[PATCH] ARM: OMAP3: Devkit8000: Fix dvi output

[Thomas Weber]

Hello Tomi,

On 11/19/2012 06:52 AM, Tomi Valkeinen wrote:
> On 2012-11-18 18:28, Thomas Weber wrote:
>> Add i2c bus number for DVI output.
>> The driver uses this to detect if a panel is connected and to read EDID.
>>
>> Signed-off-by: Thomas Weber <thomas at tomweber.eu>
>> Cc: stable at vger.kernel.org #v3.5 v3.6
>> ---
>>   arch/arm/mach-omap2/board-devkit8000.c | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
>> index 1fd161e..73d3d8e 100644
>> --- a/arch/arm/mach-omap2/board-devkit8000.c
>> +++ b/arch/arm/mach-omap2/board-devkit8000.c
>> @@ -138,6 +138,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
>>   };
>>   
>>   static struct tfp410_platform_data dvi_panel = {
>> +	.i2c_bus_num		= 1,
>>   	.power_down_gpio	= -1,
>>   };
> That change is already included in the "[PATCH] OMAP: board-files: fix
> i2c_bus for tfp410" path I sent on Friday.
>
>   Tomi
>
>
Thanks.

Thomas