/4] arm: orion5x: add DT related options in defconfig   Thomas Petazzoni
• [PATCH] Device Tree binding for the 'mv_xor' XOR engine DMA driver   Thomas Petazzoni
• Final call for 3.8 arm-soc patches   Thomas Petazzoni
• [PATCH v2 1/2] DMA: mv_xor: Add a device_control function   Thomas Petazzoni
• [PATCH v2 2/2] ARM: Kirkwood: Convert XOR instantiation to DT.   Thomas Petazzoni
• [PATCH 1/4] pinctrl: mvebu: fix iomem pointer for dove pinctrl   Thomas Petazzoni
• [GIT PULL] Marvell XOR driver cleanup and DT binding   Thomas Petazzoni
• [PATCH 01/30] dma: mv_xor: use dev_(err|info|notice) instead of dev_printk   Thomas Petazzoni
• [PATCH 02/30] dma: mv_xor: do not use pool_size from platform_data within the driver   Thomas Petazzoni
• [PATCH 03/30] dma: mv_xor: split initialization/cleanup of XOR channels   Thomas Petazzoni
• [PATCH 04/30] dma: mv_xor: allow channels to be registered directly from the main device   Thomas Petazzoni
• [PATCH 05/30] arm: plat-orion: convert the registration of the xor0 engine to the single driver   Thomas Petazzoni
• [PATCH 06/30] arm: plat-orion: convert the registration of the xor1 engine to the single driver   Thomas Petazzoni
• [PATCH 07/30] arm: plat-orion: remove unused orion_xor_init_channels()   Thomas Petazzoni
• [PATCH 08/30] dma: mv_xor: remove sub-driver 'mv_xor'   Thomas Petazzoni
• [PATCH 09/30] dma: mv_xor: remove 'shared' from mv_xor_platform_data   Thomas Petazzoni
• [PATCH 10/30] dma: mv_xor: rename mv_xor_platform_data to mv_xor_channel_data   Thomas Petazzoni
• [PATCH 11/30] dma: mv_xor: rename mv_xor_shared_platform_data to mv_xor_platform_data   Thomas Petazzoni
• [PATCH 12/30] dma: mv_xor: change the driver name to 'mv_xor'   Thomas Petazzoni
• [PATCH 13/30] dma: mv_xor: rename many symbols to remove the 'shared' word   Thomas Petazzoni
• [PATCH 14/30] dma: mv_xor: remove unused id field in mv_xor_device structure   Thomas Petazzoni
• [PATCH 15/30] dma: mv_xor: remove unused to_mv_xor_device() macro   Thomas Petazzoni
• [PATCH 16/30] dma: mv_xor: simplify dma_sync_single_for_cpu() calls   Thomas Petazzoni
• [PATCH 17/30] dma: mv_xor: introduce a mv_chan_to_devp() helper   Thomas Petazzoni
• [PATCH 18/30] dma: mv_xor: get rid of the pdev pointer in mv_xor_device   Thomas Petazzoni
• [PATCH 19/30] dma: mv_xor: in mv_xor_chan, rename 'common' to 'dmachan'   Thomas Petazzoni
• [PATCH 20/30] dma: mv_xor: in mv_xor_device, rename 'common' to 'dmadev'   Thomas Petazzoni
• [PATCH 21/30] dma: mv_xor: use mv_xor_chan pointers as arguments to self-test functions   Thomas Petazzoni
• [PATCH 22/30] dma: mv_xor: merge mv_xor_device and mv_xor_chan   Thomas Petazzoni
• [PATCH 23/30] dma: mv_xor: rename mv_xor_private to mv_xor_device   Thomas Petazzoni
• [PATCH 24/30] dma: mv_xor: remove useless backpointer from mv_xor_chan to mv_xor_device   Thomas Petazzoni
• [PATCH 25/30] dma: mv_xor: remove hw_id field from platform_data   Thomas Petazzoni
• [PATCH 26/30] dma: mv_xor: remove the pool_size from platform_data   Thomas Petazzoni
• [PATCH 27/30] dma: mv_xor: add missing free_irq() call   Thomas Petazzoni
• [PATCH 28/30] dma: mv_xor: add Device Tree binding   Thomas Petazzoni
• [PATCH 29/30] dma: mv_xor: add missing __devinit and __devexit qualifiers on probe and remove   Thomas Petazzoni
• [PATCH 30/30] dma: mv_xor: Add a device_control function   Thomas Petazzoni
• [GIT PULL] Marvell XOR driver DT changes   Thomas Petazzoni
• [PATCH 1/3] arm: mvebu: add XOR engines to Armada 370/XP .dtsi   Thomas Petazzoni
• [PATCH 2/3] arm: kirkwood: Convert XOR instantiation to DT.   Thomas Petazzoni
• [PATCH 3/3] arm: dove: Convert Dove to DT XOR DMA engine   Thomas Petazzoni
• [GIT PULL] Marvell mvneta Ethernet/MDIO drivers checkpatch fixes   Thomas Petazzoni
• [PATCH 1/3] net: mvmdio: use <linux/delay.h> instead of <asm/delay.h>   Thomas Petazzoni
• [PATCH 2/3] net: mvmdio: adjust multiline comment to net/ style   Thomas Petazzoni
• [PATCH 3/3] net: mvneta: adjust multiline comments to net/ style   Thomas Petazzoni
• [GIT PULL] Marvell mvebu defconfig updates for net and XOR   Thomas Petazzoni
• [PATCH 1/2] arm: mvebu: update defconfig to include network driver   Thomas Petazzoni
• [PATCH 2/2] arm: mvebu: update defconfig to include XOR driver   Thomas Petazzoni
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   Thomas Petazzoni
• [PATCH 3/3] net: mvneta: adjust multiline comments to net/ style   Thomas Petazzoni
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   Thomas Petazzoni
• [GIT PULL] Marvell Ethernet driver clk support + section mismatch fix   Thomas Petazzoni
• [PATCH 1/2] net: mvneta: add clk support   Thomas Petazzoni
• [PATCH 2/2] net: mvneta: fix section mismatch warning caused by mvneta_deinit()   Thomas Petazzoni
• [PATCH 0/1] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Thomas Petazzoni
• [GIT PULL] Marvell DT updates for clk support in mvneta driver   Thomas Petazzoni
• [PATCH 1/2] arm: mvebu: add 'clocks' property to Ethernet nodes for Armada 370/XP SoCs   Thomas Petazzoni
• [PATCH 2/2] arm: mvebu: remove 'clock-frequency' properties from Armada 370/XP Ethernet nodes   Thomas Petazzoni
• [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT   Thomas Petazzoni
• [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT   Thomas Petazzoni
• [PATCH] arm: orion5x: convert Netgear WNR854T to device tree   Thomas Petazzoni
• arm: mvebu: Various mvebu clock fixes/improvements   Thomas Petazzoni
• [PATCH 1/7] clk: mvebu: init all mvebu clock types from mvebu_clocks_init()   Thomas Petazzoni
• [PATCH 2/7] clk: mvebu: move clk-cpu compatible strings into the clk-cpu driver   Thomas Petazzoni
• [PATCH 3/7] clk: mvebu: rename mvebu_clk_gating_init() to mvebu_gating_clk_init()   Thomas Petazzoni
• [PATCH 4/7] arm: mvebu: move DT cpu clock nodes to the Armada XP specific .dtsi   Thomas Petazzoni
• [PATCH 5/7] clk: mvebu: rename *-core-clocks to *-core-clock   Thomas Petazzoni
• [PATCH 6/7] clk: mvebu: rename armada-xp-cpu-clockctrl to armada-xp-cpu-clock   Thomas Petazzoni
• [PATCH 7/7] arm: mvebu: fix SATA clocks on Armada 370/XP   Thomas Petazzoni
• [PATCH] ARM: Kconfig: Do not select ARCH_VEXPRESS on ARCH_MULTI_V7   Thomas Petazzoni
• [PATCH] ARM: Kconfig: Do not select ARCH_VEXPRESS on ARCH_MULTI_V7   Thomas Petazzoni
• [PATCH 1/7] clk: mvebu: init all mvebu clock types from mvebu_clocks_init()   Thomas Petazzoni
• arm: mvebu: Various mvebu clock fixes/improvements   Thomas Petazzoni
• [PATCH 4/7] arm: mvebu: move DT cpu clock nodes to the Armada XP specific .dtsi   Thomas Petazzoni
• [PATCH V2 2/2] ARM: tegra: move timer.c to drivers/clocksource/   Thomas Petazzoni
• arm: mvebu: Various mvebu clock fixes/improvements   Thomas Petazzoni
• arm: mvebu: Various mvebu clock fixes/improvements   Thomas Petazzoni
• arm: mvebu: Various mvebu clock fixes/improvements   Thomas Petazzoni
• [GIT PULL v3] core, cpu and gated clocks for mvebu   Thomas Petazzoni
• [PATCH 1/8] clk: mvebu: add mvebu core clocks.   Thomas Petazzoni
• [PATCH 2/8] clk: mvebu: add armada-370-xp CPU specific clocks   Thomas Petazzoni
• [PATCH 3/8] clk: mvebu: add clock gating control provider for DT   Thomas Petazzoni
• [PATCH 4/8] clk: mvebu: armada 370/XP add clock gating control provider for DT   Thomas Petazzoni
• [PATCH 5/8] clk: armada-370-xp: add support for clock framework   Thomas Petazzoni
• [PATCH 6/8] clocksource: convert time-armada-370-xp to clk framework   Thomas Petazzoni
• [PATCH 7/8] ARM: dove: switch to DT clock providers   Thomas Petazzoni
• [PATCH 8/8] ARM: Kirkwood: switch to DT clock providers   Thomas Petazzoni
• [GIT PULL v3] Adding SATA support for Armada 370/XP   Thomas Petazzoni
• [PATCH 1/4] arm: mvebu: increase atomic coherent pool size for armada 370/XP   Thomas Petazzoni
• [PATCH 2/4] arm: mvebu: SATA support: SoC-level DT data for Armada 370/XP   Thomas Petazzoni
• [PATCH 3/4] arm: mvebu: SATA support: mvebu_defconfig update   Thomas Petazzoni
• [PATCH 4/4] arm: mvebu: SATA support: board-level DT data for Armada 370/XP boards   Thomas Petazzoni
• [GIT PULL v2] Marvell XOR driver DT changes   Thomas Petazzoni
• [PATCH 1/4] arm: kirkwood: Convert XOR instantiation to DT.   Thomas Petazzoni
• [PATCH 2/4] arm: dove: Convert Dove to DT XOR DMA engine   Thomas Petazzoni
• [PATCH 3/4] arm: mvebu: add XOR engines to Armada 370 .dtsi   Thomas Petazzoni
• [PATCH 4/4] arm: mvebu: add XOR engines to Armada XP .dtsi   Thomas Petazzoni
• arm: mvebu: Various mvebu clock fixes/improvements   Thomas Petazzoni
• [PATCH V4 5/5] arm: mvebu: Added SMP support for Armada XP   Thomas Petazzoni
• [PATCH V3 1/2] clocksource: add common of_clksrc_init() function   Thomas Petazzoni
• [PATCH v4] Introduce irqchip infrastructure   Thomas Petazzoni
• [PATCH 01/16] irqchip: add basic infrastructure   Thomas Petazzoni
• [PATCH 02/16] arm: add set_handle_irq() to register the parent IRQ controller handler function   Thomas Petazzoni
• [PATCH 03/16] arm: bcm2835: convert to the irqchip infrastructure   Thomas Petazzoni
• [PATCH 04/16] arm: mvebu: move irq controller driver to drivers/irqchip   Thomas Petazzoni
• [PATCH 05/16] irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS   Thomas Petazzoni
• [PATCH 06/16] ARM: gic: move register definitions into .c file   Thomas Petazzoni
• [PATCH 07/16] ARM: gic: remove direct use of gic_raise_softirq   Thomas Petazzoni
• [PATCH 08/16] irqchip: Move ARM GIC to drivers/irqchip   Thomas Petazzoni
• [PATCH 09/16] irqchip: Move ARM VIC to drivers/irqchip   Thomas Petazzoni
• [PATCH 10/16] ARM: highbank: use common irqchip_init   Thomas Petazzoni
• [PATCH 11/16] ARM: picoxcell: use common irqchip_init   Thomas Petazzoni
• [PATCH 12/16] ARM: spear3xx: use common irqchip_init   Thomas Petazzoni
• [PATCH 13/16] ARM: spear6xx: use common irqchip_init   Thomas Petazzoni
• [PATCH 14/16] arm: vic: don't expose vic_of_init() anymore   Thomas Petazzoni
• [PATCH 15/16] irqchip: vic: mark vic_of_init() as static   Thomas Petazzoni
• [PATCH 16/16] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Thomas Petazzoni
• [PATCH 01/16] irqchip: add basic infrastructure   Thomas Petazzoni
• [PATCH v4] Introduce irqchip infrastructure   Thomas Petazzoni
• [PATCH V4 1/3] of: introduce for_each_matching_node_and_match()   Thomas Petazzoni
• [GIT PULL] Marvell Ethernet driver clk support + section mismatch fix   Thomas Petazzoni
• [PATCH 16/16] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Thomas Petazzoni
• [PATCH 15/16] irqchip: vic: mark vic_of_init() as static   Thomas Petazzoni
• [PATCH 15/16] irqchip: vic: mark vic_of_init() as static   Thomas Petazzoni
• [PATCH 0/4] Dove pinctrl fixes and DT enabling   Thomas Petazzoni
• [PATCH] ARM: Kirkwood: Update PCI-E fixup   Thomas Petazzoni
• [PATCH 15/16] irqchip: vic: mark vic_of_init() as static   Thomas Petazzoni
• [GIT PULL v3] core, cpu and gated clocks for mvebu   Thomas Petazzoni
• [GIT PULL] Marvell OpenBlocks AX3-4: enable SATA and I2C   Thomas Petazzoni
• [PATCH 1/5] ARM: mvebu: Add support for I2C controllers in Armada 370/XP   Thomas Petazzoni
• [PATCH 2/5] ARM: mvebu: Add support for I2C on OpenBlocks AX3-4   Thomas Petazzoni
• [PATCH 3/5] ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4   Thomas Petazzoni
• [PATCH 4/5] ARM: mvebu: Add SATA support for OpenBlocks AX3-4   Thomas Petazzoni
• [PATCH 5/5] ARM: mvebu: update defconfig with I2C and RTC support   Thomas Petazzoni
• [GIT PULL] Marvell: late fixes for 3.8   Thomas Petazzoni
• [PATCH 1/5] arm: mvebu: fix address decoding armada_cfg_base() function   Thomas Petazzoni
• [PATCH 2/5] dma: mv_xor: clear the window override control registers   Thomas Petazzoni
• [PATCH 3/5] dma: mv_xor: use request_irq() instead of devm_request_irq()   Thomas Petazzoni
• [PATCH 4/5] dma: mv_xor: fix error checking of irq_of_parse_and_map()   Thomas Petazzoni
• [PATCH 5/5] dma: mv_xor: fix error handling path   Thomas Petazzoni
• [PATCH 3/4] ARM: Dove: Convert to DT GPIO and pinctrl   Thomas Petazzoni
• [PATCH 3/4] ARM: Dove: Convert to DT GPIO and pinctrl   Thomas Petazzoni
• [PATCH 2/4] ds1374: add support of device tree   Thomas Petazzoni
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Thomas Petazzoni
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Thomas Petazzoni
• [PATCH 3/4] imx27-dt: configure i2c1 gpio on armadeus apf27   Thomas Petazzoni
• [GIT PULL 5/5] ARM: mvebu: changes for v3.8   Thomas Petazzoni
• [PATCH 4/6 v5] arm highbank: add support for pl320 IPC   Thomas Petazzoni
• [PATCH 1/1] ARM: kirkwood: Add support for the MPL CEC4   Stefan Peter
• [PATCH 1/1] ARM: kirkwood: Add support for the MPL CEC4   Stefan Peter
• [PATCH 1/1] ARM: kirkwood: Add support for the MPL CEC4   Stefan Peter
• [PATCH 0/1 V2] ARM: kirkwood: Add support for the MPL CEC4   Stefan Peter
• [PATCH 1/1 V2] ARM: kirkwood: Add support for the MPL CEC4   Stefan Peter
• [PATCH 0/1] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Stefan Peter
• [PATCH 1/1] ARM: kirkwood: Convert mplcec4 board to pinctrl   Stefan Peter
• [PATCH 0/1] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Stefan Peter
• [PATCH 0/1] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Stefan Peter
• [PATCH 0/1] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Stefan Peter
• [PATCH 0/1 V2] ARM: kirkwood: Convert the mplcec4 board to pinctrl   Stefan Peter
• [PATCH 1/1 V2] ARM: kirkwood: Convert mplcec4 board to pinctrl   Stefan Peter
• [PATCH v3 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents   Stefan Peter
• [PATCH 0/8] Support for AM33xx PWM Susbsytem   Philip, Avinash
• [PATCH 1/8] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Philip, Avinash
• [PATCH 2/8] ARM: am33xx: clk: Add optional clock for EHRPWM   Philip, Avinash
• [PATCH 3/8] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Philip, Avinash
• [PATCH 4/8] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Philip, Avinash
• [PATCH 5/8] pwm: pwm-tiehrpwm: Add device-tree binding support for EHRPWM driver   Philip, Avinash
• [PATCH 6/8] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Philip, Avinash
• [PATCH 7/8] ARM: dts: AM33XX: Add PWMSS device tree nodes   Philip, Avinash
• [PATCH 8/8] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm   Philip, Avinash
• [PATCH v3 2/4] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs   Philip, Avinash
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH v3] ARM: dts: AM33xx: Add SPI node   Philip, Avinash
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH 1/8] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Philip, Avinash
• [PATCH 5/8] pwm: pwm-tiehrpwm: Add device-tree binding support for EHRPWM driver   Philip, Avinash
• [PATCH 6/8] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Philip, Avinash
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH v2 00/10] Support for AM33xx PWM Susbsytem   Philip, Avinash
• [PATCH v2 01/10] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Philip, Avinash
• [PATCH v2 02/10] ARM: am33xx: clk: Add optional clock for EHRPWM   Philip, Avinash
• [PATCH v2 03/10] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Philip, Avinash
• [PATCH v2 04/10] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Philip, Avinash
• [PATCH v2 05/10] pwm: pwm-tiecap: pinctrl support   Philip, Avinash
• [PATCH v2 06/10] pwm: pwm-tiehrpwm: Add device-tree binding support for EHRPWM driver   Philip, Avinash
• [PATCH v2 07/10] pwm: pwm-tiehrpwm: pinctrl support   Philip, Avinash
• [PATCH v2 08/10] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Philip, Avinash
• [PATCH v2 09/10] ARM: dts: AM33XX: Add PWMSS device tree nodes   Philip, Avinash
• [PATCH v2 10/10] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm   Philip, Avinash
• [PATCH v2 01/10] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Philip, Avinash
• [PATCH v2 04/10] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Philip, Avinash
• [PATCH v2 08/10] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Philip, Avinash
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH v2] pwm: Device tree support for PWM polarity.   Philip, Avinash
• [PATCH v3 00/10] Support for AM33xx PWM Subsystem   Philip, Avinash
• [PATCH v3 01/10] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Philip, Avinash
• [PATCH v3 02/10] ARM: am33xx: clk: Add optional clock for EHRPWM   Philip, Avinash
• [PATCH v3 03/10] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Philip, Avinash
• [PATCH v3 04/10] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Philip, Avinash
• [PATCH v3 05/10] pwm: pwm-tiecap: pinctrl support   Philip, Avinash
• [PATCH v3 06/10] pwm: pwm-tiehrpwm: Add device-tree binding support for EHRPWM driver   Philip, Avinash
• [PATCH v3 07/10] pwm: pwm-tiehrpwm: pinctrl support   Philip, Avinash
• [PATCH v3 08/10] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Philip, Avinash
• [PATCH v3 09/10] ARM: dts: AM33XX: Add PWMSS device tree nodes   Philip, Avinash
• [PATCH v3 10/10] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm   Philip, Avinash
• [PATCH v4 3/3] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH v2] pwm: Device tree support for PWM polarity.   Philip, Avinash
• [PATCH v3] pwm: Device tree support for PWM polarity.   Philip, Avinash
• [PATCH v4 00/11] Support for AM33xx PWM Subsystem   Philip, Avinash
• [PATCH v4 01/11] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Philip, Avinash
• [PATCH v4 02/11] ARM: am33xx: clk: Add optional clock for EHRPWM   Philip, Avinash
• [PATCH v4 03/11] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Philip, Avinash
• [PATCH v4 04/11] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Philip, Avinash
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Philip, Avinash
• [PATCH v4 06/11] pwm: pwm-tiehrpwm: Add device-tree binding support for EHRPWM driver   Philip, Avinash
• [PATCH v4 07/11] pwm: pwm-tiehrpwm: pinctrl support   Philip, Avinash
• [PATCH v4 08/11] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Philip, Avinash
• [PATCH v4 09/11] ARM: dts: AM33XX: Add PWMSS device tree nodes   Philip, Avinash
• [PATCH v4 10/11] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm   Philip, Avinash
• [PATCH v4 11/11] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk   Philip, Avinash
• [PATCH v4 01/11] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Philip, Avinash
• [PATCH v4 04/11] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Philip, Avinash
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Philip, Avinash
• [PATCH v4 06/11] pwm: pwm-tiehrpwm: Add device-tree binding support for EHRPWM driver   Philip, Avinash
• [PATCH v4 09/11] ARM: dts: AM33XX: Add PWMSS device tree nodes   Philip, Avinash
• [PATCH v4 10/11] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm   Philip, Avinash
• [PATCH v4 11/11] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk   Philip, Avinash
• [PATCH v4 00/11] Support for AM33xx PWM Subsystem   Philip, Avinash
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH v3 02/10] ARM: am33xx: clk: Add optional clock for EHRPWM   Philip, Avinash
• [PATCH v3 03/10] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Philip, Avinash
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Philip, Avinash
• [PATCH v3 03/10] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Philip, Avinash
• [PATCH v5 00/12] Support for AM33xx PWM Subsystem   Philip, Avinash
• [PATCH v5 01/12] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Philip, Avinash
• [PATCH v5 02/12] ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries   Philip, Avinash
