[PATCH] davinci: vpbe: pass different platform names to handle different ip's
Prabhakar Lad
prabhakar.csengg at gmail.com
Tue Nov 20 04:33:34 EST 2012
Sekhar,
Thanks for the review.
On Tue, Nov 20, 2012 at 2:40 PM, Sekhar Nori <nsekhar at ti.com> wrote:
>
> On 11/19/2012 6:48 PM, Prabhakar Lad wrote:
>> From: Lad, Prabhakar <prabhakar.lad at ti.com>
>>
>> The vpbe driver can handle different platforms DM644X, DM36X and
>> DM355. To differentiate between this platforms venc_type/vpbe_type
>> was passed as part of platform data which was incorrect. The correct
>> way to differentiate to handle this case is by passing different
>> platform names.
>>
>> This patch creates platform_device_id[] array supporting different
>> platforms and assigns id_table to the platform driver, and finally
>> in the probe gets the actual device by using platform_get_device_id()
>> and gets the appropriate driver data for that platform.
>>
>> Taking this approach will also make the DT transition easier.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.lad at ti.com>
>> Signed-off-by: Manjunath Hadli <manjunath.hadli at ti.com>
>
> Looks good to me except some comments below. After addressing those,
> please feel free to add my:
>
> Acked-by: Sekhar Nori <nsekhar at ti.com>
>
> I assume you want to merge this from media tree to manage dependencies?
>
Yes I plan to get this one through media tree.
>> ---
>> arch/arm/mach-davinci/board-dm644x-evm.c | 8 ++--
>> arch/arm/mach-davinci/dm644x.c | 7 +--
>> drivers/media/platform/davinci/vpbe.c | 9 +++-
>> drivers/media/platform/davinci/vpbe_display.c | 4 +-
>> drivers/media/platform/davinci/vpbe_osd.c | 27 +++++++++-
>> drivers/media/platform/davinci/vpbe_venc.c | 67 +++++++++++++++++--------
>> include/media/davinci/vpbe_osd.h | 5 +-
>> include/media/davinci/vpbe_venc.h | 5 +-
>> 8 files changed, 94 insertions(+), 38 deletions(-)
>>
>> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
>> index f22572ce..b00ade4 100644
>> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
>> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
>> @@ -689,7 +689,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = {
>> .std = VENC_STD_ALL,
>> .capabilities = V4L2_OUT_CAP_STD,
>> },
>> - .subdev_name = VPBE_VENC_SUBDEV_NAME,
>> + .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME,
>> .default_mode = "ntsc",
>> .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing),
>> .modes = dm644xevm_enc_std_timing,
>> @@ -701,7 +701,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = {
>> .type = V4L2_OUTPUT_TYPE_ANALOG,
>> .capabilities = V4L2_OUT_CAP_DV_TIMINGS,
>> },
>> - .subdev_name = VPBE_VENC_SUBDEV_NAME,
>> + .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME,
>> .default_mode = "480p59_94",
>> .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing),
>> .modes = dm644xevm_enc_preset_timing,
>> @@ -712,10 +712,10 @@ static struct vpbe_config dm644xevm_display_cfg = {
>> .module_name = "dm644x-vpbe-display",
>> .i2c_adapter_id = 1,
>> .osd = {
>> - .module_name = VPBE_OSD_SUBDEV_NAME,
>> + .module_name = DM644X_VPBE_OSD_SUBDEV_NAME,
>> },
>> .venc = {
>> - .module_name = VPBE_VENC_SUBDEV_NAME,
>> + .module_name = DM644X_VPBE_VENC_SUBDEV_NAME,
>> },
>> .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs),
>> .outputs = dm644xevm_vpbe_outputs,
>> diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
>> index cd0c8b1..7b785ec 100644
>> --- a/arch/arm/mach-davinci/dm644x.c
>> +++ b/arch/arm/mach-davinci/dm644x.c
>> @@ -670,11 +670,11 @@ static struct resource dm644x_osd_resources[] = {
>> };
>>
>> static struct osd_platform_data dm644x_osd_data = {
>> - .vpbe_type = VPBE_VERSION_1,
>> + .field_inv_wa_enable = 0,
>
> Stray change in the patch? You anyway do not need to zero initialize.
>
Yes I added it since the driver had check if the platform data was null.
I'll remove this and also the check from the driver.
>> };
>>
>> static struct platform_device dm644x_osd_dev = {
>> - .name = VPBE_OSD_SUBDEV_NAME,
>> + .name = DM644X_VPBE_OSD_SUBDEV_NAME,
>> .id = -1,
>> .num_resources = ARRAY_SIZE(dm644x_osd_resources),
>> .resource = dm644x_osd_resources,
>> @@ -752,12 +752,11 @@ static struct platform_device dm644x_vpbe_display = {
>> };
>>
>> static struct venc_platform_data dm644x_venc_pdata = {
>> - .venc_type = VPBE_VERSION_1,
>> .setup_clock = dm644x_venc_setup_clock,
>> };
>>
>> static struct platform_device dm644x_venc_dev = {
>> - .name = VPBE_VENC_SUBDEV_NAME,
>> + .name = DM644X_VPBE_VENC_SUBDEV_NAME,
>> .id = -1,
>> .num_resources = ARRAY_SIZE(dm644x_venc_resources),
>> .resource = dm644x_venc_resources,
>> diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
>> index 7f5cf9b..0dd3c62 100644
>> --- a/drivers/media/platform/davinci/vpbe.c
>> +++ b/drivers/media/platform/davinci/vpbe.c
>> @@ -558,9 +558,14 @@ static int platform_device_get(struct device *dev, void *data)
>> struct platform_device *pdev = to_platform_device(dev);
>> struct vpbe_device *vpbe_dev = data;
>>
>> - if (strcmp("vpbe-osd", pdev->name) == 0)
>> + if (!strcmp(DM644X_VPBE_OSD_SUBDEV_NAME, pdev->name) ||
>> + !strcmp(DM365_VPBE_OSD_SUBDEV_NAME, pdev->name) ||
>> + !strcmp(DM355_VPBE_OSD_SUBDEV_NAME, pdev->name))
>
> How about using strstr("vpbe-osd", pdev->name) != NULL instead? Here and
> in multiple other places in the patch.
>
Yes that would be good.
>> @@ -341,8 +356,8 @@ static int venc_set_576p50(struct v4l2_subdev *sd)
>>
>> v4l2_dbg(debug, 2, sd, "venc_set_576p50\n");
>>
>> - if ((pdata->venc_type != VPBE_VERSION_1) &&
>> - (pdata->venc_type != VPBE_VERSION_2))
>> + if ((venc->venc_type != VPBE_VERSION_1) &&
>> + (venc->venc_type != VPBE_VERSION_2))
>
> The broken line should be aligned correctly.
>
Ok.
Regards,
--Prabhakar Lad
> Thanks,
> Sekhar
>
More information about the linux-arm-kernel
mailing list