[PATCH 2/4] ARM: at91: dt: add mmc pinctrl for Atmel reference boards
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Wed Nov 21 09:56:40 EST 2012
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/boot/dts/at91sam9263ek.dts | 15 +++++++++++++++
arch/arm/boot/dts/at91sam9g20ek_2mmc.dts | 14 ++++++++++++++
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/at91sam9m10g45ek.dts | 25 +++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9n12ek.dts | 13 +++++++++++++
arch/arm/boot/dts/at91sam9x5ek.dtsi | 24 ++++++++++++++++++++++++
6 files changed, 105 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 8e319bb..1eb0872 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -56,6 +56,11 @@
};
mmc0: mmc at fff80000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot0_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
status = "okay";
slot at 0 {
reg = <0>;
@@ -64,6 +69,16 @@
wp-gpios = <&pioE 19 0>;
};
};
+
+ pinctrl at fffff200 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */
+ 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */
+ };
+ };
+ };
};
nand0: nand at 40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
index 684b229..66467b1 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -15,12 +15,26 @@
ahb {
apb{
mmc0: mmc at fffa8000 {
+ /* clk already mux wuth slot0 */
+ pinctrl-0 = <
+ &pinctrl_board_mmc0_slot0
+ &pinctrl_mmc0_slot0_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
slot at 0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioC 2 0>;
};
};
+
+ pinctrl at fffff400 {
+ mmc0_slot0 {
+ pinctrl_board_mmc0_slot0: mmc0_slot0-board {
+ atmel,pins =
+ <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 0090015..32a500a 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -60,6 +60,11 @@
};
mmc0: mmc at fffa8000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0_slot1
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
status = "okay";
slot at 1 {
reg = <1>;
@@ -67,6 +72,15 @@
cd-gpios = <&pioC 9 0>;
};
};
+
+ pinctrl at fffff400 {
+ mmc0_slot1 {
+ pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+ atmel,pins =
+ <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
};
nand0: nand at 40000000 {
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 1fc299f..20c3191 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -60,6 +60,10 @@
};
mmc0: mmc at fff80000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
status = "okay";
slot at 0 {
reg = <0>;
@@ -69,6 +73,10 @@
};
mmc1: mmc at fffd0000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc1
+ &pinctrl_mmc1_slot0_clk_cmd_dat0
+ &pinctrl_mmc1_slot0_dat1_3>;
status = "okay";
slot at 0 {
reg = <0>;
@@ -77,6 +85,23 @@
wp-gpios = <&pioD 29 0>;
};
};
+
+ pinctrl at fffff200 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */
+ };
+ };
+
+ mmc1 {
+ pinctrl_board_mmc1: mmc1-board {
+ atmel,pins =
+ <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */
+ 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */
+ };
+ };
+ };
};
nand0: nand at 40000000 {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 3d165bc..0376bf4 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -47,6 +47,10 @@
};
mmc0: mmc at f0008000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
status = "okay";
slot at 0 {
reg = <0>;
@@ -54,6 +58,15 @@
cd-gpios = <&pioA 7 0>;
};
};
+
+ pinctrl at fffff400 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
};
nand0: nand at 40000000 {
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index e042b5e..8a7cf1d 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -19,6 +19,10 @@
ahb {
apb {
mmc0: mmc at f0008000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
status = "okay";
slot at 0 {
reg = <0>;
@@ -28,6 +32,10 @@
};
mmc1: mmc at f000c000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc1
+ &pinctrl_mmc1_slot0_clk_cmd_dat0
+ &pinctrl_mmc1_slot0_dat1_3>;
status = "okay";
slot at 0 {
reg = <0>;
@@ -60,6 +68,22 @@
i2c2: i2c at f8018000 {
status = "okay";
};
+
+ pinctrl at fffff400 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */
+ };
+ };
+
+ mmc1 {
+ pinctrl_board_mmc1: mmc1-board {
+ atmel,pins =
+ <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
};
usb0: ohci at 00600000 {
--
1.7.10.4
More information about the linux-arm-kernel
mailing list