[PATCH 2/3] ARM: shmobile: marzen: add USB EHCI driver support

Simon Horman horms at verge.net.au
Wed Nov 7 03:40:06 EST 2012


From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

This patch supports CN21/CN22 USB 2.0 (port 0/1/2),
and enable USB momery on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Signed-off-by: Simon Horman <horms at verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    6 ++
 arch/arm/mach-shmobile/Kconfig        |    1 +
 arch/arm/mach-shmobile/board-marzen.c |  108 ++++++++++++++++++++++++++++++++-
 3 files changed, 114 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 8a861b7..6540dfb 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -47,6 +47,8 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -82,6 +84,10 @@ CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index f58c3ea..c03aeec 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -41,6 +41,7 @@ config ARCH_R8A7779
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select USB_ARCH_HAS_EHCI
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 74c7f0b..707b3bd 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -34,6 +34,9 @@
 #include <linux/spi/sh_hspi.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -172,6 +175,101 @@ static struct platform_device *marzen_devices[] __initdata = {
 	&usb_phy_device,
 };
 
+/* USB */
+static struct usb_phy *phy;
+static int usb_power_on(struct platform_device *pdev)
+{
+	if (!phy)
+		return -EIO;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	usb_phy_init(phy);
+
+	return 0;
+}
+
+static void usb_power_off(struct platform_device *pdev)
+{
+	if (!phy)
+		return;
+
+	usb_phy_shutdown(phy);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+}
+
+static struct usb_ehci_pdata ehcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ehci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70000,
+		.end	= 0xffe70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(44),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci0_device = {
+	.name	= "ehci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci0_resources),
+	.resource	= ehci0_resources,
+};
+
+static struct resource ehci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70000,
+		.end	= 0xfff70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(45),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci1_device = {
+	.name	= "ehci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci1_resources),
+	.resource	= ehci1_resources,
+};
+
+static struct platform_device *marzen_late_devices[] __initdata = {
+	&ehci0_device,
+	&ehci1_device,
+};
+
+void __init marzen_init_late(void)
+{
+	/* get usb phy */
+	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	shmobile_init_late();
+	platform_add_devices(marzen_late_devices,
+			     ARRAY_SIZE(marzen_late_devices));
+}
+
 static void __init marzen_init(void)
 {
 	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
@@ -209,6 +307,14 @@ static void __init marzen_init(void)
 	gpio_request(GPIO_FN_HSPI_TX0,	NULL);
 	gpio_request(GPIO_FN_HSPI_RX0,	NULL);
 
+	/* USB (CN21) */
+	gpio_request(GPIO_FN_USB_OVC0, NULL);
+	gpio_request(GPIO_FN_USB_OVC1, NULL);
+	gpio_request(GPIO_FN_USB_OVC2, NULL);
+
+	/* USB (CN22) */
+	gpio_request(GPIO_FN_USB_PENC2, NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
@@ -221,6 +327,6 @@ MACHINE_START(MARZEN, "marzen")
 	.init_irq	= r8a7779_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= marzen_init,
-	.init_late	= shmobile_init_late,
+	.init_late	= marzen_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
-- 
1.7.10.4




More information about the linux-arm-kernel mailing list