[PATCH v2 1/2] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER

[Santosh Shilimkar]

On Sunday 18 November 2012 08:36 PM, Igor Grinberg wrote:
> CONFIG_OMAP_32K_TIMER is kind of standing on the single zImage way.
> Make OMAP2+ timer code independant from the CONFIG_OMAP_32K_TIMER
> setting.
> To remove the dependancy, several conversions/additions had to be done:
> 1) Timer initialization functions are named by the platform
>     name and the clock source in use.
>     This also makes it possible to define and use the GPTIMER as the
>     clock source instead of the 32K timer on platforms that do not have
>     the 32K timer ip block or the 32K timer is not wired on the board.
>     Cirrently, the the timer is chosen in the machine_desc structure on
>     per board basis. Later, DT should be used to choose the timer.
> 2) Settings under the CONFIG_OMAP_32K_TIMER option are used as defaults
>     and those under !CONFIG_OMAP_32K_TIMER are removed.
>     This removes the CONFIG_OMAP_32K_TIMER on OMAP2+ timer code.
> 3) Since we have all the timers defined inside machine_desc structure
>     and we no longer need the fallback to gp_timer clock source in case
>     32k_timer clock source is unavailable (namely on AM33xx), we no
>     longer need the #ifdef around __omap2_sync32k_clocksource_init()
>     function. Remove the #ifdef CONFIG_OMAP_32K_TIMER around the
>     __omap2_sync32k_clocksource_init() function.
>
> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
> Cc: Jon Hunter <jon-hunter at ti.com>
> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
> Cc: Vaibhav Hiremath <hvaibhav at ti.com>
> ---
nice clean-up Igor. Patch looks good to my eyes.
Feel free to add ,

Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>