[PATCH 3/5] cpufreq: dbx500: Move clk_get to probe

[Ulf Hansson]

From: Ulf Hansson <ulf.hansson at linaro.org>

The armss clock shall only be fetched at probe thus move this here.
Same thing goes for the printing of the available frequencies.

Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
Reviewed-by: Jonas Aaberg <jonas.aberg at stericsson.com>
---
 drivers/cpufreq/dbx500-cpufreq.c |   29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
index 0a411b5..d974a8e 100644
--- a/drivers/cpufreq/dbx500-cpufreq.c
+++ b/drivers/cpufreq/dbx500-cpufreq.c
@@ -90,28 +90,14 @@ static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu)
 
 static int __cpuinit dbx500_cpufreq_init(struct cpufreq_policy *policy)
 {
-	int i = 0;
 	int res;
 
-	armss_clk = clk_get(NULL, "armss");
-	if (IS_ERR(armss_clk)) {
-		pr_err("dbx500-cpufreq : Failed to get armss clk\n");
-		return PTR_ERR(armss_clk);
-	}
-
-	pr_info("dbx500-cpufreq : Available frequencies:\n");
-	while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
-		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
-		i++;
-	}
-
 	/* get policy fields based on the table */
 	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
 	if (!res)
 		cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
 	else {
 		pr_err("dbx500-cpufreq : Failed to read policy table\n");
-		clk_put(armss_clk);
 		return res;
 	}
 
@@ -147,13 +133,26 @@ static struct cpufreq_driver dbx500_cpufreq_driver = {
 
 static int dbx500_cpufreq_probe(struct platform_device *pdev)
 {
-	freq_table = dev_get_platdata(&pdev->dev);
+	int i = 0;
 
+	freq_table = dev_get_platdata(&pdev->dev);
 	if (!freq_table) {
 		pr_err("dbx500-cpufreq: Failed to fetch cpufreq table\n");
 		return -ENODEV;
 	}
 
+	armss_clk = clk_get(&pdev->dev, "armss");
+	if (IS_ERR(armss_clk)) {
+		pr_err("dbx500-cpufreq : Failed to get armss clk\n");
+		return PTR_ERR(armss_clk);
+	}
+
+	pr_info("dbx500-cpufreq : Available frequencies:\n");
+	while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
+		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
+		i++;
+	}
+
 	return cpufreq_register_driver(&dbx500_cpufreq_driver);
 }
 
-- 
1.7.10