[PATCH v3 6/7] usb: chipidea: udc: retire the flag CI13_PULLUP_ON_VBUS

[Peter Chen]

(change CI13XXX to CI13 to avoid junk email check)
Now, we have handled vbus session in core driver when the
vbus interrupt occurs, so our pullup operations are all
according to vbus.
Of cource, the software can still call .pullup when device connects
to host if it wants to connect/disconnect with host.

Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
 drivers/usb/chipidea/ci13xxx_imx.c |    1 -
 drivers/usb/chipidea/ci13xxx_msm.c |    1 -
 drivers/usb/chipidea/udc.c         |   23 ++++++++---------------
 include/linux/usb/chipidea.h       |    1 -
 4 files changed, 8 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 0f5ca4b..86671a3 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -88,7 +88,6 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
 static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
 	.name			= "ci13xxx_imx",
 	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
-				  CI13XXX_PULLUP_ON_VBUS |
 				  CI13XXX_DISABLE_STREAMING,
 	.capoffset		= DEF_CAPOFFSET,
 };
diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index b01feb3..cf74b62 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -49,7 +49,6 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
 	.name			= "ci13xxx_msm",
 	.flags			= CI13XXX_REGS_SHARED |
 				  CI13XXX_REQUIRE_TRANSCEIVER |
-				  CI13XXX_PULLUP_ON_VBUS |
 				  CI13XXX_DISABLE_STREAMING,
 
 	.notify_event		= ci13xxx_msm_notify_event,
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index f27507f..f4796c1 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1359,9 +1359,6 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 	unsigned long flags;
 	int gadget_ready = 0;
 
-	if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
-		return -EOPNOTSUPP;
-
 	spin_lock_irqsave(&ci->lock, flags);
 	ci->vbus_active = is_active;
 	if (ci->driver)
@@ -1425,8 +1422,7 @@ static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
 {
 	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 
-	if ((ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) &&
-			!ci->vbus_active)
+	if (!ci->vbus_active)
 		return -ENOTSUPP;
 
 	if (is_on)
@@ -1550,14 +1546,12 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 
 	ci->driver = driver;
 	pm_runtime_get_sync(&ci->gadget.dev);
-	if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
-		if (ci->vbus_active) {
-			if (ci->platdata->flags & CI13XXX_REGS_SHARED)
-				hw_device_reset(ci, USBMODE_CM_DC);
-		} else {
-			pm_runtime_put_sync(&ci->gadget.dev);
-			goto done;
-		}
+	if (ci->vbus_active) {
+		if (ci->platdata->flags & CI13XXX_REGS_SHARED)
+			hw_device_reset(ci, USBMODE_CM_DC);
+	} else {
+		pm_runtime_put_sync(&ci->gadget.dev);
+		goto done;
 	}
 
 	retval = hw_device_state(ci, ci->ep0out->qh.dma);
@@ -1580,8 +1574,7 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
 
 	spin_lock_irqsave(&ci->lock, flags);
 
-	if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
-			ci->vbus_active) {
+	if (ci->vbus_active) {
 		hw_device_state(ci, 0);
 		if (ci->platdata->notify_event)
 			ci->platdata->notify_event(ci,
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 544825d..37821b3 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -17,7 +17,6 @@ struct ci13xxx_platform_data {
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-#define CI13XXX_PULLUP_ON_VBUS		BIT(2)
 #define CI13XXX_DISABLE_STREAMING	BIT(3)
 
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
-- 
1.7.0.4