[PATCH 2/6] irqchip: sunxi: Add irq controller driver

Stefan Roese sr at denx.de
Fri Nov 16 02:35:27 EST 2012


On 11/15/2012 11:46 PM, Maxime Ripard wrote:

<snip>

> diff --git a/drivers/irqchip/irq-sunxi.c b/drivers/irqchip/irq-sunxi.c
> new file mode 100644
> index 0000000..9dcb323
> --- /dev/null
> +++ b/drivers/irqchip/irq-sunxi.c
> @@ -0,0 +1,173 @@
> +/*
> + * Allwinner A1X SoCs IRQ chip driver.
> + *
> + * Copyright (C) 2012 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * Based on code from
> + * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
> + * Benn Huang <benn at allwinnertech.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +
> +#include <linux/irqchip/sunxi.h>
> +
> +#define SUNXI_IRQ_PROTECTION_REG	0x08
> +#define SUNXI_IRQ_NMI_CTRL_REG		0x0c
> +#define SUNXI_IRQ_PENDING_REG(x)	(0x10 + 0x4 * x)
> +#define SUNXI_IRQ_FIQ_PENDING_REG(x)	(0x20 + 0x4 * x)
> +#define SUNXI_IRQ_ENABLE_REG(x)		(0x40 + 0x4 * x)
> +#define SUNXI_IRQ_MASK_REG(x)		(0x50 + 0x4 * x)
> +
> +static void __iomem *sunxi_irq_base;
> +static struct irq_domain *sunxi_irq_domain;
> +
> +void sunxi_irq_ack(struct irq_data *irqd)
> +{
> +	unsigned int irq = irqd_to_hwirq(irqd);
> +	unsigned int irq_off = irq % 32;
> +	int reg = irq / 32;
> +	u32 val;
> +
> +	val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
> +	writel(val & ~(1 << irq_off),
> +	       sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
> +
> +	val = readl(sunxi_irq_base + SUNXI_IRQ_MASK_REG(reg));
> +	writel(val | (1 << irq_off),
> +	       sunxi_irq_base + SUNXI_IRQ_MASK_REG(reg));
> +
> +	val = readl(sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg));
> +	writel(val | (1 << irq_off),
> +	       sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg));

Are you sure that you need to touch all those 23registers to ack the
interrupt? I know that the original code provided by Allwinner does
exactly this. My tests have shown though, that writing to the pending
reg is enough.

> +}
> +
> +static void sunxi_irq_mask(struct irq_data *irqd)
> +{
> +	unsigned int irq = irqd_to_hwirq(irqd);
> +	unsigned int irq_off = irq % 32;
> +	int reg = irq / 32;
> +	u32 val;
> +
> +	val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
> +	writel(val & ~(1 << irq_off),
> +	       sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
> +
> +	val = readl(sunxi_irq_base + SUNXI_IRQ_MASK_REG(reg));
> +	writel(val | (1 << irq_off),
> +	       sunxi_irq_base + SUNXI_IRQ_MASK_REG(reg));

I unmasked all interrupts in the mask register in the init function.
Then only using the enable register for masking/unmasking seems to be
enough. What do you think?

> +}
> +
> +static void sunxi_irq_unmask(struct irq_data *irqd)
> +{
> +	unsigned int irq = irqd_to_hwirq(irqd);
> +	unsigned int irq_off = irq % 32;
> +	int reg = irq / 32;
> +	u32 val;
> +
> +	val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
> +	writel(val | (1 << irq_off),
> +	       sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
> +
> +	val = readl(sunxi_irq_base + SUNXI_IRQ_MASK_REG(reg));
> +	writel(val & ~(1 << irq_off),
> +	       sunxi_irq_base + SUNXI_IRQ_MASK_REG(reg));
> +
> +	/* Must clear pending bit when enabled */
> +	if (irq == 0)
> +		writel(1, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(0));

Again. Might be that one register is enough here.

> +}
> +
> +static struct irq_chip sunxi_irq_chip = {
> +	.name		= "sunxi_irq",
> +	.irq_ack	= sunxi_irq_ack,
> +	.irq_mask	= sunxi_irq_mask,
> +	.irq_unmask	= sunxi_irq_unmask,
> +};
> +
> +static int sunxi_irq_map(struct irq_domain *d, unsigned int virq,
> +			 irq_hw_number_t hw)
> +{
> +	irq_set_chip(virq, &sunxi_irq_chip);
> +	irq_set_handler(virq, handle_level_irq);

irq_set_chip_and_handler()

> +	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
> +
> +	return 0;
> +}
> +
> +static struct irq_domain_ops sunxi_irq_ops = {
> +	.map = sunxi_irq_map,
> +	.xlate = irq_domain_xlate_onecell,
> +};
> +
> +static int __init sunxi_of_init(struct device_node *node,
> +				struct device_node *parent)
> +{
> +	sunxi_irq_base = of_iomap(node, 0);
> +	if (!sunxi_irq_base)
> +		panic("%s: unable to map IC registers\n",
> +			node->full_name);
> +
> +	/* Disable all interrupts */
> +	writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(0));
> +	writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(1));
> +	writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(2));
> +
> +	/* Mask all the interrupts */
> +	writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_MASK_REG(0));
> +	writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_MASK_REG(1));
> +	writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_MASK_REG(2));

Here is where I wrote 0 to the mask registers.

> +	/* Clear all the pending interrupts */
> +	writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(0));
> +	writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(1));
> +	writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(2));
> +
> +	/* Enable protection mode */
> +	writel(0x01, sunxi_irq_base + SUNXI_IRQ_PROTECTION_REG);
> +
> +	/* Configure the external interrupt source type */
> +	writel(0x00, sunxi_irq_base + SUNXI_IRQ_NMI_CTRL_REG);
> +
> +	sunxi_irq_domain = irq_domain_add_linear(node, 3 * 32,
> +						 &sunxi_irq_ops, NULL);
> +	if (!sunxi_irq_domain)
> +		panic("%s: unable to create IRQ domain\n", node->full_name);
> +
> +	return 0;
> +}
> +
> +static struct of_device_id sunxi_irq_dt_ids[] __initconst = {
> +	{ .compatible = "allwinner,sunxi-ic", .data = sunxi_of_init }
> +};
> +
> +void __init sunxi_init_irq(void)
> +{
> +	of_irq_init(sunxi_irq_dt_ids);
> +}
> +
> +asmlinkage void __exception_irq_entry sunxi_handle_irq(struct pt_regs *regs)
> +{
> +	u32 irq, reg;
> +	int i;
> +
> +	for (i = 0; i < 3; i++) {
> +		reg = readl(sunxi_irq_base + SUNXI_IRQ_PENDING_REG(i));
> +		if (reg == 0)
> +			continue;
> +		irq = ilog2(reg);
> +		break;
> +	}
> +	irq = irq_find_mapping(sunxi_irq_domain, irq);
> +	handle_IRQ(irq, regs);

Why don't you use the interrupt-vector register to get the active
interrupt source? Here is my version:

asmlinkage void __exception_irq_entry sunxi_handle_irq(struct pt_regs *regs)
{
	u32 irq;

	irq = readl(int_base + SW_INT_VECTOR_REG) >> 2;
	irq = irq_find_mapping(sunxi_vic_domain, irq);
	handle_IRQ(irq, regs);
}

I suggest you give it a try.

Cheers,
Stefan




More information about the linux-arm-kernel mailing list