[PATCH v2 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices

[Javier Martinez Canillas]

Add a generic .dtsi device tree source file for the
common characteristics across IGEP Technology devices.

Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
Acked-by: Matthias Brugger <matthias.bgg at gmail.com>
---
 arch/arm/boot/dts/omap3-igep.dtsi |   93 +++++++++++++++++++++++++++++++++++++
 1 files changed, 93 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-igep.dtsi

diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
new file mode 100644
index 0000000..a093bff
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -0,0 +1,93 @@
+/*
+ * Device Tree Source for IGEP Technology devices
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier at collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "igep2";
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		  &mcbsp2_pins
+	>;
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e 0x100	/* uart3_rx.uart3_rx INPUT | MODE0 */
+			0x170 0		/* uart3_tx.uart3_tx OUTPUT | MODE0 */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0x1a2 0x0104	/* mcspi1_cs2.gpio_176 INPUT | MODE4 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl at 48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		vsim: regulator at 10 {
+			compatible = "ti,twl4030-vsim";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			      };
+		};
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
-- 
1.7.7.6