[PATCH 2/2] ARM: tegra: trimslice: enable HDMI port
Stephen Warren
swarren at wwwdotorg.org
Thu Nov 15 18:20:14 EST 2012
From: Thierry Reding <thierry.reding at avionic-design.de>
Enable host1x, and the HDMI output. Harmony also has a DVI port with an
HDMI form-factor connector, driven by Tegra's LVDS output. This isn't
enabled yet, due to potential issues with having multiple outputs enabled.
Correct DDC I2C frequency to 100KHz.
Add dummy/fixed regulators to satisfy the HDMI driver.
Signed-off-by: Thierry Reding <thierry.reding at avionic-design.de>
[swarren: add commit description, remove enable of DVI port]
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
arch/arm/boot/dts/tegra20-trimslice.dts | 44 ++++++++++++++++++++++++++++---
1 file changed, 40 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index f4e0428..b70b4cb 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -249,9 +261,9 @@
clock-frequency = <216000000>;
};
- i2c at 7000c000 {
+ dvi_ddc: i2c at 7000c000 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
spi at 7000c380 {
@@ -264,9 +276,9 @@
};
};
- i2c at 7000c400 {
+ hdmi_ddc: i2c at 7000c400 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
i2c at 7000c500 {
@@ -310,6 +322,30 @@
bus-width = <4>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_vdd_reg: regulator at 0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ hdmi_pll_reg: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-trimslice";
nvidia,i2s-controller = <&tegra_i2s1>;
--
1.7.10.4
More information about the linux-arm-kernel
mailing list