[PATCH 4/8] mfd: Correct copy and paste mistake in stmpe

[Lee Jones]

When specifying IRQ numbers for the stmpe1601, IRQ defines for the
stmpe24xx were used instead. Fortunately, the defined numbers are
the same, hence why it survived testing. This fix is merely an
aesthetic one.

Cc: Samuel Ortiz <sameo at linux.intel.com>
Acked-by: Arnd Bergmann <arnd at arndb.de>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/mfd/stmpe.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 5c8d8f2..e50ebdf 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -519,12 +519,12 @@ static const u8 stmpe1601_regs[] = {
 static struct stmpe_variant_block stmpe1601_blocks[] = {
 	{
 		.cell	= &stmpe_gpio_cell,
-		.irq	= STMPE24XX_IRQ_GPIOC,
+		.irq	= STMPE1601_IRQ_GPIOC,
 		.block	= STMPE_BLOCK_GPIO,
 	},
 	{
 		.cell	= &stmpe_keypad_cell,
-		.irq	= STMPE24XX_IRQ_KEYPAD,
+		.irq	= STMPE1601_IRQ_KEYPAD,
 		.block	= STMPE_BLOCK_KEYPAD,
 	},
 };
-- 
1.7.9.5