• [PATCH v5 03/12] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem   Philip, Avinash
• [PATCH v5 04/12] pwm: tiecap: Add device-tree binding   Philip, Avinash
• [PATCH v5 05/12] pwm: pwm-tiecap: pinctrl support   Philip, Avinash
• [PATCH v5 06/12] ARM: AM33XX: clk: Add clock node for EHRPWM TBCLK   Philip, Avinash
• [PATCH v5 07/12] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Philip, Avinash
• [PATCH v5 08/12] pwm: tiehrpwm: Add device-tree binding   Philip, Avinash
• [PATCH v5 09/12] pwm: pwm-tiehrpwm: pinctrl support   Philip, Avinash
• [PATCH v5 10/12] ARM: dts: AM33XX: Add PWMSS device tree nodes   Philip, Avinash
• [PATCH v5 11/12] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm   Philip, Avinash
• [PATCH v5 12/12] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk   Philip, Avinash
• [PATCH v3 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH RESEND v5 0/4] OMAP GPMC DT bindings   Philip, Avinash
• [PATCH v3 0/3] mtd: nand: OMAP: ELM error correction support for BCH ecc   Philip, Avinash
• [PATCH v3 1/3] mtd: nand: omap2: Update nerrors using ecc.strength   Philip, Avinash
• [PATCH v3 2/3] mtd: devices: elm: Add support for ELM error correction   Philip, Avinash
• [PATCH v3 3/3] mtd: nand: omap2: Support for hardware BCH error correction.   Philip, Avinash
• [PATCH v5 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH v5 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH RESEND v5 0/4] OMAP GPMC DT bindings   Philip, Avinash
• [PATCH v5 4/4] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND   Philip, Avinash
• [PATCH v5 00/12] Support for AM33xx PWM Subsystem   Philip, Avinash
• [PATCH 1/5] ARM: EXYNOS: fix the hotplug for Cortex-A15   Lorenzo Pieralisi
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Lorenzo Pieralisi
• [RFC PATCH 1/4] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [RFC PATCH 1/4] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [RFC PATCH 1/4] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [PATCH v2 0/5] ARM: multi-cluster aware boot protocol   Lorenzo Pieralisi
• [PATCH v2 1/5] ARM: kernel: smp_setup_processor_id() updates   Lorenzo Pieralisi
• [PATCH v2 2/5] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [PATCH v2 3/5] ARM: kernel: add cpu logical map DT init in setup_arch   Lorenzo Pieralisi
• [PATCH v2 4/5] ARM: kernel: add logical mappings look-up   Lorenzo Pieralisi
• [PATCH v2 5/5] ARM: gic: use a private mapping for CPU target interfaces   Lorenzo Pieralisi
• [PATCH v2 1/5] ARM: kernel: smp_setup_processor_id() updates   Lorenzo Pieralisi
• [PATCH v2 2/5] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [PATCH v2 1/5] ARM: kernel: smp_setup_processor_id() updates   Lorenzo Pieralisi
• [PATCH v2 2/5] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [PATCH v2 2/5] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [PATCH v2 2/5] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [PATCH v3 0/5] ARM: multi-cluster aware boot protocol   Lorenzo Pieralisi
• [PATCH v3 1/5] ARM: kernel: smp_setup_processor_id() updates   Lorenzo Pieralisi
• [PATCH v3 2/5] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [PATCH v3 3/5] ARM: kernel: add cpu logical map DT init in setup_arch   Lorenzo Pieralisi
• [PATCH v3 4/5] ARM: kernel: add logical mappings look-up   Lorenzo Pieralisi
• [PATCH v3 5/5] ARM: gic: use a private mapping for CPU target interfaces   Lorenzo Pieralisi
• [PATCH v3 1/5] ARM: kernel: smp_setup_processor_id() updates   Lorenzo Pieralisi
• [RFC PATCH v2 0/2] ARM: cpuinfo update for heterogeneous systems   Lorenzo Pieralisi
• [RFC PATCH v2 1/2] ARM: kernel: add MIDR to per-CPU information data   Lorenzo Pieralisi
• [RFC PATCH v2 2/2] ARM: kernel: update cpuinfo to print all online CPUs features   Lorenzo Pieralisi
• [RFC PATCH v2 2/2] ARM: kernel: update cpuinfo to print all online CPUs features   Lorenzo Pieralisi
• [PATCH v4 0/7] ARM: multi-cluster aware boot protocol   Lorenzo Pieralisi
• [PATCH v4 1/7] ARM: kernel: enhance MPIDR macro definitions   Lorenzo Pieralisi
• [PATCH v4 2/7] ARM: kernel: update topology to use new MPIDR macros   Lorenzo Pieralisi
• [PATCH v4 3/7] ARM: kernel: smp_setup_processor_id() updates   Lorenzo Pieralisi
• [PATCH v4 4/7] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [PATCH v4 5/7] ARM: kernel: add cpu logical map DT init in setup_arch   Lorenzo Pieralisi
• [PATCH v4 6/7] ARM: kernel: add logical mappings look-up   Lorenzo Pieralisi
• [PATCH v4 7/7] ARM: gic: use a private mapping for CPU target interfaces   Lorenzo Pieralisi
• [PATCH v4 4/7] ARM: kernel: add device tree init map function   Lorenzo Pieralisi
• [GIT PULL] ARM: multi-cluster aware boot protocol   Lorenzo Pieralisi
• [GIT PULL] ARM: /proc/cpuinfo updates   Lorenzo Pieralisi
• [PATCH] ARM: kernel: fix nr_cpu_ids check in DT logical map init   Lorenzo Pieralisi
• [PATCH] ARM: kernel: fix nr_cpu_ids check in DT logical map init   Lorenzo Pieralisi
• [PATCH] ARM: kernel: fix nr_cpu_ids check in DT logical map init   Lorenzo Pieralisi
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• OMAP baseline test results for v3.7-rc1   Jean Pihet
• [PATCH] i2c: omap: Move the remove constraint   Jean Pihet
• [PATCH] Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints"   Jean Pihet
• [PATCH] Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints"   Jean Pihet
• [PATCH] i2c: omap: Move the remove constraint   Jean Pihet
• [PATCHv2] i2c: omap: Move the remove constraint   Jean Pihet
• [PATCHv2] i2c: omap: Move the remove constraint   Jean Pihet
• [RFC 09/15] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva   Laurent Pinchart
• [RFC 09/15] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva   Laurent Pinchart
• [PATCH 133/493] remove use of __devexit_p   Laurent Pinchart
• [PATCH] ARM: shmobile: r8a7779: Fix PFC - MOD_SEL2 missed an entry   Laurent Pinchart
• [PATCH 6/7] ARM: mach-shmobile: sh73a0: Minimal setup using DT   Laurent Pinchart
• [PATCH 3/7] sh: pfc: Allow device tree registration   Laurent Pinchart
• [PATCH 4/7] ARM: shmobile: pfc-sh73a0: Register device tree   Laurent Pinchart
• [PATCH 3/7] sh: pfc: Allow device tree registration   Laurent Pinchart
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Laurent Pinchart
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Laurent Pinchart
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Laurent Pinchart
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Laurent Pinchart
• [PATCH 3/5] ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT   Laurent Pinchart
• [PATCH 18/24] MAINTAINERS: remove drivers/mmc/host/imxmmc.*   Pavel Pisa
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Nicolas Pitre
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Nicolas Pitre
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Nicolas Pitre
• Building for MMU-less vexpress targets   Nicolas Pitre
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Nicolas Pitre
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Nicolas Pitre
• [RFC PATCH 4/4] ARM: gic: use a private mapping for CPU target interfaces   Nicolas Pitre
• Building for MMU-less vexpress targets   Nicolas Pitre
• Building for MMU-less vexpress targets   Nicolas Pitre
• [RFC PATCH 4/4] ARM: gic: use a private mapping for CPU target interfaces   Nicolas Pitre
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Nicolas Pitre
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Nicolas Pitre
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Nicolas Pitre
• [PATCH] ARM: add get_user() support for 8 byte types   Nicolas Pitre
• [PATCH] arm/crypto: Make asm SHA-1 and AES code Thumb-2 compatible   Nicolas Pitre
• [RFC PATCH v2 1/2] ARM: kernel: add MIDR to per-CPU information data   Nicolas Pitre
• [RFC PATCH v2 2/2] ARM: kernel: update cpuinfo to print all online CPUs features   Nicolas Pitre
• [RFC PATCH v2 2/2] ARM: kernel: update cpuinfo to print all online CPUs features   Nicolas Pitre
• [PATCH v3 1/5] ARM: kernel: smp_setup_processor_id() updates   Nicolas Pitre
• [PATCH v3 2/5] ARM: kernel: add device tree init map function   Nicolas Pitre
• [PATCH v3 3/5] ARM: kernel: add cpu logical map DT init in setup_arch   Nicolas Pitre
• [PATCH v3 4/5] ARM: kernel: add logical mappings look-up   Nicolas Pitre
• [PATCH v4 1/7] ARM: kernel: enhance MPIDR macro definitions   Nicolas Pitre
• [PATCH v4 2/7] ARM: kernel: update topology to use new MPIDR macros   Nicolas Pitre
• [PATCH] arm/crypto: Make asm SHA-1 and AES code Thumb-2 compatible   Nicolas Pitre
• [PATCH] ARM: implement optimized percpu variable access   Nicolas Pitre
• [PATCH] ARM: implement optimized percpu variable access   Nicolas Pitre
• [PATCH] ARM: implement optimized percpu variable access   Nicolas Pitre
• [PATCH] ARM: implement optimized percpu variable access   Nicolas Pitre
• [PATCH] ARM: implement optimized percpu variable access   Nicolas Pitre
• [PATCH v2] ARM: implement optimized percpu variable access   Nicolas Pitre
• [PATCH v2] ARM: implement optimized percpu variable access   Nicolas Pitre
• [PATCH v2] ARM: implement optimized percpu variable access   Nicolas Pitre
• [PATCH RESEND] ARM: at91: dt: evk-pro3: enable uart0 and uart2   Fabio Porcedda
• [PATCH v9 RESEND 0/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v9 RESEND 1/3] watchdog: at91sam9_wdt: add device tree support   Fabio Porcedda
• [PATCH v9 RESEND 2/3] ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45   Fabio Porcedda
• [PATCH v9 RESEND 3/3] ARM: at91/dts: evk-pro3: enable watchdog   Fabio Porcedda
• [PATCH v5 0/8] watchdog: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [PATCH v5 1/8] dt: add helper inline for retrieving timeout-sec property   Fabio Porcedda
• [PATCH v5 2/8] watchdog: core: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [PATCH v5 3/8] watchdog: orion_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH v5 4/8] watchdog: pnx4008: add timeout-sec property binding   Fabio Porcedda
• [PATCH v5 5/8] watchdog: s3c2410_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH v5 6/8] watchdog: at91sam9_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH v5 7/8] watchdog: orion_wdt: move the min_timeout initialization   Fabio Porcedda
• [PATCH v5 8/8] watchdog: WatchDog Timer Driver Core - fix comment   Fabio Porcedda
• [PATCH v5 3/8] watchdog: orion_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH v5 1/8] dt: add helper inline for retrieving timeout-sec property   Fabio Porcedda
• [PATCH v6 0/7] watchdog: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [PATCH v6 1/7] watchdog: core: dt: add support for the timeout-sec dt property   Fabio Porcedda
• [PATCH v6 2/7] watchdog: orion_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH v6 3/7] watchdog: pnx4008: add timeout-sec property binding   Fabio Porcedda
• [PATCH v6 4/7] watchdog: s3c2410_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH v6 5/7] watchdog: at91sam9_wdt: add timeout-sec property binding   Fabio Porcedda
• [PATCH v6 6/7] watchdog: orion_wdt: move the min_timeout initialization   Fabio Porcedda
• [PATCH v6 7/7] watchdog: WatchDog Timer Driver Core - fix comment   Fabio Porcedda
• [RFC PATCH v3 02/16] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• Migrating from lpc3130 to lpc3141 processor   Mridula Prakash
• arch-vt8500 and wm8850 support   Tony Prisk
• arch-vt8500 and wm8850 support   Tony Prisk
• pwm_backlight/general pwm issue.   Tony Prisk
• [PATCH 0/2] pwm fixes for 3.8   Tony Prisk
• [PATCH 1/2] Fix build error in pwm-vt8500.c   Tony Prisk
• [PATCH 2/2] pwm: vt8500: Ensure pwm clock is enabled during pwm_config   Tony Prisk
• [PATCH v2 0/2] pwm fixes for 3.8   Tony Prisk
• [PATCH v2 1/2] Fix build error in pwm-vt8500.c   Tony Prisk
• [PATCH v2 2/2] pwm: vt8500: Ensure pwm clock is enabled during pwm_config   Tony Prisk
• [PATCH v3 0/2] pwm fixes for 3.8   Tony Prisk
• [PATCH v3 1/2] Fix build error in pwm-vt8500.c   Tony Prisk
• [PATCH v3 2/2] pwm: vt8500: Ensure pwm clock is enabled during pwm_config   Tony Prisk
• [PATCH] ARM: use clockevents_config_and_register() where possible   Tony Prisk
• [PATCH -next] mmc: wmt-sdmmc: fix potential NULL pointer dereference in wmt_mci_probe()   Tony Prisk
• [PATCH v2 03/14] ARM: OMAP5: id: Add cpu id for ES versions   Roger Quadros
• [RFC 3/6] sched: pack small tasks   Morten Rasmussen
• [RFC 3/6] sched: pack small tasks   Morten Rasmussen
• [RFC 3/6] sched: pack small tasks   Morten Rasmussen
• [PATCH v5] pwm: vt8500: Update vt8500 PWM driver support   Thierry Reding
• [PATCH] pwm: lpc32xx - Add a driver for the motor PWM   Thierry Reding
• [PATCH] pwm: lpc32xx - Add a driver for the motor PWM   Thierry Reding
• [PATCH v2 01/10] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Thierry Reding
• [PATCH v2 04/10] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Thierry Reding
• [PATCH v2 06/10] pwm: pwm-tiehrpwm: Add device-tree binding support for EHRPWM driver   Thierry Reding
• [PATCH v2 08/10] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Thierry Reding
• [PATCH v2 04/10] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Thierry Reding
• [PATCH v2 04/10] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Thierry Reding
• [PATCH 2/2] ARM: tegra: trimslice: enable HDMI port   Thierry Reding
• [PATCH 0/3] ARM: tegra: Enable HDMI on Tamonten carriers   Thierry Reding
• [PATCH 1/3] ARM: tegra: tamonten: Add host1x support   Thierry Reding
• [PATCH 2/3] ARM: tegra: plutux: Enable HDMI output   Thierry Reding
• [PATCH 3/3] ARM: tegra: tec: Enable HDMI output   Thierry Reding
• [PATCH 1/2] pwm: lpc32xx - Add a driver for the motor PWM   Thierry Reding
• pwm_backlight/general pwm issue.   Thierry Reding
• [PATCH] ARM: tegra: seaboard: enable internal LCD   Thierry Reding
• [PATCH 1/2] Fix build error in pwm-vt8500.c   Thierry Reding
• [PATCH 2/2] pwm: vt8500: Ensure pwm clock is enabled during pwm_config   Thierry Reding
• [PATCH v2 2/2] pwm: vt8500: Ensure pwm clock is enabled during pwm_config   Thierry Reding
• [PATCH 1/2] Fix build error in pwm-vt8500.c   Thierry Reding
• [PATCH v3 0/2] pwm fixes for 3.8   Thierry Reding
• [PATCH v2] pwm: Device tree support for PWM polarity.   Thierry Reding
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCH v4 01/11] PWMSS: Add PWM Subsystem driver for parent<->child relationship   Thierry Reding
• [PATCH v4 04/11] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Thierry Reding
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Thierry Reding
• [PATCH v4 06/11] pwm: pwm-tiehrpwm: Add device-tree binding support for EHRPWM driver   Thierry Reding
• [PATCH v4 07/11] pwm: pwm-tiehrpwm: pinctrl support   Thierry Reding
• [PATCH v4 08/11] pwm: pwm-tiehrpwm: Adding TBCLK gating support.   Thierry Reding
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Thierry Reding
• [PATCH v4 09/11] ARM: dts: AM33XX: Add PWMSS device tree nodes   Thierry Reding
• [PATCH v4 10/11] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm   Thierry Reding
• [PATCH v4 11/11] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk   Thierry Reding
• [PATCH v4 00/11] Support for AM33xx PWM Subsystem   Thierry Reding
• [PATCH v3] pwm: Device tree support for PWM polarity.   Thierry Reding
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCH v4 04/11] pwm: pwm-tiecap: Add device-tree binding support for APWM driver   Thierry Reding
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Thierry Reding
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Thierry Reding
• [PATCH v4 05/11] pwm: pwm-tiecap: pinctrl support   Thierry Reding
• [PATCH v5 00/12] Support for AM33xx PWM Subsystem   Thierry Reding
• [PATCH 1/1] ARM: tegra: bus_notifier registers IOMMU devices(was: How to specify IOMMU'able devices in DT)   Thierry Reding
• usb clock not found on imx27 when using dt   Philippe Reynes
• [PATCH v4] Add device tree file for the armadeus apf27   Philippe Reynes
• [PATCH 0/4] apf27: enable Ethernet PHY and add support of ds1374 rtc   Philippe Reynes
• [PATCH 1/4] apf27: enable Ethernet PHY   Philippe Reynes
• [PATCH 2/4] ds1374: add support of device tree   Philippe Reynes
• [PATCH 3/4] imx27-dt: configure i2c1 gpio on armadeus apf27   Philippe Reynes
• [PATCH 4/4] apf27: add rtc ds1374 to the device tree   Philippe Reynes
• [PATCH 1/1] ARM: oprofile: add A5/A7/A15 entries in op_perf_name   Robert Richter
• [PATCH 1/1] ARM: oprofile: add A5/A7/A15 entries in op_perf_name   Robert Richter
• [PATCH 1/1] ARM: oprofile: add A5/A7/A15 entries in op_perf_name   Robert Richter
• [PATCH 1/1] ARM: oprofile: add A5/A7/A15 entries in op_perf_name   Robert Richter
• [PATCH 01/16] mm: add anon_vma_lock to validate_mm()   Rik van Riel
• [PATCH 09/16] mm: use vm_unmapped_area() in hugetlbfs on i386 architecture   Rik van Riel
• [PATCH 08/16] mm: use vm_unmapped_area() in hugetlbfs   Rik van Riel
• [PATCH 10/16] mm: use vm_unmapped_area() on mips architecture   Rik van Riel
• [PATCH 12/16] mm: use vm_unmapped_area() on sh architecture   Rik van Riel
• [PATCH 11/16] mm: use vm_unmapped_area() on arm architecture   Rik van Riel
• [PATCH 13/16] mm: use vm_unmapped_area() on sparc64 architecture   Rik van Riel
• [PATCH 14/16] mm: use vm_unmapped_area() in hugetlbfs on sparc64 architecture   Rik van Riel
• [PATCH 15/16] mm: use vm_unmapped_area() on sparc32 architecture   Rik van Riel
• [PATCH 16/16] mm: use vm_unmapped_area() in hugetlbfs on tile architecture   Rik van Riel
• [PATCH 15/16] mm: use vm_unmapped_area() on sparc32 architecture   Rik van Riel
• [PATCH 09/16] mm: use vm_unmapped_area() in hugetlbfs on i386 architecture   Rik van Riel
• [PATCH 0/2] Pinctrl muxing for the Crystalfontz boards   Maxime Ripard
• [PATCH 1/2] ARM: dts: cfa10036: Use pinctrl for power led   Maxime Ripard
• [PATCH 2/2] ARM: dts: mxs: Add hog pins to Crystalfontz boards   Maxime Ripard
• [PATCH 0/2] Pinctrl muxing for the Crystalfontz boards   Maxime Ripard
• [PATCH] ARM: mxs: apf28dev: Add I2C, SPI and spidev support   Maxime Ripard
• [PATCH 0/3] Add support of the PCA9555 to the CFA-10049   Maxime Ripard
• [PATCH 1/3] gpio: pca953x: Register an IRQ domain   Maxime Ripard
• [PATCH 2/3] gpio: pca953x: Add compatible strings to gpio-pca953x driver   Maxime Ripard
• [PATCH 3/3] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Maxime Ripard
• [PATCHv6 0/2] Add support for the OLED in the CFA10036   Maxime Ripard
• [PATCH 0/6] Add basic support for Allwinner A1X SoCs   Maxime Ripard
• [PATCH 1/6] clocksource: sunxi: Add Allwinner A1X Timer Driver   Maxime Ripard
• [PATCH 2/6] irqchip: sunxi: Add irq controller driver   Maxime Ripard
• [PATCH 3/6] ARM: sunxi: Add basic support for Allwinner A1x SoCs   Maxime Ripard
• [PATCH 4/6] ARM: sunxi: Add earlyprintk support   Maxime Ripard
• [PATCH 5/6] ARM: sunxi: Add device tree for the A13 and the Olinuxino board   Maxime Ripard
• [PATCH 6/6] ARM: sunxi: Add entry to MAINTAINERS   Maxime Ripard
• [PATCH 2/6] irqchip: sunxi: Add irq controller driver   Maxime Ripard
• [PATCH 3/6] ARM: sunxi: Add basic support for Allwinner A1x SoCs   Maxime Ripard
• [PATCH 4/6] ARM: sunxi: Add earlyprintk support   Maxime Ripard
• [PATCH 5/6] ARM: sunxi: Add device tree for the A13 and the Olinuxino board   Maxime Ripard
• [PATCH 0/6] Add basic support for Allwinner A1X SoCs   Maxime Ripard
• [PATCHv2 0/7] Add basic support for Allwinner A1X SoCs   Maxime Ripard
• [PATCH 1/7] clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs   Maxime Ripard
• [PATCH 2/7] clocksource: sunxi: Add Allwinner A1X Timer Driver   Maxime Ripard
