[PATCH 7/9] usb: chipidea: udc: add force-full-speed option

Michael Grzeschik m.grzeschik at pengutronix.de
Wed Nov 14 11:19:08 EST 2012


This patch makes it possible to set the chipidea udc
into full-speed only mode. It can be set by the oftree
property "force-full-speed".

Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
---
 drivers/usb/chipidea/bits.h  |    1 +
 drivers/usb/chipidea/core.c  |    5 +++++
 include/linux/usb/chipidea.h |    1 +
 3 files changed, 7 insertions(+)

diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index 3cded5f..85b6b09 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -51,6 +51,7 @@
 #define PORTSC_PTS            (BIT(31) | BIT(30))
 #define PORTSC_PTW            BIT(28)
 #define PORTSC_STS            BIT(29)
+#define PORTSC_PFSC           BIT(24)
 
 /* DEVLC */
 #define DEVLC_PSPD            (0x03UL << 25)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 7e80f1b..bc99cea 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -230,6 +230,9 @@ void hw_portsc_configure(struct ci13xxx *ci)
 		hw_write(ci, OP_PORTSC, PORTSC_PTS, 0x3 << ffs_nr(PORTSC_PTS));
 		hw_write(ci, OP_PORTSC, PORTSC_STS, 0x1 << ffs_nr(PORTSC_STS));
 	}
+
+	if (ci->platdata->flags & CI13XXX_PORTSC_PFSC)
+		hw_write(ci, OP_PORTSC, PORTSC_PFSC, 0x1 << ffs_nr(PORTSC_PFSC));
 }
 
 /**
@@ -566,6 +569,8 @@ void ci13xxx_get_dr_flags(struct device_node *of_node, struct ci13xxx_platform_d
 		pr_err("no phy interface defined\n");
 	}
 
+	if (of_find_property(of_node, "force-full-speed", NULL))
+		pdata->flags |= CI13XXX_PORTSC_PFSC;
 }
 EXPORT_SYMBOL_GPL(ci13xxx_get_dr_flags);
 
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index cafca23..9ffe105 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -26,6 +26,7 @@ struct ci13xxx_platform_data {
 #define CI13XXX_PORTSC_PTS_UTMI		BIT(8)
 #define CI13XXX_PORTSC_PTS_ULPI		BIT(9)
 #define CI13XXX_PORTSC_PTS_FSLS		BIT(10)
+#define CI13XXX_PORTSC_PFSC		BIT(11)
 
 #define CI13XXX_DR_MODE_MASK \
 	(CI13XXX_DR_MODE_HOST | CI13XXX_DR_MODE_PERIPHERAL)
-- 
1.7.10.4




More information about the linux-arm-kernel mailing list