[PATCH] ARM: Exynos5: Remove i2c0 resource information and setting of device names

[Thomas Abraham]

All Exynos5 based platforms support only device tree based boot and so the
unused non-dt code that sets i2c0 resource information and device names for
sdhci and i2c platform devices are removed.

Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
---
 arch/arm/mach-exynos/common.c |   17 -----------------
 1 files changed, 0 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index d067ce7..1efcc6f 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -336,23 +336,6 @@ static void __init exynos4_map_io(void)
 static void __init exynos5_map_io(void)
 {
 	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
-
-	s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
-	s3c_device_i2c0.resource[0].end   = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
-	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
-	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
-
-	s3c_sdhci_setname(0, "exynos4-sdhci");
-	s3c_sdhci_setname(1, "exynos4-sdhci");
-	s3c_sdhci_setname(2, "exynos4-sdhci");
-	s3c_sdhci_setname(3, "exynos4-sdhci");
-
-	/* The I2C bus controllers are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-	s3c_i2c2_setname("s3c2440-i2c");
-
-	s3c64xx_spi_setname("exynos4210-spi");
 }
 
 static void __init exynos4_init_clocks(int xtal)
-- 
1.6.6.rc2