• [PATCH 3/7] irqchip: sunxi: Add irq controller driver   Maxime Ripard
• [PATCH 4/7] ARM: sunxi: Add basic support for Allwinner A1x SoCs   Maxime Ripard
• [PATCH 5/7] ARM: sunxi: Add earlyprintk support   Maxime Ripard
• [PATCH 6/7] ARM: sunxi: Add device tree for the A13 and the Olinuxino board   Maxime Ripard
• [PATCH 7/7] ARM: sunxi: Add entry to MAINTAINERS   Maxime Ripard
• [PATCHv2 0/7] Add basic support for Allwinner A1X SoCs   Maxime Ripard
• [GIT PULL] ARM: sunxi: Add basic support for Allwinner SoCs   Maxime Ripard
• [PATCH] ARM: sunxi: Add sun4i/cubieboard (A10) support   Maxime Ripard
• [PATCH 3/3] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Maxime Ripard
• [PATCH 1/4] ARM: sunxi: Restructure sunxi dts/dtsi files   Maxime Ripard
• [PATCH 2/4] ARM: sunxi: Add earlyprintk support for UART0 (sun4i)   Maxime Ripard
• [PATCH 3/4] ARM: sunxi: Add sun4i and cubieboard support   Maxime Ripard
• [PATCH 4/4] ARM: sunxi: Add sunxi restart function via onchip watchdog   Maxime Ripard
• [PATCHv2] ARM: sunxi: Add sunxi restart function via onchip watchdog   Maxime Ripard
• [PATCH 3/3] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Maxime Ripard
• [PATCHv2] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Maxime Ripard
• [PATCH 2/2] ARM: dts: mxs: add oled support for the cfa-10036   Maxime Ripard
• [GIT PULL] ARM: sunxi: support for sun4i (A10) SoCs   Maxime Ripard
• [PATCH] ARM: multi_v7_defconfig: Add ARCH_SUNXI   Maxime Ripard
• [PATCHv2] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Maxime Ripard
• [PATCHv2] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Maxime Ripard
• [PATCH] ARM: sunxi: Add missing sun4i.dtsi file   Maxime Ripard
• [PATCH] ARM: sunxi: add missing include for mdelay()   Maxime Ripard
• [PATCH] clocksource: use clockevents_config_and_register() where possible   Maxime Ripard
• [PATCH 0/6] drivers: convert struct spinlock to spinlock_t   Luis R. Rodriguez
• [PATCH 1/6] ux500: convert struct spinlock to spinlock_t   Luis R. Rodriguez
• [PATCH 2/6] i915: convert struct spinlock to spinlock_t   Luis R. Rodriguez
• [PATCH 3/6] s5p-fimc: convert struct spinlock to spinlock_t   Luis R. Rodriguez
• [PATCH 4/6] s5p-jpeg: convert struct spinlock to spinlock_t   Luis R. Rodriguez
• [PATCH 5/6] brcmfmac: convert struct spinlock to spinlock_t   Luis R. Rodriguez
• [PATCH 6/6] ie6xx_wdt: convert struct spinlock to spinlock_t   Luis R. Rodriguez
• [PATCH 0/6] drivers: convert struct spinlock to spinlock_t   Luis R. Rodriguez
• [PATCH 0/6] drivers: convert struct spinlock to spinlock_t   Luis R. Rodriguez
• [PATCH] hwmon: Only include of_match_table with CONFIG_OF_GPIO   Guenter Roeck
• [PATCH 2/2] hwmon: MMA8451: Add mma8451 3 axis digtial accelerometer driver   Guenter Roeck
• [PATCH 4/4] iommu/exynos: enhancements of System MMU driver with DT   'Joerg Roedel'
• [PATCH v5 0/6] Move rest of omap-iommu to live in drivers/iommu   Joerg Roedel
• [PATCH 0/9] dma_debug: add debug_dma_mapping_error support to architectures that support DMA_DEBUG_API   Joerg Roedel
• [PATCH 0/9] dma_debug: add debug_dma_mapping_error support to architectures that support DMA_DEBUG_API   Joerg Roedel
• [PATCH 0/6] Add basic support for Allwinner A1X SoCs   Stefan Roese
• [PATCH 2/6] irqchip: sunxi: Add irq controller driver   Stefan Roese
• [PATCH 3/6] ARM: sunxi: Add basic support for Allwinner A1x SoCs   Stefan Roese
• [PATCH 4/6] ARM: sunxi: Add earlyprintk support   Stefan Roese
• [PATCH 5/6] ARM: sunxi: Add device tree for the A13 and the Olinuxino board   Stefan Roese
• [PATCH 0/6] Add basic support for Allwinner A1X SoCs   Stefan Roese
• [PATCH 2/6] irqchip: sunxi: Add irq controller driver   Stefan Roese
• [PATCHv2 0/7] Add basic support for Allwinner A1X SoCs   Stefan Roese
• [PATCH] ARM: sunxi: Add sun4i/cubieboard (A10) support   Stefan Roese
• [PATCH] ARM: sunxi: Add sun4i/cubieboard (A10) support   Stefan Roese
• [PATCH 1/4] ARM: sunxi: Restructure sunxi dts/dtsi files   Stefan Roese
• [PATCH 2/4] ARM: sunxi: Add earlyprintk support for UART0 (sun4i)   Stefan Roese
• [PATCH 3/4] ARM: sunxi: Add sun4i and cubieboard support   Stefan Roese
• [PATCH 4/4] ARM: sunxi: Add sunxi restart function via onchip watchdog   Stefan Roese
• [PATCH 4/4] ARM: sunxi: Add sunxi restart function via onchip watchdog   Stefan Roese
• [PATCH] ARM: sunxi: Add missing sun4i.dtsi file   Stefan Roese
• [PATCH v4] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Francois Romieu
• [PATCH v6 2/7] net: mvneta: driver for Marvell Armada 370/XP network unit   Francois Romieu
• linux-next: manual merge of the arm-soc tree with the l2-mtd and pinctrl trees   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the l2-mtd and pinctrl trees   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the pinctrl tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the usb tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the net-next tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the pinctrl tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the usb tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the net-next tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the i2c-embedded tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the pinctrl tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the net-next tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the sound-asoc and pincrtl trees   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm-soc and pincrtl trees   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the thermal tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the thermal tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the l2-mtd tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the mmc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• linux-next: manual merge of the samsung tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the samsung tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the slave-dma tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the l2-mtd tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the slave-dma tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the battery tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the usb tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the slave-dma tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the thermal tree   Stephen Rothwell
• linux-next: manual merge of the clk tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the driver-core tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the omap_dss2 tree   Stephen Rothwell
• [PATCH 1/5] ARM: AT91SAM9G45: fix crypto peripherals irq issue due to sparse irq support.   Nicolas Royer
• [PATCH 2/5] ARM: AT91SAM9G45: same platform data structure for all crypto peripherals   Nicolas Royer
• [PATCH 3/5] crypto: Atmel AES driver: add support for latest release of the IP (0x130)   Nicolas Royer
• [PATCH 4/5] crypto: Atmel TDES driver: add support for latest release of the IP (0x700)   Nicolas Royer
• [PATCH 5/5] crypto: Atmel SHA driver: add support for latest release of the IP (0x410)   Nicolas Royer
• [PATCH 2/5 v2] ARM: AT91SAM9G45: same platform data structure for all crypto peripherals   Nicolas Royer
• [PATCH 2/5 v3] ARM: AT91SAM9G45: same platform data structure for all crypto peripherals   Nicolas Royer
• [PATCH 1/8 v3] DMA: PL330: use prefix in reg names to build under x86   Alessandro Rubini
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Måns Rullgård
• [kvmarm] [PATCH v4 09/14] KVM: ARM: Emulation framework and CP15 emulation   Rusty Russell
• [PATCH v2 2/5] ARM: kernel: add device tree init map function   Mark Rutland
• [PATCH v3 2/5] ARM: kernel: add device tree init map function   Mark Rutland
• [PATCH v4 4/7] ARM: kernel: add device tree init map function   Mark Rutland
• [PATCH 00/10] Unify arm_generic and arch_timer drivers   Mark Rutland
• [PATCH 01/10] arm: arch_timer: remove redundant available check   Mark Rutland
• [PATCH 02/10] arm: arch_timer: use u64/u32 for register data   Mark Rutland
• [PATCH 03/10] arm: arch_timer: standardise counter reading   Mark Rutland
• [PATCH 04/10] arm: arch_timer: split cntfrq accessor   Mark Rutland
• [PATCH 05/10] arm: arch_timer: factor out register accessors   Mark Rutland
• [PATCH 06/10] arm: arch_timer: divorce from local_timer api   Mark Rutland
• [PATCH 07/10] arm: arch_timer: add arch_counter_enable_user_access   Mark Rutland
• [PATCH 08/10] arm: arch_timer: move core to drivers/clocksource   Mark Rutland
• [PATCH 09/10] arm64: move from arm_generic to arm_arch_timer   Mark Rutland
• [PATCH 10/10] Documentation: Add ARMv8 to arch_timer devicetree   Mark Rutland
• [RFC/PATCH] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete   Venkatraman S
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Etienne CARRIERE ST
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Etienne CARRIERE ST
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Etienne CARRIERE ST
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Etienne CARRIERE ST
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Etienne CARRIERE ST
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Etienne CARRIERE ST
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Etienne CARRIERE ST
• [PATCH 1/2] arm/mm: L2CC shared mutex with ARM TZ   Etienne CARRIERE ST
• [PATCH] i2c: mxs: remove broken PIOQUEUE support   Wolfram Sang
• [PATCH] i2c: mxs: remove broken PIOQUEUE support   Wolfram Sang
• [PATCH] i2c: omap: ensure writes to dev->buf_len are ordered   Wolfram Sang
• [PATCH] i2c: at91: add a sanity check on i2c message length   Wolfram Sang
• [PATCH] i2c: at91: add a sanity check on i2c message length   Wolfram Sang
• [PATCH] i2c: at91: add a sanity check on i2c message length   Wolfram Sang
• [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Wolfram Sang
• [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Wolfram Sang
• [PATCH] bindings: i2c: use consistent naming for i2c binding descriptions   Wolfram Sang
• [PATCH v2] i2c: i2c-gpio: fix name issue when i2c gpio node GT 1   Wolfram Sang
• [PATCH v2] i2c: at91: add dma support   Wolfram Sang
• [PATCH v2] i2c: at91: fix SMBus quick command   Wolfram Sang
• [PATCH] Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints"   Wolfram Sang
• [PATCH] i2c: omap: Move the remove constraint   Wolfram Sang
• [PATCH v2] i2c: omap: ensure writes to dev->buf_len are ordered   Wolfram Sang
• [PATCHv3 0/7] i2c: omap: updates   Wolfram Sang
• [PATCH v3] i2c: omap: ensure writes to dev->buf_len are ordered   Wolfram Sang
• [PATCH 0/8] I2C patches for v3.8 merge window   Wolfram Sang
• Fwd: [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Wolfram Sang
• Fwd: [PATCH 1/7] I2c-nomadik: Fix the usage of wait_for_completion_timeout   Wolfram Sang
• [PATCH 0/5] i2c-sh_mobile non-urgent changes   Wolfram Sang
• [PATCH 1/2] i2c: mux: Add dt support to i2c-mux-gpio driver   Wolfram Sang
• [PATCH 2/2] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Wolfram Sang
• [PATCH] i2c: i2c-s3c2410: Add support for pinctrl   Wolfram Sang
• [PATCH 0/4] i2c-s3c2410: Fix a bug and optimize code   Wolfram Sang
• [PATCH 2/2] ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049   Wolfram Sang
• [PATCHv3] i2c: omap: Move the remove constraint   Wolfram Sang
• [PATCH v3 0/3] i2c: at91: add dma support   Wolfram Sang
• [PATCH v3 0/3] i2c: at91: add dma support   Wolfram Sang
• [PATCH 065/493] i2c: remove use of __devexit_p   Wolfram Sang
• [RESEND PATCH v3 0/3] i2c: at91: add dma support   Wolfram Sang
• [PATCHv2] i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag   Wolfram Sang
• [PATCH] add hardware I2C support for ARM IMX23   Wolfram Sang
• [PATCH] add hardware I2C support for ARM IMX23   Wolfram Sang
• [PATCH] add hardware I2C support for ARM IMX23   Wolfram Sang
• [PATCH] ARM: tegra: enable data prefetch on L2   Peter De Schrijver
• [PATCH] ARM: tegra: enable data prefetch on L2   Peter De Schrijver
• [PATCH] ARM: tegra: retain L2 content over CPU suspend/resume   Peter De Schrijver
• [PATCH] ARM: tegra: Implement 6395/1 for Tegra   Peter De Schrijver
• [PATCH v4 00/12] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Rahul Sharma
• [Patch v2 3/4] ASoC: atmel-ssc-dai: register platform from DAIs   Bo Shen
• [Patch v2 3/4] ASoC: atmel-ssc-dai: register platform from DAIs   Bo Shen
• [Patch v2 3/4] ASoC: atmel-ssc-dai: register platform from DAIs   Bo Shen
• [RFC patch v3 1/4] ARM: at91: atmel-ssc: add platform device id table   Bo Shen
• [RFC patch v3 2/4] ARM: at91: atmel-ssc: add device tree support   Bo Shen
• [RFC patch v3 3/4] ASoC: atmel-ssc-dai: register dai and pcm directly   Bo Shen
• [RFC patch v3 4/4] ASoC: sam9g20-wm8731: convert dt support   Bo Shen
• [RFC patch v3 3/4] ASoC: atmel-ssc-dai: register dai and pcm directly   Bo Shen
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Bo Shen
• [RFC patch v3 3/4] ASoC: atmel-ssc-dai: register dai and pcm directly   Bo Shen
• [Resend PATCH v3 2/4] ARM: at91: atmel-ssc: add device tree support   Bo Shen
• [RFC PATCH v4 1/2] ASoC: atmel-ssc-dai: register dai and pcm directly   Bo Shen
• [RFC PATCH v4 2/2] ASoC: sam9g20-wm8731: convert to dt support   Bo Shen
• [PATCH v5 0/3] Add pinctrl support and enable audio   Bo Shen
• [PATCH v5 1/3] ARM: at91: atmel-ssc: add pinctrl support   Bo Shen
• [PATCH v5 2/3] ASoC: atmel-ssc-dai: register dai and pcm directly   Bo Shen
• [PATCH 3/3] ASoC: at91sam9g20ek-wm8731: convert to dt support   Bo Shen
• [PATCH v5 2/3] ASoC: atmel-ssc-dai: register dai and pcm directly   Bo Shen
• [PATCH v5 2/3] ASoC: atmel-ssc-dai: register dai and pcm directly   Bo Shen
• [PATCH v5 2/3] ASoC: atmel-ssc-dai: register dai and pcm directly   Bo Shen
• [PATCH v5 1/3] ARM: at91: atmel-ssc: add pinctrl support   Bo Shen
• [Patch v6 0/4] ASoC: atmel-ssc: Add pinctrl support and change register method   Bo Shen
• [Patch v6 1/4] ARM: at91: atmel-ssc: add pinctrl support   Bo Shen
• [Patch v6 2/4] ASoC: atmel-ssc-dai: register dai and pcm directly   Bo Shen
• [Patch v6 3/4] ASoC: atmel-ssc-dai: match new method of dai and pcm register   Bo Shen
• [Patch v6 4/4] ASoC: at91sam9g20ek-wm8731: convert to dt support   Bo Shen
• [Patch v6 1/4] ARM: at91: atmel-ssc: add pinctrl support   Bo Shen
• [Resend v6 PATCH 1/2] ARM: at91: atmel-ssc: add pinctrl nodes   Bo Shen
• [Resend v6 PATCH 2/2] ASoC: atmel-ssc: add pinctrl consumer   Bo Shen
• [Resend v6 PATCH 2/2] ASoC: atmel-ssc: add pinctrl consumer   Bo Shen
• [Resend v6 PATCH 2/2] ASoC: atmel-ssc: add pinctrl consumer   Bo Shen
• [PATCH 1/2] ASoC: atmel-ssc: add phybase in device structure   Bo Shen
• [PATCH 2/2] ASoC: atmel-pcm: add dma support   Bo Shen
• [PATCH 2/2] ASoC: atmel-pcm: add dma support   Bo Shen
• [Resend v6 PATCH 2/2] ASoC: atmel-ssc: add pinctrl consumer   Bo Shen
• [Resend v6 PATCH 2/2] ASoC: atmel-ssc: add pinctrl consumer   Bo Shen
• [Resend PATCH v6 1/4] pinctrl: atmel-ssc: add pinctrl support   Bo Shen
• [PATCH 0/3] ASoC: atmel-pcm: add dma support   Bo Shen
• [PATCH 1/3] ASoC: snd_dmaengine_pcm: add inline empty function   Bo Shen
• [PATCH 2/3] ASoC: atmel-pcm: prepare for adding dma support   Bo Shen
• [PATCH 3/3] ASoC: atmel-pcm: add dma support   Bo Shen
• [PATCH 3/3] ASoC: atmel-pcm: add dma support   Bo Shen
• [Patch v6 4/4] ASoC: at91sam9g20ek-wm8731: convert to dt support   Bo Shen
• [PATCH 1/2] ASoC: atmel-pcm: split into two file   Bo Shen
• [PATCH 2/2] ASoC: atmel-pcm: dma support based on pcm dmaengine   Bo Shen
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Huang Shijie
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Huang Shijie
• [PATCH v2 2/3] serial: mxs-auart: add the DMA support for mx28   Huang Shijie
• [PATCH v3 0/3] serial: mxs-auart: add DMA support for auart in mx28   Huang Shijie
• [PATCH v3 1/3] serial: mxs-auart: distinguish the different SOCs   Huang Shijie
• [PATCH v3 2/3] serial: mxs-auart: add the DMA support for mx28   Huang Shijie
• [PATCH v3 3/3] ARM: dts: enable dma support for auart0 in mx28   Huang Shijie
• [PATCH v3 0/3] serial: mxs-auart: add DMA support for auart in mx28   Huang Shijie
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   Santosh Shilimkar
• [RFC PATCH] ARM: OMAP4: ID: Improve features detection and check   Santosh Shilimkar
• [RFC PATCH] ARM: OMAP4: ID: Improve features detection and check   Santosh Shilimkar
• [RFC PATCH] ARM: OMAP4: ID: Improve features detection and check   Santosh Shilimkar
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Santosh Shilimkar
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Santosh Shilimkar
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Santosh Shilimkar
• [RFC 2/6] sched: add a new SD SHARE_POWERLINE flag for sched_domain   Santosh Shilimkar
• [RFC 3/6] sched: pack small tasks   Santosh Shilimkar
• [RFC 5/6] sched: pack the idle load balance   Santosh Shilimkar
• [RFC 6/6] ARM: sched: clear SD_SHARE_POWERLINE   Santosh Shilimkar
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Santosh Shilimkar
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Santosh Shilimkar
• [PATCH 01/15] ARM: OMAP2+: mailbox: Add an API for flushing the FIFO   Santosh Shilimkar
• [PATCH 02/15] ARM: OMAP2+: mailbox: Add support for AM33XX   Santosh Shilimkar
• [PATCH 03/15] ARM: OMAP: mailbox: Convert to device_initcall   Santosh Shilimkar
• [PATCH 05/15] ARM: OMAP2+: AM33XX: Update WKUP_M3 hwmod entry for reset status   Santosh Shilimkar
• [PATCH 06/15] ARM: OMAP2+: hwmod: Enable OCMCRAM registration in AM33XX   Santosh Shilimkar
• [PATCH 08/15] ARM: OMAP2+: hwmod: Fix the omap_hwmod_addr_space for CPGMAC0   Santosh Shilimkar
• [PATCH 09/15] ARM: OMAP: AM33XX: Remove unnecessary include and use __ASSEMBLER__ macros   Santosh Shilimkar
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Santosh Shilimkar
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Santosh Shilimkar
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Santosh Shilimkar
• [PATCH 12/15] ARM: OMAP: timer: Add suspend-resume callbacks for clockevent device   Santosh Shilimkar
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Santosh Shilimkar
• [PATCH 01/15] ARM: OMAP2+: mailbox: Add an API for flushing the FIFO   Santosh Shilimkar
• [PATCH 02/15] ARM: OMAP2+: mailbox: Add support for AM33XX   Santosh Shilimkar
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Santosh Shilimkar
• [PATCH 13/15] ARM: DTS: AM33XX: Add nodes for OCMCRAM and Mailbox   Santosh Shilimkar
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Santosh Shilimkar
• [PATCH 11/15] ARM: OMAP: timer: Interchange clksrc and clkevt for AM33XX   Santosh Shilimkar
• [PATCH 1/5] ARM: EXYNOS: fix the hotplug for Cortex-A15   Santosh Shilimkar
• [PATCH 15/15] ARM: OMAP2+: AM33XX: Basic suspend resume support   Santosh Shilimkar
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Santosh Shilimkar
• [PATCH] ARM: setup_mm_for_reboot(): use flush_cache_louis()   Santosh Shilimkar
• [PATCH V2 01/14] ARM: OMAP: Add DMTIMER definitions for posted mode   Santosh Shilimkar
• [PATCH V2 02/14] ARM: OMAP2+: Disable posted mode for the clocksource timer   Santosh Shilimkar
• [PATCH V2 03/14] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Santosh Shilimkar
• [PATCH V2 01/14] ARM: OMAP: Add DMTIMER definitions for posted mode   Santosh Shilimkar
• [PATCH V2 04/14] ARM: OMAP: Fix timer posted mode support   Santosh Shilimkar
• [PATCH V2 00/14] ARM: OMAP: DMTIMER fixes   Santosh Shilimkar
• [PATCH V2 03/14] ARM: OMAP3+: Implement timer workaround for errata i103 and i767   Santosh Shilimkar
