[PATCH] ARM: highbank: use common debug_ll_io_init

Rob Herring robherring2 at gmail.com
Wed Nov 7 19:09:01 EST 2012


From: Rob Herring <rob.herring at calxeda.com>

Remove the platform static mapping code for uart and use the common
debug_ll_io_init function.

Signed-off-by: Rob Herring <rob.herring at calxeda.com>
---
This is dependent on arm-soc/devel/debug_ll_init and
arm-soc/calxeda/ecx-2000 branches. 

Rob

 arch/arm/mach-highbank/Makefile   |    1 -
 arch/arm/mach-highbank/core.h     |    5 -----
 arch/arm/mach-highbank/highbank.c |    8 ++------
 arch/arm/mach-highbank/lluart.c   |   34 ----------------------------------
 4 files changed, 2 insertions(+), 46 deletions(-)
 delete mode 100644 arch/arm/mach-highbank/lluart.c

diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index 3ec8bdd..8a1ef57 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -3,7 +3,6 @@ obj-y					:= highbank.o system.o smc.o
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
 
-obj-$(CONFIG_DEBUG_HIGHBANK_UART)	+= lluart.o
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
 obj-$(CONFIG_PM_SLEEP)			+= pm.o
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index 286ec82..603b536 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -2,11 +2,6 @@ extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
 extern void highbank_clocks_init(void);
 extern void highbank_restart(char, const char *);
 extern void __iomem *scu_base_addr;
-#ifdef CONFIG_DEBUG_HIGHBANK_UART
-extern void highbank_lluart_map_io(void);
-#else
-static inline void highbank_lluart_map_io(void) {}
-#endif
 
 #ifdef CONFIG_PM_SLEEP
 extern void highbank_pm_init(void);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 3e60e57..dc24816 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -35,6 +35,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
 #include "core.h"
@@ -53,11 +54,6 @@ static void __init highbank_scu_map_io(void)
 	scu_base_addr = ioremap(base, SZ_4K);
 }
 
-static void __init highbank_map_io(void)
-{
-	highbank_lluart_map_io();
-}
-
 #define HB_JUMP_TABLE_PHYS(cpu)		(0x40 + (0x10 * (cpu)))
 #define HB_JUMP_TABLE_VIRT(cpu)		phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
 
@@ -211,7 +207,7 @@ static const char *highbank_match[] __initconst = {
 
 DT_MACHINE_START(HIGHBANK, "Highbank")
 	.smp		= smp_ops(highbank_smp_ops),
-	.map_io		= highbank_map_io,
+	.map_io		= debug_ll_io_init,
 	.init_irq	= highbank_init_irq,
 	.timer		= &highbank_timer,
 	.handle_irq	= gic_handle_irq,
diff --git a/arch/arm/mach-highbank/lluart.c b/arch/arm/mach-highbank/lluart.c
deleted file mode 100644
index 3715750..0000000
--- a/arch/arm/mach-highbank/lluart.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/mach/map.h>
-
-#define HB_DEBUG_LL_PHYS_BASE	0xfff36000
-#define HB_DEBUG_LL_VIRT_BASE	0xfee36000
-
-static struct map_desc lluart_io_desc __initdata = {
-	.virtual	= HB_DEBUG_LL_VIRT_BASE,
-	.pfn		= __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-};
-
-void __init highbank_lluart_map_io(void)
-{
-	iotable_init(&lluart_io_desc, 1);
-}
-- 
1.7.10.4




More information about the linux-arm-kernel mailing list