[PATCH 1/7] clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs

[Mike Turquette]

Quoting Maxime Ripard (2012-11-16 13:20:22)
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> Cc: Mike Turquette <mturquette at ti.com>

Acked-by: Mike Turquette <mturquette at linaro.or>

Regards,
Mike

> ---
>  drivers/clk/Makefile      |    1 +
>  drivers/clk/clk-sunxi.c   |   30 ++++++++++++++++++++++++++++++
>  include/linux/clk/sunxi.h |   22 ++++++++++++++++++++++
>  3 files changed, 53 insertions(+)
>  create mode 100644 drivers/clk/clk-sunxi.c
>  create mode 100644 include/linux/clk/sunxi.h
> 
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 71a25b9..9c300a8 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -19,6 +19,7 @@ endif
>  obj-$(CONFIG_MACH_LOONGSON1)   += clk-ls1x.o
>  obj-$(CONFIG_ARCH_U8500)       += ux500/
>  obj-$(CONFIG_ARCH_VT8500)      += clk-vt8500.o
> +obj-$(CONFIG_ARCH_SUNXI)       += clk-sunxi.o
>  
>  # Chip specific
>  obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
> diff --git a/drivers/clk/clk-sunxi.c b/drivers/clk/clk-sunxi.c
> new file mode 100644
> index 0000000..0e831b5
> --- /dev/null
> +++ b/drivers/clk/clk-sunxi.c
> @@ -0,0 +1,30 @@
> +/*
> + * Copyright 2012 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk/sunxi.h>
> +#include <linux/of.h>
> +
> +static const __initconst struct of_device_id clk_match[] = {
> +       { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
> +       {}
> +};
> +
> +void __init sunxi_init_clocks(void)
> +{
> +       of_clk_init(clk_match);
> +}
> diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
> new file mode 100644
> index 0000000..e074fdd
> --- /dev/null
> +++ b/include/linux/clk/sunxi.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright 2012 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LINUX_CLK_SUNXI_H_
> +#define __LINUX_CLK_SUNXI_H_
> +
> +void __init sunxi_init_clocks(void);
> +
> +#endif
> -- 
> 1.7.9.5