• [PATCH v2 1/2] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Santosh Shilimkar
• [PATCH 5/6] ARM: OMAP4: MPUSS PM: remove unnecessary shim functions for powerdomain control   Santosh Shilimkar
• [PATCH 2/3] ARM: OMAP4: Fix build error and warning in timer.c   Santosh Shilimkar
• [PATCH 1/3] ARM: OMAP2+: Fix realtime_counter_init warning in timer.c   Santosh Shilimkar
• [PATCH 3/3] ARM: AM335x: Fix warning in timer.c   Santosh Shilimkar
• [PATCH 3/3] ARM: AM335x: Fix warning in timer.c   Santosh Shilimkar
• [PATCH 1/3] ARM: OMAP2+: Fix realtime_counter_init warning in timer.c   Santosh Shilimkar
• [PATCH 1/3] ARM: OMAP2+: Fix realtime_counter_init warning in timer.c   Santosh Shilimkar
• [PATCH 1/3] ARM: OMAP2+: Fix realtime_counter_init warning in timer.c   Santosh Shilimkar
• [PATCH V2 3/4] ARM: AM335x: Fix warning in timer.c   Santosh Shilimkar
• [PATCH V2 4/4] ARM: OMAP2+: Fix sparse warnings in timer.c   Santosh Shilimkar
• [GIT PULL 1/3] omap late timer clean-up (and a warning fix) for v3.8 merge window   Santosh Shilimkar
• [PATCH 1/6] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove   Alexander Shishkin
• [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx   Alexander Shishkin
• [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx   Alexander Shishkin
• [PATCH 4/6] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Alexander Shishkin
• [PATCH 5/9] usb: add phy connection by phy-mode   Alexander Shishkin
• [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata   Alexander Shishkin
• [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata   Alexander Shishkin
• [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata   Alexander Shishkin
• [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Alexander Shishkin
• [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata   Alexander Shishkin
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Alexander Shishkin
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Alexander Shishkin
• [PATCH 7/9] usb: chipidea: udc: add force-full-speed option   Alexander Shishkin
• [PATCH 8/9] usb: chipidea: udc: remove unlocked ep_queue which can lead to an race   Alexander Shishkin
• [PATCH v2 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock   Alexander Shishkin
• [PATCH v2 6/7] usb: chipidea: usbmisc: add mx53 support   Alexander Shishkin
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Alexander Shishkin
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Alexander Shishkin
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling   Alexander Shishkin
• [PATCH v3 0/7] support other fsl SoCs with usbmisc + small fixes   Alexander Shishkin
• [PATCH v3 3/7] usb: chipidea: usbmisc: fix a potential race condition   Alexander Shishkin
• [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Alexander Shishkin
• [PATCH v3 2/7] usb: chipidea: add otg file   Alexander Shishkin
• [PATCH v3 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect   Alexander Shishkin
• [PATCH 01/15] ARM: clps711x: Load serial driver from boards   Alexander Shiyan
• [PATCH 02/15] ARM: clps711x: Using platform_driver for ethernet device   Alexander Shiyan
• [PATCH 03/15] ARM: clps711x: p720t: Using "leds-gpio" driver for LED control   Alexander Shiyan
• [PATCH 04/15] ARM: clps711x: Transform clps711x-framebuffer to platform driver and use it   Alexander Shiyan
• [PATCH 05/15] ARM: clps711x: p720t: Unneeded inclusion of head-sa1100.S removed   Alexander Shiyan
• [PATCH 06/15] ARM: clps711x: Always select AUTO_ZRELADDR for a platform   Alexander Shiyan
• [PATCH 07/15] ARM: clps711x: cdb89712: Special driver for handling memory is removed   Alexander Shiyan
• [PATCH 08/15] ARM: clps711x: Implement usage "SPARSE_IRQ" kernel option for a platform   Alexander Shiyan
• [PATCH 09/15] ARM: clps711x: Implement usage "MULTI_IRQ_HANDLER" kernel option for a platform   Alexander Shiyan
• [PATCH 10/15] ARM: clps711x: Add FIQ interrupt handling   Alexander Shiyan
• [PATCH 11/15] ARM: clps711x: Unused empty "ACK" calls for IRQ-chips removed   Alexander Shiyan
• [PATCH 12/15] ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed   Alexander Shiyan
• [PATCH 13/15] ARM: clps711x: Rename board files to match functionality   Alexander Shiyan
• [PATCH 14/15] ARM: clps711x: Update defconfig due latest changes and new kernel symbols   Alexander Shiyan
• [PATCH 15/15] MAINTAINERS: Add ARM CLPS711X entry   Alexander Shiyan
• [PATCH 00/15] ARM: Patchset for CLPS711X   Alexander Shiyan
• [PATCH 01/15] ARM: clps711x: Load serial driver from boards   Alexander Shiyan
• [PATCH RESEND] ARM/SPI: New driver for SPI master controller for CLPS711X-target   Alexander Shiyan
• [PATCH v2 00/17] ARM: Patchset for CLPS711X   Alexander Shiyan
• [PATCH v2 01/17] ARM: clps711x: Load serial driver from boards   Alexander Shiyan
• [PATCH v2 02/17] ARM: clps711x: Using platform_driver for ethernet device   Alexander Shiyan
• [PATCH v2 03/17] ARM: clps711x: p720t: Using "leds-gpio" driver for LED control   Alexander Shiyan
• [PATCH v2 04/17] ARM: clps711x: Transform clps711x-framebuffer to platform driver and use it   Alexander Shiyan
• [PATCH v2 05/17] ARM: clps711x: p720t: Unneeded inclusion of head-sa1100.S removed   Alexander Shiyan
• [PATCH v2 06/17] ARM: clps711x: Always select AUTO_ZRELADDR for a platform   Alexander Shiyan
• [PATCH v2 07/17] ARM: clps711x: cdb89712: Special driver for handling memory is removed   Alexander Shiyan
• [PATCH v2 08/17] ARM: clps711x: Implement usage "SPARSE_IRQ" kernel option for a platform   Alexander Shiyan
• [PATCH v2 09/17] ARM: clps711x: Implement usage "MULTI_IRQ_HANDLER" kernel option for a platform   Alexander Shiyan
• [PATCH v2 10/17] ARM: clps711x: Add FIQ interrupt handling   Alexander Shiyan
• [PATCH v2 11/17] ARM: clps711x: Unused empty "ACK" calls for IRQ-chips removed   Alexander Shiyan
• [PATCH v2 12/17] ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed   Alexander Shiyan
• [PATCH v2 13/17] ARM: clps711x: Moving power management of framebuffer driver to the board   Alexander Shiyan
• [PATCH v2 14/17] ARM: clps711x: p720t: Special driver for handling NAND memory is removed   Alexander Shiyan
• [PATCH v2 15/17] ARM: clps711x: Rename board files to match functionality   Alexander Shiyan
• [PATCH v2 16/17] ARM: clps711x: Update defconfig due latest changes and new kernel symbols   Alexander Shiyan
• [PATCH v2 17/17] MAINTAINERS: Add ARM CLPS711X entry   Alexander Shiyan
• [PATCH v2 12/17] ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed   Alexander Shiyan
• [PATCH v3 00/18] ARM: Patchset for CLPS711X   Alexander Shiyan
• [PATCH v3 01/18] ARM: clps711x: Using platform_driver for ethernet device   Alexander Shiyan
• [PATCH v3 02/18] ARM: clps711x: p720t: Using "leds-gpio" driver for LED control   Alexander Shiyan
• [PATCH v3 03/18] ARM: clps711x: Transform clps711x-framebuffer to platform driver and use it   Alexander Shiyan
• [PATCH v3 04/18] ARM: clps711x: p720t: Unneeded inclusion of head-sa1100.S removed   Alexander Shiyan
• [PATCH v3 05/18] ARM: clps711x: Always select AUTO_ZRELADDR for a platform   Alexander Shiyan
• [PATCH v3 06/18] ARM: clps711x: cdb89712: Special driver for handling memory is removed   Alexander Shiyan
• [PATCH v3 07/18] ARM: clps711x: Implement usage "SPARSE_IRQ" kernel option for a platform   Alexander Shiyan
• [PATCH v3 08/18] ARM: clps711x: Implement usage "MULTI_IRQ_HANDLER" kernel option for a platform   Alexander Shiyan
• [PATCH v3 09/18] ARM: clps711x: Add FIQ interrupt handling   Alexander Shiyan
• [PATCH v3 10/18] ARM: clps711x: Unused empty "ACK" calls for IRQ-chips removed   Alexander Shiyan
• [PATCH v3 11/18] ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed   Alexander Shiyan
• [PATCH v3 12/18] ARM: clps711x: Moving power management of framebuffer driver to the board   Alexander Shiyan
• [PATCH v3 13/18] ARM: clps711x: p720t: Special driver for handling NAND memory is removed   Alexander Shiyan
• [PATCH v3 14/18] ARM: clps711x: Moving backlight controls of framebuffer driver to the board   Alexander Shiyan
• [PATCH v3 15/18] ARM: clps711x: edb7211: Add support for NOR-Flash   Alexander Shiyan
• [PATCH v3 16/18] ARM: clps711x: Rename board files to match functionality   Alexander Shiyan
• [PATCH v3 17/18] ARM: clps711x: Update defconfig due latest changes and new kernel symbols   Alexander Shiyan
• [PATCH v3 18/18] MAINTAINERS: Add ARM CLPS711X entry   Alexander Shiyan
• [PATCH] Misc: ARM_CHAR_LCD: Permit the use of a driver on any ARM machine   Alexander Shiyan
• [PATCH v2] Misc: ARM_CHAR_LCD: Permit the use of a driver on any ARM machine   Alexander Shiyan
• Re[2]: [PATCH v2] Misc: ARM_CHAR_LCD: Permit the use of a driver on any ARM machine   Alexander Shiyan
• Re[2]: [PATCH v2] Misc: ARM_CHAR_LCD: Permit the use of a driver on any ARM machine   Alexander Shiyan
• Re: [PATCH 10/10] ARM: FIQ: Get rid of init_FIQ()   Alexander Shiyan
• Re[2]: [PATCH 10/10] ARM: FIQ: Get rid of init_FIQ()   Alexander Shiyan
• Re[2]: [PATCH 10/10] ARM: FIQ: Get rid of init_FIQ()   Alexander Shiyan
• [PATCH] ARM: Fix Kconfig symbols typo for LEDS   Alexander Shiyan
• [PATCH] ARM64: Remove incorrect Kconfig symbol HAVE_SPARSE_IRQ   Alexander Shiyan
• [PATCH] ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore   Sergei Shtylyov
• [PATCH] ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore   Sergei Shtylyov
• [PATCH] i2c: at91: fix compilation issue due to header move   Sergei Shtylyov
• [PATCH v4 13/13] ARM: KVM: Add VGIC configuration option   Sergei Shtylyov
• [PATCH v3 1/6] ARM: davinci: Changed pr_warning() to pr_warn() (part 1)   Sergei Shtylyov
• [PATCH v3 2/6] ARM: davinci: Changed pr_warning() to pr_warn() (part 2)   Sergei Shtylyov
• [PATCH] ARM: tegra: Implement 6395/1 for Tegra   Sergei Shtylyov
• [PATCH 9/9] usb: chipidea: udc: configure iso endpoints   Sergei Shtylyov
• [PATCH v3 2/6] ARM: davinci: Changed pr_warning() to pr_warn() (part 2)   Sergei Shtylyov
• [PATCH] Documentation: correct argument list for of_platform_populate correction to match of_platform.h prototype   Sergei Shtylyov
• [PATCH] Dove: Fix irq_to_pmu()   Sergei Shtylyov
• [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource   Sergei Shtylyov
• [PATCH v2 1/2] Fix build error in pwm-vt8500.c   Sergei Shtylyov
• [PATCH] ARM: gic: Fix sparse warning   Sergei Shtylyov
• [PATCH 3/3] net: mvneta: adjust multiline comments to net/ style   Sergei Shtylyov
• [PATCH 3/3] net: mvneta: adjust multiline comments to net/ style   Sergei Shtylyov
• [PATCH] ARM: gic: Fix sparse warning   Sergei Shtylyov
• [PATCH 1/1] asix: use ramdom hw addr if the one read is not valid   Sergei Shtylyov
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support   Sergei Shtylyov
• [PATCHv2 0/7] i2c: omap: updates   Shubhrajyoti
• [PATCHv2 1/7] i2c: omap: Fix the revision register read   Shubhrajyoti
• [PATCHv2 3/7] i2c: omap: remove the dtrev   Shubhrajyoti
• [PATCHv2 3/7] i2c: omap: remove the dtrev   Shubhrajyoti
• [PATCHv3 8/8] i2c: omap: cleanup the sysc write   Shubhrajyoti
• [PATCH] i2c: omap: Move the remove constraint   Shubhrajyoti
• [PATCHv3 0/7] i2c: omap: updates   Shubhrajyoti
• Porting board initialization for fdt   Constantine Shulyupin
• [PATCH] fix compilation error in cm_common.c   Constantine Shulyupin
• [PATCH 17/17] mtd: m25p80: change the m25p80_read to reading page to page   Baruch Siach
• [PATCH 1/1] net: add micrel KSZ8873MLL switch support   Baruch Siach
• [PATCH] gpio: pl061: remove old comment   Baruch Siach
• [RFC][PATCH] printk: add boot_quiet param to support deferred printk while booting   Baruch Siach
• Kernel panic - not syncing: Attempted to kill init!   Baruch Siach
• [PATCH 2/2] pinctrl: mvebu: make pdma clock on dove mandatory   Baruch Siach
• [PATCH] ARM: mx25_3ds: Add camera support   Baruch Siach
• [PATCH] ARM: mx25_3ds: Add camera support   Baruch Siach
• [PATCH] ARM: Fix errata 751472 handling on Cortex-A9 r1p*   Siarhei Siamashka
• [PATCH 2/3] ARM: prima2: Replace include linux/module.h with linux/export.h   Syam Sidhardhan
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Deepak Sikri
• [PATCH] lpc32xx: Add the motor PWM clock   Alexandre Pereira da Silva
• [GIT PULL] arm-soc: Xilinx zynq changes for v3.8   Michal Simek
• [PATCH 1/8] ARM: zynq: move arm-specific sys_timer out of ttc   Michal Simek
• [PATCH 2/8] ARM: zynq: move ttc timer code to drivers/clocksource   Michal Simek
• [PATCH 4/8] ARM: zynq: dts: split up device tree   Michal Simek
• [PATCH 3/8] ARM: zynq: dts: add description of the second uart   Michal Simek
• [PATCH 6/8] serial: xilinx_uartps: kill CONFIG_OF conditional   Michal Simek
• [PATCH 5/8] ARM: zynq: add COMMON_CLK support   Michal Simek
• [PATCH 8/8] clocksource: xilinx_ttc: add OF_CLK support   Michal Simek
• [PATCH v4 1/5] zynq: use GIC device tree bindings   Michal Simek
• [PATCH v3] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.   Michal Simek
• [PATCH] arm: zynq: add system level control register manager   Michal Simek
• [PATCH 2/8] ARM: zynq: move ttc timer code to drivers/clocksource   Michal Simek
• [PATCH v2 2/5] clk: Add support for fundamental zynq clks   Michal Simek
• [PATCH v2 1/5] ARM: zynq: dts: split up device tree   Michal Simek
• [PATCH v2 2/5] clk: Add support for fundamental zynq clks   Michal Simek
• [PATCH v3] clk: Add support for fundamental zynq clks   Michal Simek
• [GIT PULL] arm-soc: Xilinx zynq changes for v3.8   Michal Simek
• [GIT PULL] arm-soc: Xilinx zynq changes for v3.8   Michal Simek
• [PATCH 0/3] ARM: zynq: ARCH_MULTIPLATFORM support   Michal Simek
• [PATCH 1/3] ARM: zynq: remove TTC early mapping   Michal Simek
• [PATCH 2/3] ARM: zynq: make use of debug_ll_io_init()   Michal Simek
• [PATCH 3/3] ARM: zynq: add support for ARCH_MULTIPLATFORM   Michal Simek
• [GIT PULL] arm-soc: Xilinx zynq multiplatform changes for v3.8   Michal Simek
• [GIT PULL] arm-soc: Xilinx zynq multiplatform changes for v3.8   Michal Simek
• [PATCH v2] dmaengine: sirf: enable the driver support new SiRFmarco SoC   Barry Song
• [PATCH 6/6] pinctrl: sirf: enable the driver support new SiRFmarco SoC   Barry Song
• [PATCH] pinctrl: sirf: Staticize non-exported symbol   Barry Song
• [PATCH 3/3] dmaengine: sirf: enable the driver support new SiRFmarco SoC   Barry Song
• [PATCH] DMAEngine: add dmaengine_prep_interleaved_dma wrapper for interleaved api   Barry Song
• [PATCH 2/3] ARM: prima2: Replace include linux/module.h with linux/export.h   Barry Song
• [PATCH 195/493] pinctl: remove use of __devinit   Barry Song
• [PATCH 364/493] pinctrl: remove use of __devinitconst   Barry Song
• [PATCH 055/493] dma: remove use of __devexit_p   Barry Song
• [PATCH 270/493] arm: remove use of __devinit   Barry Song
• [PATCH 207/493] i2c: remove use of __devinit   Barry Song
• [RFC][PATCH] printk: add boot_quiet param to support deferred printk while booting   Barry Song
• [RFC][PATCH] printk: add boot_quiet param to support deferred printk while booting   Barry Song
• [PATCH] ARM: use clockevents_config_and_register() where possible   Barry Song
• [PATCH 1/6] DMA: AT91: Serial: Add parameter for serial dma use   Elen Song
• [question] some question about the residue   Elen Song
• [question] some question about the residue   Elen Song
• [question] some question about the residue   Elen Song
• [question] some question about the residue   Elen Song
• [question] some question about the residue   Elen Song
• [PATCH] ARM: Fix page counting in mem_init and show_mem   Michael Spang
• [PATCH 0/6] drivers: convert struct spinlock to spinlock_t   Arend van Spriel
• [PATCH 0/6] drivers: convert struct spinlock to spinlock_t   Arend van Spriel
• [Xen-devel] BUG: ARM build failures due to Xen   Stefano Stabellini
• [Xen-devel] BUG: ARM build failures due to Xen   Stefano Stabellini
• [PATCH 1/6] arch: Change defconfigs to point to g_mass_storage.   Alan Stern
• [PATCH 159/493] usb: remove use of __devinit   Alan Stern
• [PATCH 06/29] usb: host: ehci-mv: fix clk APIs   Alan Stern
• [PATCH 06/27] usb: host: ehci-mv: fix clk APIs   Alan Stern
• [PATCH] ARM: decompressor: clear SCTLR.A bit for v7 cores   Johannes Stezenbach
• [PATCH] lpc32xx: irq - Set the chain handlers after setting up the IRQ domain   Roland Stigge
• [PATCH RESEND 1/5 v6] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH] lpc32xx: irq - Set the chain handlers after setting up the IRQ domain   Roland Stigge
• [GIT PULL] arm-soc: lpc32xx: platform updates   Roland Stigge
• [PATCH] pwm: lpc32xx - Add a driver for the motor PWM   Roland Stigge
• [PATCH] pwm: lpc32xx - Add a driver for the motor PWM   Roland Stigge
• [PATCH] lpc32xx: Add the motor PWM clock   Roland Stigge
• [GIT PULL] arm-soc: lpc32xx: platform updates   Roland Stigge
• [PATCH 2/2] ARM: LPC32xx: Add the motor PWM to base dts file   Roland Stigge
• [PATCH 1/2] pwm: lpc32xx - Add a driver for the motor PWM   Roland Stigge
• [PATCH 0/6 v7] gpio: Add block GPIO   Roland Stigge
• [PATCH 1/6 v7] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH 2/6 v7] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH 3/6 v7] gpio: Add userland device interface to block GPIO   Roland Stigge
• [PATCH 4/6 v7] gpiolib: Fix default attributes for class   Roland Stigge
• [PATCH 5/6 v7] gpio: Add device tree support to block GPIO API   Roland Stigge
• [PATCH 6/6 v7] gpio: Add block gpio to several gpio drivers   Roland Stigge
• [GIT PULL] arm-soc: lpc32xx: dts update   Roland Stigge
• [GIT PULL] arm-soc: lpc32xx: dts update   Roland Stigge
• [PATCH] ARM: use clockevents_config_and_register() where possible   Roland Stigge
• [PATCH 0/6 v8] gpio: Add block GPIO   Roland Stigge
• [PATCH 1/6 v8] gpio: Add a block GPIO API to gpiolib   Roland Stigge
• [PATCH 2/6 v8] gpio: Add sysfs support to block GPIO API   Roland Stigge
• [PATCH 3/6 v8] gpio: Add userland device interface to block GPIO   Roland Stigge
• [PATCH 4/6 v8] gpiolib: Fix default attributes for class   Roland Stigge
• [PATCH 5/6 v8] gpio: Add device tree support to block GPIO API   Roland Stigge
• [PATCH 6/6 v8] gpio: Add block gpio to several gpio drivers   Roland Stigge
• [PATCH 2/4] arm64: Fix the update_vsyscall() prototype   John Stultz
• [PATCH 02/11] time: convert arch_gettimeoffset to a pointer   John Stultz
• [PATCH V2 2/11] time: convert arch_gettimeoffset to a pointer   John Stultz
• [PATCH V2 3/3] clocksource: time-armada-370-xp converted to clk framework   John Stultz
• [PATCH V4 3/3] clocksource: time-armada-370-xp converted to clk framework   John Stultz
• [PATCH] clocksource: arm_generic: use integer math helpers   John Stultz
• [PATCH v10 0/4] ARM: KDB FIQ debugger   John Stultz
• [RFC PATCH 0/4] ARM: S3C24XX: irq move to drivers and first steps to dt   Heiko Stübner
• [RFC PATCH 1/4] ARM: S3C24XX: move s3c24xx-irq to drivers/irqchip   Heiko Stübner
• [RFC PATCH 2/4] irqchip: s3c24xx: add irq_domains for the interrupt registers   Heiko Stübner
• [RFC PATCH 3/4] ARM: S3C24XX: irq_data conversion for s3c_irqsub_* functions   Heiko Stübner
• [RFC PATCH 4/4] ARM: S3C24XX: First part converting irq code to use hwirq   Heiko Stübner
• [RFC PATCH 1/4] ARM: S3C24XX: move s3c24xx-irq to drivers/irqchip   Heiko Stübner
• [PATCH 00/10] ARM: S3C24XX: rework irq handling for a later dt usage   Heiko Stübner
• [PATCH 01/10] ARM: S3C24XX: transform irq handling into a declarative form   Heiko Stübner
• [PATCH 02/10] ARM: S3C24XX: move irq-pm code into main irq file   Heiko Stübner
• [PATCH 03/10] ARM: S3C24XX: cleanup irq-pm integration   Heiko Stübner
