[PATCHv9 0/3] Runtime Interpreted Power Sequences

Alexandre Courbot acourbot at nvidia.com
Sat Nov 17 05:55:44 EST 2012


Apologies for sending two patchsets in two days - the main purpose
of this new revision is to add the linux-arm-kernel list to the
audience. A few suggestions from v8 have also been added.

Changelog from v8:
- Compile resource support into different compilation units
- Check that resource support is compiled in when resolving sequences
- Now compilable as a module
- Renamed source files to avoid repeated power_seq in their path
- Add linux-arm-kernel list to audience as suggested by Mark Rutland

Alexandre Courbot (3):
  Runtime Interpreted Power Sequences
  pwm_backlight: use power sequences
  Take maintainership of power sequences

 .../devicetree/bindings/power/power_seq.txt        | 121 +++++++
 .../bindings/video/backlight/pwm-backlight.txt     |  63 +++-
 Documentation/power/power_seq.txt                  | 253 ++++++++++++++
 MAINTAINERS                                        |  10 +
 drivers/power/Kconfig                              |   1 +
 drivers/power/Makefile                             |   1 +
 drivers/power/power_seq/Kconfig                    |   2 +
 drivers/power/power_seq/Makefile                   |   2 +
 drivers/power/power_seq/core.c                     | 362 +++++++++++++++++++++
 drivers/power/power_seq/delay.c                    |  66 ++++
 drivers/power/power_seq/gpio.c                     |  95 ++++++
 drivers/power/power_seq/power_seq_priv.h           |  56 ++++
 drivers/power/power_seq/pwm.c                      |  85 +++++
 drivers/power/power_seq/regulator.c                |  87 +++++
 drivers/video/backlight/Kconfig                    |   1 +
 drivers/video/backlight/pwm_bl.c                   | 160 +++++++--
 include/linux/power_seq.h                          | 203 ++++++++++++
 include/linux/pwm_backlight.h                      |  18 +-
 18 files changed, 1546 insertions(+), 40 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/power_seq.txt
 create mode 100644 Documentation/power/power_seq.txt
 create mode 100644 drivers/power/power_seq/Kconfig
 create mode 100644 drivers/power/power_seq/Makefile
 create mode 100644 drivers/power/power_seq/core.c
 create mode 100644 drivers/power/power_seq/delay.c
 create mode 100644 drivers/power/power_seq/gpio.c
 create mode 100644 drivers/power/power_seq/power_seq_priv.h
 create mode 100644 drivers/power/power_seq/pwm.c
 create mode 100644 drivers/power/power_seq/regulator.c
 create mode 100644 include/linux/power_seq.h

-- 
1.8.0




More information about the linux-arm-kernel mailing list