[PATCH 06/10] ARM: S3C24XX: assimilate s3c2416 subirqs into new structure
Heiko Stübner
heiko at sntech.de
Sat Nov 17 19:55:16 EST 2012
The contents of the base interrupt register is identical for
s3c2443 and s3c2416/2450, so keep it separate already.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/plat-s3c24xx/irq.c | 257 ++++++++++++-------------------------------
1 files changed, 72 insertions(+), 185 deletions(-)
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index ca60486..ace7e34 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -762,158 +762,44 @@ struct syscore_ops s3c24xx_irq_syscore_ops = {
};
#endif
-#ifdef CONFIG_CPU_S3C2416
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
-{
- unsigned int subsrc, submsk;
- unsigned int end;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= (irq - S3C2410_IRQSUB(0));
- subsrc &= (1 << len)-1;
-
- end = len + irq;
-
- for (; irq < end && subsrc; irq++) {
- if (subsrc & 1)
- generic_handle_irq(irq);
-
- subsrc >>= 1;
- }
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
- s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2416_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2416_irq_wdtac97 = {
- .irq_mask = s3c2416_irq_wdtac97_mask,
- .irq_unmask = s3c2416_irq_wdtac97_unmask,
- .irq_ack = s3c2416_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
- s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2416_irq_lcd_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2416_irq_lcd = {
- .irq_mask = s3c2416_irq_lcd_mask,
- .irq_unmask = s3c2416_irq_lcd_unmask,
- .irq_ack = s3c2416_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
- s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-
-static void s3c2416_irq_dma_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2416_irq_dma_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2416_irq_dma_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2416_irq_dma = {
- .irq_mask = s3c2416_irq_dma_mask,
- .irq_unmask = s3c2416_irq_dma_unmask,
- .irq_ack = s3c2416_irq_dma_ack,
+#if defined CONFIG_CPU_S3C2416 || defined CONFIG_CPU_S3C2443
+struct s3c_irq_data init_s3c2443base[32] = {
+ { .type = S3C_IRQTYPE_EINT0T4, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT0T4, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT0T4, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT0T4, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_PARENT, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_PARENT, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_PARENT, }, /* CAM on S3C2443/2450 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_PARENT, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_PARENT, }, /* UART2 */
+ { .type = S3C_IRQTYPE_PARENT, }, /* LCD */
+ { .type = S3C_IRQTYPE_PARENT, }, /* DMA */
+ { .type = S3C_IRQTYPE_PARENT, }, /* UART3 */
+ { .type = S3C_IRQTYPE_NONE, }, /* CFON on S3C2443/2450 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_PARENT, }, /* UART1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_PARENT, }, /* UART0 */
+ { .type = S3C_IRQTYPE_NONE, }, /* SPI1 on S3C243/2450 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_PARENT, }, /* ADCPARENT */
};
+#endif
-/* UART3 sub interrupts */
-
-static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
- s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2416_irq_uart3_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2416_irq_uart3 = {
- .irq_mask = s3c2416_irq_uart3_mask,
- .irq_unmask = s3c2416_irq_uart3_unmask,
- .irq_ack = s3c2416_irq_uart3_ack,
-};
+#ifdef CONFIG_CPU_S3C2416
/* second interrupt register */
@@ -952,27 +838,6 @@ struct irq_chip s3c2416_irq_second = {
};
-/* IRQ initialisation code */
-
-static int s3c2416_add_sub(unsigned int base,
- void (*demux)(unsigned int,
- struct irq_desc *),
- struct irq_chip *chip,
- unsigned int start, unsigned int end)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
- irq_set_chained_handler(base, demux);
-
- for (irqno = start; irqno <= end; irqno++) {
- irq_set_chip_and_handler(irqno, chip, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
static void s3c2416_irq_add_second(void)
{
unsigned long pend;
@@ -1009,26 +874,48 @@ static void s3c2416_irq_add_second(void)
}
}
+struct s3c_irq_data init_s3c2416subint[32] = {
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_SUBEDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_SUBEDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 6 }, /* CAM_C S3C2450 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 6 }, /* CAM_P S3C2450 */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 16 }, /* LCD2 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 16 }, /* LCD3 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 16 }, /* LCD4 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 17 }, /* DMA0 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 17 }, /* DMA1 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 17 }, /* DMA2 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 17 }, /* DMA3 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 17 }, /* DMA4 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 17 }, /* DMA5 */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 18 }, /* UART3-RX */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 18 }, /* UART3-TX */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 18 }, /* UART3-ERR */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_SUBLEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
void __init s3c2416_init_irq(void)
{
+ /* override irq data */
+ s3c_intc[0].irqs = &init_s3c2443base[0];
+ s3c_intc[2].irqs = &init_s3c2416subint[0];
+
pr_info("S3C2416: IRQ Support\n");
s3c24xx_init_irq();
- s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
- IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
-
- s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
- &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
- s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
- &s3c2416_irq_uart3,
- IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
- s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
- &s3c2416_irq_wdtac97,
- IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
s3c2416_irq_add_second();
}
--
1.7.2.3
More information about the linux-arm-kernel
mailing list