• [PATCH 04/10] ARM: S3C24XX: move s3c2416 irq init to common irq code   Heiko Stübner
• [PATCH 05/10] ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs   Heiko Stübner
• [PATCH 06/10] ARM: S3C24XX: assimilate s3c2416 subirqs into new structure   Heiko Stübner
• [PATCH 07/10] ARM: S3C24XX: assimilate second s3c2416 interrupt into new structure   Heiko Stübner
• [PATCH 08/10] ARM: S3C24XX: move s3c2443 irq code to irq.c   Heiko Stübner
• [PATCH 09/10] ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs   Heiko Stübner
• [PATCH 10/10] ARM: S3C24XX: assimilate s3c2443 subirqs into new structure   Heiko Stübner
• [RFC 0/2] ARM: S3C24XX: Add devicetree support   Heiko Stübner
• [RFC 1/2] ARM: S3C24XX: add devicetree support for interrupts   Heiko Stübner
• [RFC 2/2] ARM: S3C24XX: Add devicetree support and dt-board file for s3c2416 SoCs   Heiko Stübner
• [RFC 1/2] ARM: S3C24XX: add devicetree support for interrupts   Heiko Stübner
• [RFC 1/2] ARM: S3C24XX: add devicetree support for interrupts   Heiko Stübner
• [RFC 1/2] ARM: S3C24XX: add devicetree support for interrupts   Heiko Stübner
• [kvmarm] [PATCH v3 06/14] KVM: ARM: Memory virtualization setup   Sundaram, Senthilkumar
• [RFC] fbdev: arm has __raw I/O accessors, use them in fb.h   H Hartley Sweeten
• [PATCH 9/9] ARM: remove mach .handle_irq for VIC users   H Hartley Sweeten
• [PATCH] ARM: add get_user() support for 8 byte types   Ville Syrjälä
• [PATCH] ARM: add get_user() support for 8 byte types   Ville Syrjälä
• [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Marek Szyprowski
• [PATCH 0/7] ARM: remove init_consistent_dma_size() stub   Marek Szyprowski
• [PATCH 1/7] ARM: omap: remove obsoleted init_consistent_dma_size()   Marek Szyprowski
• [PATCH 2/7] ARM: samsung: remove obsoleted init_consistent_dma_size()   Marek Szyprowski
• [PATCH 3/7] ARM: davinci: remove obsoleted init_consistent_dma_size()   Marek Szyprowski
• [PATCH 4/7] ARM: shmobile: remove obsoleted init_consistent_dma_size()   Marek Szyprowski
• [PATCH 5/7] ARM: at91: remove obsoleted init_consistent_dma_size()   Marek Szyprowski
• [PATCH 6/7] ARM: u300: remove obsoleted init_consistent_dma_size()   Marek Szyprowski
• [PATCH 7/7] ARM: dma-mapping: remove init_consistent_dma_size() stub   Marek Szyprowski
• [PATCH 0/7] ARM: remove init_consistent_dma_size() stub   Marek Szyprowski
• [PATCH V2 3/3] arm: mvebu: Add hardware I/O Coherency support   Marek Szyprowski
• [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Marek Szyprowski
• [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Marek Szyprowski
• [PATCH V3 1/3] arm: dma mapping: Export dma ops functions   Marek Szyprowski
• [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Marek Szyprowski
• [PATCH V3 1/3] arm: dma mapping: Export dma ops functions   Marek Szyprowski
• [PATCH V3 1/3] arm: dma mapping: Export dma ops functions   Marek Szyprowski
• [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Marek Szyprowski
• [PATCH V4 1/3] arm: dma mapping: Export a dma ops function arm_dma_set_mask   Marek Szyprowski
• [PATCH V4 3/3] arm: mvebu: Add hardware I/O Coherency support   Marek Szyprowski
• [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls   Marek Szyprowski
• [PATCH 0/9] dma_debug: add debug_dma_mapping_error support to architectures that support DMA_DEBUG_API   Marek Szyprowski
• [RFC] fbdev: arm has __raw I/O accessors, use them in fb.h   Archit Taneja
• [RFC] fbdev: arm has __raw I/O accessors, use them in fb.h   Archit Taneja
• OMAP4430 produces boot warnings   Archit Taneja
• OMAP4430 produces boot warnings   Archit Taneja
• OMAP4430 produces boot warnings   Archit Taneja
• OMAP4430 produces boot warnings   Archit Taneja
• OMAP4430 produces boot warnings   Archit Taneja
• [PATCH] OMAPDSS: Use only "omapdss_dss" platform device to get context lost count   Archit Taneja
• [PATCH] OMAPDSS: Use only "omapdss_dss" platform device to get context lost count   Archit Taneja
• [PATCH v7] Network driver for the Armada 370 and Armada XP ARM Marvell SoCs   Willy Tarreau
• mtd: nand: mxc: oobfree layout?   Benoît Thébaudeau
• [PATCH v2 5/6] ARM: davinci: remoteproc board support for OMAP-L138 DSP   Tivy, Robert
• [PATCH v3 2/6] ARM: davinci: Changed pr_warning() to pr_warn() (part 2)   Tivy, Robert
• [PATCH v3 5/6] ARM: davinci: remoteproc board support for OMAP-L138 DSP   Tivy, Robert
• [PATCH v3 5/6] ARM: davinci: remoteproc board support for OMAP-L138 DSP   Tivy, Robert
• [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h   Dmitry Torokhov
• [PATCH 0/2] ARM: OMAP: ads7846: fix pendown debounce setting   Dmitry Torokhov
• [RFC/PATCH 0/3] CLK: add more devm_* APIs   Dmitry Torokhov
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Dmitry Torokhov
• [PATCH 2/3] CLK: uninline clk_prepare_enable() and clk_disable_unprepare()   Dmitry Torokhov
• [PATCH 3/3] CLK: add more managed APIs   Dmitry Torokhov
• [RFC/PATCH 0/3] CLK: add more devm_* APIs   Dmitry Torokhov
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Dmitry Torokhov
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Dmitry Torokhov
• [PATCH 0/2] ARM: OMAP: ads7846: fix pendown debounce setting   Dmitry Torokhov
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Dmitry Torokhov
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Dmitry Torokhov
• [PATCH v2 0/3] CLK: add more devm_* APIs   Dmitry Torokhov
• [PATCH v2 1/3] CLK: get rid of HAVE_CLK_PREPARE   Dmitry Torokhov
• [PATCH v2 2/3] CLK: uninline clk_prepare_enable() and clk_disable_unprepare()   Dmitry Torokhov
• [PATCH v2 3/3] CLK: add more managed APIs   Dmitry Torokhov
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Dmitry Torokhov
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Dmitry Torokhov
• [PATCH 0/2] Input: nomadik-ske-keypad - clk fixups   Dmitry Torokhov
• [PATCH] ARM: eukrea_mbimx27-baseboard - use stock get_pendown_state() in ads7846   Dmitry Torokhov
• [PATCH 1/2] input: gpio-keys: Disable hardware on suspend   Dmitry Torokhov
• [PATCH 1/2] input: gpio-keys: Disable hardware on suspend   Dmitry Torokhov
• [Pv-drivers] [PATCH 097/493] scsi: remove use of __devexit_p   Dmitry Torokhov
• [Pv-drivers] [PATCH 192/493] scsi: remove use of __devinit   Dmitry Torokhov
• [PATCH] Input: omap4-keypad: Remove the OMAP4_KBD_SYSCONFIG and OMAP4_KBD_SYSSTATUS   Dmitry Torokhov
• [PATCH v2] ARM: eukrea_mbimx27-baseboard - use stock get_pendown_state() in ads7846   Dmitry Torokhov
• [PATCH 3/3] Input: bu21013_ts - Add support for Device Tree booting   Dmitry Torokhov
• [PATCH 0/6] of: add support for imx-wm8974   Steffen Trumtrar
• [PATCH 1/6] spi: imx: specify spi base for device tree probe   Steffen Trumtrar
• [PATCH 2/6] spi/devicetree: find spi_device via device_node   Steffen Trumtrar
• [PATCH 3/6] ASoC: wm8974: include MCLKDIV in pll_factors   Steffen Trumtrar
• [PATCH 4/6] ASoC: wm8974: add SPI as a possible bus master   Steffen Trumtrar
• [PATCH 5/6] ARM i.MX: rename ssi1 clock for imx27   Steffen Trumtrar
• [PATCH 6/6] ASoC: fsl: add imx-wm8974 machine driver   Steffen Trumtrar
• [PATCH 4/6] ASoC: wm8974: add SPI as a possible bus master   Steffen Trumtrar
• [PATCH 6/6] ASoC: fsl: add imx-wm8974 machine driver   Steffen Trumtrar
• [PATCH 1/6] spi: imx: specify spi base for device tree probe   Steffen Trumtrar
• [PATCH -next] CLK: clk-twl6040: fix return value check in twl6040_clk_probe()   Mike Turquette
• [PATCH v2 00/26] Move OMAP2+ over to common clk framework   Mike Turquette
• [PATCH v2 00/26] Move OMAP2+ over to common clk framework   Mike Turquette
• [PATCH 14/26] ARM: OMAP3: clock: Add 3xxx data using common struct clk   Mike Turquette
• [PATCH] ARM: OMAP2+: clockdomain: disabling unused clks   Mike Turquette
• [PATCH 14/26] ARM: OMAP3: clock: Add 3xxx data using common struct clk   Mike Turquette
• [PATCH] ARM: OMAP2+: clockdomain: disabling unused clks   Mike Turquette
• [PATCH] ARM: OMAP2+: clockdomain: disabling unused clks   Mike Turquette
• [PATCH 15/26] ARM: omap2: clock: Add 24xx data using common struct clk   Mike Turquette
• [PATCH v2 00/26] Move OMAP2+ over to common clk framework   Mike Turquette
• [PATCH 15/26] ARM: omap2: clock: Add 24xx data using common struct clk   Mike Turquette
• [PATCH] CLK: vt8500: Fix SDMMC clk special cases   Mike Turquette
• [PATCH 0/5] clk: ux500: Add clock lookups for u8500   Mike Turquette
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Mike Turquette
• [PATCH V4 0/3] Add clock framework for armada 370/XP   Mike Turquette
• [PATCH 0/2] clk: ux500: Add some more clk lookups for u8500   Mike Turquette
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Mike Turquette
• common clk fixes for 3.7-rc6   Mike Turquette
• [PATCH 0/5] clk: ux500: Add clock lookups for u8500   Mike Turquette
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Mike Turquette
• [PATCH] clk: spear: Add stub functions for spear3[0|1|2]0_clk_init()   Mike Turquette
• possibility of parent clock selection through DT   Mike Turquette
• [PATCH] ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections   Mike Turquette
• [PATCH v3] clk: Add support for fundamental zynq clks   Mike Turquette
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Mike Turquette
• common clk fixes for 3.7-rc6, part 2   Mike Turquette
• [PATCH] Remove inline from clock framework function definitions to build the kernel with GCC 4.7   Mike Turquette
• [PATCH 1/7] clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs   Mike Turquette
• [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT   Mike Turquette
• [PATCH] clk: move IM-PD1 clocks to drivers/clk   Mike Turquette
• [PATCH v2] clk: move IM-PD1 clocks to drivers/clk   Mike Turquette
• [PATCH 1/3] clk: add GPLv2 headers to the Versatile clock files   Mike Turquette
• [PATCH 2/3 v3] clk: make ICST driver handle the VCO registers   Mike Turquette
• [PATCH 3/3 v3] clk: move IM-PD1 clocks to drivers/clk   Mike Turquette
• [PATCH 0/8] CLK: SPEAr: Fixes & updates   Mike Turquette
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Mike Turquette
• [GIT PULL v3] core, cpu and gated clocks for mvebu   Mike Turquette
• [PATCH 050/493] clk: remove use of __devexit_p   Mike Turquette
• [PATCH 223/493] clk: remove use of __devinit   Mike Turquette
• [PATCH 394/493] clk: remove use of __devexit   Mike Turquette
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Mike Turquette
• [PATCH 1/3] CLK: uninline clk_prepare() and clk_unprepare()   Mike Turquette
• [PATCH 1/2] clk: ux500: Initial support for abx500 clock driver   Mike Turquette
• [PATCH] ARM : CLK: Fix clock multiplexers when registered before their parents.   Mike Turquette
• [PATCH v4 00/12] clk: exynos4: migrate to common clock framework   Mike Turquette
• [PATCH] Don't mark shared helper functions as inline   Mike Turquette
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Mike Turquette
• [PATCH v4 00/12] clk: exynos4: migrate to common clock framework   Mike Turquette
• [PATCH 2/6 v5] clk, highbank: Prevent glitches in non-bypass reset mode   Mike Turquette
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Mike Turquette
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Mike Turquette
• [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq   Mike Turquette
• [PATCH linux-next] ARM: OMAP2: Fix compillation error in cm_common   Peter Ujfalusi
• [PATCH] ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER   Peter Ujfalusi
• [PATCH] ARM: OMAP: board-4430sdp: Proper support for TWL6030 PWM LED/Backlight   Peter Ujfalusi
• OMAP* Latest build failures   Peter Ujfalusi
• [PATCH] ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER   Peter Ujfalusi
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Peter Ujfalusi
• [RFC] dmaengine: omap-dma: Allow DMA controller to prefetch data   Peter Ujfalusi
• [PATCH] fix compilation error in cm_common.c   Peter Ujfalusi
• [PATCH] ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER   Peter Ujfalusi
• [PATCH 2/5] ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support   Peter Ujfalusi
• [PATCH 1/1] ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio   Peter Ujfalusi
• [PATCH v2 1/2] ARM: OMAP: hwmod: Add possibility to count hwmod resources based on type   Péter Ujfalusi
• Where CONFIG_DRAM_BASE/CONFIG_DRAM_SIZE defined?   Greg Ungerer
• [PATCH 02/11] time: convert arch_gettimeoffset to a pointer   Geert Uytterhoeven
• [PATCH 03/11] m68k: set arch_gettimeoffset directly   Geert Uytterhoeven
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Rajanikanth H V
• OMAP* Latest build failures   Eduardo Valentin
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Tomi Valkeinen
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Tomi Valkeinen
• [PATCH 0/6] OMAPDSS: enable DSS for Panda & SDP with devtree   Tomi Valkeinen
• [PATCH 1/6] ARM/dts: omap4-panda: Add pinmux configuration for HDMI   Tomi Valkeinen
• [PATCH 2/6] ARM/dts: omap4-sdp: Add pinmux configuration for HDMI   Tomi Valkeinen
• [PATCH 3/6] OMAPDSS: HACK: look for regulators with omap4 names   Tomi Valkeinen
• [PATCH 4/6] OMAP: panda: move display init from board file to dss-common.c   Tomi Valkeinen
• [PATCH 5/6] OMAP: omap4sdp: move display init from board file to dss-common.c   Tomi Valkeinen
• [PATCH 6/6] OMAP: board-generic: enable DSS for panda & sdp boards   Tomi Valkeinen
• [PATCH 1/6] ARM/dts: omap4-panda: Add pinmux configuration for HDMI   Tomi Valkeinen
• [PATCH 3/3] ARM: OMAP: Remove plat-omap/common.c   Tomi Valkeinen
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tomi Valkeinen
• [PATCH 1/5] OMAP: FB: use DMA_BIT_MASK() for fb's coherent_dma_mask   Tomi Valkeinen
• [PATCH 2/5] OMAPFB: use dma_alloc_attrs to allocate memory   Tomi Valkeinen
• [PATCH 3/5] OMAP: RX51: remove use of vram   Tomi Valkeinen
• [PATCH 4/5] OMAP: common.c: remove init call to vram   Tomi Valkeinen
• [PATCH 5/5] OMAP: remove vram allocator   Tomi Valkeinen
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tomi Valkeinen
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tomi Valkeinen
• [PATCH 1/6] ARM/dts: omap4-panda: Add pinmux configuration for HDMI   Tomi Valkeinen
• OMAP* Latest build failures   Tomi Valkeinen
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tomi Valkeinen
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tomi Valkeinen
• [RFC] fbdev: arm has __raw I/O accessors, use them in fb.h   Tomi Valkeinen
• [PATCH] OMAP: board-files: fix i2c_bus for tfp410   Tomi Valkeinen
• [PATCH] OMAP: board-files: fix i2c_bus for tfp410   Tomi Valkeinen
• tfp410 and i2c_bus_num   Tomi Valkeinen
• tfp410 and i2c_bus_num   Tomi Valkeinen
• [RFC] fbdev: arm has __raw I/O accessors, use them in fb.h   Tomi Valkeinen
• [RFC] fbdev: arm has __raw I/O accessors, use them in fb.h   Tomi Valkeinen
• tfp410 and i2c_bus_num   Tomi Valkeinen
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tomi Valkeinen
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• tfp410 and i2c_bus_num   Tomi Valkeinen
• OMAP4430 produces boot warnings   Tomi Valkeinen
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Tomi Valkeinen
• OMAP4430 produces boot warnings   Tomi Valkeinen
• OMAP build now completely broken in latest arm-soc   Tomi Valkeinen
• OMAP4430 produces boot warnings   Tomi Valkeinen
• OMAP4430 produces boot warnings   Tomi Valkeinen
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCH] video: da8xx-fb: clk_get on connection id fck   Tomi Valkeinen
• [PATCH] OMAPDSS: Use only "omapdss_dss" platform device to get context lost count   Tomi Valkeinen
• [PATCH] i2c: mxs: remove broken PIOQUEUE support   Marek Vasut
• [PATCH] i2c: mxs: remove broken PIOQUEUE support   Marek Vasut
• usb clock not found on imx27 when using dt   Marek Vasut
• [PATCH] ARM: mxs: Add SchulerControl SPS1 DTS file   Marek Vasut
• [PATCH V3 0/5] Avoid passing clks through platform data   Padma Venkat
• [PATCH V3] ASoC: SAMSUNG: Add DT support for i2s   Padma Venkat
• [PATCH V3 1/2] ARM: dts: Add nodes for i2s controllers for Samsung Exynos5 platforms   Padma Venkat
• [PATCH V3 2/2] ARM: EXYNOS: Enable platform support for I2S controllers   Padma Venkat
• [PATCH V3 1/5] ARM: S3C64XX: Add I2S clkdev support   Padma Venkat
• [PATCH V3 2/5] ARM: S5PC100: Add I2S clkdev support   Padma Venkat
• [PATCH V3 3/5] ARM: S5P64x0: Add I2S clkdev support   Padma Venkat
• [PATCH V3 4/5] ARM: S5PV210: Avoid passing the clks through platform data   Padma Venkat
• [PATCH V3 5/5] ARM: Exynos: Avoid passing the clks through platform data   Padma Venkat
• [PATCH V3] ARM: EXYNOS5: Add clocks for EXYNOS5 Audio Subsystem.   Padma Venkat
• [PATCH V3] ARM: SAMSUNG: Delete the unnecessary variable   Padma Venkat
• [PATCH V3 0/2] ARM: Exynos: Enable I2S platform support for Exynos5   Padma Venkat
• [PATCH V3] ARM: EXYNOS5: Add I2S SFR base addresse   Padma Venkat
• [PATCH V3] ASoC: Samsung: Update Kconfig for I2S, SPDIF and PCM audio   Padma Venkat
• [RFC PATCH] ASoC: Samsung: Register the audio dma platform device   Padma Venkat
• [RFC PATCH] ASoC: Samsung: Register the audio platform device   Padma Venkat
• [RFC PATCH] ASoC: Samsung: Register the audio platform device   Padma Venkat
• [PATCH] ARM: SAMSUNG: Fix build of I2S driver   Padma Venkat
• [GIT PULL] ASoC: Samsung: Updates for v3.8   Padma Venkat
• [PATCH V3] ARM: EXYNOS5: Add I2S SFR base addresse   Padmavathi Venna
• [PATCH V3] ARM: EXYNOS5: Add clocks for EXYNOS5 Audio Subsystem.   Padmavathi Venna
• [PATCH V3] ASoC: SAMSUNG: Add DT support for i2s   Padmavathi Venna
• [PATCH V3 0/2] ARM: Exynos: Enable I2S platform support for Exynos5   Padmavathi Venna
• [PATCH V3 1/2] ARM: dts: Add nodes for i2s controllers for Samsung Exynos5 platforms   Padmavathi Venna
• [PATCH V3 2/2] ARM: EXYNOS: Enable platform support for I2S controllers   Padmavathi Venna
• [PATCH V3 0/5] Avoid passing clks through platform data   Padmavathi Venna
• [PATCH V3 1/5] ARM: S3C64XX: Add I2S clkdev support   Padmavathi Venna
• [PATCH V3 2/5] ARM: S5PC100: Add I2S clkdev support   Padmavathi Venna
• [PATCH V3 3/5] ARM: S5P64x0: Add I2S clkdev support   Padmavathi Venna
• [PATCH V3 4/5] ARM: S5PV210: Avoid passing the clks through platform data   Padmavathi Venna
• [PATCH V3 5/5] ARM: Exynos: Avoid passing the clks through platform data   Padmavathi Venna
• [PATCH V3] ARM: SAMSUNG: Delete the unnecessary variable   Padmavathi Venna
• [PATCH V3] ASoC: Samsung: Update Kconfig for I2S,SPDIF and PCM audio   Padmavathi Venna
• [RFC PATCH] ASoC: Samsung: Register the audio dma platform device   Padmavathi Venna
• [RFC PATCH] ASoC: Samsung: Register the audio platform device   Padmavathi Venna
• [PATCH V4 0/2] Add DT support for i2s   Padmavathi Venna
• [PATCH V4 1/2] ASoC: Samsung: Get I2S src_clk from clock alias id.   Padmavathi Venna
• [PATCH V4 2/2] ASoC: SAMSUNG: Add DT support for i2s   Padmavathi Venna
• [PATCH 2/6] i915: convert struct spinlock to spinlock_t   Daniel Vetter
• [RFC 3/3] ARM/AVR32: get rid of serial_at91.h   Andrew Victor
• [PATCH 8/9] ARM: support uprobe handling   Rabin Vincent
• [RFC 1/2] clk: use struct clk only for external API   Rabin Vincent
• [RFC 2/2] clk: per-user clock accounting for debug   Rabin Vincent
• [RFC 1/2] clk: use struct clk only for external API   Rabin Vincent
• [PATCH] nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6   Armando Visconti
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Anton Vorontsov
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Anton Vorontsov
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Anton Vorontsov
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Anton Vorontsov
