[PATCH v2] ARM: dts: AM33XX: Add usbss node

[Benoit Cousson]

On 11/06/2012 03:29 PM, Felipe Balbi wrote:
> Hi,
> 
> On Tue, Nov 06, 2012 at 07:59:38PM +0530, Afzal Mohammed wrote:
>> From: Ajay Kumar Gupta <ajay.gupta at ti.com>
>>
>> Device tree node for usbss on AM33XX. There are two musb
>> controllers on am33xx platform so have port0-mode and
>> port1-mode data.
>>
>> [afzal at ti.com: reg & interrupt property addition]
>>
>> Signed-off-by: Ajay Kumar Gupta <ajay.gupta at ti.com>
>> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri at ti.com>
>> Signed-off-by: Ravi Babu <ravibabu at ti.com>
>> Signed-off-by: Afzal Mohammed <afzal at ti.com>
> 
> to my eyes, this looks ok.
> 
> Reviewed-by: Felipe Balbi <balbi at ti.com>

Thanks Felipe. Patch applied in for_3.8/dts_part2 branch.

Regards,
Benoit

> 
>> ---
>>
>> v2: node named as "usb"
>>
>> Depends on "usb: musb: dsps: dt binding - add resources, example"
>> (https://patchwork.kernel.org/patch/1704691/)
>>
>>  arch/arm/boot/dts/am33xx.dtsi | 17 +++++++++++++++++
>>  1 file changed, 17 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index 5dfd682..20a3f29 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -321,5 +321,22 @@
>>  			ti,hwmods = "spi1";
>>  			status = "disabled";
>>  		};
>> +
>> +		usb at 47400000 {
>> +			compatible = "ti,musb-am33xx";
>> +			reg = <0x47400000 0x1000	/* usbss */
>> +			       0x47401000 0x800		/* musb instance 0 */
>> +			       0x47401800 0x800>;	/* musb instance 1 */
>> +			interrupts = <17		/* usbss */
>> +				      18		/* musb instance 0 */
>> +				      19>;		/* musb instance 1 */
>> +			multipoint = <1>;
>> +			num-eps = <16>;
>> +			ram-bits = <12>;
>> +			port0-mode = <3>;
>> +			port1-mode = <3>;
>> +			power = <250>;
>> +			ti,hwmods = "usb_otg_hs";
>> +		};
>>  	};
>>  };
>> -- 
>> 1.7.12
>>
>