[PATCH] ARM: Exynos5: Remove i2c0 resource information and setting of device names

[Kukjin Kim]

Thomas Abraham wrote:
> 
> All Exynos5 based platforms support only device tree based boot and so the
> unused non-dt code that sets i2c0 resource information and device names
> for
> sdhci and i2c platform devices are removed.
> 
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
>  arch/arm/mach-exynos/common.c |   17 -----------------
>  1 files changed, 0 insertions(+), 17 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
> index d067ce7..1efcc6f 100644
> --- a/arch/arm/mach-exynos/common.c
> +++ b/arch/arm/mach-exynos/common.c
> @@ -336,23 +336,6 @@ static void __init exynos4_map_io(void)
>  static void __init exynos5_map_io(void)
>  {
>  	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
> -
> -	s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
> -	s3c_device_i2c0.resource[0].end   = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
> -	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
> -	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
> -
> -	s3c_sdhci_setname(0, "exynos4-sdhci");
> -	s3c_sdhci_setname(1, "exynos4-sdhci");
> -	s3c_sdhci_setname(2, "exynos4-sdhci");
> -	s3c_sdhci_setname(3, "exynos4-sdhci");
> -
> -	/* The I2C bus controllers are directly compatible with s3c2440 */
> -	s3c_i2c0_setname("s3c2440-i2c");
> -	s3c_i2c1_setname("s3c2440-i2c");
> -	s3c_i2c2_setname("s3c2440-i2c");
> -
> -	s3c64xx_spi_setname("exynos4210-spi");
>  }
> 
>  static void __init exynos4_init_clocks(int xtal)
> --
> 1.6.6.rc2

Applied, thanks.

K-Gene <kgene at kernel.org>