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Anton Vorontsov
• [PATCH v2 0/3] GPIO driver to turn power off   Anton Vorontsov
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Anton Vorontsov
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Anton Vorontsov
• [PATCH 0/4] Implement device tree support for ab8500 BM Devices   Anton Vorontsov
• [PATCH 0/4] Implement device tree support for ab8500 BM Devices   Anton Vorontsov
• [PATCH v3 1/3] power: Add simple poweroff-gpio driver   Anton Vorontsov
• [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge   Anton Vorontsov
• [PATCH resend 0/4] ARM: KDB FIQ debugger   Anton Vorontsov
• [PATCH resend 0/10] Get rid of FIQ_START/enable/disable_fiq() + some FIQ cleanups   Anton Vorontsov
• [PATCH 1/4] ARM: Move some macros from entry-armv to entry-header   Anton Vorontsov
• [PATCH 2/4] ARM: Add KGDB/KDB FIQ debugger generic code   Anton Vorontsov
• [PATCH 3/4] ARM: VIC: Add a couple of low-level FIQ management helpers   Anton Vorontsov
• [PATCH 4/4] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Anton Vorontsov
• [PATCH 01/10] ARM: mach-rpc: Don't register FIQs with genirq   Anton Vorontsov
• [PATCH 02/10] ARM: plat-s3c24xx: Don't use FIQ_START   Anton Vorontsov
• [PATCH 03/10] [media] mx1_camera: Don't use {en,dis}able_fiq() calls   Anton Vorontsov
• [PATCH 04/10] ASoC: imx: Don't use {en,dis}able_fiq() calls   Anton Vorontsov
• [PATCH 05/10] ARM: FIQ: Remove enable_fiq() and disable_fiq() calls   Anton Vorontsov
• [PATCH 06/10] ARM: FIQ: Remove FIQ_START   Anton Vorontsov
• [PATCH 07/10] ARM: FIQ: Should include asm/mach/irq.h   Anton Vorontsov
• [PATCH 08/10] ARM: FIQ: Implement !CONFIG_FIQ stubs   Anton Vorontsov
• [PATCH 09/10] ARM: FIQ: Make show_fiq_list() return void   Anton Vorontsov
• [PATCH 10/10] ARM: FIQ: Get rid of init_FIQ()   Anton Vorontsov
• [PATCH 10/10] ARM: FIQ: Get rid of init_FIQ()   Anton Vorontsov
• [PATCH 10/10] ARM: FIQ: Get rid of init_FIQ()   Anton Vorontsov
• [PATCH 10/10] ARM: FIQ: Get rid of init_FIQ()   Anton Vorontsov
• [PATCH] ARM: use clockevents_config_and_register() where possible   Anton Vorontsov
• [PATCH 10/10] ARM: FIQ: Get rid of init_FIQ()   Anton Vorontsov
• [PATCH] i2c: at91: add a sanity check on i2c message length   Voss, Nikolaus
• [PATCH V2 0/3] ARM: dts: omap5: EMIF and LPDDR2 device tree data   Lokesh Vutla
• [PATCH V2 0/3] ARM: dts: omap5: EMIF and LPDDR2 device tree data   Lokesh Vutla
• [PATCH V3 0/3] ARM: dts: omap5: EMIF and LPDDR2 device tree data   Lokesh Vutla
• [PATCH V3 1/3] ARM: dts: omap5-evm: Fix size of memory defined for EVM   Lokesh Vutla
• [PATCH V3 2/3] ARM: dts: omap5: EMIF device tree data for OMAP5 boards   Lokesh Vutla
• [PATCH V3 3/3] ARM: dts: omap5-evm: LPDDR2 memory device details for EVM   Lokesh Vutla
• [PATCH] drivers: bus: omap_interconnect: Fix rand-config build warning   Lokesh Vutla
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• Fwd: [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCH] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Linus Walleij
• Fwd: [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCH] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Linus Walleij
• [PATCH v2] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Linus Walleij
• [GIT PULL] Integrator & Versatile IRQchip changes   Linus Walleij
• [PATCH v2] leds: leds-gpio: adopt pinctrl support   Linus Walleij
• [PATCH 1/2] Input: nomadik-ske-keypad - fixup use of clk   Linus Walleij
• [PATCH 2/2] Input: nomadik-ske-keypad - start using the apb_pclk   Linus Walleij
• [GIT PULL] kill plat-nomadik and convert Nomadik+Ux500 to SPARSE_IRQ   Linus Walleij
• [PATCH 0/9] Pinctrl: SPEAr: Fixes for 3.7-rc3   Linus Walleij
• [PATCH 0/9] Pinctrl: SPEAr: Fixes for 3.7-rc3   Linus Walleij
• [PATCH 6/7] pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC   Linus Walleij
• [PATCH 0/2] clk: ux500: Add some more clk lookups for u8500   Linus Walleij
• [PATCH 6/6] pinctrl: sirf: enable the driver support new SiRFmarco SoC   Linus Walleij
• [PATCH] pinctrl: nomadik: Add terminating entry for platform_device_id table   Linus Walleij
• [PATCH 2/2] Input: nomadik-ske-keypad - start using the apb_pclk   Linus Walleij
• [PATCH] pinctrl: at91: Staticize non-exported symbols   Linus Walleij
• [PATCH V2 RESEND 2/5] gpiolib: provide provision for gpiolib to register pin range   Linus Walleij
• [PATCH V2 1/5] Revert "pinctrl: remove pinctrl_remove_gpio_range"   Linus Walleij
• [PATCH V2 3/5] pinctrl: SPEAr: Add plgpio driver   Linus Walleij
• [PATCH V2 4/5] pinctrl: SPEAr: Add gpio ranges support   Linus Walleij
• [PATCH V2 4/5] pinctrl: SPEAr: Add gpio ranges support   Linus Walleij
• [PATCH 0/2] clk: ux500: Add some more clk lookups for u8500   Linus Walleij
• [PATCH 6/8] mfd/ab8500-core: use irq_domain_add_simple()   Linus Walleij
• [PATCH] pinctrl: sirf: Staticize non-exported symbol   Linus Walleij
• [PATCH v2 1/2] mailbox: OMAP: introduce mailbox framework   Linus Walleij
• [PATCH 0/9] Ux500 pinctrl table updates   Linus Walleij
• [PATCH 1/9] ARM: ux500: 8500: register LCD VSI pinctrl table   Linus Walleij
• [PATCH 2/9] ARM: ux500: 8500: add IDLE pin configuration for SPI   Linus Walleij
• [PATCH 3/9] ARM: ux500: delete duplicate macro   Linus Walleij
• [PATCH 4/9] ARM: ux500: 8500: update SKE keypad pinctrl table   Linus Walleij
• [PATCH 5/9] ARM: ux500: 8500: define SDI sleep states   Linus Walleij
• [PATCH 6/9] ARM: ux500: cosmetic fixups for uart0   Linus Walleij
• [PATCH 7/9] ARM: ux500: 8500: add pinctrl support for uart1 and uart2   Linus Walleij
• [PATCH 8/9] ARM: ux500: add STM pin configuration   Linus Walleij
• [PATCH 9/9] ARM: ux500: fixup magnetometer pins   Linus Walleij
• [PATCH] ARM: dts: add missing ux500 device trees   Linus Walleij
• [PATCH v3 9/9] pinctrl: single: dump pinmux register value   Linus Walleij
• [PATCH 1/5] gpiolib: fix up function prototypes etc   Linus Walleij
• [PATCH 2/5] gpiolib-of: staticize the pin range calls   Linus Walleij
• [PATCH 3/5] gpiolib: remove duplicate pin range code   Linus Walleij
• [PATCH 4/5] gpiolib: call pin removal in chip removal function   Linus Walleij
• [PATCH 5/5] gpiolib: separation of pin concerns   Linus Walleij
• [PATCH] gpiolib: iron out include ladder mistakes   Linus Walleij
• [PATCH 6/7] ARM: u300: remove obsoleted init_consistent_dma_size()   Linus Walleij
• [GIT PULL] Ux500 pin changes   Linus Walleij
• [PATCH 1/2] ARM: ux500: add PRCM register base for pinctrl   Linus Walleij
• [PATCH 2/2] pinctrl/nomadik: make independent of prcmu driver   Linus Walleij
• [PATCH 1/5] gpiolib: fix up function prototypes etc   Linus Walleij
• [PATCH 3/5] gpiolib: remove duplicate pin range code   Linus Walleij
• [PATCH] gpiolib: iron out include ladder mistakes   Linus Walleij
• [PATCH v2] gpiolib: iron out include ladder mistakes   Linus Walleij
• [PATCH] ARM: VIC: remove unused irq_base variable   Linus Walleij
• [PATCH 2/4] gpio: samsung: Skip registration if pinctrl driver is present on Exynos4x12   Linus Walleij
• linux-next: manual merge of the arm-soc tree with the pinctrl tree   Linus Walleij
• [PATCH 2/2] pinctrl/nomadik: make independent of prcmu driver   Linus Walleij
• [PATCH v2] pinctrl/nomadik: make independent of prcmu driver   Linus Walleij
• [PATCH] pinctrl/nomadik: db8540: fix moduartstmmux_oc4_1 pin group definition.   Linus Walleij
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Linus Walleij
• [PATCHv2] Input: omap4-keypad: Add pinctrl support   Linus Walleij
• [PATCH V2 4/5] pinctrl: SPEAr: Add gpio ranges support   Linus Walleij
• [PATCH V2 5/5] ARM: SPEAr: Add plgpio node in device tree dtsi files   Linus Walleij
• [PATCH] pinctrl: SPEAr: Add SoC specific gpio configuration routines   Linus Walleij
• [PATCH 2/4] gpio: samsung: Skip registration if pinctrl driver is present on Exynos4x12   Linus Walleij
• [PATCH v2] pinctrl/nomadik: make independent of prcmu driver   Linus Walleij
• [PATCH 0/5] clk: ux500: Add clock lookups for u8500   Linus Walleij
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Linus Walleij
• [PATCH 0/6] ARM: integrator: SoC bus & cleanup   Linus Walleij
• [PATCH 1/6] ARM: integrator: hook the AP into the SoC bus   Linus Walleij
• [PATCH 2/6] ARM: integrator: hook the CP into the SoC bus   Linus Walleij
• [PATCH 3/6] ARM: integrator: remove static AP syscon mapping   Linus Walleij
• [PATCH 4/6] ARM: integrator: remove static CP syscon mapping   Linus Walleij
• [PATCH 5/6] ARM: integrator: delete SC mapping on the CP   Linus Walleij
• [PATCH 6/6] ARM: integrator: delete static UART1 mapping   Linus Walleij
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Linus Walleij
• [PATCH v4 2/9] pinctrl: single: support gpio request and free   Linus Walleij
• [PATCH v4 9/9] pinctrl: single: dump pinmux register value   Linus Walleij
• [PATCH v4 1/9] ARM: mmp: select pinctrl driver   Linus Walleij
• [PATCH 02/14] ARM: SPEAr13xx: DT: Add spics gpio controller nodes   Linus Walleij
• [PATCH] ARM: select PINCTRL for ARCH_MMP   Linus Walleij
• [PATCH] pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910   Linus Walleij
• [PATCH 1/2] pinctrl/nomadik: db8500: split clkout group   Linus Walleij
• [PATCH 2/2] pinctrl/nomadik: db8540: split clkout group   Linus Walleij
• [PATCH 2/6] pinctrl: Update clock handling for the pinctrl-nomadik GPIO driver   Linus Walleij
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Linus Walleij
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Linus Walleij
• [PATCH] ARM: ux500: fix pin warning   Linus Walleij
• [GIT PULL] Ux500 pin changes   Linus Walleij
• Build failure: OMAP4430 failed due to exynos4 pinctrl   Linus Walleij
• [PATCH v2 1/3] power: Add simple poweroff-gpio driver   Linus Walleij
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Linus Walleij
• [PATCH] mmc: Standardise capability type   Linus Walleij
• [PATCH 0/2] clk: ux500: Make mtu driver use apb_pclock   Linus Walleij
• [PATCH 1/2] clk: ux500: Register mtu apb_pclocks   Linus Walleij
• [PATCH 2/2] clocksource/mtu-nomadik: use apb_pclk   Linus Walleij
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Linus Walleij
• [PATCH 02/14] ARM: SPEAr13xx: DT: Add spics gpio controller nodes   Linus Walleij
• [PATCH v4 9/9] pinctrl: single: dump pinmux register value   Linus Walleij
• [PATCH 01/14] pinctrl: SPEAr: add spi chipselect control driver   Linus Walleij
• [PATCH 4/4] pinctrl: nomadik: Prevent NULL dereference if of_match_device returns NULL   Linus Walleij
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Linus Walleij
• [PATCH 02/14] ARM: SPEAr13xx: DT: Add spics gpio controller nodes   Linus Walleij
• [PATCH 1/1] ARM: ux500: Describe UART platform registering issues more accurately   Linus Walleij
• [PATCH 1/2] Boottime: A tool for automatic measurement of kernel/bootloader boot time   Linus Walleij
• [PATCH] pinctrl: nomadik: Staticize non-exported symbols   Linus Walleij
• [PATCH 01/14] pinctrl: SPEAr: add spi chipselect control driver   Linus Walleij
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Linus Walleij
• [GIT PULL] MTU clock fixes   Linus Walleij
• [GIT PULL] Integrator SoC bus patches   Linus Walleij
• [PATCH] ARM: integrator: push down SC dependencies   Linus Walleij
• [PATCH] ARM: integrator: use BUG_ON where possible   Linus Walleij
• [GIT PULL] Integrator SoC bus patches   Linus Walleij
• [GIT PULL] Integrator SoC bus patches   Linus Walleij
• [PATCH 1/3] gpio: pca953x: Register an IRQ domain   Linus Walleij
• [PATCH 2/3] gpio: pca953x: Add compatible strings to gpio-pca953x driver   Linus Walleij
• [PATCH 3/3] ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree   Linus Walleij
• [PATCH 01/16] gpio: SPEAr: add spi chipselect control driver   Linus Walleij
• [PATCH v3 00/18] ARM: Patchset for CLPS711X   Linus Walleij
• [PATCH v2 2/5] ARM: gic: remove direct use of gic_raise_softirq   Linus Walleij
• [PATCH] clk: move IM-PD1 clocks to drivers/clk   Linus Walleij
• [PATCH] gpiolib: let gpiochip_add_pin_range() specify offset   Linus Walleij
• [PATCH] gpiolib: let gpiochip_add_pin_range() specify offset   Linus Walleij
• [PATCH 1/7 v2] gpiolib: let gpiochip_add_pin_range() specify offset   Linus Walleij
• [PATCH 2/7] gpiolib: rename find_pinctrl_*   Linus Walleij
• [PATCH 3/7] pinctrl: make range registration defer properly   Linus Walleij
• [PATCH 4/7] gpiolib: return any error code from range creation   Linus Walleij
• [PATCH 5/7] pinctrl: add function to retrieve range from pin   Linus Walleij
• [PATCH 6/7] pinctrl/u300/coh901: let the gpio_chip register the range   Linus Walleij
• [PATCH 7/7] pinctrl/u300/coh901: stop spawning pinctrl from GPIO   Linus Walleij
• [PATCH v5 04/10] pinctrl: generic: add input schmitt disable parameter   Linus Walleij
• [PATCH v5 02/10] pinctrl: single: support gpio request and free   Linus Walleij
• [GIT PULL] at91: fixes for 3.7-rc7   Linus Walleij
• [PATCH] clk: move IM-PD1 clocks to drivers/clk   Linus Walleij
• [PATCH v2] clk: move IM-PD1 clocks to drivers/clk   Linus Walleij
• [PATCH] clk: add GPLv2 headers to the Versatile clock files   Linus Walleij
• [PATCH v2] clk: move IM-PD1 clocks to drivers/clk   Linus Walleij
• [PATCH 1/3] clk: add GPLv2 headers to the Versatile clock files   Linus Walleij
• [PATCH 2/3] clk: make ICST driver handle the VCO registers   Linus Walleij
• [PATCH 3/3 v3] clk: move IM-PD1 clocks to drivers/clk   Linus Walleij
• [PATCH 2/3 v2] clk: make ICST driver handle the VCO registers   Linus Walleij
• [PATCH 2/3 v3] clk: make ICST driver handle the VCO registers   Linus Walleij
• [PATCH 140/493] rtc: remove use of __devexit_p   Linus Walleij
• [PATCH 1/2] ARM: ux500: Disable the MMCI gpio-regulator by default   Linus Walleij
• [PATCH 2/2] ARM: ux500: Move board specific GPIO info out to subordinate DTS files   Linus Walleij
• [PATCH 075/493] mfd: remove use of __devexit_p   Linus Walleij
• [PATCH 412/493] mfd: remove use of __devexit   Linus Walleij
• [PATCH 064/493] hwspinlock: remove use of __devexit_p   Linus Walleij
• [PATCH 253/493] hwspinlock: remove use of __devinit   Linus Walleij
• [PATCH 312/493] mfd: remove use of __devinitdata   Linus Walleij
• [PATCH 403/493] hwspinlock: remove use of __devexit   Linus Walleij
• [PATCH] gpiolib: fix bug and clarify OF use of ranges   Linus Walleij
• [PATCH] gpiolib: let gpiochip_add_pin_range() specify offset   Linus Walleij
• [PATCH] gpiolib: rename pin range arguments   Linus Walleij
• [PATCH 4/7] gpiolib: return any error code from range creation   Linus Walleij
• [PATCH] gpiolib: fix bug and clarify OF use of ranges   Linus Walleij
• [PATCH] gpiolib: fix bug and clarify OF use of ranges   Linus Walleij
• [PATCH V3 08/11] ARM: ux500: convert timer suspend/resume to clock_event_device   Linus Walleij
• [PATCH V3 10/11] ARM: remove struct sys_timer suspend and resume fields   Linus Walleij
• [PATCH V3 10/11] ARM: remove struct sys_timer suspend and resume fields   Linus Walleij
• [PATCH v3 00/18] ARM: Patchset for CLPS711X   Linus Walleij
• [PULL pinctrl-for 3.8] at91 update   Linus Walleij
• [PATCH 0/4] Dove pinctrl fixes and DT enabling   Linus Walleij
• [PATCH 1/4] pinctrl: mvebu: fix iomem pointer for dove pinctrl   Linus Walleij
• [PATCH 2/4] pinctrl: mvebu: Fix dove_audio1_ctrl_set function   Linus Walleij
• [PATCH 318/493] pinctrl: remove use of __devinitdata   Linus Walleij
• [PATCH 364/493] pinctrl: remove use of __devinitconst   Linus Walleij
• [PATCH 417/493] pinctrl: remove use of __devexit   Linus Walleij
• [PATCH 138/493] pinctrl: remove use of __devexit_p   Linus Walleij
• [PATCH 195/493] pinctl: remove use of __devinit   Linus Walleij
• [For 3.8 PATCH 0/5] pinctrl-at91: add missing mux + gpio name + fix   Linus Walleij
• [PATCH 16/16] ARM: plat-versatile: move FPGA irq driver to drivers/irqchip   Linus Walleij
• [PATCH 15/16] irqchip: vic: mark vic_of_init() as static   Linus Walleij
• [PATCH 15/16] irqchip: vic: mark vic_of_init() as static   Linus Walleij
• [PATCH 0/2] gpio: dt: add gpio-export support   Linus Walleij
• [PATCH 0/4] Dove pinctrl fixes and DT enabling   Linus Walleij
• [PATCHv9 1/3] Runtime Interpreted Power Sequences   Linus Walleij
• [GIT PULL] GPIO patch stack for v3.8   Linus Walleij
• [PATCH 00/14] ARM: SPEAr: DT updates   Linus Walleij
• [PATCH 0/2] clk: ux500: Add abx500 clock driver   Linus Walleij
• [PATCH 0/4] Dove pinctrl fixes and DT enabling   Linus Walleij
• [PATCH] gpio: pl061: remove old comment   Linus Walleij
• [GIT PULL] Integrator SoC bus patches   Linus Walleij
• [GIT PULL] Integrator changes for v3.8   Linus Walleij
• [PATCH 9/9] ARM: remove mach .handle_irq for VIC users   Linus Walleij
• [PATCH 1/1] ARM: ux500: Rename dbx500 cpufreq code to be more generic   Linus Walleij
• [PATCH V3 10/11] ARM: remove struct sys_timer suspend and resume fields   Linus Walleij
• [PATCH] clk: ux500: assume PRCC clocks are off by default   Linus Walleij
• [PATCH] clk: ux500: assume PRCC clocks are off by default   Linus Walleij
• [PATCH] clk: ux500: assume PRCC clocks are off by default   Linus Walleij
• [PATCH] clk: ux500: fix bit error   Linus Walleij
• [PATCH] mfd: ab8500-core: Fix invalid free of devm_ allocated data   Linus Walleij
• [PATCH 4/8] watchdog: sp805_wdt depends on ARM   Linus Walleij
• [PATCH 3/8 v3] pl080.h: moved from arm/include/asm/hardware to include/linux/amba/   Linus Walleij
• [PATCH 5/8] mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep   Linus Walleij
• [PATCH] irq: versatile: delete dangling variable   Linus Walleij
• New warnings (irqchip move)   Linus Walleij
• [PATCH 1/2] amba: create a resource parent registrator   Linus Walleij
• [PATCH 2/2] ARM: integrator: pass the lm resource to amba   Linus Walleij
• [PATCH 05/13] ARM: OMAP2+: PRCM: create SoC-specific chip restart functions   Paul Walmsley
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Paul Walmsley
• OMAP baseline test results for v3.7-rc3   Paul Walmsley
• OMAP baseline test results for v3.7-rc4   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• OMAP baseline test results for v3.7-rc1   Paul Walmsley
• [PATCH] Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints"   Paul Walmsley
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Paul Walmsley
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Paul Walmsley
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Paul Walmsley
• OMAP baseline test results for v3.7-rc4   Paul Walmsley
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Paul Walmsley
• [PATCHv9 0/8] ARM: OMAP4: core retention support   Paul Walmsley
• [PATCH 05/13] ARM: OMAP2+: PRCM: create SoC-specific chip restart functions   Paul Walmsley
• [PATCH v2 00/26] Move OMAP2+ over to common clk framework   Paul Walmsley
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Paul Walmsley
• [GIT PULL] ARM: OMAP: second set of PRCM cleanups for 3.8   Paul Walmsley
• [PATCH 14/26] ARM: OMAP3: clock: Add 3xxx data using common struct clk   Paul Walmsley
• [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER   Paul Walmsley
• [PATCH 5/7] ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer   Paul Walmsley
• [PATCH 14/26] ARM: OMAP3: clock: Add 3xxx data using common struct clk   Paul Walmsley
• [PATCH 08/13] ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions   Paul Walmsley
• [PATCH 14/26] ARM: OMAP3: clock: Add 3xxx data using common struct clk   Paul Walmsley
• [PATCH 14/26] ARM: OMAP3: clock: Add 3xxx data using common struct clk   Paul Walmsley
• [PATCH 14/26] ARM: OMAP3: clock: Add 3xxx data using common struct clk   Paul Walmsley
