[PATCH 05/13] ARM: OMAP2+: PRCM: create SoC-specific chip restart functions
Paul Walmsley
paul at pwsan.com
Thu Nov 1 07:57:42 EDT 2012
Here's an update of this one.
- Paul
From: Paul Walmsley <paul at pwsan.com>
Date: Mon, 29 Oct 2012 20:56:07 -0600
Subject: [PATCH] ARM: OMAP2+: PRCM: create SoC-specific chip restart
functions
Split omap_prcm_restart() from mach-omap2/prcm.c into SoC-specific
variants. These functions need to be able to save the reboot reason
into the scratchpad RAM. This implies a dependency on both the PRM
and SCM IP blocks, so they've been moved into their own file. This
will eventually call functions in the PRM and SCM drivers, once those
are created.
Vaibhav Hiremath <hvaibhav at ti.com> identified an unused prototype in
the first version of this patch - now removed.
Signed-off-by: Paul Walmsley <paul at pwsan.com>
Cc: Vaibhav Hiremath <hvaibhav at ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav at ti.com>
---
arch/arm/mach-omap2/Makefile | 5 +++
arch/arm/mach-omap2/common.h | 24 +++++++++++++
arch/arm/mach-omap2/omap2-restart.c | 65 +++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/omap3-restart.c | 36 +++++++++++++++++++
arch/arm/mach-omap2/omap4-common.c | 16 +++++++++
5 files changed, 146 insertions(+)
create mode 100644 arch/arm/mach-omap2/omap2-restart.c
create mode 100644 arch/arm/mach-omap2/omap3-restart.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ae87a3e..1988810 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -50,6 +50,11 @@ AFLAGS_sram242x.o :=-Wa,-march=armv6
AFLAGS_sram243x.o :=-Wa,-march=armv6
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
+# Restart code (OMAP4/5 currently in omap4-common.c)
+obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
+obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o
+obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o
+
# Pin multiplexing
obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index b8f7710..3f5aa9d 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -121,6 +121,30 @@ void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
void omap_prcm_restart(char, const char *);
+#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
+void omap2xxx_restart(char mode, const char *cmd);
+#else
+static inline void omap2xxx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+void omap3xxx_restart(char mode, const char *cmd);
+#else
+static inline void omap3xxx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+void omap44xx_restart(char mode, const char *cmd);
+#else
+static inline void omap44xx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
/* This gets called from mach-omap2/io.c, do not call this */
void __init omap2_set_globals_tap(u32 class, void __iomem *tap);
diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c
new file mode 100644
index 0000000..be6bc89
--- /dev/null
+++ b/arch/arm/mach-omap2/omap2-restart.c
@@ -0,0 +1,65 @@
+/*
+ * omap2-restart.c - code common to all OMAP2xxx machines.
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include "common.h"
+#include "prm2xxx.h"
+
+/*
+ * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set
+ * clock and the sys_ck. Used during the reset process
+ */
+static struct clk *reset_virt_prcm_set_ck, *reset_sys_ck;
+
+/* Reboot handling */
+
+/**
+ * omap2xxx_restart - Set DPLL to bypass mode for reboot to work
+ *
+ * Set the DPLL to bypass so that reboot completes successfully. No
+ * return value.
+ */
+void omap2xxx_restart(char mode, const char *cmd)
+{
+ u32 rate;
+
+ rate = clk_get_rate(reset_sys_ck);
+ clk_set_rate(reset_virt_prcm_set_ck, rate);
+
+ /* XXX Should save the cmd argument for use after the reboot */
+
+ omap2xxx_prm_dpll_reset(); /* never returns */
+ while (1);
+}
+
+/**
+ * omap2xxx_common_look_up_clks_for_reset - look up clocks needed for restart
+ *
+ * Some clocks need to be looked up in advance for the SoC restart
+ * operation to work - see omap2xxx_restart(). Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int __init omap2xxx_common_look_up_clks_for_reset(void)
+{
+ reset_virt_prcm_set_ck = clk_get(NULL, "virt_prcm_set");
+ if (IS_ERR(reset_virt_prcm_set_ck))
+ return -EINVAL;
+
+ reset_sys_ck = clk_get(NULL, "sys_ck");
+ if (IS_ERR(reset_sys_ck))
+ return -EINVAL;
+
+ return 0;
+}
+core_initcall(omap2xxx_common_look_up_clks_for_reset);
diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c
new file mode 100644
index 0000000..923c582
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3-restart.c
@@ -0,0 +1,36 @@
+/*
+ * omap3-restart.c - Code common to all OMAP3xxx machines.
+ *
+ * Copyright (C) 2009, 2012 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony at atomide.com>
+ * Santosh Shilimkar <santosh.shilimkar at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "control.h"
+#include "prm3xxx.h"
+
+/* Global address base setup code */
+
+/**
+ * omap3xxx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC. For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c. No return value.
+ */
+void omap3xxx_restart(char mode, const char *cmd)
+{
+ omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
+ omap3xxx_prm_dpll3_reset(); /* never returns */
+ while (1);
+}
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6cd7e87..34bd16a 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -33,6 +33,7 @@
#include "common.h"
#include "mmc.h"
#include "hsmmc.h"
+#include "prminst44xx.h"
#include "omap4-sar-layout.h"
#include "omap-secure.h"
@@ -248,6 +249,21 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev)
return 0;
}
+/**
+ * omap44xx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC. For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c. No return value.
+ */
+void omap44xx_restart(char mode, const char *cmd)
+{
+ /* XXX Should save 'cmd' into scratchpad for use after reboot */
+ omap4_prminst_global_warm_sw_reset(); /* never returns */
+ while (1);
+}
+
static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
{
struct omap_mmc_platform_data *pdata;
--
1.7.10.4
More information about the linux-arm-kernel
mailing list