OMAP* Latest build failures

[Tony Lindgren]

* Tony Lindgren <tony at atomide.com> [121114 09:02]:
> * Tony Lindgren <tony at atomide.com> [121114 08:50]:
> > * Tomi Valkeinen <tomi.valkeinen at ti.com> [121114 03:47]:
> > > On 2012-11-14 11:26, Russell King - ARM Linux wrote:
> > > > OMAP* allnoconfig fails:
> > > > 
> > > > arch/arm/mach-omap2/built-in.o: In function `omap_dss_set_min_bus_tput':
> > > > twl-common.c:(.text+0x1e08): undefined reference to `omap_pm_set_min_bus_tput'
> > > > arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_init_postsetup':
> > > > twl-common.c:(.init.text+0x8f8): undefined reference to `omap_pm_if_early_init'
> > > > arch/arm/mach-omap2/built-in.o: In function `omap_serial_init_port':
> > > > twl-common.c:(.init.text+0x1284): undefined reference to `omap_pm_get_dev_context_loss_count'
> > > > arch/arm/mach-omap2/built-in.o: In function `omap_timer_init':
> > > > twl-common.c:(.init.text+0x1544): undefined reference to `omap_pm_get_dev_context_loss_count'
> > > > arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_init':
> > > > twl-common.c:(.init.text+0x1af0): undefined reference to `omap_pm_if_init'
> > > > arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init':
> > > > twl-common.c:(.init.text+0x2168): undefined reference to `omap_pm_get_dev_context_loss_count'
> > > > arch/arm/mach-omap2/built-in.o: In function `omap_display_init':
> > > > twl-common.c:(.init.text+0x25cc): undefined reference to `omap_pm_get_dev_context_loss_count'
> > > 
> > > I'm not able to reproduce this. I took v3.7-rc5, and the omap4430-sdp
> > > noconfig
> > > (http://www.arm.linux.org.uk/developer/build/file.php?type=config&idx=2711),
> > > and it builds fine for me.
> > 
> > It happens if in arm-soc/for-next and rmk/for-next. Looks like the
> > CONFIG_OMAP_PM_NOOP can't be under CONFIG_PM in the makefile where I moved it
> > in commit 6e740f9a8.
> 
> This should say just "It happens in arm-soc/for-next".
>  
> > Looks like in my test configs I run make oldnoconfig on Russell's seed
> > config, and I do get CONFIG_PM=y set while Russell's generated config
> > does not have that. No ideas yet why oldnoconfig add CONFIG_PM=y..

Looks like the way to do this not to use oldnoconfig but to do:

$ make KCONFIG_ALLCONFIG=../configs/rmk-omap4430-sdp-noconfig allnoconfig

It seems that oldnoconfig will pick the new options that have default y?

Regards,

Tony