• [PATCH] ARM: OMAP2+: clockdomain: disabling unused clks   Paul Walmsley
• [GIT PULL v2] ARM: OMAP: second set of PRCM cleanups for 3.8   Paul Walmsley
• [PATCH v3 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod   Paul Walmsley
• [PATCH] ARM: OMAP2+: clockdomain: disabling unused clks   Paul Walmsley
• [PATCH] ARM: OMAP2+: clockdomain: disabling unused clks   Paul Walmsley
• [PATCH] ARM: OMAP2+: clockdomain: disabling unused clks   Paul Walmsley
• [PATCH 15/26] ARM: omap2: clock: Add 24xx data using common struct clk   Paul Walmsley
• [PATCH] ARM: OMAP2+: clockdomain: disabling unused clks   Paul Walmsley
• [PATCH v2 00/26] Move OMAP2+ over to common clk framework   Paul Walmsley
• [PATCH 15/26] ARM: omap2: clock: Add 24xx data using common struct clk   Paul Walmsley
• [PATCH v2 00/26] Move OMAP2+ over to common clk framework   Paul Walmsley
• OMAP baseline test results for v3.7-rc4   Paul Walmsley
• [PATCH linux-next] ARM: OMAP2: Fix compillation error in cm_common   Paul Walmsley
• OMAP baseline test results for v3.7-rc5   Paul Walmsley
• [PATCH] ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections   Paul Walmsley
• [PATCH 15/26] ARM: omap2: clock: Add 24xx data using common struct clk   Paul Walmsley
• [PATCH 02/26] ARM: OMAP: hwmod: Fix up hwmod based clkdm accesses   Paul Walmsley
• [PATCH 07/26] ARM: OMAP: clock: list all clk_hw_omap clks to enable/disable autoidle   Paul Walmsley
• [PATCH 08/26] ARM: OMAP: clock: Define a function to enable clocks at init   Paul Walmsley
• [PATCH 12/26] ARM: OMAP4: clock: Add 44xx data using common struct clk   Paul Walmsley
• [PATCH 12/26] ARM: OMAP4: clock: Add 44xx data using common struct clk   Paul Walmsley
• [PATCH 03/26] ARM: OMAP4: clock: Convert to common clk   Paul Walmsley
• OMAP baseline test results for v3.7-rc3   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: clock: convert to common clock framework   Paul Walmsley
• [PATCH] ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks   Paul Walmsley
• [PATCH] Remove inline from clock framework function definitions to build the kernel with GCC 4.7   Paul Walmsley
• [PATCH] Remove inline from clock framework function definitions to build the kernel with GCC 4.7   Paul Walmsley
• OMAP baseline test results for v3.7-rc6   Paul Walmsley
• [PATCHv9 1/8] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Paul Walmsley
• [PATCH v2 1/2] ARM: OMAP: hwmod: Add possibility to count hwmod resources based on type   Paul Walmsley
• [PATCH v2 2/2] ARM: OMAP: omap_device: Correct resource handling for DT boot   Paul Walmsley
• [PATCH] ARM: OMAP2+: PRM: initialize some PRM functions early   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod/PRM changes for 3.8   Paul Walmsley
• [PATCH v5 5/5] ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks   Paul Walmsley
• [PATCH 0/6] ARM: OMAP2+: some PM fixes and cleanup for 3.9   Paul Walmsley
• [PATCH 1/6] ARM: OMAP2xxx: powerdomain: core powerdomain missing logic retention states   Paul Walmsley
• [PATCH 2/6] ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values   Paul Walmsley
• [PATCH 3/6] ARM: OMAP3xxx: CPUIdle: simplify the PER next-state code   Paul Walmsley
• [PATCH 4/6] ARM: OMAP3xxx: CPUIdle: optimize __omap3_enter_idle()   Paul Walmsley
• [PATCH 5/6] ARM: OMAP4: MPUSS PM: remove unnecessary shim functions for powerdomain control   Paul Walmsley
• [PATCH 6/6] ARM: OMAP2+: powerdomain: fix powerdomain trace integration   Paul Walmsley
• [PATCH 1/1] net: cpts: fix for build break after ARM SoC integration   Paul Walmsley
• OMAP baseline test results for v3.7-rc7   Paul Walmsley
• [PATCH 1/3] ARM: OMAP4: Update timer clock aliases   Paul Walmsley
• [PATCH 0/3] ARM: OMAP4: Clock fixes   Paul Walmsley
• [PATCH 1/3] ARM: OMAP4: Update timer clock aliases (fwd)   Paul Walmsley
• [PATCH v5 00/12] Support for AM33xx PWM Subsystem   Paul Walmsley
• [PATCH V3 5/5] arm: mvebu: Added SMP support for Armada XP   Hui Wang
• [PATCH V3 5/5] arm: mvebu: Added SMP support for Armada XP   Hui Wang
• [PATCH V3 0/5] SMP support for Armada XP   Hui Wang
• [PATCH V3 0/5] SMP support for Armada XP   Hui Wang
• [PATCH 2/2] mmc/host/s3cmci: remove the excess "goto irq_out"   Jing Wang
• [GIT PULL] ARM: tegra: fixes for 3.7-rc4   Stephen Warren
• [PATCH v3 5/9] document: devicetree: bind pinconf with pin-single   Stephen Warren
• [PATCH] irqchip: irq-bcm2835: Add terminating entry for of_device_id table   Stephen Warren
• [PATCH V4 REPOST] ARM: implement debug_ll_io_init()   Stephen Warren
• [PATCH V3 1/5] ARM: implement debug_ll_io_init()   Stephen Warren
• [PATCH v2 1/2] mailbox: OMAP: introduce mailbox framework   Stephen Warren
• [PATCH 5/5] gpiolib: separation of pin concerns   Stephen Warren
• [PATCH] gpiolib: iron out include ladder mistakes   Stephen Warren
• vexpress issues in next-20121029   Stephen Warren
• struct sys_timer .suspend/.resume ignored for ARCH_SA1100/ARCH_PXA?   Stephen Warren
• struct sys_timer .suspend/.resume ignored for ARCH_SA1100/ARCH_PXA?   Stephen Warren
• [PATCH 2/2] pinctrl/nomadik: make independent of prcmu driver   Stephen Warren
• [RFC PATCH 00/11] arch_gettimeoffset and ARM timer rework   Stephen Warren
• [PATCH] ARM: delete struct sys_timer   Stephen Warren
• [PATCH 01/11] cris: move usec/nsec conversion to do_slow_gettimeoffset   Stephen Warren
• [PATCH 02/11] time: convert arch_gettimeoffset to a pointer   Stephen Warren
• [PATCH 03/11] m68k: set arch_gettimeoffset directly   Stephen Warren
• [PATCH 04/11] ARM: set arch_gettimeoffset directly   Stephen Warren
• [PATCH 05/11] ARM: at91: convert timer suspend/resume to clock_event_device   Stephen Warren
• [PATCH 06/11] ARM: pxa: convert timer suspend/resume to clock_event_device   Stephen Warren
• [PATCH 07/11] ARM: sa1100: convert timer suspend/resume to clock_event_device   Stephen Warren
• [PATCH 08/11] ARM: ux500: convert timer suspend/resume to clock_event_device   Stephen Warren
• [PATCH 09/11] ARM: samsung: register syscore_ops for timer resume directly   Stephen Warren
• [PATCH 10/11] ARM: remove struct sys_timer suspend and resume fields   Stephen Warren
• [RFC PATCH 11/11] ARM: delete struct sys_timer   Stephen Warren
• [PATCH] ARM: delete struct sys_timer   Stephen Warren
• [PATCH 1/2] arm: bcm2835: move to the multiplatform support   Stephen Warren
• S-o-b for 48efdd2 "Add a pm_power_off function that resets us, ..."   Stephen Warren
• [PATCH] Add support for generic BCM SoC chipsets   Stephen Warren
• [PATCH v2] pinctrl/nomadik: make independent of prcmu driver   Stephen Warren
• [PATCH V2 11/11] ARM: delete struct sys_timer   Stephen Warren
• [PATCH 04/11] ARM: set arch_gettimeoffset directly   Stephen Warren
• [PATCH] ARM: tegra: retain L2 content over CPU suspend/resume   Stephen Warren
• [PATCH] ARM: tegra: enable data prefetch on L2   Stephen Warren
• [PATCH] Add support for generic BCM SoC chipsets   Stephen Warren
• [PATCH v2] Add support for generic BCM SoC chipsets   Stephen Warren
• S-o-b for 48efdd2 "Add a pm_power_off function that resets us, ..."   Stephen Warren
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Stephen Warren
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Stephen Warren
• [PATCH] ARM: tegra: enable data prefetch on L2   Stephen Warren
• [PATCH] ARM: tegra: retain L2 content over CPU suspend/resume   Stephen Warren
• [RFC PATCH 1/4] ARM: S3C24XX: move s3c24xx-irq to drivers/irqchip   Stephen Warren
• [PATCH v2] Add support for generic BCM SoC chipsets   Stephen Warren
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Stephen Warren
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Stephen Warren
• [PATCH v4 5/9] document: devicetree: bind pinconf with pin-single   Stephen Warren
• [PATCH V2 2/11] time: convert arch_gettimeoffset to a pointer   Stephen Warren
• [PATCH v2] Add support for generic BCM SoC chipsets   Stephen Warren
• [PATCH V2 2/11] time: convert arch_gettimeoffset to a pointer   Stephen Warren
• [PATCH V2] ARM: tegra: retain L2 content over CPU suspend/resume   Stephen Warren
• [PATCH 1/3] ARM: tegra: dts: add sflash controller dt entry   Stephen Warren
• [PATCH 2/3] ARM: tegra: Add OF_DEV_AUXDATA for sflash driver in board dt   Stephen Warren
• [PATCH 3/3] ARM: config: tegra: enable SFLASH controller driver   Stephen Warren
• [PATCH] ARM: tegra: trimslice: enable SPI flash   Stephen Warren
• [PATCH] ARM: tegra: trimslice: enable SPI flash   Stephen Warren
• [PATCH] ARM: tegra: Implement 6395/1 for Tegra   Stephen Warren
• [PATCH 1/3] gpio: Add simple poweroff-gpio driver   Stephen Warren
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Stephen Warren
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Stephen Warren
• [PATCH V2 0/3] ARM: tegra: add speedo identification for T20/T30   Stephen Warren
• [PATCH 1/2] ARM: tegra: harmony: enable HDMI port   Stephen Warren
• [PATCH 2/2] ARM: tegra: trimslice: enable HDMI port   Stephen Warren
• [PATCH] RFC: pinctrl: grab default handler with bus notifiers   Stephen Warren
• [PATCH 1/2] ARM: tegra: harmony: enable HDMI port   Stephen Warren
• [PATCH 0/3] ARM: tegra: Enable HDMI on Tamonten carriers   Stephen Warren
• [PATCH] ARM: dt: tegra: cardhu: Add drm components   Stephen Warren
• [PATCH] ARM: tegra: whistler: enable HDMI port   Stephen Warren
• [PATCH] ARM: tegra: whistler: enable HDMI port   Stephen Warren
• [PATCH] ARM: tegra: seaboard: enable internal LCD   Stephen Warren
• [GIT PULL 1/6] ARM: tegra: cleanup for 3.8   Stephen Warren
• [GIT PULL 2/6] ARM: tegra: core SoC code enhancements   Stephen Warren
• [GIT PULL 3/6] ARM: tegra: cpuidle enhancements   Stephen Warren
• [GIT PULL 4/6] ARM: tegra: device tree changes   Stephen Warren
• [GIT PULL 5/6] ARM: tegra: single-zImage preparation work   Stephen Warren
• [GIT PULL 6/6] ARM: tegra: defconfig update   Stephen Warren
• [GIT PULL 1/3] ARM: bcm2835: cleanup   Stephen Warren
• [GIT PULL 2/3] ARM: bcm2835: core SoC enhancements   Stephen Warren
• [GIT PULL 3/3] ARM: bcm2835: defconfig updates   Stephen Warren
• [PATCH V3] Add support for generic BCM SoC chipsets   Stephen Warren
• [PATCH V3] Add support for generic BCM SoC chipsets   Stephen Warren
• [PATCH v3 1/3] power: Add simple poweroff-gpio driver   Stephen Warren
• [PATCH V5] Add support for generic BCM SoC chipsets   Stephen Warren
• [PATCH V3 00/11] ARM: delete struct sys_timer   Stephen Warren
• [PATCH V3 01/11] cris: move usec/nsec conversion to do_slow_gettimeoffset   Stephen Warren
• [PATCH V3 02/11] time: convert arch_gettimeoffset to a pointer   Stephen Warren
• [PATCH V3 03/11] m68k: set arch_gettimeoffset directly   Stephen Warren
• [PATCH V3 04/11] ARM: set arch_gettimeoffset directly   Stephen Warren
• [PATCH V3 05/11] ARM: at91: convert timer suspend/resume to clock_event_device   Stephen Warren
• [PATCH V3 06/11] ARM: pxa: convert timer suspend/resume to clock_event_device   Stephen Warren
• [PATCH V3 07/11] ARM: sa1100: convert timer suspend/resume to clock_event_device   Stephen Warren
• [PATCH V3 08/11] ARM: ux500: convert timer suspend/resume to clock_event_device   Stephen Warren
• [PATCH V3 09/11] ARM: samsung: register syscore_ops for timer resume directly   Stephen Warren
• [PATCH V3 10/11] ARM: remove struct sys_timer suspend and resume fields   Stephen Warren
• [PATCH V3 11/11] ARM: delete struct sys_timer   Stephen Warren
• [PATCH] mfd: vexpress-sysreg: Remove LEDs code   Stephen Warren
• [PATCH 1/2] ARM: dts: support pinctrl single in aspenite   Stephen Warren
• [PATCH 2/2] ARM: mmp: support pinctrl single in brownstone   Stephen Warren
• [PATCH 1/2] of: Add vendor prefix for Asahi Kasei Corp.   Stephen Warren
• [PATCH 2/2] ARM: tegra: seaboard: add missing DT vendor prefixes   Stephen Warren
• [PATCH V2 1/2] clocksource: add common of_clksrc_init() function   Stephen Warren
• [PATCH V2 2/2] ARM: tegra: move timer.c to drivers/clocksource/   Stephen Warren
• [PATCH 2/2] ARM: mmp: support pinctrl single in brownstone   Stephen Warren
• [PATCH v3 1/3] power: Add simple poweroff-gpio driver   Stephen Warren
• [PATCH] gpiolib: let gpiochip_add_pin_range() specify offset   Stephen Warren
• [PATCH 4/7] gpiolib: return any error code from range creation   Stephen Warren
• [PATCH 1/7 v2] gpiolib: let gpiochip_add_pin_range() specify offset   Stephen Warren
• [PATCH V2 2/2] ARM: tegra: move timer.c to drivers/clocksource/   Stephen Warren
• [PATCH V3 1/2] clocksource: add common of_clksrc_init() function   Stephen Warren
• [PATCH V3 2/2] ARM: tegra: move timer.c to drivers/clocksource/   Stephen Warren
• [PATCH V3 1/2] clocksource: add common of_clksrc_init() function   Stephen Warren
• [PATCH V3 1/2] clocksource: add common of_clksrc_init() function   Stephen Warren
• [PATCH v3 1/3] power: Add simple poweroff-gpio driver   Stephen Warren
• [PATCH 01/16] irqchip: add basic infrastructure   Stephen Warren
• [PATCH V4 1/3] of: introduce for_each_matching_node_and_match()   Stephen Warren
• [PATCH V4 2/3] clocksource: add common of_clksrc_init() function   Stephen Warren
• [PATCH V4 3/3] ARM: tegra: move timer.c to drivers/clocksource/   Stephen Warren
• [PATCH v3 1/3] power: Add simple poweroff-gpio driver   Stephen Warren
• [PATCH] gpiolib: rename pin range arguments   Stephen Warren
• [PATCH v5 07/10] document: devicetree: bind pinconf with pin single   Stephen Warren
• [PATCH V3 11/11] ARM: delete struct sys_timer   Stephen Warren
• [PATCH V3 10/11] ARM: remove struct sys_timer suspend and resume fields   Stephen Warren
• [PATCH 1/1] arm: tegra: select correct parent clk for pll_p   Stephen Warren
• [PATCH 1/1] arm: tegra: fix comment in dsib clk set_parent   Stephen Warren
• [PATCH] ARM: use clockevents_config_and_register() where possible   Stephen Warren
• [PATCH V2] ARM: dt: tegra: cardhu: Add drm components   Stephen Warren
• [PATCH] mfd: vexpress-sysreg: Remove LEDs code   Stephen Warren
• [PATCH V7 1/7] kbuild: centralize .dts->.dtb rule   Stephen Warren
• [PATCH V7 2/7] ARM: dt: change .dtb build rules to build in dts directory   Stephen Warren
• [PATCH V7 3/7] arm64: use new common dtc rule   Stephen Warren
• [PATCH 1/1] ARM: tegra: bus_notifier registers IOMMU devices(was: How to specify IOMMU'able devices in DT)   Stephen Warren
• [PATCH 2/2] ARM: tegra: moving stuff away from mach/clk.h   Stephen Warren
• [PATCH] ARM: dt: tegra: cardhu: Add drm components   Stephen Warren
• [PATCH V7 1/7] kbuild: centralize .dts->.dtb rule   Stephen Warren
• [PATCH] arm: mvebu: support for the PlatHome OpenBlocks AX3 board   Mio Watanabe
• [PATCH 1/4] OF: Add helper for matching against linux, stdout-path   Lothar Waßmann
• [BUGFIX PATCH] video: mxsfb: fix crash when unblanking the display   Lothar Waßmann
• [PATCH] video: mxsfb: fix typo: 'FAILING' instead of 'FALLING'   Lothar Waßmann
• [BUGFIX PATCH] video: mxsfb: fix crash when unblanking the display   Lothar Waßmann
• [PATCH] video: mxsfb: fix typo: 'FAILING' instead of 'FALLING'   Lothar Waßmann
• [PATCH] ARM: OMAP3: Devkit8000: Add DDC i2c_bus_num   Thomas Weber
• [PATCH] ARM: OMAP3: Devkit8000: Fix dvi output   Thomas Weber
• [Xen-devel] BUG: ARM build failures due to Xen   Konrad Rzeszutek Wilk
• drivers/staging/ced1401/ced_ioc.c:918 GetTransfer() error: potential null dereference 'tx'. (kzalloc returns null)   Fengguang Wu
• [PATCH 2/9] ARM: at91: Remove unused struct at91sam9g45_isi_device and its resources   Josh Wu
• [PATCH] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Josh Wu
• [PATCH] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Josh Wu
• [PATCH] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Josh Wu
• [PATCH v2] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Josh Wu
• [PATCH v2] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()   Josh Wu
• Kernel uncompression error   Woody Wu
• ttySAC0 or ttyS0 in 3.6.x ARM Linux?   Woody Wu
• Kernel uncompression error   Woody Wu
• ttySAC0 or ttyS0 in 3.6.x ARM Linux?   Woody Wu
• Incorrect RAM memory size   Woody Wu
• s3c2410 (Linux 2.6.36) Incorrect DRAM size   Woody Wu
• s3c2410 (Linux 2.6.36) Incorrect DRAM size   Woody Wu
• Kernel uncompression error   Woody Wu
• Where CONFIG_DRAM_BASE/CONFIG_DRAM_SIZE defined?   Woody Wu
• Where CONFIG_DRAM_BASE/CONFIG_DRAM_SIZE defined?   Woody Wu
• Kernel panic - not syncing: Attempted to kill init!   Woody Wu
• The Ethernet driver doesn't get probed   Woody Wu
• Kernel panic - not syncing: Attempted to kill init!   Woody Wu
• Kernel panic - not syncing: Attempted to kill init!   Woody Wu
• nfs root not responding?   Woody Wu
• nfs root not responding?   Woody Wu
• nfs root not responding?   Woody Wu
• [PATCH] cpufreq: exynos: Broadcast frequency change notifications for all cores   Rafael J. Wysocki
• [PATCH] cpufreq: exynos: Broadcast frequency change notifications for all cores   Rafael J. Wysocki
• [PATCH] cpuidle: add Calxeda SOC idle support   Rafael J. Wysocki
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Rafael J. Wysocki
• [PATCH] cpuidle: add Calxeda SOC idle support   Rafael J. Wysocki
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Rafael J. Wysocki
• [PATCH] cpufreq: SPEAr: Add CPUFreq driver   Rafael J. Wysocki
• [PATCH 0/6 v5] cpufreq: add support for Calxeda ECX-1000 (highbank)   Rafael J. Wysocki
• [PATCH] fixup! cpufreq: SPEAr: Add CPUFreq driver   Rafael J. Wysocki
• [PATCH 01/29] usb: gadget: mv_udc: use udc_start and udc_stop functions   Chao Xie
• [PATCH 02/29] usb: gadget: mv_udc: use devm_xxx for probe   Chao Xie
• [PATCH 03/29] usb: gadget: mv_udc: fix the clk APIs   Chao Xie
• [PATCH 04/29] usb: otg: mv_otg: use devm_xxx for probe   Chao Xie
• [PATCH 05/29] usb: otg: mv_otg: fix the clk APIs   Chao Xie
• [PATCH 06/29] usb: host: ehci-mv: fix clk APIs   Chao Xie
• [PATCH 07/29] usb: host: ehci-mv: remove unused variable   Chao Xie
• [PATCH 08/29] usb: gadget: mv_udc: fix the value of tranceiver   Chao Xie
• [PATCH 09/29] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [PATCH 10/29] usb: gadget: mv_udc: use PHY driver for udc   Chao Xie
• [PATCH 11/29] usb: ehci: ehci-mv: use PHY driver for ehci   Chao Xie
• [PATCH 12/29] usb: otg: mv_otg: use PHY driver for otg   Chao Xie
• [PATCH 13/29] arm: mmp2: change the defintion of usb devices   Chao Xie
• [PATCH 14/29] arm: pxa910: change the defintion of usb devices   Chao Xie
• [PATCH 15/29] arm: brownstone: add usb support for the board   Chao Xie
• [PATCH 16/29] arm: ttc_dkb: add usb support   Chao Xie
• [PATCH 17/29] arm: mmp: remove the usb phy setting   Chao Xie
• [PATCH 18/29] arm: mmp: remove usb devices from pxa168   Chao Xie
• [PATCH 19/29] usb: phy: mv_usb2_phy: add externel chip support   Chao Xie
• [PATCH 20/29] usb: gadget: mv_udc: add extern chip support   Chao Xie
• [PATCH 21/29] usb: ehci: ehci-mv: add extern chip support   Chao Xie
• [PATCH 22/29] usb: otg: mv_otg: add extern chip support   Chao Xie
• [PATCH 23/29] arm: mmp: add extern chip support for brownstone   Chao Xie
• [PATCH 24/29] arm: mmp: add extern chip support for ttc_dkb   Chao Xie
• [PATCH 25/29] usb: gadget: mv_udc: add device tree support   Chao Xie
• [PATCH 26/29] usb: otg: mv_otg: add device tree support   Chao Xie
• [PATCH 27/29] usb: ehci: ehci-mv: add device tree support   Chao Xie
• [PATCH 28/29] arm: mmp: devicetree: add usb support for mmp2   Chao Xie
• [PATCH 29/29] arm: mmp: devicetree: add usb support for pxa910_dkb   Chao Xie
• [PATCH 00/27] mv-usb fix and enhancement patches   Chao Xie
• [PATCH 01/27] usb: gadget: mv_udc: use udc_start and udc_stop functions   Chao Xie
• [PATCH 02/27] usb: gadget: mv_udc: use devm_xxx for probe   Chao Xie
