[PATCH 1/4] ARM: at91: dt: at91sam9: add mmc pinctrl support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Wed Nov 21 09:56:39 EST 2012
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 33 ++++++++++++++++++
arch/arm/boot/dts/at91sam9263.dtsi | 66 ++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 48 ++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9n12.dtsi | 24 +++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 32 +++++++++++++++++
5 files changed, 203 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index d7296d5..b1d3fab 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -272,6 +272,39 @@
};
};
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <0 8 0x1 0x0>; /* PA8 periph A */
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 6 0x1 0x1>; /* PA6 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 9 0x1 0x1 /* PA9 periph A with pullup */
+ 0 10 0x1 0x1 /* PA10 periph A with pullup */
+ 0 11 0x1 0x1>; /* PA11 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 1 0x2 0x1 /* PA1 periph B with pullup */
+ 0 0 0x2 0x1>; /* PA0 periph B with pullup */
+ };
+
+ pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 5 0x2 0x1 /* PA5 periph B with pullup */
+ 0 4 0x2 0x1 /* PA4 periph B with pullup */
+ 0 3 0x2 0x1>; /* PA3 periph B with pullup */
+ };
+ };
+
pioA: gpio at fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index eae6d16..66106ee 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -203,6 +203,72 @@
};
};
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <0 12 0x1 0x0>; /* PA12 periph A */
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 1 0x1 0x1 /* PA1 periph A with pullup */
+ 0 0 0x1 0x1>; /* PA0 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 3 0x1 0x1 /* PA3 periph A with pullup */
+ 0 4 0x1 0x1 /* PA4 periph A with pullup */
+ 0 5 0x1 0x1>; /* PA5 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 16 0x1 0x1 /* PA16 periph A with pullup */
+ 0 17 0x1 0x1>; /* PA17 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 18 0x1 0x1 /* PA18 periph A with pullup */
+ 0 19 0x1 0x1 /* PA19 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA20 periph A with pullup */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_clk: mmc1_clk-0 {
+ atmel,pins =
+ <0 6 0x1 0x0>; /* PA6 periph A */
+ };
+
+ pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 8 0x1 0x1>; /* PA8 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 9 0x1 0x1 /* PA9 periph A with pullup */
+ 0 10 0x1 0x1 /* PA10 periph A with pullup */
+ 0 11 0x1 0x1>; /* PA11 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 21 0x1 0x1 /* PA21 periph A with pullup */
+ 0 22 0x1 0x1>; /* PA22 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 23 0x1 0x1 /* PA23 periph A with pullup */
+ 0 24 0x1 0x1 /* PA24 periph A with pullup */
+ 0 25 0x1 0x1>; /* PA25 periph A with pullup */
+ };
+ };
+
pioA: gpio at fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 91607d2..0741cae 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -240,6 +240,54 @@
};
};
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 0 0x1 0x0 /* PA0 periph A */
+ 0 1 0x1 0x1 /* PA1 periph A with pullup */
+ 0 2 0x1 0x1>; /* PA2 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 3 0x1 0x1 /* PA3 periph A with pullup */
+ 0 4 0x1 0x1 /* PA4 periph A with pullup */
+ 0 5 0x1 0x1>; /* PA5 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 6 0x1 0x1 /* PA6 periph A with pullup */
+ 0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 8 0x1 0x1 /* PA8 periph A with pullup */
+ 0 9 0x1 0x1>; /* PA9 periph A with pullup */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 31 0x1 0x0 /* PA31 periph A */
+ 0 22 0x1 0x1 /* PA22 periph A with pullup */
+ 0 23 0x1 0x1>; /* PA23 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 24 0x1 0x1 /* PA24 periph A with pullup */
+ 0 25 0x1 0x1 /* PA25 periph A with pullup */
+ 0 26 0x1 0x1>; /* PA26 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 27 0x1 0x1 /* PA27 periph A with pullup */
+ 0 28 0x1 0x1 /* PA28 periph A with pullup */
+ 0 29 0x1 0x1 /* PA29 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA30 periph A with pullup */
+ };
+ };
+
pioA: gpio at fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 8d1fdfa..e9efb34 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -220,6 +220,30 @@
};
};
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 17 0x1 0x0 /* PA17 periph A */
+ 0 16 0x1 0x1 /* PA16 periph A with pullup */
+ 0 15 0x1 0x1>; /* PA15 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 18 0x1 0x1 /* PA18 periph A with pullup */
+ 0 19 0x1 0x1 /* PA19 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA20 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 11 0x2 0x1 /* PA11 periph B with pullup */
+ 0 12 0x2 0x1 /* PA12 periph B with pullup */
+ 0 13 0x2 0x1 /* PA13 periph B with pullup */
+ 0 14 0x2 0x1>; /* PA14 periph B with pullup */
+ };
+ };
+
pioA: gpio at fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 7f56b07..7ee49e8 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -250,6 +250,38 @@
};
};
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 17 0x1 0x0 /* PA17 periph A */
+ 0 16 0x1 0x1 /* PA16 periph A with pullup */
+ 0 15 0x1 0x1>; /* PA15 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 18 0x1 0x1 /* PA18 periph A with pullup */
+ 0 19 0x1 0x1 /* PA19 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA20 periph A with pullup */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 13 0x2 0x0 /* PA13 periph B */
+ 0 12 0x2 0x1 /* PA12 periph B with pullup */
+ 0 11 0x2 0x1>; /* PA11 periph B with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 2 0x2 0x1 /* PA2 periph B with pullup */
+ 0 3 0x2 0x1 /* PA3 periph B with pullup */
+ 0 4 0x2 0x1>; /* PA4 periph B with pullup */
+ };
+ };
+
pioA: gpio at fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
--
1.7.10.4
More information about the linux-arm-kernel
mailing list