• [PATCH 03/27] usb: gadget: mv_udc: fix the clk APIs   Chao Xie
• [PATCH 04/27] usb: otg: mv_otg: use devm_xxx for probe   Chao Xie
• [PATCH 05/27] usb: otg: mv_otg: fix the clk APIs   Chao Xie
• [PATCH 06/27] usb: host: ehci-mv: fix clk APIs   Chao Xie
• [PATCH 07/27] usb: host: ehci-mv: remove unused variable   Chao Xie
• [PATCH 08/27] usb: gadget: mv_udc: fix the value of tranceiver   Chao Xie
• [PATCH 09/27] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [PATCH 10/27] usb: gadget: mv_udc: use PHY driver for udc   Chao Xie
• [PATCH 11/27] usb: ehci: ehci-mv: use PHY driver for ehci   Chao Xie
• [PATCH 12/27] usb: otg: mv_otg: use PHY driver for otg   Chao Xie
• [PATCH 13/27] arm: mmp2: change the defintion of usb devices   Chao Xie
• [PATCH 14/27] arm: pxa910: change the defintion of usb devices   Chao Xie
• [PATCH 15/27] arm: brownstone: add usb support for the board   Chao Xie
• [PATCH 16/27] arm: ttc_dkb: add usb support   Chao Xie
• [PATCH 17/27] arm: mmp: remove the usb phy setting   Chao Xie
• [PATCH 18/27] arm: mmp: remove usb devices from pxa168   Chao Xie
• [PATCH 19/27] usb: phy: mv_usb2_phy: add externel chip support   Chao Xie
• [PATCH 20/27] usb: gadget: mv_udc: add extern chip support   Chao Xie
• [PATCH 21/27] usb: ehci: ehci-mv: add extern chip support   Chao Xie
• [PATCH 22/27] usb: otg: mv_otg: add extern chip support   Chao Xie
• [PATCH 23/27] arm: mmp: add extern chip support for brownstone   Chao Xie
• [PATCH 24/27] arm: mmp: add extern chip support for ttc_dkb   Chao Xie
• [PATCH 25/27] usb: gadget: mv_udc: add device tree support   Chao Xie
• [PATCH 26/27] usb: otg: mv_otg: add device tree support   Chao Xie
• [PATCH 27/27] usb: ehci: ehci-mv: add device tree support   Chao Xie
• [PATCH 01/27] usb: gadget: mv_udc: use udc_start and udc_stop functions   Chao Xie
• [V2 PATCH 00/27] mv-usb fix and enhancement patches   Chao Xie
• [V2 PATCH 01/27] usb: gadget: mv_udc: use udc_start and udc_stop functions   Chao Xie
• [V2 PATCH 02/27] usb: gadget: mv_udc: use devm_xxx for probe   Chao Xie
• [V2 PATCH 03/27] usb: gadget: mv_udc: fix the clk APIs   Chao Xie
• [V2 PATCH 04/27] usb: otg: mv_otg: use devm_xxx for probe   Chao Xie
• [V2 PATCH 05/27] usb: otg: mv_otg: fix the clk APIs   Chao Xie
• [V2 PATCH 06/27] usb: host: ehci-mv: fix clk APIs   Chao Xie
• [V2 PATCH 07/27] usb: host: ehci-mv: remove unused variable   Chao Xie
• [V2 PATCH 08/27] usb: gadget: mv_udc: fix the value of tranceiver   Chao Xie
• [V2 PATCH 09/27] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [V2 PATCH 10/27] usb: gadget: mv_udc: use PHY driver for udc   Chao Xie
• [V2 PATCH 11/27] usb: ehci: ehci-mv: use PHY driver for ehci   Chao Xie
• [V2 PATCH 12/27] usb: otg: mv_otg: use PHY driver for otg   Chao Xie
• [V2 PATCH 13/27] arm: mmp2: change the defintion of usb devices   Chao Xie
• [V2 PATCH 14/27] arm: pxa910: change the defintion of usb devices   Chao Xie
• [V2 PATCH 15/27] arm: brownstone: add usb support for the board   Chao Xie
• [V2 PATCH 16/27] arm: ttc_dkb: add usb support   Chao Xie
• [V2 PATCH 17/27] arm: mmp: remove the usb phy setting   Chao Xie
• [V2 PATCH 18/27] arm: mmp: remove usb devices from pxa168   Chao Xie
• [V2 PATCH 19/27] usb: phy: mv_usb2_phy: add externel chip support   Chao Xie
• [V2 PATCH 20/27] usb: gadget: mv_udc: add extern chip support   Chao Xie
• [V2 PATCH 21/27] usb: ehci: ehci-mv: add extern chip support   Chao Xie
• [V2 PATCH 22/27] usb: otg: mv_otg: add extern chip support   Chao Xie
• [V2 PATCH 23/27] arm: mmp: add extern chip support for brownstone   Chao Xie
• [V2 PATCH 24/27] arm: mmp: add extern chip support for ttc_dkb   Chao Xie
• [V2 PATCH 25/27] usb: gadget: mv_udc: add device tree support   Chao Xie
• [V2 PATCH 26/27] usb: otg: mv_otg: add device tree support   Chao Xie
• [V2 PATCH 27/27] usb: ehci: ehci-mv: add device tree support   Chao Xie
• [PATCH 1/4] rtc: sa1100: enable/disable rtc when probe/remove the device   Chao Xie
• [PATCH 2/4] rtc: pxa: fix rtc caculation issue   Chao Xie
• [PATCH 3/4] rtc: pxa: add pxa95x rtc support   Chao Xie
• [PATCH 4/4] rtc: pxa: request rtc irqs when probe/remove the device   Chao Xie
• [PATCH] ARM: Fix the "WFI" instruction opcode definition.   Fei Yang
• [PATCH 00/17] atmel SoC SPI controller with dmaengine and DT   Wenyou Yang
• [PATCH 01/17] of: add dma-mask binding   Wenyou Yang
• [PATCH 02/17] of_spi: add generic binding support to specify cs gpio   Wenyou Yang
• [PATCH 03/17] spi/atmel_spi: add physical base address   Wenyou Yang
• [PATCH 04/17] spi/atmel_spi: call unmapping on transfers buffers   Wenyou Yang
• [PATCH 05/17] spi/atmel_spi: status information passed through controller data   Wenyou Yang
• [PATCH 06/17] spi/atmel_spi: add flag to controller data for lock operations   Wenyou Yang
• [PATCH 07/17] spi/atmel_spi: add dmaengine support   Wenyou Yang
• [PATCH 08/17] spi/atmel_spi: Fix spi-atmel driver to adapt to slave_config changes   Wenyou Yang
• [PATCH 09/17] spi/atmel_spi: correct 16 bits transfers using PIO   Wenyou Yang
• [PATCH 10/17] spi/atmel_spi: correct 16 bits transfer with DMA   Wenyou Yang
• [PATCH 11/17] spi/atmel_spi: add DT support   Wenyou Yang
• [PATCH 12/17] spi/atmel_spi: add version propety as the spi data   Wenyou Yang
• [PATCH 13/17] spi/atmel_spi: add function to read the spi data from the dts   Wenyou Yang
• [PATCH 14/17] ARM: at91: add clocks for spi DT entries   Wenyou Yang
• [PATCH 15/17] ARM: dts: add spi nodes for atmel SoC   Wenyou Yang
• [PATCH 16/17] ARM: dts: add spi nodes for atmel boards   Wenyou Yang
• [PATCH 17/17] mtd: m25p80: change the m25p80_read to reading page to page   Wenyou Yang
• [PATCH 00/11] watchdog/at91sam9_wdt: use watchdog framework, support DT   Wenyou Yang
• [PATCH 01/11] watchdog/at91sam9_wdt: remove the file_operations struct   Wenyou Yang
• [PATCH 02/11] watchdog/at91sam9_wdt: change the at91wdt_private struct to the at91wdt_drvdata struct   Wenyou Yang
• [PATCH 03/11] watchdog/at91sam9_wdt: change the wdt_read and wdt_write macro to the inline function   Wenyou Yang
• [PATCH 04/11] watchdog/at91sam9_wdt: change "at91_wdt_settimeout" function name to "at91wdt_enable"   Wenyou Yang
• [PATCH 05/11] watchdog/at91sam9_wdt: add to use the watchdog framework   Wenyou Yang
• [PATCH 06/11] watchdog/at91sam9_wdt: change the timer function name   Wenyou Yang
• [PATCH 07/11] watchdog/at91sam9_wdt: add nowayout helpers to Watchdog Timer Driver Kernel API   Wenyou Yang
• [PATCH 08/11] watchdog/at91sam9_wdt: use module_platform_driver()   Wenyou Yang
• [PATCH 09/11] watchdog/at91sam9_wdt: add support to device tree   Wenyou Yang
• [PATCH 10/11] watchdog/at91sam9_wdt: using dev_info replaces pr_info, dev_crit repalces pr_crit   Wenyou Yang
• [PATCH 11/11] ARM: dts: add the watchdog nodes for atmel SoC   Wenyou Yang
• [PATCH 17/17] mtd: m25p80: change the m25p80_read to reading page to page   Yang, Wenyou
• [alsa-devel] [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Yegor Yefremov
• [PATCH 1/1] ARM: dts: imx6q-sabresd: add volume up/down gpio keys   Liu Ying
• [PATCH 437/493] char: remove use of __devexit   Kent Yoder
• [PATCH -next] CLK: clk-twl6040: fix return value check in twl6040_clk_probe()   Wei Yongjun
• [PATCH -next] ARM: OMAP2+: remove duplicated include from board-overo.c   Wei Yongjun
• [PATCH -next] mmc: wmt-sdmmc: fix potential NULL pointer dereference in wmt_mci_probe()   Wei Yongjun
• [PATCH -next] ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c   Wei Yongjun
• [RFC] ARM: mx5: Replace clk_register_clkdev with clock DT lookup   Philipp Zabel
• [PATCH] ARM: dt: tegra: cardhu: Add drm components   Mark Zhang
• [PATCH V2] ARM: dt: tegra: cardhu: Add drm components   Mark Zhang
• [PATCH V2] ARM: dt: tegra: cardhu: Add drm components   Mark Zhang
• [PATCH 1/1] ARM: tegra: bus_notifier registers IOMMU devices(was: How to specify IOMMU'able devices in DT)   Mark Zhang
• [PATCH] ARM: dt: tegra: cardhu: Add drm components   Mark Zhang
• [PATCH v3 9/9] pinctrl: single: dump pinmux register value   Haojian Zhuang
• [PATCH RESEND] ARM: pxa27x_keypad: clear pending interrupts on keypad config   Haojian Zhuang
• [PATCH 08/10] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH v3 5/9] document: devicetree: bind pinconf with pin-single   Haojian Zhuang
• [PATCH v4 0/9] use pinctrl-single in arch mmp   Haojian Zhuang
• [PATCH v4 1/9] ARM: mmp: select pinctrl driver   Haojian Zhuang
• [PATCH v4 2/9] pinctrl: single: support gpio request and free   Haojian Zhuang
• [PATCH v4 3/9] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH v4 4/9] ARM: dts: support pinctrl single in pxa910   Haojian Zhuang
• [PATCH v4 5/9] document: devicetree: bind pinconf with pin-single   Haojian Zhuang
• [PATCH v4 6/9] tty: pxa: configure pin   Haojian Zhuang
• [PATCH v4 7/9] i2c: pxa: use devm_kzalloc   Haojian Zhuang
• [PATCH v4 8/9] i2c: pxa: configure pinmux   Haojian Zhuang
• [PATCH v4 9/9] pinctrl: single: dump pinmux register value   Haojian Zhuang
• [PATCH v4 4/9] ARM: dts: support pinctrl single in pxa910   Haojian Zhuang
• [PATCH v4 1/9] ARM: mmp: select pinctrl driver   Haojian Zhuang
• [PATCH v4 2/9] pinctrl: single: support gpio request and free   Haojian Zhuang
• [PATCH v4 9/9] pinctrl: single: dump pinmux register value   Haojian Zhuang
• [PATCH v4 5/9] document: devicetree: bind pinconf with pin-single   Haojian Zhuang
• [PATCH v4 5/9] document: devicetree: bind pinconf with pin-single   Haojian Zhuang
• [PATCH v5 0/10] use pinctrl-single in arch mmp   Haojian Zhuang
• [PATCH v5 01/10] ARM: mmp: select pinctrl driver   Haojian Zhuang
• [PATCH v5 02/10] pinctrl: single: support gpio request and free   Haojian Zhuang
• [PATCH v5 03/10] pinctrl: append method of lookup pinctrl map   Haojian Zhuang
• [PATCH v5 04/10] pinctrl: generic: add input schmitt disable parameter   Haojian Zhuang
• [PATCH v5 05/10] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH v5 06/10] ARM: dts: support pinctrl single in pxa910   Haojian Zhuang
• [PATCH v5 07/10] document: devicetree: bind pinconf with pin single   Haojian Zhuang
• [PATCH v5 08/10] tty: pxa: configure pin   Haojian Zhuang
• [PATCH v5 09/10] i2c: pxa: use devm_kzalloc   Haojian Zhuang
• [PATCH v5 10/10] i2c: pxa: configure pinmux   Haojian Zhuang
• [PATCH] ARM: pxa: remove pxa95x support   Haojian Zhuang
• [PATCH] ARM: pxa: remove pxa95x support   Haojian Zhuang
• [PATCH] ARM: pxa: remove pxa95x support   Haojian Zhuang
• [PATCH 1/2] ARM: dts: support pinctrl single in aspenite   Haojian Zhuang
• [PATCH 2/2] ARM: mmp: support pinctrl single in brownstone   Haojian Zhuang
• [PATCH v5 03/10] pinctrl: append method of lookup pinctrl map   Haojian Zhuang
• [PATCH v5 05/10] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH v5 05/10] pinctrl: single: support pinconf generic   Haojian Zhuang
• [PATCH 1/2] ARM: dts: support pinctrl single in aspenite   Haojian Zhuang
• [PATCH 2/2] ARM: mmp: support pinctrl single in brownstone   Haojian Zhuang
• [PATCH V3 11/11] ARM: delete struct sys_timer   Haojian Zhuang
• [PATCH 1/1] ARM: pxa: fix pxa25x gpio wakeup setting   Haojian Zhuang
• [GIT PULL][for 3.8] pull request from arch-pxa tree on armsoc/board branch   Haojian Zhuang
• [GIT PULL][for 3.8] pull request from arch-pxa tree on armsoc/fix branch   Haojian Zhuang
• [PATCH] ARM: pxa: pxa25x.c: add dummy SA1100 rtc clock   Haojian Zhuang
• [GIT PULL][for 3.8] pull request from arch pxa tree on armsoc/fix   Haojian Zhuang
• [PATCH 1/4] rtc: sa1100: enable/disable rtc when probe/remove the device   Haojian Zhuang
• [PATCH 2/4] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC   Bartlomiej Zolnierkiewicz
• [PATCH 3/4] ARM: dts: exynos4: add node for PL330 MDMA1 controller   Bartlomiej Zolnierkiewicz
• [PATCH 4/4] DMA: PL330: add device tree property for DMA_MEMCPY capability   Bartlomiej Zolnierkiewicz
• [PATCH 1/4] DMA: PL330: fix locking in pl330_free_chan_resources()   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected   Marc Zyngier
• [PATCH] ARM: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected   Marc Zyngier
• [PATCH v4 3/5] ARM: KVM: arch_timers: Add guest timer core support   Marc Zyngier
• [PATCH v4 4/5] ARM: KVM: arch_timers: Add timer world switch   Marc Zyngier
• [PATCH v4 3/5] ARM: KVM: arch_timers: Add guest timer core support   Marc Zyngier
• [PATCH v4 03/13] ARM: KVM: Initial VGIC infrastructure support   Marc Zyngier
• [PATCH v4 02/13] ARM: KVM: Keep track of currently running vcpus   Marc Zyngier
• [kvmarm] [PATCH v4 05/13] ARM: KVM: VGIC accept vcpu and dist base addresses from user space   Marc Zyngier
• [PATCH v4 04/13] ARM: KVM: Initial VGIC MMIO support code   Marc Zyngier
• [PATCH v4 06/13] ARM: KVM: VGIC distributor handling   Marc Zyngier
• [ARM] head.S change broke platform device registration?   Marc Zyngier
• [ARM] head.S change broke platform device registration?   Marc Zyngier
• [PATCH] i2c: at91: fix compilation issue due to header move   ludovic.desroches at atmel.com
• [PATCH v2] i2c: at91: add dma support   ludovic.desroches at atmel.com
• [PATCH] i2c: at91: fix SMBus quick command   ludovic.desroches at atmel.com
• [PATCH v2] i2c: at91: fix SMBus quick command   ludovic.desroches at atmel.com
• [PATCH v3 0/3] i2c: at91: add dma support   ludovic.desroches at atmel.com
• [PATCH 1/3] i2c: at91: fix compilation warning   ludovic.desroches at atmel.com
• [PATCH 2/3] i2c: at91: change struct members indentation   ludovic.desroches at atmel.com
• [PATCH 3/3] i2c: at91: add dma support   ludovic.desroches at atmel.com
• [RESEND PATCH v3 0/3] i2c: at91: add dma support   ludovic.desroches at atmel.com
• [PATCH 1/3] i2c: at91: fix compilation warning   ludovic.desroches at atmel.com
• [PATCH 2/3] i2c: at91: change struct members indentation   ludovic.desroches at atmel.com
• [PATCH 3/3] i2c: at91: add dma support   ludovic.desroches at atmel.com
• [PATCH 1/3] i2c: at91: fix compilation warning   ludovic.desroches at atmel.com
• 房事时间短原因?   fg-hijkl29 at 163.com
• [PATCH] add hardware I2C support for ARM IMX23   sander van ginkel
• [PATCH] add hardware I2C support for ARM IMX23   sander van ginkel
• [PATCH] add hardware I2C support for ARM IMX23   sander van ginkel
• [PATCH] add hardware I2C support for ARM IMX23   sander van ginkel
• [PATCH] add hardware I2C support for ARM IMX23   sander van ginkel
• [PATCH] ARM: EXYNOS: Add support for ORIGEN4QUAD board   chlrbgh0 at gmail.com
• [PATCH] ARM: dts: add initial dts file for ORIGEN4QUAD   chlrbgh0 at gmail.com
• [PATCH] ARM: sharpsl_param: Fix hang on boot in sharpsl_save_param().   dromede at gmail.com
• [PATCH] backlight: corgi_lcd: Fix WARN_ON() when calling corgi_bl_set_intensity.   dromede at gmail.com
• [RFC][PATCH] pxamci: defining CONFIG_REGULATOR_DUMMY may break PXA MMC controller driver.   dromede at gmail.com
• [PATCH] [ARM] pxa/spitz: Minor code refactor and typo fixes   dromede at gmail.com
• [PATCH] [ARM] pxa/spitz: Disable usb port 1 and 3   dromede at gmail.com
• [PATCH] backlight: corgi_lcd: Use gpio_set_value_cansleep() for akita machines to avoid WARN_ON trigger   dromede at gmail.com
• [PATCH 1/2] ARM: S3C64XX: Remove duplicated camera clock   dron0gus at gmail.com
• [PATCH 2/2] ARM: S3C64XX: Staticly define parent clock of "camera" clock   dron0gus at gmail.com
• [PATCH 1/1] ARM: oprofile: add A5/A7/A15 entries in op_perf_name   jgq516 at gmail.com
• [PATCH] ARM: mxs: apf28dev: Add I2C, SPI and spidev support   gwenhael.goavec
• [PATCH 097/493] scsi: remove use of __devexit_p   vinayak holikatti
• [PATCH 192/493] scsi: remove use of __devinit   vinayak holikatti
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Jello huang
• Kernel panic - not syncing: Attempted to kill init!   Jello huang
• [PATCH 0/5] OMAPFB: use dma_alloc instead of omap's vram   Jello huang
• [RFC PATCH] ARM: OMAP4: ID: Improve features detection and check   ivan.khoronzhuk
• [PATCH] ARM: dts: add initial dts file for ORIGEN4QUAD   kh.choi
• [PATCH] ARM: dts: add initial dts file for ORIGEN4QUAD   kh.choi
• [Xen-devel] BUG: ARM build failures due to Xen   konrad
• How does atomic operation work on smp   anish kumar
• [PATCH 0/9] Pinctrl: SPEAr: Fixes for 3.7-rc3   viresh kumar
• [PATCH] clk: spear: Add stub functions for spear3[0|1|2]0_clk_init()   viresh kumar
• [PATCH 2/5] gpiolib-of: staticize the pin range calls   viresh kumar
• [PATCH 3/5] gpiolib: remove duplicate pin range code   viresh kumar
• [PATCH 4/5] gpiolib: call pin removal in chip removal function   viresh kumar
• [PATCH 12/14] ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT   viresh kumar
• [PATCH 00/14] ARM: SPEAr: DT updates   viresh kumar
• [PATCH 055/493] dma: remove use of __devexit_p   viresh kumar
• [PATCH 077/493] mmc: remove use of __devexit_p   viresh kumar
• [PATCH 226/493] dma: remove use of __devinit   viresh kumar
• [PATCH 138/493] pinctrl: remove use of __devexit_p   viresh kumar
• [PATCH 195/493] pinctl: remove use of __devinit   viresh kumar
• [PATCH 237/493] mmc: remove use of __devinit   viresh kumar
• [PATCH 9/9] ARM: remove mach .handle_irq for VIC users   viresh kumar
• [PATCH 6/9] ARM: remove mach .handle_irq for GIC users   viresh kumar
• [PATCH 1/8] DMA: PL330: use prefix in reg names to build under x86   viresh kumar
• [PATCH 3/8] pl080.h: moved from arm/include/asm/hardware to include/linux/amba/   viresh kumar
• [PATCH 4/8] watchdog: sp805_wdt depends on ARM   viresh kumar
• [PATCH 2/8] gpio: pl061 depends on ARM   viresh kumar
• [PATCH 6/8] mmc: use the new <linux/sizes.h>   viresh kumar
• [PATCH] ARM: use clockevents_config_and_register() where possible   viresh kumar
• [RFC 1/2] clk: use struct clk only for external API   viresh kumar
• [RFC 1/2] clk: use struct clk only for external API   viresh kumar
• arm: Add ARM ERRATA 775420 workaround   jungseung lee
• arm: Add ARM ERRATA 775420 workaround   jungseung lee
• arm: Add ARM ERRATA 775420 workaround   jungseung lee
• arm: Add ARM ERRATA 775420 workaround   jungseung lee
• test   jungseung lee
• some question about arm kernel   loody
• [PATCH] i2c: at91: add a sanity check on i2c message length   ludovic.desroches
• [PATCH] i2c: at91: add a sanity check on i2c message length   ludovic.desroches
• [PATCH] i2c: at91: fix compilation issue due to header move   ludovic.desroches
• [PATCH 237/493] mmc: remove use of __devinit   ludovic.desroches
• [PATCH v3 0/3] i2c: at91: add dma support   ludovic.desroches
• Add PI/robust mutexes support for SMP kernels   niyas mydeen
• usb clock not found on imx27 when using dt   s.hauer at pengutronix.de
• usb clock not found on imx27 when using dt   s.hauer at pengutronix.de
• usb clock not found on imx27 when using dt   s.hauer at pengutronix.de
• arch/arm/kernel/smp_twd.c:370:3: warning: 'return' with a value, in function returning void   kbuild test robot
• [arm-soc:for-next 24/32] arch/arm/mach-omap2/board-generic.c:115:13: error: 'omap_prcm_restart' undeclared here (not in a function)   kbuild test robot
• [arm-soc:testing/defconfig-warnings 5/7] warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && KMEMCHECK) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN || MN10300) || ARCH_WANT_FRAME_POINTERS || MCOUNT)   kbuild test robot
• [PATCH] OMAP2+: mux: Fixed gpio mux mode analysis.   oleg.matcovschi at ti.com
• [PATCH v2] OMAP2+: mux: Fixed gpio mux mode analysis.   oleg.matcovschi at ti.com
• usb clock not found on imx27 when using dt   trem
• usb clock not found on imx27 when using dt   trem
• Kernel uncompression error   woody
• Kernel uncompression error   woody
• ttySAC0 or ttyS0 in 3.6.x ARM Linux?   woody